From: Markus Schaber <markus.schaber@student.uni-ulm.de>
To: linux-kernel@vger.kernel.org
Subject: Re: AHA-154X/1535 not recognized any more [Repost]
Date: Tue, 24 Apr 2001 13:53:22 +0200 [thread overview]
Message-ID: <3AE56932.A62BF389@student.uni-ulm.de> (raw)
As my original message seems to have disappeared, here a Repost:
-------- Original Message --------
Subject: Re: AHA-154X/1535 not recognized any more
Date: Fri, 20 Apr 2001 14:28:14 +0200 (MEST)
From: Markus Schaber <markus.schaber@student.uni-ulm.de>
To: "Rafael E. Herrera" <raffo@neuronet.pitt.edu>
CC: Markus Schaber <markus.schaber@student.uni-ulm.de>,Alan Cox
<alan@lxorguk.ukuu.org.uk>,Linux Kernel Mailing List
<linux-kernel@vger.kernel.org>
On Wed, 18 Apr 2001, Rafael E. Herrera wrote:
> > lunix:~# isapnp pnpconfig.txt
> > Board 1 has Identity 08 0f 6d b9 45 42 15 90 04: ADP1542 Serial No 258849093 [checksum 08]
> > pnptext:60 -- Fatal - IO range check attempted while device activated
> > pnptext:60 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted
>
> I've a pnp sound card that fails to configure with a similar error
> message when a (CHECK) entry was found in an (IO ...) block. Removing
> those entries solved the problem. Try this in your pnpconfig.txt:
>
> (IO 0 (SIZE 4) (BASE 0x0330))
In this case, isapnp configures the card.
Using a modularized kernel, modprobe also loads the driver without any
further parameters:
lunix:/home/schabi/public_html/scsi# /rescue/sbin/isapnp
pnpconfig_nocheck.txt
Board 1 has Identity 08 0f 6d b9 45 42 15 90 04: ADP1542 Serial No
258849093 [checksum 08]
ADP1542/258849093[0]{SCSI Host Adapter }: Port 0x330; IRQ10 DMA0 ---
Enabled OK
lunix:/home/schabi/public_html/scsi# modprobe aha1542
lunix:/home/schabi/public_html/scsi#
ls /proc/scsi
advansys aha1542 ide-scsi scsi sg
lunix:/home/schabi/public_html/scsi# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: 03.H
Type: Direct-Access ANSI SCSI revision: ffffffff
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SCR-3231 Rev: S104
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: IOMEGA Model: ZIP 100 PLUS Rev: J.66
Type: Direct-Access ANSI SCSI revision: 02
So the isapnp tools can configure the card correctly.
markus
next reply other threads:[~2001-04-24 11:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-24 11:53 Markus Schaber [this message]
2001-04-26 10:25 ` The further way? (was: Re: AHA-154X/1535 not recognized any more) Markus Schaber
-- strict thread matches above, loose matches on Subject: below --
2001-04-24 11:52 AHA-154X/1535 not recognized any more [Repost] Markus Schaber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3AE56932.A62BF389@student.uni-ulm.de \
--to=markus.schaber@student.uni-ulm.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox