Re: pcmcia problems after upgrading from 2.4.3-ac7 to 2.4.4

["Martin.Knoblauch" <Martin.Knoblauch@TeraPort.de>]

[-- Attachment #1: Type: text/plain, Size: 1038 bytes --]

Alan Cox wrote:
> 
> >  my DE-620 pccard stopped working after upgrading the kernel from
> > 2.4.3-ac7 to 2.4.4. This is on a Toshiba 4080XCDT. I used the "good"
> > .config from the 2.4.3-ac7 build to do a make "oldconfig". The symptoms
> > at startup are:
> 
> 2.4.4 has older pcmcia than 2.4.3-ac7. It might be that. Does 2.4.4-ac work ?

 just some additional info. The card actually stopped working in
2.4.3-a11 upwards with the same symptoms as in my original request.

 2.4.3-ac9 is the last working one. Not sure about -ac10, because that
one crashes during boot (not related to pcmcia as far as I can
remember). So, what was added in ac11 or ac10 that could hurt pcmcia or
the i82365 module?

 I'll now try 2.4.4-ac4.

Martin
-- 
------------------------------------------------------------------
Martin Knoblauch         |    email:  Martin.Knoblauch@TeraPort.de
TeraPort GmbH            |    Phone:  +49-89-510857-309
IT Services              |    Fax:    +49-89-510857-111
http://www.teraport.de   |    Mobile: +49-170-4904759

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: Card for Martin.Knoblauch --]
[-- Type: text/x-vcard; charset=us-ascii; name="Martin.Knoblauch.vcf", Size: 381 bytes --]

begin:vcard 
n:Knoblauch;Martin
tel;cell:+49-170-4904759
tel;fax:+49-89-510857-111
tel;work:+49-89-510857-309
x-mozilla-html:FALSE
url:http://www.teraport.de
org:TeraPort GmbH;IT-Services
adr:;;Garmischer Straße 4;München;Bayern;D-80339;Germany
version:2.1
email;internet:Martin.Knoblauch@TeraPort.de
title:Senior System Engineer
x-mozilla-cpt:;32160
fn:Martin Knoblauch
end:vcard