Re: I810 Sound broke between 2.4.2 and 2.4.3

[Doug Ledford <dledford@redhat.com>]

Ben Castricum wrote:
> 
> I use amp to play my mp3s and it seem to stop functioning since 2.4.3. I
> captured the kernel messages from the module :
> 
> --- 2.4.2 ---
> Intel 810 + AC97 Audio, version 0.01, 14:04:06 Jun  4 2001
> PCI: Found IRQ 10 for device 00:1f.5
> PCI: The same IRQ used for device 00:1f.3
> PCI: The same IRQ used for device 01:09.0
> PCI: Setting latency timer of device 00:1f.5 to 64
> i810: Intel ICH 82801AA found at IO 0xe100 and 0xe000, IRQ 10
> ac97_codec: AC97 Audio codec, id: 0x4144:0x5340 (Analog Devices AD1881)
> i810_audio: Codec refused to allow VRA, using 48Khz only.
> 
> --- 2.4.3 ---
> Intel 810 + AC97 Audio, version 0.01, 14:18:58 Jun  4 2001
> PCI: Found IRQ 10 for device 00:1f.5
> PCI: The same IRQ used for device 00:1f.3
> PCI: The same IRQ used for device 01:09.0
> PCI: Setting latency timer of device 00:1f.5 to 64
> i810: Intel ICH 82801AA found at IO 0xe100 and 0xe000, IRQ 10
> ac97_codec: AC97 Audio codec, id: 0x4144:0x5340 (Analog Devices AD1881)
> i810_audio: Codec refused to allow VRA, using 48Khz only.
> i810_audio: 9576 bytes in 50 milliseconds
> 
> an strace of amp seems to halt on writing to the /dev/dsp
> 
> I have an Intel Celeron on an Asus-MEW motherboard which has this soundcard
> integrated.
> 
> Any ideas?

Can you try xmms with the oss output module and tell me if that works?

-- 

 Doug Ledford <dledford@redhat.com>  http://people.redhat.com/dledford
      Please check my web site for aic7xxx updates/answers before
                      e-mailing me about problems