From: David Ford <david@blue-labs.org>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Cleanup kbuild for aic7xxx
Date: Fri, 22 Jun 2001 21:58:59 -0700 [thread overview]
Message-ID: <3B342213.9020603@blue-labs.org> (raw)
In-Reply-To: <200106230307.f5N370U83109@aslan.scsiguy.com>
Here is 2.4.5 plain with the old aic driver.
(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/1
(scsi0) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/0
(scsi1) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
And then it breaks.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Inquiry 00 00 00 ff 00
(scsi0:0:0:0) Aborting scb 0, flags 0x6
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) Sending WDTR message.
(scsi0:0:0:0) Reset called, scb 0, flags 0x16
(scsi0:0:0:0) Bus Device reset, scb flags 0x16, Message-Out phase
(scsi0:0:0:0) SCSISIGI 0xb6, SEQADDR 0xbd, SSTAT0 0x2, SSTAT1 0x3
(scsi0:0:0:0) Queueing device reset command.
(scsi0:-1:-1:-1) 0 commands found and queued for completion.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) Reset called, scb 0, flags 0x1076
(scsi0:0:-1:-1) Reset channel called, will initiate reset.
(scsi0:0:-1:-1) Resetting currently active channel.
(scsi0:0:-1:-1) Channel reset
(scsi0:0:-1:-1) Reset device, active_scb 0
(scsi0:0:0:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:1:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:2:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:3:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:4:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:5:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:6:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:8:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:9:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:10:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:11:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:12:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:13:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:14:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:15:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:-1:-1) Cleaning QINFIFO.
(scsi0:0:-1:-1) Cleaning waiting_scbs.
(scsi0:0:-1:-1) Cleaning waiting for selection list.
(scsi0:0:-1:-1) Cleaning disconnected scbs list.
(scsi0:0:0:0) Aborting scb 0
(scsi0:0:0:0) Aborting scb 1
(scsi0:-1:-1:-1) 2 commands found and queued for completion.
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) Sending WDTR message.
(scsi0:0:0:0) Reset called, scb 0, flags 0x6
(scsi0:0:0:0) Bus Device reset, scb flags 0x6, Message-Out phase
(scsi0:0:0:0) SCSISIGI 0xb6, SEQADDR 0xbd, SSTAT0 0x2, SSTAT1 0x3
(scsi0:0:0:0) Queueing device reset command.
(scsi0:-1:-1:-1) 0 commands found and queued for completion.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
And it happily loops on this over and over.
David
next prev parent reply other threads:[~2001-06-23 4:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-22 17:52 Cleanup kbuild for aic7xxx Keith Owens
2001-06-22 19:39 ` Justin T. Gibbs
2001-06-23 0:50 ` Keith Owens
2001-06-23 1:20 ` J . A . Magallon
2001-06-23 1:54 ` Keith Owens
2001-06-23 2:38 ` Justin T. Gibbs
2001-06-23 4:19 ` D. Stimits
2001-06-23 1:32 ` David Ford
2001-06-23 2:46 ` Justin T. Gibbs
2001-06-23 2:57 ` David Ford
2001-06-23 3:07 ` Justin T. Gibbs
2001-06-23 3:57 ` David Ford
2001-06-23 5:10 ` Justin T. Gibbs
2001-06-23 4:41 ` David Ford
2001-06-23 5:11 ` Justin T. Gibbs
2001-06-23 5:58 ` [working] Re: Cleanup kbuild for aic7xxx (attn: Alan & Doug) David Ford
2001-06-23 4:58 ` David Ford [this message]
2001-06-23 2:34 ` Cleanup kbuild for aic7xxx Justin T. Gibbs
2001-06-23 5:22 ` Keith Owens
2001-06-25 18:22 ` Justin T. Gibbs
2001-06-26 2:34 ` Keith Owens
2001-06-26 4:27 ` Justin T. Gibbs
2001-06-23 4:17 ` D. Stimits
2001-06-23 4:54 ` Keith Owens
2001-06-23 5:14 ` Justin T. Gibbs
2001-06-23 5:34 ` Keith Owens
2001-06-23 5:04 ` Justin T. Gibbs
2001-06-23 5:41 ` D. Stimits
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B342213.9020603@blue-labs.org \
--to=david@blue-labs.org \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox