Re: 2.4.6.-ac2: Problems with eepro100

[Martin Knoblauch <Martin.Knoblauch@TeraPort.de>]

Martin Knoblauch wrote:
> 
> Hi,
> 
>  after going from 2.4.6-ac1 to 2.4.6-ac2 the eepro100 adapter in my IBM
> Thinkpad-570 has stopped working. While "ifconfig" shows the expected
> info, nothing network related (ping, yp, bind, amd, ...) is working. In
> my config, the eepro driver is built directly into the kernel.
> 
>  If I look at the interface lights, it seems that the link goes down
> early in the boot sequence. The whole thing is reproducible. When
> booting -ac1 again, everything is OK.
> 

 additional datapoint: if I use "eepro100.c" from vanilla 2.4.6, the
interface works OK. So, maybe the problems are power-managment related,
as the eepro100 differences in -ac2 seem to concern that area.

Martin
-- 
------------------------------------------------------------------
Martin Knoblauch         |    email:  Martin.Knoblauch@TeraPort.de
TeraPort GmbH            |    Phone:  +49-89-510857-309
C+ITS                    |    Fax:    +49-89-510857-111
http://www.teraport.de   |    Mobile: +49-170-4904759