ADAPTEC AHA 29160N

ADAPTEC AHA 29160N

[Igor Maciel Macaúbas]

Hello Everybody,
I'm in trouble with this SCSI controller.
I tried, but it's impossible to set up some version of linux with this SCSI
controller.
I need help .. is this device supported by the actual version of kernels?
What the hell is happening?
I've tried to install Mandrake (8.0), Red Hat (5.1, 6.0, 6.2), tried with
Debian too, and will try with Redhat 7.0 and 7.1
How can I get it working?

[]'z
Igor
--
igor@br.inter.net
igor@nlink.com.br

Re: ADAPTEC AHA 29160N

[D. Stimits]

Igor Maciel Macaúbas wrote:
> 
> Hello Everybody,
> I'm in trouble with this SCSI controller.
> I tried, but it's impossible to set up some version of linux with this SCSI
> controller.
> I need help .. is this device supported by the actual version of kernels?
> What the hell is happening?
> I've tried to install Mandrake (8.0), Red Hat (5.1, 6.0, 6.2), tried with
> Debian too, and will try with Redhat 7.0 and 7.1
> How can I get it working?
> 
> []'z
> Igor
> --
> igor@br.inter.net
> igor@nlink.com.br
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

I don't know about this separate version of the controller, but the
integrated versions of the 29160 work with the aic7xxx controller. There
was some discussion a while back about the "rebuild firmware" option
during kernel config, I suspect on regular and current kernels it is not
needed; it was, however, required on some of the XFS patched kernels. Is
the "N" version the 32 bit pci version (as opposed to the 64 bit pci
slot versions)? If it fails to work, I'd wonder more if it is a pci
setup issue than aic7xxx.

D. Stimits, stimits@idcomm.com

Re: ADAPTEC AHA 29160N

[Jussi Laako]

Igor Maciel Macaúbas wrote:
> 
> I've tried to install Mandrake (8.0), Red Hat (5.1, 6.0, 6.2), tried with
> Debian too, and will try with Redhat 7.0 and 7.1
> How can I get it working?

Works for me, RedHat 6.2, kernels up to 2.4.5. Haven't installed 2.4.6 yet.

 - Jussi Laako

-- 
PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B  39DD A4DE 63EB C216 1E4B
Available at PGP keyservers