From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 30 Jul 2001 20:29:58 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 30 Jul 2001 20:29:48 -0400 Received: from cx97923-a.phnx3.az.home.com ([24.9.112.194]:31883 "EHLO grok.yi.org") by vger.kernel.org with ESMTP id ; Mon, 30 Jul 2001 20:29:44 -0400 Message-ID: <3B65FBFB.D1C0AB0@candelatech.com> Date: Mon, 30 Jul 2001 17:29:47 -0700 From: Ben Greear Organization: Candela Technologies X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.7 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-kernel Subject: File system error: Input/output error Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Original-Recipient: rfc822;linux-kernel-outgoing I was testing an adaptec 4-port in a RH 7.1 machine running the 2.4.7 kernel. The Adaptec card caused the system to hang hard, so I had to power down. I tried 3 times to get the adaptec to work, locking the machine hard each time... But, that isn't the real problem... Now, when I boot the system, things seem to work, except for one problem: I cannot access /etc/modules.conf. I can't remove, edit, more, or cat it. I can't run ls on it... Every operation complains of Input/output error, for example: [root@lf1 /root]# more /etc/modules.conf /etc/modules.conf: Input/output error I tried rebooting back to RH's 2.4.3+ kernel, and I get the same problem. I tried going to single-user and doing an fsck, but fsck says everything is fine... Any ideas before I have to install this thing from scratch? Thanks, Ben -- Ben Greear President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear