From: Bojan Smojver <bojan@binarix.com>
To: linux-kernel@vger.kernel.org
Subject: ftape: kernel panic
Date: Wed, 01 Aug 2001 10:14:37 +1000 [thread overview]
Message-ID: <3B6749ED.7E0E6E2D@binarix.com> (raw)
I've discovered this purely by accident but it happened to me twice
already and on different kernels (2.2.x) and 2.4.7. The drive in
question is Seagate 8 GB internal ATAPI drive. I have had it on an Intel
VX430 chipset motherboard, kernel 2.2.x and now I have on an SiS 5571
chipset motherboard, running 2.4.7.
The problem occurs whey I attempted (by mistake) to write QTR-1 tape in
a Travan 4 drive. The kernel panics. When attempting to read the QTR-1
tape, an error about getting too much data starts occurring and then
there is 'lost interrupt' message as well. This doesn't cause kernel
panic. Writing/reading 8 GB cartridges is perfectly fine.
It is very easy to replicate the problem (happens every time) by doing
the above. I used tar to write to the tape.
This is not necessarily very important, but it might save someone a few
headaches when they insert QTR-1 tape into a Travan 4 drive by mistake
or on purpose. Especially if the machine is otherwise important and is
not supposed to be rebooted :-)
Bojan
PS. Bojan's Law: "All tape cartridges look the same at 6:30 am".
reply other threads:[~2001-08-01 0:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B6749ED.7E0E6E2D@binarix.com \
--to=bojan@binarix.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox