From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 9 Aug 2001 12:29:25 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 9 Aug 2001 12:29:10 -0400 Received: from [145.254.149.62] ([145.254.149.62]:62960 "HELO schottelius.org") by vger.kernel.org with SMTP id ; Thu, 9 Aug 2001 12:28:54 -0400 Message-ID: <3B72BA01.34D2A67F@pcsystems.de> Date: Thu, 09 Aug 2001 18:27:45 +0200 From: Nico Schottelius X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.7 i686) X-Accept-Language: en MIME-Version: 1.0 To: Linux Kernel Mailing List Subject: multiply NULL pointer Content-Type: multipart/mixed; boundary="------------738DD08108C0D11FE493C9FC" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello! Running a p2 400 mhz box with a 3com 3c905, with _very_ heavy nfs traffic and disc io the following NULL pointers were produced. I attached the whole dmesg output. If more informations are needed, I will send them. After every NULL pointer printed on the console I took a new dmesg, so the one with the highest number should be relevant. The file PSAUX_DMESG2 shows what was still living after DMESG2. Sincerly, Nico --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="DMESG" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="DMESG" Linux version 2.4.7 (root@eiche) (gcc version 2.95.2 19991024 (release)) #4 Tue Oct 2 16:55:42 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=new ro root=801 vga=0x0301 nmi_watchdog=1 Initializing CPU#0 Detected 399.323 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 796.26 BogoMIPS Memory: 255276k/262144k available (1254k kernel code, 6484k reserved, 434k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 03 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 ACPI: APM is already active, exiting rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE6000000) Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 169493kB/56497kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV3064D, ATA DISK drive hdc: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: HP Model: HP35480A Rev: T503 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:A:4): 5.000MB/s transfers (5.000MHz, offset 8) st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 192k freed Adding Swap: 205816k swap-space (priority -1) EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400, 00:60:08:50:b3:45, IRQ 10 product code 4b4b rev 00.0 date 08-12-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: first available media type: MII i2c-core.o: i2c core module piix4.o version 2.5.5 (20010115) i2c-core.o: adapter SMBus PIIX4 adapter at 5000 registered as adapter 0. i2c-piix4.o: PIIX4 bus detected and initialized i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-dev.o: Registered 'SMBus PIIX4 adapter at 5000' as minor 0 i2c-isa.o version 2.5.5 (20010115) i2c-dev.o: Registered 'ISA main adapter' as minor 1 i2c-core.o: adapter ISA main adapter registered as adapter 1. i2c-isa.o: ISA bus access for i2c modules initialized. i2c-core.o: I2C adapter 40000: I2C level transfers not supported i2c-core.o: I2C adapter 50000: I2C level transfers not supported Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: c012f5e6 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[] EFLAGS: 00010286 eax: cce1ff00 ebx: 00000003 ecx: cd58b4c0 edx: 00000000 esi: cd58b4c0 edi: 00000000 ebp: c15de000 esp: c15dffa4 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 8, stackpage=c15df000) Stack: 00000003 c01300d5 cd58b4c0 00000000 00003607 00000000 c0131d87 cd58b4c0 c15de000 c0244877 c15de23b 0008e000 cd58b4c0 c0131e3e 00000001 c01320a5 00010f00 c15f7fb0 c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] [] [] Code: 89 42 24 8b 44 24 0c c1 e0 02 bb 0c 6c 2e c0 89 c2 39 0c 1a Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: c012f5e6 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[] EFLAGS: 00010286 eax: caf7ef00 ebx: 00000003 ecx: cd58b4c0 edx: 00000000 esi: cd58b4c0 edi: 00000000 ebp: c15e0000 esp: c15e1fa8 ds: 0018 es: 0018 ss: 0018 Process bdflush (pid: 7, stackpage=c15e1000) Stack: 00000003 c01300d5 cd58b4c0 00000000 0000422b 00000000 c0131d87 cd58b4c0 c15e0000 c024486e c15e023a 0008e000 cd58b4c0 c0131f95 00000000 00010f00 c15f7fbc c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] [] Code: 89 42 24 8b 44 24 0c c1 e0 02 bb 0c 6c 2e c0 89 c2 39 0c 1a Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: c012f5e6 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[] EFLAGS: 00010282 eax: cc574e40 ebx: 00000003 ecx: cd58b4c0 edx: 00000000 esi: cd58b4c0 edi: 00000000 ebp: cf532000 esp: cf533e80 ds: 0018 es: 0018 ss: 0018 Process rpc.nfsd (pid: 225, stackpage=cf533000) Stack: 00000003 c01300d5 cd58b4c0 00000000 000084ae 00000000 c0131d87 cd58b4c0 cc574e40 00001000 00000001 00000000 cd58b4c0 c0131e22 00000000 c0130014 00000001 c0130c9d 00000301 00001000 c3205260 00013000 00000000 cc574e40 Call Trace: [] [] [] [] [] [] [] [] [] [] [] Code: 89 42 24 8b 44 24 0c c1 e0 02 bb 0c 6c 2e c0 89 c2 39 0c 1a Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010013 eax: cd58b508 ebx: 00000000 ecx: 00000001 edx: cd58b50c esi: cd58b508 edi: fffffff8 ebp: cd297ef4 esp: cd297ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 1928, stackpage=cd297000) Stack: cd58b4c0 cd58b508 000109a1 cd58b50c 00000001 00000282 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8ac 00000000 00004da0 40092d30 00000000 cd296000 00000004 c0110034 bffff87c c411f009 cffe463c cd296000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010013 eax: cd58b508 ebx: 00000000 ecx: 00000001 edx: cd58b50c esi: cd58b508 edi: fffffff8 ebp: cd297ef4 esp: cd297ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 1929, stackpage=cd297000) Stack: cd58b4c0 cd58b508 0001099f cd58b50c 00000001 00000282 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8ac 00000000 000049e0 40092d30 00000000 cd296000 00000004 c0110034 bffff87c c411f009 cffe463c cd296000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="DMESG2" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="DMESG2" Linux version 2.4.7 (root@eiche) (gcc version 2.95.2 19991024 (release)) #4 Tue Oct 2 16:55:42 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=new ro root=801 vga=0x0301 nmi_watchdog=1 Initializing CPU#0 Detected 399.322 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 796.26 BogoMIPS Memory: 255276k/262144k available (1254k kernel code, 6484k reserved, 434k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 03 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 ACPI: APM is already active, exiting rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE6000000) Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 169493kB/56497kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV3064D, ATA DISK drive hdc: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: HP Model: HP35480A Rev: T503 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:A:4): 5.000MB/s transfers (5.000MHz, offset 8) st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 192k freed Adding Swap: 205816k swap-space (priority -1) EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:01) ... reiserfs: replayed 23 transactions in 9 seconds Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:03) ... reiserfs: replayed 23 transactions in 4 seconds Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400, 00:60:08:50:b3:45, IRQ 10 product code 4b4b rev 00.0 date 08-12-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: first available media type: MII nmap uses obsolete (PF_INET,SOCK_PACKET) Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00002f8f ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15de000 esp: c15dffc4 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 8, stackpage=c15df000) Stack: c15de000 c0244877 c15de23b 0008e000 00000000 c0131e3e 00000001 c01320a5 00010f00 c15f7fb0 c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00004216 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15e0000 esp: c15e1fc8 ds: 0018 es: 0018 ss: 0018 Process bdflush (pid: 7, stackpage=c15e1000) Stack: c15e0000 c024486e c15e023a 0008e000 00000000 c0131f95 00000000 00010f00 c15f7fbc c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="DMESG3" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="DMESG3" Linux version 2.4.7 (root@eiche) (gcc version 2.95.2 19991024 (release)) #4 Tue Oct 2 16:55:42 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=new ro root=801 vga=0x0301 nmi_watchdog=1 Initializing CPU#0 Detected 399.322 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 796.26 BogoMIPS Memory: 255276k/262144k available (1254k kernel code, 6484k reserved, 434k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 03 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 ACPI: APM is already active, exiting rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE6000000) Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 169493kB/56497kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV3064D, ATA DISK drive hdc: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: HP Model: HP35480A Rev: T503 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:A:4): 5.000MB/s transfers (5.000MHz, offset 8) st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 192k freed Adding Swap: 205816k swap-space (priority -1) EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:01) ... reiserfs: replayed 23 transactions in 9 seconds Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:03) ... reiserfs: replayed 23 transactions in 4 seconds Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400, 00:60:08:50:b3:45, IRQ 10 product code 4b4b rev 00.0 date 08-12-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: first available media type: MII nmap uses obsolete (PF_INET,SOCK_PACKET) Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00002f8f ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15de000 esp: c15dffc4 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 8, stackpage=c15df000) Stack: c15de000 c0244877 c15de23b 0008e000 00000000 c0131e3e 00000001 c01320a5 00010f00 c15f7fb0 c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00004216 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15e0000 esp: c15e1fc8 ds: 0018 es: 0018 ss: 0018 Process bdflush (pid: 7, stackpage=c15e1000) Stack: c15e0000 c024486e c15e023a 0008e000 00000000 c0131f95 00000000 00010f00 c15f7fbc c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00008373 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: cc21e000 esp: cc21fea0 ds: 0018 es: 0018 ss: 0018 Process rpc.nfsd (pid: 450, stackpage=cc21f000) Stack: c69a7da0 00001000 00000001 00000000 00000000 c0131e22 00000000 c0130014 00000001 c0130c9d 00000301 00001000 cb9bb7e0 003b7000 00000000 c69a7da0 00001000 c01311e0 cb9bb7e0 c117c29c 00000000 00001000 00001000 c117c29c Call Trace: [] [] [] [] [] [] [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="DMESG4" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="DMESG4" Linux version 2.4.7 (root@eiche) (gcc version 2.95.2 19991024 (release)) #4 Tue Oct 2 16:55:42 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=new ro root=801 vga=0x0301 nmi_watchdog=1 Initializing CPU#0 Detected 399.322 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 796.26 BogoMIPS Memory: 255276k/262144k available (1254k kernel code, 6484k reserved, 434k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 03 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 ACPI: APM is already active, exiting rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE6000000) Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 169493kB/56497kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV3064D, ATA DISK drive hdc: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: HP Model: HP35480A Rev: T503 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:A:4): 5.000MB/s transfers (5.000MHz, offset 8) st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 192k freed Adding Swap: 205816k swap-space (priority -1) EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:01) ... reiserfs: replayed 23 transactions in 9 seconds Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:03) ... reiserfs: replayed 23 transactions in 4 seconds Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400, 00:60:08:50:b3:45, IRQ 10 product code 4b4b rev 00.0 date 08-12-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: first available media type: MII nmap uses obsolete (PF_INET,SOCK_PACKET) Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00002f8f ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15de000 esp: c15dffc4 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 8, stackpage=c15df000) Stack: c15de000 c0244877 c15de23b 0008e000 00000000 c0131e3e 00000001 c01320a5 00010f00 c15f7fb0 c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00004216 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15e0000 esp: c15e1fc8 ds: 0018 es: 0018 ss: 0018 Process bdflush (pid: 7, stackpage=c15e1000) Stack: c15e0000 c024486e c15e023a 0008e000 00000000 c0131f95 00000000 00010f00 c15f7fbc c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00008373 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: cc21e000 esp: cc21fea0 ds: 0018 es: 0018 ss: 0018 Process rpc.nfsd (pid: 450, stackpage=cc21f000) Stack: c69a7da0 00001000 00000001 00000000 00000000 c0131e22 00000000 c0130014 00000001 c0130c9d 00000301 00001000 cb9bb7e0 003b7000 00000000 c69a7da0 00001000 c01311e0 cb9bb7e0 c117c29c 00000000 00001000 00001000 c117c29c Call Trace: [] [] [] [] [] [] [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c8dcdef4 esp: c8dcded8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 505, stackpage=c8dcd000) Stack: cb6753a0 cb6753e8 000106e7 cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 0000fda0 40092d30 00000000 c8dcc000 00000004 c0110034 bffff88c cc7f5009 ced60c7c c8dcc000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="DMESG5" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="DMESG5" Linux version 2.4.7 (root@eiche) (gcc version 2.95.2 19991024 (release)) #4 Tue Oct 2 16:55:42 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=new ro root=801 vga=0x0301 nmi_watchdog=1 Initializing CPU#0 Detected 399.322 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 796.26 BogoMIPS Memory: 255276k/262144k available (1254k kernel code, 6484k reserved, 434k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 03 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 ACPI: APM is already active, exiting rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE6000000) Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 169493kB/56497kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV3064D, ATA DISK drive hdc: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: HP Model: HP35480A Rev: T503 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:A:4): 5.000MB/s transfers (5.000MHz, offset 8) st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 192k freed Adding Swap: 205816k swap-space (priority -1) EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:01) ... reiserfs: replayed 23 transactions in 9 seconds Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:03) ... reiserfs: replayed 23 transactions in 4 seconds Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400, 00:60:08:50:b3:45, IRQ 10 product code 4b4b rev 00.0 date 08-12-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: first available media type: MII nmap uses obsolete (PF_INET,SOCK_PACKET) Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00002f8f ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15de000 esp: c15dffc4 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 8, stackpage=c15df000) Stack: c15de000 c0244877 c15de23b 0008e000 00000000 c0131e3e 00000001 c01320a5 00010f00 c15f7fb0 c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00004216 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: c15e0000 esp: c15e1fc8 ds: 0018 es: 0018 ss: 0018 Process bdflush (pid: 7, stackpage=c15e1000) Stack: c15e0000 c024486e c15e023a 0008e000 00000000 c0131f95 00000000 00010f00 c15f7fbc c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c0131d76 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010206 eax: 00000000 ebx: 00008373 ecx: 00000000 edx: 00000002 esi: 00000000 edi: 00000000 ebp: cc21e000 esp: cc21fea0 ds: 0018 es: 0018 ss: 0018 Process rpc.nfsd (pid: 450, stackpage=cc21f000) Stack: c69a7da0 00001000 00000001 00000000 00000000 c0131e22 00000000 c0130014 00000001 c0130c9d 00000301 00001000 cb9bb7e0 003b7000 00000000 c69a7da0 00001000 c01311e0 cb9bb7e0 c117c29c 00000000 00001000 00001000 c117c29c Call Trace: [] [] [] [] [] [] [] [] [] Code: 8b 70 20 8b 50 18 f6 c2 02 75 0f 51 e8 09 e3 ff ff 83 c4 04 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c8dcdef4 esp: c8dcded8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 505, stackpage=c8dcd000) Stack: cb6753a0 cb6753e8 000106e7 cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 0000fda0 40092d30 00000000 c8dcc000 00000004 c0110034 bffff88c cc7f5009 ced60c7c c8dcc000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c7059ef4 esp: c7059ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 511, stackpage=c7059000) Stack: cb6753a0 cb6753e8 000106f1 cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 00001ca0 40092d30 00000000 c7058000 00000004 c0110034 bffff88c cc7f5009 ced60d1c c7058000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c7059ef4 esp: c7059ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 512, stackpage=c7059000) Stack: cb6753a0 cb6753e8 000106ed cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 000011e0 40092d30 00000000 c7058000 00000004 c0110034 bffff88c cc7f5009 ced60d1c c7058000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c7059ef4 esp: c7059ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 513, stackpage=c7059000) Stack: cb6753a0 cb6753e8 000106f3 cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 00001ba0 40092d30 00000000 c7058000 00000004 c0110034 bffff88c cc7f5009 ced60d1c c7058000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c7059ef4 esp: c7059ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 514, stackpage=c7059000) Stack: cb6753a0 cb6753e8 000106f3 cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 00001a60 40092d30 00000000 c7058000 00000004 c0110034 bffff88c cc7f5009 ced60d1c c7058000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 Unable to handle kernel paging request at virtual address fffffffc printing eip: c0110d93 *pde = 00001063 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010017 eax: cb6753e8 ebx: 00000000 ecx: 00000001 edx: cb6753ec esi: cb6753e8 edi: fffffff8 ebp: c7059ef4 esp: c7059ed8 ds: 0018 es: 0018 ss: 0018 Process sync (pid: 515, stackpage=c7059000) Stack: cb6753a0 cb6753e8 000106ed cb6753ec 00000001 00000286 00000003 00000000 c012f241 00000000 00000000 00000000 bffff8bc 00000000 000018a0 40092d30 00000000 c7058000 00000004 c0110034 bffff88c cc7f5009 ced60d1c c7058000 Call Trace: [] [] [] [] [] [] [] [] Code: 8b 4f 04 8b 1b 8b 01 85 45 fc 74 51 31 c0 9c 5e fa c7 01 00 --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="NULLPOINTER" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="NULLPOINTER" Linux version 2.4.7 (root@eiche) (gcc version 2.95.2 19991024 (release)) #4 Tue Oct 2 16:55:42 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=new ro root=801 vga=0x0301 nmi_watchdog=1 Initializing CPU#0 Detected 399.323 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 796.26 BogoMIPS Memory: 255276k/262144k available (1254k kernel code, 6484k reserved, 434k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 03 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 ACPI: APM is already active, exiting rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE6000000) Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 169493kB/56497kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV3064D, ATA DISK drive hdc: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: HP Model: HP35480A Rev: T503 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:A:4): 5.000MB/s transfers (5.000MHz, offset 8) st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 192k freed Adding Swap: 205816k swap-space (priority -1) EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.5, 30 Jul 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400, 00:60:08:50:b3:45, IRQ 10 product code 4b4b rev 00.0 date 08-12-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: first available media type: MII i2c-core.o: i2c core module piix4.o version 2.5.5 (20010115) i2c-core.o: adapter SMBus PIIX4 adapter at 5000 registered as adapter 0. i2c-piix4.o: PIIX4 bus detected and initialized i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-dev.o: Registered 'SMBus PIIX4 adapter at 5000' as minor 0 i2c-isa.o version 2.5.5 (20010115) i2c-dev.o: Registered 'ISA main adapter' as minor 1 i2c-core.o: adapter ISA main adapter registered as adapter 1. i2c-isa.o: ISA bus access for i2c modules initialized. i2c-core.o: I2C adapter 40000: I2C level transfers not supported i2c-core.o: I2C adapter 50000: I2C level transfers not supported Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: c012f5e6 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[] EFLAGS: 00010286 eax: cce1ff00 ebx: 00000003 ecx: cd58b4c0 edx: 00000000 esi: cd58b4c0 edi: 00000000 ebp: c15de000 esp: c15dffa4 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 8, stackpage=c15df000) Stack: 00000003 c01300d5 cd58b4c0 00000000 00003607 00000000 c0131d87 cd58b4c0 c15de000 c0244877 c15de23b 0008e000 cd58b4c0 c0131e3e 00000001 c01320a5 00010f00 c15f7fb0 c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] [] [] Code: 89 42 24 8b 44 24 0c c1 e0 02 bb 0c 6c 2e c0 89 c2 39 0c 1a Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: c012f5e6 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[] EFLAGS: 00010286 eax: caf7ef00 ebx: 00000003 ecx: cd58b4c0 edx: 00000000 esi: cd58b4c0 edi: 00000000 ebp: c15e0000 esp: c15e1fa8 ds: 0018 es: 0018 ss: 0018 Process bdflush (pid: 7, stackpage=c15e1000) Stack: 00000003 c01300d5 cd58b4c0 00000000 0000422b 00000000 c0131d87 cd58b4c0 c15e0000 c024486e c15e023a 0008e000 cd58b4c0 c0131f95 00000000 00010f00 c15f7fbc c02b9170 c0105454 c02b9170 00000078 c02a9fd4 Call Trace: [] [] [] [] Code: 89 42 24 8b 44 24 0c c1 e0 02 bb 0c 6c 2e c0 89 c2 39 0c 1a Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: c012f5e6 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[] EFLAGS: 00010282 eax: cc574e40 ebx: 00000003 ecx: cd58b4c0 edx: 00000000 esi: cd58b4c0 edi: 00000000 ebp: cf532000 esp: cf533e80 ds: 0018 es: 0018 ss: 0018 Process rpc.nfsd (pid: 225, stackpage=cf533000) Stack: 00000003 c01300d5 cd58b4c0 00000000 000084ae 00000000 c0131d87 cd58b4c0 cc574e40 00001000 00000001 00000000 cd58b4c0 c0131e22 00000000 c0130014 00000001 c0130c9d 00000301 00001000 c3205260 00013000 00000000 cc574e40 Call Trace: [] [] [] [] [] [] [] [] [] [] [] Code: 89 42 24 8b 44 24 0c c1 e0 02 bb 0c 6c 2e c0 89 c2 39 0c 1a --------------738DD08108C0D11FE493C9FC Content-Type: text/plain; charset=us-ascii; name="PSAUX_DMESG2" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="PSAUX_DMESG2" USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.2 0.0 344 192 ? S Oct06 0:04 init [2] root 2 0.0 0.0 0 0 ? SW Oct06 0:00 [keventd] root 3 30.4 0.0 0 0 ? SW Oct06 8:47 [kapm-idled] root 4 0.0 0.0 0 0 ? SWN Oct06 0:00 [ksoftirqd_CPU0] root 5 0.1 0.0 0 0 ? SW Oct06 0:02 [kswapd] root 6 0.0 0.0 0 0 ? SW Oct06 0:00 [kreclaimd] root 7 0.1 0.0 0 0 ? Z Oct06 0:01 [bdflush ] root 8 0.0 0.0 0 0 ? Z Oct06 0:01 [kupdated ] root 9 0.0 0.0 0 0 ? SW Oct06 0:00 [scsi_eh_0] root 10 0.0 0.0 0 0 ? SW Oct06 0:00 [kjournald] root 37 0.0 0.0 0 0 ? SW Oct06 0:00 [kjournald] root 38 0.0 0.0 0 0 ? SW Oct06 0:00 [kreiserfsd] root 39 0.0 0.0 0 0 ? SW Oct06 0:00 [kjournald] bin 150 0.0 0.2 1272 528 ? S Oct06 0:00 /sbin/portmap root 168 0.0 0.2 1308 656 ? S Oct06 0:00 /usr/sbin/syslogd root 172 0.0 0.2 1324 584 ? S Oct06 0:00 /usr/sbin/klogd -c 1 lp 261 0.0 0.3 1788 828 ? S Oct06 0:00 lpd Waiting root 286 0.0 0.3 2320 996 ? S Oct06 0:00 /usr/sbin/sshd root 307 0.0 0.5 2424 1472 vc/1 S Oct06 0:00 -bash root 308 0.0 0.5 2424 1472 vc/2 S Oct06 0:01 -bash root 309 0.0 0.5 2424 1460 vc/3 S Oct06 0:00 -bash root 310 0.0 0.2 1232 516 vc/4 S Oct06 0:00 /sbin/agetty vc/4 57600 root 311 0.0 0.2 1232 516 vc/5 S Oct06 0:00 /sbin/agetty vc/5 57600 root 312 0.0 0.2 1232 516 vc/6 S Oct06 0:00 /sbin/agetty vc/6 57600 root 407 0.0 0.5 2408 1284 ? S Oct06 0:00 /usr/sbin/sshd root 408 0.0 0.5 2440 1480 pts/0 S Oct06 0:00 -bash root 416 0.0 0.5 2408 1284 ? S Oct06 0:00 /usr/sbin/sshd root 417 0.0 0.5 2440 1484 pts/1 S Oct06 0:00 -bash root 447 0.0 0.3 1760 860 ? S Oct06 0:00 /usr/sbin/rpc.mountd root 450 37.0 0.4 2116 1220 ? S< Oct06 1:11 /usr/sbin/rpc.nfsd root 454 2.5 0.5 2212 1396 vc/1 S Oct06 0:03 top root 457 0.0 0.4 2992 1244 vc/2 R 00:00 0:00 ps xau --------------738DD08108C0D11FE493C9FC--