public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bernhard Busch <bbusch@biochem.mpg.de>
To: linux-kernel@vger.kernel.org
Subject: Poor Performance for ethernet bonding
Date: Fri, 24 Aug 2001 15:37:06 +0200	[thread overview]
Message-ID: <3B865882.24D57941@biochem.mpg.de> (raw)

Hi


I have tried to use ethernet  network interfaces bonding to increase
peformance.

Bonding is working fine, but the performance is rather poor.
FTP between 2 machines ( kernel 2.4.4 and 4 port DLink 100Mbit ethernet
card)
results in a transfer rate of 3MB/s).

Any Hints?


here is my setup for the channel bonding

insmod bonding
insmod tulip
ifconfig bond0 192.168.100.2 netmask 255.255.255.0 broadcast
192.168.100.255
ifconfig bond0 down
./ifenslave  -v bond0 eth2 eth3 eth4 eth5
ifconfig bond0 up
route add -host 192.168.100.1 dev bond0


Many thanks for every help

Bernhard

--
Dr. Bernhard Busch
Max-Planck-Institut für Biochemie
Am Klopferspitz 18a
D-82152 Martinsried
Tel: +48(89)8578-2582
Fax: +49(89)8578-2479
Email bbusch@biochem.mpg.de




             reply	other threads:[~2001-08-24 13:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-08-24 13:37 Bernhard Busch [this message]
2001-08-24 14:12 ` Poor Performance for ethernet bonding Sergey Ostrovsky
2001-08-24 14:33 ` Martin Josefsson
2001-08-24 15:16   ` Ben Greear
     [not found] <3B865882.24D57941@biochem.mpg.de.suse.lists.linux.kernel>
2001-08-24 13:44 ` Andi Kleen
2001-08-24 15:19   ` Ben Greear
2001-08-24 15:22     ` Andi Kleen
2001-08-24 15:45       ` Ben Greear
2001-08-24 16:04         ` Andi Kleen
2001-08-27  7:40           ` Henning P. Schmiedehausen
2001-08-24 18:17     ` Thomas Davis
2001-08-24 20:59       ` Ben Greear
  -- strict thread matches above, loose matches on Subject: below --
2001-08-25  7:04 Willy Tarreau
2001-08-25 18:23 ` Ben Greear
2001-08-26  7:59   ` willy tarreau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3B865882.24D57941@biochem.mpg.de \
    --to=bbusch@biochem.mpg.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox