From: Jussi Laako <jlaako@pp.htv.fi>
To: linux-kernel@vger.kernel.org
Subject: AMD 760 (761?) AGP
Date: Thu, 06 Sep 2001 22:49:08 +0300 [thread overview]
Message-ID: <3B97D334.E27BDA25@pp.htv.fi> (raw)
Hello,
What is current status of support for AMD 760 (or is this 761?) AGP bridge?
Current agpgart doesn't seem to work when forced to load.
Here's output from lspci -vvv and /proc/pci, dunno about lspci, but both are
AGP 4x. Also some id information could be added for the ATI. It's ATI Radeon
VE DDR (QY?, 186 Mhz).
00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700e (rev
13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f7800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=15 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 700f
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7000000-e7dfffff
Prefetchable memory behind bridge: e7f00000-f77fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5159
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 013a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at e7000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at e7fe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bus 0, device 0, function 0:
Host bridge: Advanced Micro Devices [AMD] AMD-760 [Irongate] System
Controller (rev 19).
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
Prefetchable 32 bit memory at 0xf7800000 [0xf7800fff].
I/O at 0xe000 [0xe003].
Bus 0, device 1, function 0:
PCI bridge: Advanced Micro Devices [AMD] AMD-760 [Irongate] AGP Bridge
(rev 0).
Master Capable. No bursts. Min Gnt=8.
Bus 1, device 5, function 0:
VGA compatible controller: PCI device 1002:5159 (ATI Technologies Inc)
(rev 0).
IRQ 9.
Master Capable. Latency=64. Min Gnt=8.
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xe7000000 [0xe700ffff].
--
PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B 39DD A4DE 63EB C216 1E4B
Available at PGP keyservers
next reply other threads:[~2001-09-06 19:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-06 19:49 Jussi Laako [this message]
2001-09-08 2:20 ` AMD 760 (761?) AGP Steven Spence
2001-09-08 16:25 ` Jussi Laako
2001-09-09 21:54 ` Jaakko Hyvätti
2001-09-09 11:05 ` Guus Sliepen
2001-09-08 8:55 ` Jesper Juhl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B97D334.E27BDA25@pp.htv.fi \
--to=jlaako@pp.htv.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox