Re: AIC + RAID1 error? (was: Re: aic7xxx errors)

[SPATZ1@t-online.de (Frank Schneider)]

"Justin T. Gibbs" schrieb:
> 
> >What about a kind of timer ?
> 
> The functions are run serially.  If I'm to wait, I must block
> or risk having the machine powered off prior to completing my shutdown.
> 
> A coworker of mine playing with the MD code reminded me that
> he had to change the priority of the MD notifier to make it work.
> I believe that this is the correct fix as there are other SCSI
> drivers that have shutdown hooks.
> 
> All HBA drivers currently use 0 (or the lowest) as their priority.
> MD (line 3475 of drivers/md/md.c) uses 0 too.  Change it to INT_MAX
> and MD will always get shutdown prior to any child devices it might
> use.

One question is still open on this case:
Why does the Oops only occur if the "aic7xxx=verbose" is set ?

The above explanation is correct (AFAIK), but the kernel-oops should
then happen on *every* reboot, not only if this verbose-parameter is
set...or does the driver try to shutdown the drives and then write to
the log "AIC7xxx shutdown successfull"...?...:-))

Solong...
Frank.

--
Frank Schneider, <SPATZ1@T-ONLINE.DE>.                           
Microsoft isn't the answer.
Microsoft is the question, and the answer is NO.
... -.-