From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 6 Oct 2001 17:54:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 6 Oct 2001 17:53:56 -0400 Received: from chmls05.mediaone.net ([24.147.1.143]:3839 "EHLO chmls05.mediaone.net") by vger.kernel.org with ESMTP id ; Sat, 6 Oct 2001 17:53:51 -0400 Message-ID: <3BBF7C68.1090101@langhorst.com> Date: Sat, 06 Oct 2001 17:49:28 -0400 From: Brad Langhorst User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.4+) Gecko/20010916 X-Accept-Language: en-us MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: dual pdc20268(ultra100tx2) hangs kernel 2.4.9,10 on boot Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I can boot with no trouble with only one of these cards in the system. If I insert the other card (no drives connected) the whole system hangs leaving two white blocks on the screen. This hang appears to occur as soon as the kernel starts detecting hard disk controllers. It is running on a PCChips M810LR motherboard with an SIS730 on board ide controller. AMD Duron 750 192M 133MHz SDRAM The only identifying mark on the motherboard is on the heatsink of the big IC. It says TBird AMD K-7. The system was very stable with 3ware dual channel ata raid controller (200 day uptimes) so I don't think it is a hardware problem. I've tried both cards - each works alone Both cards have BIOS 2.10 build 23. I've tried compiling the kernel both with and without CONFIG_PDC202XX_BURST set but this does not appear to have any effect. The motherboard has and AMI bios dated 9/14/01 Any suggestions are much appreciated