From: Igor Bukanov <boukanov@fi.uib.no>
To: John J Tobin <ogre@sirinet.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: IDE DVD problem under 2.4: status=0x51 { DriveReady SeekComplete Error } (fwd)
Date: Mon, 15 Oct 2001 21:19:03 +0200 [thread overview]
Message-ID: <3BCB36A7.7020909@fi.uib.no> (raw)
In-Reply-To: <Pine.OSF.3.96.1011015132315.30364A-100000@asfys3.fi.uib.no>
John J Tobin wrote:
> On Sun, 2001-10-14 at 20:32, Igor Bukanov wrote:
>
>>I tried to setup my Dell Inspiron 7500 notebook (Celeron 466/512MB) with
>>TORiSAN DVD-ROM DRD-U62 (RPC-2 drive :-( ) to watch DVD and found the
>>following when using decss to read the encrypted vob files (other ways
>>to access the file eventually produce the same error) under 2.4.12
>>kernel, RedHat Linux 7.1. After I authenticated the drive and got a
>>title key for some file, css-cat always fails on the first 2-3 attempts
>>to read the file due to input-output error with kernel message:
>>
>>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
>>hdc: command error: error=0x50
>>end_request: I/O error, dev 16:00 (hdc), sector 563008
>>
>>
> Under the IDE/ATAPI configuration stuff in the kernel configuration
> select the option "Use multi-mode by default." That may solve your
> problem.
I already have that option on:
CONFIG_IDEDISK_MULTI_MODE=y
Should I try with this option disabled???
Here are uncommented line from my .config IDE section:
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_PIIX_TUNING=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
Regards, Igor
parent reply other threads:[~2001-10-15 19:13 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <Pine.OSF.3.96.1011015132315.30364A-100000@asfys3.fi.uib.no>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BCB36A7.7020909@fi.uib.no \
--to=boukanov@fi.uib.no \
--cc=linux-kernel@vger.kernel.org \
--cc=ogre@sirinet.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox