Linux version 2.2.19 (root@shire) (gcc version 2.95.3 20010315 (release)) #3 Mon Oct 15 22:52:52 CEST 2001
USER-provided physical RAM map:
 USER: 000a0000 @ 00000000 (usable)
 USER: 05f00000 @ 00100000 (usable)
Detected 233868 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 466.94 BogoMIPS
Memory: 95592k/98304k available (1064k kernel code, 412k reserved, 1192k data, 44k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb730
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5 
parport0: PC-style at 0x378 [SPP,PS2]
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG VG33402A (3.40GB), ATA DISK drive
hdb: Maxtor 72004 AP, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-6602B, ATAPI CDROM drive
hdd: WDC AC2340H, ATA DISK drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: SAMSUNG VG33402A (3.40GB), 3244MB w/112kB Cache, CHS=6591/16/63, UDMA
hdb: Maxtor 72004 AP, 1916MB w/128kB Cache, CHS=3893/16/63, DMA
hdd: WDC AC2340H, 325MB w/128kB Cache, CHS=1010/12/55
hdc: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
PPP BSD Compression module registered
PPP Deflate Compression module registered
Partition check:
 hda: hda1 hda2 hda3
 hdb: hdb1
 hdd: hdd1 hdd2
usb.c: registered new driver hub
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
Loading Lucent Modem Controller driver version 6.00
VFS: Disk change detected on device ide1(22,0)
registered device ppp0
Detected Parameters Irq=10 BaseAddress=0x6600 ComAddress=0x6500
Lucent Modem Interface driver version 6.00
ttyLT00 at 0x6600 (irq = 10) is a Lucent Modem