From: Jeff Garzik <jgarzik@mandrakesoft.com>
To: Sean Middleditch <elanthis@awesomeplay.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Via Onboard Audio - Round #2
Date: Sun, 04 Nov 2001 00:03:28 -0500 [thread overview]
Message-ID: <3BE4CC20.5FFEC4B5@mandrakesoft.com> (raw)
In-Reply-To: <1004849558.457.15.camel@stargrazer>
Sean Middleditch wrote:
>
> Hi all!
>
> OK, I seemed to have made a realization:
>
> When the via82cxxx_audio driver loads (this is in 2.4.12, Debian
> version, which I think is Linus tree with a couple patches), I get these
> errors (which I also think I had on the RH kernels, tho I can't exactly
> check that anymoe, since RH is gone):
>
> IEQ routing conflict for 00:07.5, have irq 5, want irq 11
> PCI: Sharing IRQ 11 with 00:0a.0
> PCI: Sharing IRQ 11 with 00.0b.0
> via82cxxx: timeout while reading AC97 codec (0xAA0000)
> via82cxxx: timeout while reading AC97 codec (0xAA0000)
> via82cxxx: Codec rate locked at 48Khz
> via82cxxx: timeout while reading AC97 codec (0x800000)
> ac97_codec: AC97 codec, id: 0x4144:0x5361 (Unknown)
> via82cxxx: board #1 at 0x1000, IRQ 5
>
> (note, those were hand typed, I'm writing this up on my workstation not
> the laptop, so no cut and paste, and I'm too lazy to deal with floppies
> at the moment).
>
> In /proc/pci, the audio board is at IRQ 5, device 9 on bus 9.
> lspci says it is device 00:07.5 (as does the above notice).
>
> pcitweak -l reports, for the device:
> PCI: 00:07.5: chip 1106,3058 card 0e11,0097 rev 50 class 04,01,00 hdr 00
>
> In any event, I'm thinking perhaps there is an IRQ conflict happening
> here? I looked in the BIOS, and the BIOS gives me *no* options relating
> to IRQ's (All I see are a couple lpt options, boot order, and
> suspend/resume disabling). I tried modprobe via82cxx_audio irq=5 but
> that gave me errors about the irq option not being valid. How can I
> force the IEQ to 5, or 11, or whatever other IRQ I want?
You cannot, through driver options.
The IRQ routing conflict is definitely the problem. You can try booting
with "PNP OS: No" and maybe other irq options are hidden in your BIOS
setup under an advanced menu.
--
Jeff Garzik | Only so many songs can be sung
Building 1024 | with two lips, two lungs, and one tongue.
MandrakeSoft | - nomeansno
next prev parent reply other threads:[~2001-11-04 5:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-04 4:52 Via Onboard Audio - Round #2 Sean Middleditch
2001-11-04 5:03 ` Jeff Garzik [this message]
2001-11-04 5:30 ` Sean Middleditch
2001-11-04 13:45 ` Jeff Garzik
2001-11-04 13:48 ` Jeff Garzik
2001-11-04 16:09 ` Sean Middleditch
2001-11-05 3:34 ` Sean Middleditch
2001-11-04 13:20 ` Anton Altaparmakov
2001-11-04 13:44 ` Jeff Garzik
2001-11-04 13:54 ` Anton Altaparmakov
2001-11-04 13:56 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BE4CC20.5FFEC4B5@mandrakesoft.com \
--to=jgarzik@mandrakesoft.com \
--cc=elanthis@awesomeplay.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox