My 3c980 is misdetected

My 3c980 is misdetected

[Matt]

More NIC-related queries,

Under the 2.4.13 kernel, the 3c59x.o driver misdetects my 3c980 as a 3c982
(the dual port version of what I assume is the same card):

3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:09.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xdc00. Vers LK1.1.16

Here is the output of lspci -v:

00:09.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78)
        Subsystem: 3Com Corporation: Unknown device 1000
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at dc00 [size=128]
        Memory at db000000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2

It all seems to work fine, but I was wondering if this might cause a
hiccup anywhere? 2.2.19 identified my card correctly, and I have some
earlier 3c980 models in another box still running 2.2.19, which get
detected correctly too:

00:0a.0 Class 0200: 10b7:9800
        Subsystem: 10b7:9800
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at d880
        Memory at efffaf80 (32-bit, non-prefetchable)
        Expansion ROM at effc0000 [disabled]
        Capabilities: [dc] Power Management version 1

Cheers

Matt
-- 
"Phase plasma rifle in a forty-watt range?"
"Only what you see on the shelves, buddy."

Re: My 3c980 is misdetected

[Andrew Morton]

Matt wrote:
> 
> More NIC-related queries,
> 
> Under the 2.4.13 kernel, the 3c59x.o driver misdetects my 3c980 as a 3c982
> (the dual port version of what I assume is the same card):
> 
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:09.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xdc00. Vers LK1.1.16
> 
> Here is the output of lspci -v:
> 
> 00:09.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78)
>         Subsystem: 3Com Corporation: Unknown device 1000
>         Flags: bus master, medium devsel, latency 32, IRQ 10
>         I/O ports at dc00 [size=128]
>         Memory at db000000 (32-bit, non-prefetchable) [size=128]
>         Expansion ROM at <unassigned> [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2
> 
> It all seems to work fine, but I was wondering if this might cause a
> hiccup anywhere? 2.2.19 identified my card correctly, and I have some
> earlier 3c980 models in another box still running 2.2.19, which get
> detected correctly too:
> 

No, that's OK - it's just the identification string which is
incorrect.  I was "updating" the ID strings from the latest Becker
driver and one of us got it wrong...