* disaster with 2.4.14+preempt
@ 2001-11-07 4:11 J Sloan
2001-11-07 5:07 ` Robert Love
0 siblings, 1 reply; 20+ messages in thread
From: J Sloan @ 2001-11-07 4:11 UTC (permalink / raw)
To: Robert Love; +Cc: linux-kernel
HI all,
I upgraded my test box (Compaq 6500,
4 CPUs, 1.2 GB RAM) to Red Hat 7.2,
which went very nicely. It seems stable
and tux is very very fast.
I have been pleased with 2.4.14 on several
desktop systems, so my next step was to
build 2.4.14 on the Compaq - I decided to
apply the 2.4.14-1-preempt-patch as well.
I built/booted the new kernel, and started
my usual dbench run to check it out -
Ironically, I then witnessed a disastrous
file corruption, the likes of which I'd never
seen in years of using ext2 - in short, the
old lockup that was previously fixed is back,
nastier than ever - and this time it caused
the box to scribble on /usr/lib before dying.
A few seconds after starting "dbench 16",
the server locked hard. (When it came back
up, many programs were not functional, with
claims of invalid or corrupt libraries)
I was however able to hand copy the oops
from the console and run through ksymoops
after bringing the box backup again:
Invalid operand: 0000
CPU: 2
EIP: 0010:[<c01300ee>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00010086 ebx: ea416dap ecx: c0269f20 edx: 00000004
esi: c1a9e1c0 edi: f7bb3000 ebp: 00000000 esp: c2213eb8
ds: 0018 es: 0018 ss: 0018
Process swapper (pid:0, stackpage=c2213000)
Stack: c0238c3e 0000004a 00000082 00000001 00000003 00000046 f628fbc0
ea416da0
00000082 f7bb3000 00000000 c0135ab6 c019ed8a c0423f00 00000000
00000001
00000000 f7b916dc c019edef ea416da0 00000000 00000012 00000000
00000040
Call Trace: [<c0135ab6>] [<c019ed8a>] [<c019edef>] [<c0108a3e>]
[<c0108ccb>]
[<c0105240>] [<c0105240>] [<c0105240>] [<c010526c>] [<c01052f2>]
[<c011611f>]
Code: 0f 0b 58 5a 8b 7e 08 85 ff 74 10 6a 4c 68 3e 8c 23 c0 e8 bb
>>EIP; c01300ee <__free_pages_ok+1e/2e0> <=====
Trace; c0135ab6 <bounce_end_io_write+46/f0>
Trace; c019ed8a <do_ida_intr+1ba/2c0>
Trace; c019edef <do_ida_intr+21f/2c0>
Trace; c0108a3e <handle_IRQ_event+5e/90>
Trace; c0108ccb <do_IRQ+bb/140>
Trace; c0105240 <default_idle+0/40>
Trace; c0105240 <default_idle+0/40>
Trace; c0105240 <default_idle+0/40>
Trace; c010526c <default_idle+2c/40>
Trace; c01052f2 <cpu_idle+52/70>
Trace; c011611f <printk+15f/1a0>
Code; c01300ee <__free_pages_ok+1e/2e0>
00000000 <_EIP>:
Code; c01300ee <__free_pages_ok+1e/2e0> <=====
0: 0f 0b ud2a <=====
Code; c01300f0 <__free_pages_ok+20/2e0>
2: 58 pop %eax
Code; c01300f1 <__free_pages_ok+21/2e0>
3: 5a pop %edx
Code; c01300f2 <__free_pages_ok+22/2e0>
4: 8b 7e 08 mov 0x8(%esi),%edi
Code; c01300f5 <__free_pages_ok+25/2e0>
7: 85 ff test %edi,%edi
Code; c01300f7 <__free_pages_ok+27/2e0>
9: 74 10 je 1b <_EIP+0x1b> c0130109
<__free_pages_ok+39/2e0>
Code; c01300f9 <__free_pages_ok+29/2e0>
b: 6a 4c push $0x4c
Code; c01300fb <__free_pages_ok+2b/2e0>
d: 68 3e 8c 23 c0 push $0xc0238c3e
Code; c0130100 <__free_pages_ok+30/2e0>
12: e8 bb 00 00 00 call d2 <_EIP+0xd2> c01301c0
<__free_pages_ok+f0/2e0>
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: disaster with 2.4.14+preempt 2001-11-07 4:11 disaster with 2.4.14+preempt J Sloan @ 2001-11-07 5:07 ` Robert Love 2001-11-07 6:52 ` J Sloan 2001-11-07 21:17 ` J Sloan 0 siblings, 2 replies; 20+ messages in thread From: Robert Love @ 2001-11-07 5:07 UTC (permalink / raw) To: J Sloan; +Cc: linux-kernel On Tue, 2001-11-06 at 23:11, J Sloan wrote: > HI all, > > I upgraded my test box (Compaq 6500, > 4 CPUs, 1.2 GB RAM) to Red Hat 7.2, > which went very nicely. It seems stable > and tux is very very fast. > > I have been pleased with 2.4.14 on several > desktop systems, so my next step was to > build 2.4.14 on the Compaq - I decided to > apply the 2.4.14-1-preempt-patch as well. Well, I'm a caring guy so I went and tried to duplicate (in much fear for my data) your problem. I use RedHat 7.2, too. Compiled with gcc 2.96. I compiled 2.4.14+preempt+ext3. Booted, ran multiple dbench runs, booted X, compiled a new kernel. (Un)fortunately, I could not reproduce the problem (or any problem). So I compiled 2.4.14+preempt, this time using ext2 like you. I also enabled highmem and SMP, although I don't need those. Again I ran multiple dbench runs, went into X, and here I am ... the kernel is solid. So I am a tad baffled. This is a first post. Let's start the game... What was the last kernel you had no problems with when used with preempt? Is 2.4.14 running now? Without preempt? Fine? Can you attach your .config? > I built/booted the new kernel, and started > my usual dbench run to check it out - > > Ironically, I then witnessed a disastrous > file corruption, the likes of which I'd never > seen in years of using ext2 - in short, the > old lockup that was previously fixed is back, > nastier than ever - and this time it caused > the box to scribble on /usr/lib before dying. > > A few seconds after starting "dbench 16", > the server locked hard. (When it came back > up, many programs were not functional, with > claims of invalid or corrupt libraries) > > I was however able to hand copy the oops > from the console and run through ksymoops > after bringing the box backup again: > > Invalid operand: 0000 > CPU: 2 > EIP: 0010:[<c01300ee>] Not tainted > Using defaults from ksymoops -t elf32-i386 -a i386 > EFLAGS: 00010082 > eax: 00010086 ebx: ea416dap ecx: c0269f20 edx: 00000004 > esi: c1a9e1c0 edi: f7bb3000 ebp: 00000000 esp: c2213eb8 > ds: 0018 es: 0018 ss: 0018 > Process swapper (pid:0, stackpage=c2213000) > Stack: c0238c3e 0000004a 00000082 00000001 00000003 00000046 f628fbc0 > ea416da0 > 00000082 f7bb3000 00000000 c0135ab6 c019ed8a c0423f00 00000000 > 00000001 > 00000000 f7b916dc c019edef ea416da0 00000000 00000012 00000000 > 00000040 > Call Trace: [<c0135ab6>] [<c019ed8a>] [<c019edef>] [<c0108a3e>] > [<c0108ccb>] > [<c0105240>] [<c0105240>] [<c0105240>] [<c010526c>] [<c01052f2>] > [<c011611f>] > Code: 0f 0b 58 5a 8b 7e 08 85 ff 74 10 6a 4c 68 3e 8c 23 c0 e8 bb > > >>EIP; c01300ee <__free_pages_ok+1e/2e0> <===== > Trace; c0135ab6 <bounce_end_io_write+46/f0> > Trace; c019ed8a <do_ida_intr+1ba/2c0> > Trace; c019edef <do_ida_intr+21f/2c0> > Trace; c0108a3e <handle_IRQ_event+5e/90> > Trace; c0108ccb <do_IRQ+bb/140> > Trace; c0105240 <default_idle+0/40> > Trace; c0105240 <default_idle+0/40> > Trace; c0105240 <default_idle+0/40> > Trace; c010526c <default_idle+2c/40> > Trace; c01052f2 <cpu_idle+52/70> > Trace; c011611f <printk+15f/1a0> > Code; c01300ee <__free_pages_ok+1e/2e0> > 00000000 <_EIP>: > Code; c01300ee <__free_pages_ok+1e/2e0> <===== > 0: 0f 0b ud2a <===== > Code; c01300f0 <__free_pages_ok+20/2e0> > 2: 58 pop %eax > Code; c01300f1 <__free_pages_ok+21/2e0> > 3: 5a pop %edx > Code; c01300f2 <__free_pages_ok+22/2e0> > 4: 8b 7e 08 mov 0x8(%esi),%edi > Code; c01300f5 <__free_pages_ok+25/2e0> > 7: 85 ff test %edi,%edi > Code; c01300f7 <__free_pages_ok+27/2e0> > 9: 74 10 je 1b <_EIP+0x1b> c0130109 > <__free_pages_ok+39/2e0> > Code; c01300f9 <__free_pages_ok+29/2e0> > b: 6a 4c push $0x4c > Code; c01300fb <__free_pages_ok+2b/2e0> > d: 68 3e 8c 23 c0 push $0xc0238c3e > Code; c0130100 <__free_pages_ok+30/2e0> > 12: e8 bb 00 00 00 call d2 <_EIP+0xd2> c01301c0 > <__free_pages_ok+f0/2e0> > > <0>Kernel panic: Aiee, killing interrupt handler! > > In interrupt handler - not syncing Robert Love ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: disaster with 2.4.14+preempt 2001-11-07 5:07 ` Robert Love @ 2001-11-07 6:52 ` J Sloan 2001-11-07 21:17 ` J Sloan 1 sibling, 0 replies; 20+ messages in thread From: J Sloan @ 2001-11-07 6:52 UTC (permalink / raw) To: Robert Love; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 1786 bytes --] Robert Love wrote: > Well, I'm a caring guy so I went and tried to duplicate (in much fear > for my data) your problem. Thank you - > I compiled 2.4.14+preempt+ext3. Booted, ran multiple dbench runs, > booted X, compiled a new kernel. (Un)fortunately, I could not reproduce > the problem (or any problem). Maybe my hardware brings out the best - > So I compiled 2.4.14+preempt, this time using ext2 like you. I also > enabled highmem and SMP, although I don't need those. Again I ran > multiple dbench runs, went into X, and here I am ... the kernel is > solid. I am using ext3 as well - > What was the last kernel you had no problems with when used with > preempt? hmm, let me go back through our correspondence.... Looks like we documented 2.4.12-ac3 as being the point where you came up with the fix (Oct 20) Unfortunately I wiped the disks before installing 7.2, so the past is lost. I had been concentrating on seeing how fast tux is, and what I had to do to get the ext3 dbench results back into the same ballpark as with ext2 - 2.4.14 was the first self compiled kernel after installing 7.2 that I can definitely say I applied the preempt patch. I will try this on my low end box, compiled with all the high end options - it showed the problem last time... > Is 2.4.14 running now? Without preempt? Fine? Well when I get back to work tomorrow I will see what it takes to get the box back up - I may end up just doing a reinstall, since it's a test box and nothing important on it yet. I'll surely build a vanilla 2.4.14 and test. > Can you attach your .config? Sure, attached - > > Trace; c019ed8a <do_ida_intr+1ba/2c0> > > Trace; c019edef <do_ida_intr+21f/2c0> Perhaps these lines show that the compaq "smart controller" could be implicated? cu jjs [-- Attachment #2: .config --] [-- Type: text/plain, Size: 18931 bytes --] # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set CONFIG_M686=y # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set CONFIG_SMP=y CONFIG_PREEMPT=y # CONFIG_MULTIQUAD is not set CONFIG_HAVE_DEC_LOCK=y # # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=m CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_LVM=m # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NETLINK_DEV=m # CONFIG_NETFILTER is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_RTNETLINK=y CONFIG_NETLINK=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_ROUTE_LARGE_TABLES is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y CONFIG_PIIX_TUNING=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set CONFIG_SCSI_NCR53C8XX=y CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNLANCE is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set CONFIG_3C515=m # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=m # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set CONFIG_CS89x0=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_DE4X5=m # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=m # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set CONFIG_TLAN=m # CONFIG_VIA_RHINE is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # CONFIG_TR=y CONFIG_IBMTR=m CONFIG_IBMOL=m CONFIG_IBMLS=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_TMSISA=m CONFIG_ABYSS=m # CONFIG_MADGEMC is not set CONFIG_SMCTR=m # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_AGP_I810=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y # CONFIG_AGP_SWORKS is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_MGA is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_QUOTA=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set CONFIG_UDF_FS=m # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set CONFIG_ZISOFS_FS=m CONFIG_ZLIB_FS_INFLATE=m # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set # CONFIG_USB_OHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_RIO500 is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_BUGVERBOSE=y ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: disaster with 2.4.14+preempt 2001-11-07 5:07 ` Robert Love 2001-11-07 6:52 ` J Sloan @ 2001-11-07 21:17 ` J Sloan 2001-11-07 22:30 ` Robert Love 2001-11-08 3:48 ` preempt-patch cleared of blame J Sloan 1 sibling, 2 replies; 20+ messages in thread From: J Sloan @ 2001-11-07 21:17 UTC (permalink / raw) To: Robert Love; +Cc: Linux kernel Robert Love wrote: > So I compiled 2.4.14+preempt, this time using ext2 like you. I also > enabled highmem and SMP, although I don't need those. Again I ran > multiple dbench runs, went into X, and here I am ... the kernel is > solid. OK I have replaced enough of the libs so that rpm works again, and was able to do a verify to get the rest of the pieces in order. > What was the last kernel you had no problems with when used with > preempt? I was able to recover some stuff from old backups, including the kernels I last used under RH 7.1 - I see vmlinuz-2.4.12-ac6, and vmlinuz-2.4.13 Both have preempt patches, and highmen & smp support. I know they were stable under the test. I am pounding the old 2.4.13 kernel now (filesystems mounted as ext2) with dbench 16, 32, 64, and 128 and it is holding up fine. I will compile 2.4.14 without the preempt patch and repeat - Finally, I will repeat the 2.4.14+preempt test, and I predict the box will lock hard a few seconds after typing "dbench 16" Is there anything in particular you would like me to try? cu jjs ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: disaster with 2.4.14+preempt 2001-11-07 21:17 ` J Sloan @ 2001-11-07 22:30 ` Robert Love 2001-11-08 3:48 ` preempt-patch cleared of blame J Sloan 1 sibling, 0 replies; 20+ messages in thread From: Robert Love @ 2001-11-07 22:30 UTC (permalink / raw) To: J Sloan; +Cc: Linux kernel On Wed, 2001-11-07 at 16:17, J Sloan wrote: > Is there anything in particular you would > like me to try? Confirm 2.4.13+preempt doesn't cause the problem. If it doesn't, can you try recompiling with the newest 2.4.13 preempt-kernel patch. I forget from which version we removed the atomic operators, but I want to confirm this is not the problem. Confirm 2.4.14 doesn't cause the problem. (if possible) confirm 2.4.14+preempt does indeed cause the problem. Let me just spit out my thinking here: Is it preempt? Is it something in 2.4.14 annoying preempt? Is it the non-atomicity recently introduced? Robert Love ^ permalink raw reply [flat|nested] 20+ messages in thread
* preempt-patch cleared of blame 2001-11-07 21:17 ` J Sloan 2001-11-07 22:30 ` Robert Love @ 2001-11-08 3:48 ` J Sloan 2001-11-08 10:36 ` Jens Axboe 1 sibling, 1 reply; 20+ messages in thread From: J Sloan @ 2001-11-08 3:48 UTC (permalink / raw) To: J Sloan; +Cc: Robert Love, Linux kernel Hi All, I'd reported a disaster with 2.4.14+preempt, but I have just reproduced it with 2.4.14 vanilla - (to recap, "dbench 16" hangs the system hard, it doesn't even respond to pings, and must be power cycled) Again, since I am seeing the problem with 2.4.14 vanilla, the preempt patch is NOT at fault here - However I am concerned with this latest twist, as I want linux to be extremely stable, and this sort of thing is discouraging. I think there may be a problem with the compaq smart/2p raid drivers, since the "do_ida_intr" code keeps showing up in the oops, and I have not seen a problem with 2.4.14 on any other system. I am going to try and reproduce the oops elsewhere, and hopefuly I will not be able to - in any event, the oops follows: Compaq 6500 4XPPRO 200 1.2 GB RAM compaq "smart" raid controller ----------------------------------------------------------- ksymoops 2.4.1 on i686 2.4.14. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.4.14/ (default) -m /boot/System.map-2.4.14 (default) case login: Unable to handle kernel NULL pointer dereference at virtual address 00000000 *pde = 00000000 Oops: 0000 CPU: 3 EIP: 0010:[<00000000>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010082 eax: f1c29480 ebx: f1ec17e0 ecx: 00000001 edx: f0509540 esi: f7b93fc4 edi: f7bb7000 ebp: 00000001 esp: f569de80 ds: 0018 es: 0018 ss: 0018 Process dbench (pid:1360, stackpage=f569d000) Stack: c0182b3f f1c29480 00000001 00000012 00004812 00178a3c 00001000 c1abb7c0 f7bc2ca0 00000003 24000001 0000000b c01089d4 0000000b f7bb7000 f569def8 f569def8 c0298960 0000000b 00000003 c01089d4 0000000b f569def8 f7bc2ca0 Call Trace: [<c0182b3f>] [<c01087ce>] [<c01089d4>] [<c0120018>] [<c0127631>] [<c0133266>] [<c0132dd0>] [<c0132fce>] [<c0106f66>] Code: Bad EIP Value. >>EIP; 00000000 Before first symbol Trace; c0182b3f <do_ida_intr+20f/280> Trace; c01087ce <handle_IRQ_event+5e/90> Trace; c01089d4 <do_IRQ+a4/f0> Trace; c0120018 <exec_usermodehelper+38/400> Trace; c0127631 <generic_file_write+4e1/610> Trace; c0133266 <sys_write+96/d0> Trace; c0132dd0 <generic_file_llseek+0/b0> Trace; c0132fce <sys_lseek+be/d0> Trace; c0106f66 <system_call+2e/38> <0> Kernel panic: Aiee, killing interrupt handler! ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: preempt-patch cleared of blame 2001-11-08 3:48 ` preempt-patch cleared of blame J Sloan @ 2001-11-08 10:36 ` Jens Axboe 2001-11-08 12:23 ` Ingo Molnar 2001-11-09 1:35 ` Success with 2.4.14 on Compaq 6500 J Sloan 0 siblings, 2 replies; 20+ messages in thread From: Jens Axboe @ 2001-11-08 10:36 UTC (permalink / raw) To: J Sloan; +Cc: J Sloan, Robert Love, Linux kernel [-- Attachment #1: Type: text/plain, Size: 274 bytes --] On Wed, Nov 07 2001, J Sloan wrote: > I think there may be a problem with the > compaq smart/2p raid drivers, since > the "do_ida_intr" code keeps showing > up in the oops, and I have not seen a > problem with 2.4.14 on any other system. Does this fix it? -- Jens Axboe [-- Attachment #2: cpq-dequeue-1 --] [-- Type: text/plain, Size: 712 bytes --] --- drivers/block/cpqarray.c~ Thu Nov 8 11:33:11 2001 +++ drivers/block/cpqarray.c Thu Nov 8 11:35:31 2001 @@ -942,6 +942,8 @@ if ((c = cmd_alloc(h,1)) == NULL) goto startio; + blkdev_dequeue_request(creq); + spin_unlock_irq(&io_request_lock); bh = creq->bh; @@ -987,13 +989,10 @@ DBGPX( printk("Submitting %d sectors in %d segments\n", sect, seg); ); c->req.hdr.sg_cnt = seg; c->req.hdr.blk_cnt = creq->nr_sectors; - - spin_lock_irq(&io_request_lock); - - blkdev_dequeue_request(creq); - c->req.hdr.cmd = (creq->cmd == READ) ? IDA_READ : IDA_WRITE; c->type = CMD_RWREQ; + + spin_lock_irq(&io_request_lock); /* Put the request on the tail of the request queue */ addQ(&h->reqQ, c); ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: preempt-patch cleared of blame 2001-11-08 10:36 ` Jens Axboe @ 2001-11-08 12:23 ` Ingo Molnar 2001-11-08 11:38 ` Jens Axboe 2001-11-09 1:35 ` Success with 2.4.14 on Compaq 6500 J Sloan 1 sibling, 1 reply; 20+ messages in thread From: Ingo Molnar @ 2001-11-08 12:23 UTC (permalink / raw) To: Jens Axboe; +Cc: J Sloan, J Sloan, Robert Love, Linux kernel On Thu, 8 Nov 2001, Jens Axboe wrote: > On Wed, Nov 07 2001, J Sloan wrote: > > I think there may be a problem with the > > compaq smart/2p raid drivers, since > > the "do_ida_intr" code keeps showing > > up in the oops, and I have not seen a > > problem with 2.4.14 on any other system. > > Does this fix it? it did the trick on my system, which used to oops in/around do_ida_intr as well. Ingo ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: preempt-patch cleared of blame 2001-11-08 12:23 ` Ingo Molnar @ 2001-11-08 11:38 ` Jens Axboe 2001-11-08 11:41 ` [patch] cciss dequeue race fix (was Re: preempt-patch cleared of blame) Jens Axboe ` (2 more replies) 0 siblings, 3 replies; 20+ messages in thread From: Jens Axboe @ 2001-11-08 11:38 UTC (permalink / raw) To: Ingo Molnar; +Cc: J Sloan, J Sloan, Robert Love, Linux kernel On Thu, Nov 08 2001, Ingo Molnar wrote: > > On Thu, 8 Nov 2001, Jens Axboe wrote: > > > On Wed, Nov 07 2001, J Sloan wrote: > > > I think there may be a problem with the > > > compaq smart/2p raid drivers, since > > > the "do_ida_intr" code keeps showing > > > up in the oops, and I have not seen a > > > problem with 2.4.14 on any other system. > > > > Does this fix it? > > it did the trick on my system, which used to oops in/around do_ida_intr as > well. Good, so it was a dequeue race. Thanks Ingo. -- Jens Axboe ^ permalink raw reply [flat|nested] 20+ messages in thread
* [patch] cciss dequeue race fix (was Re: preempt-patch cleared of blame) 2001-11-08 11:38 ` Jens Axboe @ 2001-11-08 11:41 ` Jens Axboe 2001-11-08 12:05 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go Cyrus 2001-11-11 7:59 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.15-pre2...still testing Cyrus 2 siblings, 0 replies; 20+ messages in thread From: Jens Axboe @ 2001-11-08 11:41 UTC (permalink / raw) To: Linux Kernel [-- Attachment #1: Type: text/plain, Size: 630 bytes --] On Thu, Nov 08 2001, Jens Axboe wrote: > On Thu, Nov 08 2001, Ingo Molnar wrote: > > > > On Thu, 8 Nov 2001, Jens Axboe wrote: > > > > > On Wed, Nov 07 2001, J Sloan wrote: > > > > I think there may be a problem with the > > > > compaq smart/2p raid drivers, since > > > > the "do_ida_intr" code keeps showing > > > > up in the oops, and I have not seen a > > > > problem with 2.4.14 on any other system. > > > > > > Does this fix it? > > > > it did the trick on my system, which used to oops in/around do_ida_intr as > > well. > > Good, so it was a dequeue race. Thanks Ingo. BTW, cciss has a similar race. -- Jens Axboe [-- Attachment #2: cciss-dequeue-1 --] [-- Type: text/plain, Size: 625 bytes --] --- linux/drivers/block/cciss.c~ Thu Nov 8 11:36:24 2001 +++ linux/drivers/block/cciss.c Thu Nov 8 11:37:03 2001 @@ -1307,6 +1307,8 @@ if (( c = cmd_alloc(h, 1)) == NULL) goto startio; + blkdev_dequeue_request(creq); + spin_unlock_irq(&io_request_lock); c->cmd_type = CMD_RWREQ; @@ -1386,12 +1388,6 @@ spin_lock_irq(&io_request_lock); - blkdev_dequeue_request(creq); - - /* - * ehh, we can't really end the request here since it's not - * even started yet. for now it shouldn't hurt though - */ addQ(&(h->reqQ),c); h->Qdepth++; if(h->Qdepth > h->maxQsinceinit) ^ permalink raw reply [flat|nested] 20+ messages in thread
* AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-08 11:38 ` Jens Axboe 2001-11-08 11:41 ` [patch] cciss dequeue race fix (was Re: preempt-patch cleared of blame) Jens Axboe @ 2001-11-08 12:05 ` Cyrus 2001-11-08 17:14 ` Robert Love 2001-11-08 22:04 ` Jussi Laako 2001-11-11 7:59 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.15-pre2...still testing Cyrus 2 siblings, 2 replies; 20+ messages in thread From: Cyrus @ 2001-11-08 12:05 UTC (permalink / raw) To: Linux Kernel hi all, i've been having problems with starting my xserver all the time... my monitor tells me that i have no connection at all after starting X... complete system failure... no sysrq keys and stuff.. this is my fifth to seventh install of slackware 8 in approximately 3 weeks... errors in filesystems and reiserfs couldn't handle the crashing anymore and tells me i couldn't mount my root filesystem (superblock errors, etc.)... anyway, i'm just curious if this is about the radeon drivers or the amd 761 agpgart that Robert Love had made.. with all due respect to Robert he did a good job... my amd chipset wasn't even recognized before this patch-turned main stream kernel supported hardware...(but is it really supported?). my friend is also experiencing the same problems and he has the amd 751 chipset and the radeon combo as well... i've tried quite a lot of things just to make my machine perform like a real linux box should be but to no avail... X keeps me down as in crashes 7 out of 8 times i start X... i've read and researched on this issue for months and i'm still one of the guys who hasn't found the answer... if anyone could have pity on us amd and radeon owners and point us to the right path i would really appreciate it... i don't really want to spend more money to buy some new hardware again just to keep my system in tip-top shape... i've just spent a lot on my recent upgrade (motherboard and video card)... i had to replace two of my harddisks as well because they had bad sectors and such after all the crashing... hope anyone can enlighten us with this issue.... cheers!!! cyrus -- Cyrus Santos Registered Linux User # 220455 Sydney, Australia "To make mistakes is human, but to really foul things up requires a computer....." #!/bin/rm -Rf * ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-08 12:05 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go Cyrus @ 2001-11-08 17:14 ` Robert Love 2001-11-09 0:45 ` David S. Miller 2001-11-08 22:04 ` Jussi Laako 1 sibling, 1 reply; 20+ messages in thread From: Robert Love @ 2001-11-08 17:14 UTC (permalink / raw) To: Cyrus; +Cc: Linux Kernel On Thu, 2001-11-08 at 07:05, Cyrus wrote: > i've been having problems with starting my xserver all the time... my > monitor tells me that i have no connection at all after starting X... > complete system failure... no sysrq keys and stuff.. this is my fifth to > seventh install of slackware 8 in approximately 3 weeks... errors in > filesystems and reiserfs couldn't handle the crashing anymore and tells > me i couldn't mount my root filesystem (superblock errors, etc.)... > > anyway, i'm just curious if this is about the radeon drivers or the amd > 761 agpgart that Robert Love had made.. with all due respect to Robert > he did a good job... my amd chipset wasn't even recognized before this > patch-turned main stream kernel supported hardware...(but is it really > supported?). my friend is also experiencing the same problems and he has > the amd 751 chipset and the radeon combo as well... i've tried quite a > lot of things just to make my machine perform like a real linux box > should be but to no avail... X keeps me down as in crashes 7 out of 8 > times i start X... i've read and researched on this issue for months and > i'm still one of the guys who hasn't found the answer... I doubt its the AMD 761 AGPGART driver. It is easy to see if it is: don't load the AMD 761 driver. I think the DRI component of the ATI driver is all that uses AGPGART, so unload that too. Thus, see if just the Radeon with no DRI and no AGPGART is a problem. Robert Love ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-08 17:14 ` Robert Love @ 2001-11-09 0:45 ` David S. Miller 0 siblings, 0 replies; 20+ messages in thread From: David S. Miller @ 2001-11-09 0:45 UTC (permalink / raw) To: rml; +Cc: cyjamten, linux-kernel There are actually very huge issues with the AMD761 chipset and the current AGPGART drivers. There are several hardware workarounds necessary for that driver when using many AGP graphics cards, and I'm trying to get info out of AMD to deal with this. My radeon, which works perfectly fine with all current drivers on an ALI based chipset, will lockup when running quake3 or even running one of the xscreensaver OpenGL hacks. I honestly got myself an ALI based board for my Athlon XP cpus when I discovered these problems so that I can play quake3 while trying to get the info out of AMD :-) So that people don't think I'm talking out of my butt, have a look at this: http://www2.amd.com:80/us-en/assets/content_type/white_papers_and_tech_docs/24081.pdf On page 210 there is a section titled "AGP Miniport Driver Requirements", and to paraphrase this section basically tells the reader "Yes, there are problems with some AGP cards and the AMD761 chipset, to get that fixed just use our Windows drivers." Anyone who reads the current agpgart amd761 support, can tell pretty clearly that we don't have any of these mysterious workarounds implemented. Franks a lot, David S. Miller davem@redhat.com ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-08 12:05 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go Cyrus 2001-11-08 17:14 ` Robert Love @ 2001-11-08 22:04 ` Jussi Laako 2001-11-08 23:28 ` Alan Cox 1 sibling, 1 reply; 20+ messages in thread From: Jussi Laako @ 2001-11-08 22:04 UTC (permalink / raw) To: Cyrus; +Cc: linux-kernel Cyrus wrote: > > if anyone could have pity on us amd and radeon owners and point us to > the right path i would really appreciate it... i don't really want to > spend more money to buy some new hardware again just to keep my system I have similar configuration. Solution is to use latest -ac kernels and CVS version on XFree86... A7M266, RADEON DDR VE - Jussi Laako -- PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B 39DD A4DE 63EB C216 1E4B Available at PGP keyservers ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-08 22:04 ` Jussi Laako @ 2001-11-08 23:28 ` Alan Cox 2001-11-09 21:04 ` Jussi Laako 0 siblings, 1 reply; 20+ messages in thread From: Alan Cox @ 2001-11-08 23:28 UTC (permalink / raw) To: Jussi Laako; +Cc: Cyrus, linux-kernel > > if anyone could have pity on us amd and radeon owners and point us to > > the right path i would really appreciate it... i don't really want to > > spend more money to buy some new hardware again just to keep my system > > I have similar configuration. Solution is to use latest -ac kernels and CVS > version on XFree86... > > A7M266, RADEON DDR VE Everything needed should already be in Linus tree and current XFree86 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-08 23:28 ` Alan Cox @ 2001-11-09 21:04 ` Jussi Laako 2001-11-15 23:25 ` Stephen C. Tweedie 0 siblings, 1 reply; 20+ messages in thread From: Jussi Laako @ 2001-11-09 21:04 UTC (permalink / raw) To: Alan Cox; +Cc: Cyrus, linux-kernel Alan Cox wrote: > > > I have similar configuration. Solution is to use latest -ac kernels and > > CVS version on XFree86... > > > > A7M266, RADEON DDR VE > > Everything needed should already be in Linus tree and current XFree86 XFree86 4.1.0 doesn't work. Neither did rawhide 4.1.0 ~two months ago. Result was usually blank screen without signal and deadlock. Some versions did work when agpgart and DRI was disabled. Only CVS version worked with agpgart and DRI. Latest radeon DRI kernel module has been working for few months. Haven't been testing RedHat's versions of XFree86 since switching to CVS version. - Jussi Laako -- PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B 39DD A4DE 63EB C216 1E4B Available at PGP keyservers ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go... 2001-11-09 21:04 ` Jussi Laako @ 2001-11-15 23:25 ` Stephen C. Tweedie 0 siblings, 0 replies; 20+ messages in thread From: Stephen C. Tweedie @ 2001-11-15 23:25 UTC (permalink / raw) To: Jussi Laako; +Cc: Alan Cox, Cyrus, linux-kernel, Stephen Tweedie Hi, On Fri, Nov 09, 2001 at 11:04:45PM +0200, Jussi Laako wrote: > XFree86 4.1.0 doesn't work. Neither did rawhide 4.1.0 ~two months ago. > Result was usually blank screen without signal and deadlock. Some versions > did work when agpgart and DRI was disabled. Only CVS version worked with > agpgart and DRI. Latest radeon DRI kernel module has been working for few > months. > > Haven't been testing RedHat's versions of XFree86 since switching to CVS > version. Works just fine for me: the Red Hat 7.2 rpms of XFree86-4.1 include back-ports of the card init changes that went into the 4.1.99 cvs tree. Loss of vid signal and total system lockup were the symptoms I was seeing too before that was all fixed. Cheers, Stephen ^ permalink raw reply [flat|nested] 20+ messages in thread
* AMD761Agpgart+Radeon64DDR+kernel+2.4.15-pre2...still testing.... 2001-11-08 11:38 ` Jens Axboe 2001-11-08 11:41 ` [patch] cciss dequeue race fix (was Re: preempt-patch cleared of blame) Jens Axboe 2001-11-08 12:05 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go Cyrus @ 2001-11-11 7:59 ` Cyrus 2 siblings, 0 replies; 20+ messages in thread From: Cyrus @ 2001-11-11 7:59 UTC (permalink / raw) To: Linux Kernel [-- Attachment #1: Type: text/plain, Size: 2097 bytes --] hi all, My X server seems to be cooperating with me quite lately... I have tried a new XF86Config file which was patterned to the someone who sent his to me... Thanks for that!! anyway... for extra info here it is: root@matrix:~# lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700e (rev 13) 00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 700f 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 40) 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) 00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 16) 00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 16) 00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0a.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20) 00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 05) 00:0b.1 Input device controller: Creative Labs SB Live! (rev 05) 00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) 00:0d.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) 01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5144 part of glxinfo: iceman@matrix:~$ glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context client glx vendor string: SGI client glx version string: 1.2 client glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context GLX extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context OpenGL vendor string: VA Linux Systems, Inc. OpenGL renderer string: Mesa DRI Radeon 20010402 AGP 1x x86/MMX/3DNow! OpenGL version string: 1.2 Mesa 3.4.2 take note: Agp1x :( cheers!! cyrus -- Cyrus Santos Registered Linux User # 220455 Sydney, Australia "To make mistakes is human, but to really foul things up requires a computer....." #!/bin/rm -Rf * [-- Attachment #2: XF86Config --] [-- Type: text/plain, Size: 2830 bytes --] Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" # Load "xie" # Load "pex5" Load "GLcore" Load "glx" Load "dri" Load "dbe" Load "record" Load "v4l" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "BaudRate" "9600" Option "SampleRate" "300" EndSection Section "Monitor" Identifier "Monitor0" VendorName "API" HorizSync 30 - 70 VertRefresh 50 - 120 ModelName "Acer V771" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "ForcePCIMode" # [<bool>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "UseFBDev" # [<bool>] Identifier "Card0" Driver "ati" VendorName "ATI" BoardName "Radeon QD" BusID "PCI:1:5:0" #Option "AGPMode" "4" EndSection Section "Device" Identifier "Linux Frame Buffer" Driver "fbdev" BoardName "Frame Buffer" #Option "ShadowFB" "off" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection [-- Attachment #3: x.log --] [-- Type: text/plain, Size: 13537 bytes --] XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.2.19 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sun Nov 11 18:20:10 2001 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI: (0:13:0) BrookTree unknown chipset (0x036e) rev 2, Mem @ 0xdf000000/12 (--) PCI:*(1:5:0) ATI Radeon QD rev 0, Mem @ 0xe0000000/27, 0xde000000/19, I/O @ 0xd800/8, BIOS @ 0xdffe0000/17 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o (II) Module ati: vendor="The XFree86 Project" compiled for 4.1.0, module version = 6.3.6 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) v4l driver for Video4Linux (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE (AGP) (--) Chipset ATI Radeon QD (AGP) found (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o (II) Module radeon: vendor="The XFree86 Project" compiled for 4.1.0, module version = 4.0.1 (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) RADEON(0): PCI bus 1 card 5 func 0 (**) RADEON(0): Depth 24, (--) framebuffer bpp 32 (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) RADEON(0): Default visual is TrueColor (==) RADEON(0): RGB weight 888 (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) RADEON(0): initializing int10 (II) RADEON(0): Primary V_BIOS segment is: 0xc000 (--) RADEON(0): Chipset: "ATI Radeon QD (AGP)" (ChipID = 0x5144) (--) RADEON(0): Linear framebuffer at 0xe0000000 (--) RADEON(0): MMIO registers at 0xde000000 (--) RADEON(0): BIOS at 0xdffe0000 (--) RADEON(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM) (II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=18300 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) RADEON(0): VESA BIOS detected (II) RADEON(0): VESA VBE DDC supported (II) RADEON(0): Manufacturer: API Model: 1 Serial#: 150 (II) RADEON(0): Year: 2001 Week: 6 (II) RADEON(0): EDID Version: 1.2 (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) RADEON(0): Sync: Separate Composite (II) RADEON(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23 (II) RADEON(0): Gamma: 2.95 (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) RADEON(0): First detailed timing is preferred mode (II) RADEON(0): redX: 0.635 redY: 0.333 greenX: 0.284 greenY: 0.604 (II) RADEON(0): blueX: 0.151 blueY: 0.067 whiteX: 0.280 whiteY: 0.311 (II) RADEON(0): Supported VESA Video Modes: (II) RADEON(0): 720x400@70Hz (II) RADEON(0): 640x480@60Hz (II) RADEON(0): 640x480@72Hz (II) RADEON(0): 640x480@75Hz (II) RADEON(0): 800x600@56Hz (II) RADEON(0): 800x600@60Hz (II) RADEON(0): 800x600@72Hz (II) RADEON(0): 800x600@75Hz (II) RADEON(0): 1024x768@60Hz (II) RADEON(0): 1024x768@70Hz (II) RADEON(0): 1024x768@75Hz (II) RADEON(0): Manufacturer's mask: 0 (II) RADEON(0): Supported Future Video Modes: (II) RADEON(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) RADEON(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) RADEON(0): Supported additional Video Mode: (II) RADEON(0): clock: 94.5 MHz Image Size: 310 x 230 mm (II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 (II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) RADEON(0): Monitor name: Acer V771 (II) RADEON(0): Serial No: 00150 (II) RADEON(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEON(0): Monitor0: Using hsync range of 30.00-70.00 kHz (II) RADEON(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz (II) RADEON(0): Clock range: 12.00 to 350.00 MHz (II) RADEON(0): Not using default mode "1280x960" (hsync out of range) (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range) (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range) (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range) (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range) (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range) (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range) (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range) (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range) (--) RADEON(0): Virtual size is 1152x864 (pitch 1152) (**) RADEON(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (**) RADEON(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (**) RADEON(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (**) RADEON(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (--) RADEON(0): Display dimensions: (31, 23) cm (--) RADEON(0): DPI set to (94, 95) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) RADEON(0): Depth moves disabled by default (--) Depth 24 pixmap format is 32 bpp (==) RADEON(0): Write-combining range (0xe0000000,0x4000000) (WW) RADEON(0): Cannot read colourmap from VGA. Will restore with default (II) RADEON(0): [drm] loaded kernel module "radeon" (II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:5:0" (II) RADEON(0): [drm] added 4096 byte SAREA at 0xd49bf000 (II) RADEON(0): [drm] mapped SAREA 0xd49bf000 to 0x40017000 (II) RADEON(0): [drm] framebuffer handle = 0xe0000000 (II) RADEON(0): [drm] added 1 reserved context for kernel (II) RADEON(0): [agp] Mode 0x0f000211 [AGP 0x1022/0x700e; Card 0x1002/0x5144] (II) RADEON(0): [agp] 8192 kB allocated with handle 0xd89c2000 (II) RADEON(0): [agp] ring handle = 0xf0000000 (II) RADEON(0): [agp] Ring mapped at 0x4420e000 (II) RADEON(0): [agp] ring read ptr handle = 0xf0101000 (II) RADEON(0): [agp] Ring read ptr mapped at 0x40018000 (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xf0102000 (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4430f000 (II) RADEON(0): [agp] AGP texture map handle = 0xf0302000 (II) RADEON(0): [agp] AGP Texture map mapped at 0x4450f000 (II) RADEON(0): [drm] register handle = 0xde000000 (II) RADEON(0): [dri] Visual configs initialized (II) RADEON(0): CP in BM mode (II) RADEON(0): Using 8 MB AGP aperture (II) RADEON(0): Using 1 MB for the ring buffer (II) RADEON(0): Using 2 MB for vertex/indirect buffers (II) RADEON(0): Using 5 MB for AGP textures (II) RADEON(0): Memory manager initialized to (0,0) (1152,3504) (II) RADEON(0): Reserved area from (0,864) to (1152,866) (II) RADEON(0): Largest offscreen area available: 1152 x 2638 (II) RADEON(0): Reserved back buffer at offset 0xf68000 (II) RADEON(0): Reserved depth buffer at offset 0x1334000 (II) RADEON(0): Reserved 41984 kb for textures at offset 0x1700000 (==) RADEON(0): Backing store disabled (==) RADEON(0): Silken mouse enabled (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 17 256x256 slots 5 512x512 slots (II) RADEON(0): Acceleration enabled (II) RADEON(0): Using hardware cursor (scanline 3464) (II) RADEON(0): Largest offscreen area available: 1152 x 2636 (II) RADEON(0): X context handle = 0x00000001 (II) RADEON(0): [drm] installed DRM signal handler (II) RADEON(0): [DRI] installation complete (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers (II) RADEON(0): Direct rendering enabled (**) Mouse0: Protocol: "IMPS/2" (**) Mouse0: Core Pointer (==) Mouse0: Buttons: 3 (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: SampleRate: 300 (**) Mouse0: BaudRate: 9600 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list! Error reading volume for channel #1 cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory /usr/local/lib/xmms/Visualization/libbscopemax.so: undefined symbol: xmms_dga_leave cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory cannot open shared object file: cannot load shared object file: No such file or directory GetModeLine - scrn: 0 clock: 108000 GetModeLine - hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600 vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Success with 2.4.14 on Compaq 6500 2001-11-08 10:36 ` Jens Axboe 2001-11-08 12:23 ` Ingo Molnar @ 2001-11-09 1:35 ` J Sloan 1 sibling, 0 replies; 20+ messages in thread From: J Sloan @ 2001-11-09 1:35 UTC (permalink / raw) To: Jens Axboe; +Cc: J Sloan, Robert Love, Linux kernel Yes, I am happy to report that the server is standing up under a punishing dbench load without flinching - and my shell sessions remain snappy throuough the testins now. In addition to the stability and responsiveness, the dbench results are significantly better even than they were under 2.4.13 - Now to try again with -preempt.... Thanks for the fix, hope this goes mainstream asap - cu jjs Jens Axboe wrote: > On Wed, Nov 07 2001, J Sloan wrote: > > I think there may be a problem with the > > compaq smart/2p raid drivers, since > > the "do_ida_intr" code keeps showing > > up in the oops, and I have not seen a > > problem with 2.4.14 on any other system. > > Does this fix it? > > -- > Jens Axboe > > ------------------------------------------------------------------------ > > cpq-dequeue-1Name: cpq-dequeue-1 > Type: Plain Text (text/plain) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: AMD761Agpgart+Radeon64DDR+kernel+2.4.15-pre2...still testing....
@ 2001-11-13 20:23 Alex Deucher
0 siblings, 0 replies; 20+ messages in thread
From: Alex Deucher @ 2001-11-13 20:23 UTC (permalink / raw)
To: cyjamten, linux-kernel
add Option "AGPMode" "4" to the device section of your XF86Config file
to use 4x AGP.
Alex
------------------------------
hi all,
My X server seems to be cooperating with me quite lately... I have tried
a new XF86Config file which was patterned to the someone who sent his to
me... Thanks for that!! anyway... for extra info here it is:
root@matrix:~# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700e
(rev 13)
00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 700f
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev
40)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
06)
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 16)
00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686
[Apollo Super ACPI] (rev 40)
00:0a.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev
20)
00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10000
(rev 05)
00:0b.1 Input device controller: Creative Labs SB Live! (rev 05)
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 (rev
02)
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device
5144
part of glxinfo:
iceman@matrix:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
OpenGL vendor string: VA Linux Systems, Inc.
OpenGL renderer string: Mesa DRI Radeon 20010402 AGP 1x x86/MMX/3DNow!
OpenGL version string: 1.2 Mesa 3.4.2
take note: Agp1x :(
cheers!!
cyrus
^ permalink raw reply [flat|nested] 20+ messages in threadend of thread, other threads:[~2001-11-15 23:26 UTC | newest] Thread overview: 20+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2001-11-07 4:11 disaster with 2.4.14+preempt J Sloan 2001-11-07 5:07 ` Robert Love 2001-11-07 6:52 ` J Sloan 2001-11-07 21:17 ` J Sloan 2001-11-07 22:30 ` Robert Love 2001-11-08 3:48 ` preempt-patch cleared of blame J Sloan 2001-11-08 10:36 ` Jens Axboe 2001-11-08 12:23 ` Ingo Molnar 2001-11-08 11:38 ` Jens Axboe 2001-11-08 11:41 ` [patch] cciss dequeue race fix (was Re: preempt-patch cleared of blame) Jens Axboe 2001-11-08 12:05 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.14...no go Cyrus 2001-11-08 17:14 ` Robert Love 2001-11-09 0:45 ` David S. Miller 2001-11-08 22:04 ` Jussi Laako 2001-11-08 23:28 ` Alan Cox 2001-11-09 21:04 ` Jussi Laako 2001-11-15 23:25 ` Stephen C. Tweedie 2001-11-11 7:59 ` AMD761Agpgart+Radeon64DDR+kernel+2.4.15-pre2...still testing Cyrus 2001-11-09 1:35 ` Success with 2.4.14 on Compaq 6500 J Sloan -- strict thread matches above, loose matches on Subject: below -- 2001-11-13 20:23 AMD761Agpgart+Radeon64DDR+kernel+2.4.15-pre2...still testing Alex Deucher
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox