* /var corruption after 2.4.15 and 2.5.0 reboot
@ 2001-11-25 20:04 Niels Christiansen
2001-11-25 20:29 ` Davide Libenzi
0 siblings, 1 reply; 5+ messages in thread
From: Niels Christiansen @ 2001-11-25 20:04 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 4623 bytes --]
[1.] One line summary of the problem:
/var corruption after 2.4.15 and 2.5.0 reboot
[2.] Full description of the problem/report:
On a Dell Optiplex 300MHz PII I build 2.4.15 kernel and 2.5.0 kernel
for SMP with no errors and boot with no errors. When I reboot from
either kernel, the system pumps out error messages and ends the boot
after displaying that it starts logging. I can not boot until I
force a fsck on /var.
[3.] Keywords (i.e., modules, networking, kernel):
/lock/subsys, boot, file system
[4.] Kernel version (from /proc/version):
2.4.15 and 2.5.0 compiled with gcc 3.0.1
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
I attach excerpt from /var/log/messages after a restart where fsck
had to be run to clear the errors.
[6.] A small shell script or example program which triggers the
problem (if possible)
n/a
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
???
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 0
cpu MHz : 298.003
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat p
se36 mmx fxsr
bogomips : 594.73
[7.3.] Module information (from /proc/modules):
eepro100 17424 1 (autoclean)
3c59x 27264 0 (autoclean) (unused)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
0213-0213 : isapnp read
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f8-03ff : serial(auto)
0800-083f : Intel Corporation 82371AB PIIX4 ACPI
0840-085f : Intel Corporation 82371AB PIIX4 ACPI
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
c800-c8ff : Adaptec AHA-2940U2/W
cc80-ccbf : 3Com Corporation 3c905 100BaseTX [Boomerang]
cc80-ccbf : 00:11.0
cce0-ccff : Intel Corporation 82371AB PIIX4 USB
cce0-ccff : usb-uhci
d000-dfff : PCI Bus #02
dcc0-dcff : Intel Corporation 82557 [Ethernet Pro 100]
dcc0-dcff : eepro100
e000-efff : PCI Bus #01
ec00-ecff : ATI Technologies Inc 3D Rage Pro AGP 1X
ffa0-ffaf : Intel Corporation 82371AB PIIX4 IDE
ffa8-ffaf : ide1
cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cd7ff : Extension ROM
000d0000-000d17ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
00100000-002b64bf : Kernel code
002b64c0-0032481f : Kernel data
f0000000-f3ffffff : Intel Corporation 440LX/EX - 82443LX/EX Host
bridge
f5000000-f5ffffff : PCI Bus #02
f6000000-f6ffffff : PCI Bus #01
f7000000-f70000ff : Motorola SM56 PCI Modem
fa000000-fbffffff : PCI Bus #02
fae00000-faefffff : Intel Corporation 82557 [Ethernet Pro 100]
fafff000-faffffff : Intel Corporation 82557 [Ethernet Pro 100]
fafff000-faffffff : eepro100
fc000000-feffffff : PCI Bus #01
fcfff000-fcffffff : ATI Technologies Inc 3D Rage Pro AGP 1X
fd000000-fdffffff : ATI Technologies Inc 3D Rage Pro AGP 1X
ff000000-ff000fff : Adaptec AHA-2940U2/W
ff000000-ff000fff : aic7xxx
ffe00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
appended as vvv
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST118273LW Rev: 4244
Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
Regards,
Niels Christiansen
Linux Technology Center, Kernel Performance
Phone (512) 838 1243, Fax (512) 835 6441
(See attached file: messages)(See attached file: vvv)
[-- Attachment #2: messages --]
[-- Type: application/octet-stream, Size: 17395 bytes --]
Nov 25 04:22:11 encee syslogd 1.4-0: restart.
Nov 25 04:22:11 encee syslog: syslogd startup succeeded
Nov 25 04:22:11 encee syslog: klogd startup succeeded
Nov 25 04:22:11 encee kernel: klogd 1.4-0, log source = /proc/kmsg started.
Nov 25 04:22:11 encee kernel: Inspecting /boot/System.map
Nov 25 04:22:11 encee portmap: portmap startup succeeded
Nov 25 04:22:11 encee kernel: Symbol table has incorrect version number.
Nov 25 04:22:11 encee kernel: Cannot find map file.
Nov 25 04:22:11 encee kernel: Loaded 11 symbols from 2 modules.
Nov 25 04:22:11 encee kernel: Linux version 2.4.7-KP (nchris@encee.ribald.com) (gcc version 3.0.1) #5 SMP Thu Oct 25 23:59:34 CDT 2001
Nov 25 04:22:11 encee kernel: BIOS-provided physical RAM map:
Nov 25 04:22:11 encee kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 25 04:22:11 encee kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 25 04:22:11 encee kernel: BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Nov 25 04:22:11 encee kernel: BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Nov 25 04:22:11 encee kernel: Scan SMP from c0000000 for 1024 bytes.
Nov 25 04:22:11 encee kernel: Scan SMP from c009fc00 for 1024 bytes.
Nov 25 04:22:11 encee kernel: Scan SMP from c00f0000 for 65536 bytes.
Nov 25 04:22:12 encee nfslock: rpc.statd startup succeeded
Nov 25 04:22:12 encee kernel: Scan SMP from c009fc00 for 4096 bytes.
Nov 25 04:22:12 encee rpc.statd[478]: Version 0.3.1 Starting
Nov 25 04:22:12 encee kernel: On node 0 totalpages: 131072
Nov 25 04:22:12 encee kernel: zone(0): 4096 pages.
Nov 25 04:22:12 encee kernel: zone(1): 126976 pages.
Nov 25 04:22:12 encee kernel: zone(2): 0 pages.
Nov 25 04:22:12 encee keytable: Loading keymap:
Nov 25 04:22:12 encee kernel: mapped APIC to ffffe000 (01885000)
Nov 25 04:22:12 encee kernel: Kernel command line: auto BOOT_IMAGE=247-kp ro root=808 BOOT_FILE=/boot/247-kp
Nov 25 04:22:12 encee kernel: Initializing CPU#0
Nov 25 04:22:12 encee kernel: Detected 298.003 MHz processor.
Nov 25 04:22:12 encee kernel: Console: colour VGA+ 80x25
Nov 25 04:22:12 encee keytable:
Nov 25 04:22:12 encee kernel: Calibrating delay loop... 594.73 BogoMIPS
Nov 25 04:22:12 encee keytable: Loading system font:
Nov 25 04:22:12 encee kernel: Memory: 512348k/524288k available (1753k kernel code, 11556k reserved, 440k data, 268k init, 0k highmem)
Nov 25 04:22:12 encee kernel: Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 25 04:22:12 encee keytable:
Nov 25 04:22:12 encee kernel: Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 25 04:22:12 encee rc: Starting keytable: succeeded
Nov 25 04:22:12 encee kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Nov 25 04:22:12 encee kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 25 04:22:12 encee kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 25 04:22:12 encee kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Nov 25 04:22:12 encee kernel: CPU: L2 cache: 512K
Nov 25 04:22:12 encee kernel: Intel machine check architecture supported.
Nov 25 04:22:12 encee random: Initializing random number generator: succeeded
Nov 25 04:22:12 encee kernel: Intel machine check reporting enabled on CPU#0.
Nov 25 04:22:12 encee kernel: Enabling fast FPU save and restore... done.
Nov 25 04:22:12 encee kernel: Checking 'hlt' instruction... OK.
Nov 25 04:22:12 encee kernel: POSIX conformance testing by UNIFIX
Nov 25 04:22:12 encee kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Nov 25 04:22:12 encee kernel: CPU: L2 cache: 512K
Nov 25 04:22:12 encee kernel: Intel machine check reporting enabled on CPU#0.
Nov 25 04:22:12 encee kernel: CPU0: Intel Pentium II (Deschutes) stepping 00
Nov 25 04:22:12 encee kernel: per-CPU timeslice cutoff: 1462.77 usecs.
Nov 25 04:22:12 encee kernel: SMP motherboard not detected. Using dummy APIC emulation.
Nov 25 04:22:12 encee kernel: Setting commenced=1, go go go
Nov 25 04:22:12 encee kernel: PCI: PCI BIOS revision 2.10 entry at 0xfcaae, last bus=2
Nov 25 04:22:12 encee kernel: PCI: Using configuration type 1
Nov 25 04:22:12 encee kernel: PCI: Probing PCI hardware
Nov 25 04:22:12 encee kernel: PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Nov 25 04:22:12 encee kernel: Limiting direct PCI/PCI transfers.
Nov 25 04:22:12 encee kernel: isapnp: Scanning for PnP cards...
Nov 25 04:22:12 encee kernel: isapnp: Card 'CS4236B'
Nov 25 04:22:12 encee kernel: isapnp: 1 Plug & Play card detected total
Nov 25 04:22:12 encee kernel: Linux NET4.0 for Linux 2.4
Nov 25 04:22:12 encee kernel: Based upon Swansea University Computer Society NET3.039
Nov 25 04:22:12 encee kernel: Starting kswapd v1.8
Nov 25 04:22:12 encee kernel: pty: 256 Unix98 ptys configured
Nov 25 04:22:12 encee kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 25 04:22:12 encee kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 25 04:22:12 encee kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 25 04:22:13 encee kernel: Non-volatile memory driver v1.1
Nov 25 04:22:13 encee kernel: block: queued sectors max/low 340456kB/209384kB, 1024 slots per queue
Nov 25 04:18:48 encee rc.sysinit: Mounting proc filesystem: succeeded
Nov 25 04:22:13 encee kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Nov 25 04:18:48 encee sysctl: net.ipv4.ip_forward = 1
Nov 25 04:22:14 encee kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 25 04:18:48 encee sysctl: net.ipv4.conf.all.rp_filter = 1
Nov 25 04:22:14 encee kernel: PIIX4: IDE controller on PCI bus 00 dev 39
Nov 25 04:18:48 encee rc.sysinit: Configuring kernel parameters: succeeded
Nov 25 04:22:14 encee kernel: PIIX4: chipset revision 1
Nov 25 04:18:48 encee date: Sun Nov 25 04:18:35 CST 2001
Nov 25 04:22:14 encee kernel: PIIX4: not 100%% native mode: will probe irqs later
Nov 25 04:18:48 encee rc.sysinit: Setting clock (localtime): Sun Nov 25 04:18:35 CST 2001 succeeded
Nov 25 04:22:14 encee kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Nov 25 04:18:48 encee rc.sysinit: Loading default keymap succeeded
Nov 25 04:22:14 encee kernel: hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive
Nov 25 04:18:48 encee rc.sysinit: Setting default font (lat0-sun16): succeeded
Nov 25 04:22:14 encee kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 25 04:18:48 encee rc.sysinit: Activating swap partitions: succeeded
Nov 25 04:22:14 encee kernel: hdc: ATAPI 24X CD-ROM drive, 120kB Cache, DMA
Nov 25 04:18:48 encee rc.sysinit: Setting hostname encee.ribald.com: succeeded
Nov 25 04:22:14 encee kernel: Uniform CD-ROM driver Revision: 3.12
Nov 25 04:18:48 encee fsck: / was not cleanly unmounted, check forced.
Nov 25 04:22:14 encee kernel: Floppy drive(s): fd0 is 1.44M
Nov 25 04:18:48 encee fsck: /: 17593/66264 files (0.2% non-contiguous), 72763/265041 blocks
Nov 25 04:22:14 encee kernel: FDC 0 is a National Semiconductor PC87306
Nov 25 04:18:48 encee rc.sysinit: Checking root filesystem succeeded
Nov 25 04:22:14 encee kernel: Linux video capture interface: v1.00
Nov 25 04:18:48 encee rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Nov 25 04:22:14 encee kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Nov 25 04:18:49 encee rc.sysinit: Finding module dependencies: succeeded
Nov 25 04:22:14 encee kernel: agpgart: Maximum main memory to use for agp memory: 440M
Nov 25 04:18:49 encee fsck: /boot was not cleanly unmounted, check forced.
Nov 25 04:18:50 encee fsck: /boot: 37/14056 files (21.6% non-contiguous), 15935/56196 blocks
Nov 25 04:18:50 encee fsck: /home was not cleanly unmounted, check forced.
Nov 25 04:22:14 encee kernel: [drm] Initialized tdfx 1.0.0 20000928 on minor 63
Nov 25 04:19:13 encee fsck: /home: 14838/718080 files (10.3% non-contiguous), 359516/1433793 blocks
Nov 25 04:22:14 encee kernel: SCSI subsystem driver Revision: 1.00
Nov 25 04:19:14 encee fsck: /usr was not cleanly unmounted, check forced.
Nov 25 04:22:14 encee kernel: PCI: Found IRQ 10 for device 00:0e.0
Nov 25 04:21:51 encee fsck: /usr: 208441/718080 files (1.4% non-contiguous), 1074899/1433793 blocks
Nov 25 04:22:14 encee kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
Nov 25 04:21:52 encee fsck: /var was not cleanly unmounted, check forced.
Nov 25 04:22:14 encee kernel: <Adaptec 2940B Ultra2 SCSI adapter>
Nov 25 04:21:54 encee fsck: Entry 'kudzu' in /lock/subsys (30121) has deleted/unused inode 30125. CLEARED.
Nov 25 04:22:14 encee kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
Nov 25 04:21:54 encee fsck: /var: Entry 'ipchains' in /lock/subsys (30121) has deleted/unused inode 30126. CLEARED.
Nov 25 04:22:14 encee kernel:
Nov 25 04:21:54 encee fsck: /var: Entry 'network' in /lock/subsys (30121) has deleted/unused inode 30127. CLEARED.
Nov 25 04:22:14 encee kernel: Vendor: SEAGATE Model: ST118273LW Rev: 4244
Nov 25 04:21:54 encee fsck: /var: Entry 'syslog' in /lock/subsys (30121) has deleted/unused inode 30128. CLEARED.
Nov 25 04:22:15 encee kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 25 04:21:54 encee fsck: /var: Entry 'portmap' in /lock/subsys (30121) has deleted/unused inode 30129. CLEARED.
Nov 25 04:22:15 encee kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
Nov 25 04:21:54 encee fsck: /var: Entry 'nfslock' in /lock/subsys (30121) has deleted/unused inode 30130. CLEARED.
Nov 25 04:22:15 encee kernel: scsi0:0:0:0: Tagged Queuing enabled. Depth 253
Nov 25 04:21:54 encee fsck: /var: Entry 'random' in /lock/subsys (30121) has deleted/unused inode 30132. CLEARED.
Nov 25 04:22:15 encee kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 25 04:21:54 encee fsck: /var: Entry 'netfs' in /lock/subsys (30121) has deleted/unused inode 30133. CLEARED.
Nov 25 04:22:15 encee kernel: SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
Nov 25 04:21:54 encee fsck: /var: Entry 'autofs' in /lock/subsys (30121) has deleted/unused inode 30134. CLEARED.
Nov 25 04:22:15 encee kernel: Partition check:
Nov 25 04:21:54 encee fsck: /var: Entry 'local' in /lock/subsys (30121) has deleted/unused inode 30142.
Nov 25 04:22:15 encee kernel: sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
Nov 25 04:21:55 encee fsck: CLEARED.
Nov 25 04:22:15 encee kernel: es1371: version v0.30 time 22:04:05 Oct 25 2001
Nov 25 04:21:55 encee fsck: Entry 'syslogd.pid' in /run (38153) has deleted/unused inode 38192. CLEARED.
Nov 25 04:22:15 encee kernel: Linux Kernel Card Services 3.1.22
Nov 25 04:21:55 encee fsck: /var: Entry 'klogd.pid' in /run (38153) has deleted/unused inode 38193. CLEARED.
Nov 25 04:22:15 encee kernel: options: [pci] [cardbus] [pm]
Nov 25 04:21:55 encee fsck: /var: 457/66264 files (10.5% non-contiguous), 37596/265041 blocks
Nov 25 04:22:15 encee kernel: usb.c: registered new driver hub
Nov 25 04:21:55 encee rc.sysinit: Checking filesystems succeeded
Nov 25 04:22:15 encee kernel: PCI: Found IRQ 14 for device 00:07.2
Nov 25 04:21:55 encee rc.sysinit: Mounting local filesystems: succeeded
Nov 25 04:22:15 encee kernel: PCI: Sharing IRQ 14 with 00:11.0
Nov 25 04:21:55 encee rc.sysinit: Turning on user and group quotas for local filesystems: succeeded
Nov 25 04:22:15 encee kernel: uhci.c: USB UHCI at I/O 0xcce0, IRQ 14
Nov 25 04:21:56 encee rc.sysinit: Enabling swap space: succeeded
Nov 25 04:22:15 encee kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 25 04:21:58 encee init: Entering runlevel: 5
Nov 25 04:22:15 encee kernel: hub.c: USB hub found
Nov 25 04:21:59 encee kudzu: Updating /etc/fstab succeeded
Nov 25 04:22:15 encee kernel: hub.c: 2 ports detected
Nov 25 04:22:09 encee kudzu: succeeded
Nov 25 04:22:15 encee kernel: uhci.c: :USB Universal Host Controller Interface driver
Nov 25 04:22:09 encee sysctl: net.ipv4.ip_forward = 1
Nov 25 04:22:15 encee kernel: Initializing USB Mass Storage driver...
Nov 25 04:22:09 encee sysctl: net.ipv4.conf.all.rp_filter = 1
Nov 25 04:22:15 encee kernel: usb.c: registered new driver usb-storage
Nov 25 04:22:09 encee network: Setting network parameters: succeeded
Nov 25 04:22:15 encee kernel: USB Mass Storage support registered.
Nov 25 04:22:10 encee network: Bringing up interface lo: succeeded
Nov 25 04:22:15 encee kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 25 04:22:11 encee network: Bringing up interface eth1: succeeded
Nov 25 04:22:15 encee kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 25 04:22:15 encee kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 25 04:22:15 encee kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 25 04:22:15 encee kernel: IPv4 over IPv4 tunneling driver
Nov 25 04:22:15 encee kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 25 04:22:15 encee kernel: IPv6 v0.8 for NET4.0
Nov 25 04:22:15 encee kernel: IPv6 over IPv4 tunneling driver
Nov 25 04:22:15 encee kernel: ds: no socket drivers loaded!
Nov 25 04:22:15 encee kernel: VFS: Mounted root (ext2 filesystem) readonly.
Nov 25 04:22:15 encee kernel: Freeing unused kernel memory: 268k freed
Nov 25 04:22:15 encee kernel: Adding Swap: 1052216k swap-space (priority -1)
Nov 25 04:22:15 encee kernel: PCI: Found IRQ 14 for device 00:11.0
Nov 25 04:22:16 encee kernel: PCI: Sharing IRQ 14 with 00:07.2
Nov 25 04:22:16 encee kernel: 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html
Nov 25 04:22:16 encee kernel: See Documentation/networking/vortex.txt
Nov 25 04:22:16 encee kernel: 00:11.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xcc80, 00:c0:4f:93:36:32, IRQ 14
Nov 25 04:22:16 encee kernel: product code 0000 rev 00.0 date 07-03-97
Nov 25 04:22:16 encee kernel: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
Nov 25 04:22:16 encee kernel: MII transceiver found at address 24, status 7849.
Nov 25 04:22:16 encee kernel: Enabling bus-master transmits and whole-frame receives.
Nov 25 04:22:16 encee kernel: 00:11.0: scatter/gather enabled. h/w checksums disabled
Nov 25 04:22:16 encee kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Nov 25 04:22:16 encee kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Nov 25 04:22:16 encee kernel: PCI: Found IRQ 9 for device 02:09.0
Nov 25 04:22:16 encee kernel: eth1: OEM i82557/i82558 10/100 Ethernet, 00:02:55:32:FC:43, IRQ 9.
Nov 25 04:22:16 encee kernel: Board assembly 729857-009, Physical connectors present: RJ45
Nov 25 04:22:16 encee kernel: Primary interface chip i82555 PHY #1.
Nov 25 04:22:16 encee kernel: General self-test: passed.
Nov 25 04:22:16 encee kernel: Serial sub-system self-test: passed.
Nov 25 04:22:16 encee kernel: Internal registers self-test: passed.
Nov 25 04:22:16 encee kernel: ROM checksum self-test: passed (0x04f4518b).
Nov 25 04:22:16 encee netfs: Mounting other filesystems: succeeded
Nov 25 04:22:16 encee autofs: autofs startup succeeded
Nov 25 04:22:16 encee automount[598]: starting automounter version 3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc
Nov 25 04:22:17 encee atd: atd startup succeeded
Nov 25 04:22:17 encee automount[598]: using kernel protocol version 3
Nov 25 04:22:17 encee sshd: Starting sshd:
Nov 25 04:22:17 encee sshd: succeeded
Nov 25 04:22:17 encee sshd:
Nov 25 04:22:17 encee rc: Starting sshd: succeeded
Nov 25 04:22:18 encee xinetd[645]: chargen disabled, removing
Nov 25 04:22:18 encee xinetd[645]: ftp disabled, removing
Nov 25 04:22:18 encee xinetd[645]: time disabled, removing
Nov 25 04:22:18 encee xinetd[645]: time disabled, removing
Nov 25 04:22:18 encee xinetd[645]: chargen-udp disabled, removing
Nov 25 04:22:18 encee xinetd[645]: talk disabled, removing
Nov 25 04:22:18 encee xinetd[645]: rsync disabled, removing
Nov 25 04:22:18 encee xinetd[645]: shell disabled, removing
Nov 25 04:22:18 encee xinetd[645]: login disabled, removing
Nov 25 04:22:18 encee xinetd[645]: exec disabled, removing
Nov 25 04:22:18 encee xinetd[645]: ntalk disabled, removing
Nov 25 04:22:18 encee xinetd[645]: daytime disabled, removing
Nov 25 04:22:18 encee xinetd[645]: ftp disabled, removing
Nov 25 04:22:18 encee xinetd[645]: finger disabled, removing
Nov 25 04:22:18 encee xinetd[645]: echo-udp disabled, removing
Nov 25 04:22:18 encee xinetd[645]: echo disabled, removing
Nov 25 04:22:18 encee xinetd[645]: daytime-udp disabled, removing
Nov 25 04:22:18 encee xinetd[645]: xinetd Version 2.1.8.9pre14 started with
Nov 25 04:22:18 encee xinetd[645]: libwrap
Nov 25 04:22:18 encee xinetd[645]: options compiled in.
Nov 25 04:22:18 encee xinetd[645]: Started working: 2 available services
Nov 25 04:22:21 encee xinetd: xinetd startup succeeded
Nov 25 04:22:22 encee gpm: gpm startup succeeded
Nov 25 04:22:23 encee crond: crond startup succeeded
Nov 25 04:22:23 encee xfs: listening on port 7100
Nov 25 04:22:23 encee xfs: xfs startup succeeded
Nov 25 04:22:24 encee anacron: anacron startup succeeded
[-- Attachment #3: vvv --]
[-- Type: application/octet-stream, Size: 6344 bytes --]
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fc000000-feffffff
Prefetchable memory behind bridge: f6000000-f6ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 14
Region 4: I/O ports at cce0 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0d.0 Communication controller: Motorola SM56 PCI Modem
Subsystem: Motorola SM56 PCI Speakerphone Modem
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7000000 (32-bit, prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0e.0 SCSI storage controller: Adaptec AHA-2940U2/W
Subsystem: Adaptec: Unknown device a100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (9750ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
BIST result: 00
Region 0: I/O ports at c800 [disabled] [size=256]
Region 1: Memory at ff000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f5000000-00000000f5f00000
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:11.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
Subsystem: Unknown device 00dc:006f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at cc80 [size=64]
Expansion ROM at f9000000 [disabled] [size=64K]
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X (rev 5c) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 406f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=255 SBA+ 64bit- FW- Rate=x1
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
02:09.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
Subsystem: IBM: Unknown device 305c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fafff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at dcc0 [size=64]
Region 2: Memory at fae00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fb000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: /var corruption after 2.4.15 and 2.5.0 reboot
2001-11-25 20:04 Niels Christiansen
@ 2001-11-25 20:29 ` Davide Libenzi
2001-11-25 20:32 ` Phil Sorber
0 siblings, 1 reply; 5+ messages in thread
From: Davide Libenzi @ 2001-11-25 20:29 UTC (permalink / raw)
To: Niels Christiansen; +Cc: linux-kernel
On Sun, 25 Nov 2001, Niels Christiansen wrote:
[...]
Pls apply Al's patch or use Linus's -pre01
- Davide
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: /var corruption after 2.4.15 and 2.5.0 reboot
2001-11-25 20:29 ` Davide Libenzi
@ 2001-11-25 20:32 ` Phil Sorber
2001-11-25 21:02 ` Davide Libenzi
0 siblings, 1 reply; 5+ messages in thread
From: Phil Sorber @ 2001-11-25 20:32 UTC (permalink / raw)
To: Davide Libenzi; +Cc: Niels Christiansen, linux-kernel@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 248 bytes --]
On Sun, 2001-11-25 at 15:29, Davide Libenzi wrote:
>
> Pls apply Al's patch or use Linus's -pre01
isn't it marcello's pre1 now?
--
Phil Sorber
AIM: PSUdaemon
IRC: irc.openprojects.net #psulug PSUdaemon
GnuPG: keyserver - pgp.mit.edu
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: /var corruption after 2.4.15 and 2.5.0 reboot
2001-11-25 20:32 ` Phil Sorber
@ 2001-11-25 21:02 ` Davide Libenzi
0 siblings, 0 replies; 5+ messages in thread
From: Davide Libenzi @ 2001-11-25 21:02 UTC (permalink / raw)
To: Phil Sorber; +Cc: Niels Christiansen, linux-kernel@vger.kernel.org
On 25 Nov 2001, Phil Sorber wrote:
> On Sun, 2001-11-25 at 15:29, Davide Libenzi wrote:
> >
> > Pls apply Al's patch or use Linus's -pre01
>
> isn't it marcello's pre1 now?
I meant Linus's 2.5.1-pre1 but I forgot Marcello's 2.4.16-pre1.
Sorry Marcello :)
- Davide
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: /var corruption after 2.4.15 and 2.5.0 reboot
[not found] <fa.l99gmcv.1agq8qd@ifi.uio.no>
@ 2001-11-25 22:03 ` Pawel Worach
0 siblings, 0 replies; 5+ messages in thread
From: Pawel Worach @ 2001-11-25 22:03 UTC (permalink / raw)
To: Niels Christiansen; +Cc: linux-kernel
Niels Christiansen wrote:
> [1.] One line summary of the problem:
> /var corruption after 2.4.15 and 2.5.0 reboot
Both the 2.4.15 and 2.5.0 kernels have a filesystem corruption bug,
don't use them. Please apply the 2.4.16-pre1 (or 2.5.1-pre1) patch,
you can find it on http://www.kernel.org/.
Regards
Pawel Worach
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2001-11-25 22:00 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <fa.l99gmcv.1agq8qd@ifi.uio.no>
2001-11-25 22:03 ` /var corruption after 2.4.15 and 2.5.0 reboot Pawel Worach
2001-11-25 20:04 Niels Christiansen
2001-11-25 20:29 ` Davide Libenzi
2001-11-25 20:32 ` Phil Sorber
2001-11-25 21:02 ` Davide Libenzi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox