Re: Routing table problems

[Madhav Diwan <mdiwan@wagweb.com>]

  Use the ifdown and ifup commands instead .. your default routes will
return

 read the scripts in /etc/sysconfig/network-scripts/ for more info.

Madhav Diwan



Doug McNaught wrote:
> 
> "Rajasekhar Inguva" <irajasek@in.ibm.com> writes:
> 
> > Hi All, In continuation to my earlier report ...
> >
> > The problem is only seen with the default gateway entry.
> >
> > The gateway entry for my subnet is also deleted during a 'down', but is
> > restored properly after an 'up' .
> 
> The default gateway route is installed at boot time by a separate
> 'route' command.  'ifconfig' can derive your subnet route from the
> address and mask of the interface, but it can't magically determine
> your default gateway.  Add it yourself using "route" or "ip" or rerun
> your network start scripts.
> 
> In short, "Working as Designed".
> 
> -Doug
> --
> Let us cross over the river, and rest under the shade of the trees.
>    --T. J. Jackson, 1863
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/