From: Doug Ledford <dledford@redhat.com>
To: Nathan Bryant <nbryant@optonline.net>
Cc: Mario Mikocevic <mozgy@hinet.hr>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: i810 audio patch
Date: Tue, 04 Dec 2001 14:21:34 -0500 [thread overview]
Message-ID: <3C0D223E.3020904@redhat.com> (raw)
In-Reply-To: <3C0C16E7.70206@optonline.net> <3C0C508C.40407@redhat.com> <3C0C58DE.9020703@optonline.net> <3C0C5CB2.6000602@optonline.net> <3C0C61CC.1060703@redhat.com> <20011204153507.A842@danielle.hinet.hr> <3C0D1DD2.4040609@optonline.net>
Nathan Bryant wrote:
> Mario Mikocevic wrote:
>
>> modprobe produced an oops (17-pre2), module is left in init state :
>>
> Yep. In the i810_configure_clocking() function, immediately before the
> call to i810_set_dac_rate(), add a line "clocking = 48000;"
>
There is a new version of the driver (0.07) on my web site. It has this
issue and one other issue fixed (hopefully). The other issue is when
using artsd with the 0.06 driver, I had a report that artsd would end up
waiting on select forever and never getting woken up. The 0.07 driver
changes wait queue and lvi handling in a few strategic places, so it
should work. However, it's untested. Reports welcome.
Complete c file: http://people.redhat.com/dledford/i810_audio.c.gz
--
Doug Ledford <dledford@redhat.com> http://people.redhat.com/dledford
Please check my web site for aic7xxx updates/answers before
e-mailing me about problems
next prev parent reply other threads:[~2001-12-04 19:24 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-04 0:20 i810 audio patch Nathan Bryant
2001-12-04 4:26 ` Doug Ledford
[not found] ` <3C0C58DE.9020703@optonline.net>
2001-12-04 5:18 ` Nathan Bryant
2001-12-04 5:40 ` Doug Ledford
2001-12-04 6:07 ` Nathan Bryant
2001-12-04 7:08 ` Nathan Bryant
2001-12-04 16:46 ` Doug Ledford
2001-12-04 20:14 ` Nathan Bryant
2001-12-04 20:16 ` Doug Ledford
2001-12-04 14:35 ` Mario Mikocevic
2001-12-04 19:02 ` Nathan Bryant
2001-12-04 19:21 ` Doug Ledford [this message]
2001-12-04 20:41 ` Nathan Bryant
2001-12-04 21:15 ` Doug Ledford
2001-12-04 21:39 ` Nathan Bryant
2001-12-04 21:53 ` Nathan Bryant
2001-12-04 22:29 ` Nathan Bryant
2001-12-04 22:49 ` Nathan Bryant
2001-12-04 23:09 ` Doug Ledford
2001-12-04 23:31 ` Nathan Bryant
2001-12-04 23:44 ` Doug Ledford
2001-12-05 1:26 ` Nathan Bryant
2001-12-05 2:48 ` Nathan Bryant
2001-12-05 3:05 ` Doug Ledford
2001-12-05 3:28 ` Nathan Bryant
2001-12-05 4:25 ` Doug Ledford
2001-12-05 5:14 ` Nathan Bryant
2001-12-05 5:23 ` Doug Ledford
2001-12-05 20:04 ` Nathan Bryant
2001-12-05 20:05 ` Nathan Bryant
2001-12-05 20:10 ` Doug Ledford
2001-12-05 21:12 ` Nathan Bryant
2001-12-05 21:25 ` Doug Ledford
2001-12-05 21:36 ` Nathan Bryant
2001-12-05 21:56 ` Nathan Bryant
2001-12-05 22:31 ` Doug Ledford
2001-12-05 22:43 ` Doug Ledford
2001-12-05 23:46 ` Nathan Bryant
2001-12-05 23:51 ` Doug Ledford
2001-12-05 23:57 ` Nathan Bryant
2001-12-06 0:25 ` Doug Ledford
2001-12-06 0:50 ` Nathan Bryant
[not found] ` <3C0EC0ED.3000603@optonl! ine.net>
2001-12-06 0:55 ` Doug Ledford
[not found] ` <3C0EC219.8010107@redhat! .com>
2001-12-06 2:53 ` Nathan Bryant
[not found] ` <3C0EDDC2.608@optonl! ine.net>
2001-12-06 3:39 ` Doug Ledford
[not found] ` <3C0EC219.8010107@redhat!.com>
[not found] ` <3C0EE865.1090607@red! hat.com>
2001-12-06 4:02 ` Nathan Bryant
2001-12-06 4:09 ` Doug Ledford
2001-12-06 15:45 ` i810 audio patch (it _works_ for me :) Mario Mikocevic
2001-12-06 17:00 ` i810 audio patch Pascal Junod
2001-12-05 4:41 ` Nathan Bryant
2001-12-05 5:10 ` Doug Ledford
2001-12-05 5:35 ` Nathan Bryant
2001-12-05 7:24 ` Nathan Bryant
2001-12-04 23:05 ` Doug Ledford
2001-12-04 9:03 ` Alan Cox
-- strict thread matches above, loose matches on Subject: below --
2001-12-06 19:49 Nathan Bryant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C0D223E.3020904@redhat.com \
--to=dledford@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mozgy@hinet.hr \
--cc=nbryant@optonline.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox