* PROBLEM: Kernel Oops on cat /proc/ioports
@ 2001-12-11 12:29 Berend De Schouwer
2001-12-12 0:22 ` Randy.Dunlap
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Berend De Schouwer @ 2001-12-11 12:29 UTC (permalink / raw)
To: linux-kernel
[1.] One line summary of the problem:
Running "cat /proc/ioports" causes a segfault and kernel oops.
[2.] Full description of the problem/report:
Running "cat /proc/ioports" may cause cat to segfault, and the kernel to
Oops. It doesn't happen immediately after boot -- its required to run
the kernel for some time (minimum two days for me), and make it do some
work.
[3.] Keywords (i.e., modules, networking, kernel):
kernel, proc
[4.] Kernel version (from /proc/version):
Linux version 2.4.14 (root@clo002c.clobea.co.za)
(gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81))
#3 SMP Mon Nov 12 15:34:14 SAST 2001
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
Unable to handle kernel paging request at virtual address f886bc55
printing eip:
c02a925b
*pde = 37bb5067
*pte = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[vsnprintf+523/1056] Not tainted
EIP: 0010:[<c02a925b>] Not tainted
EFLAGS: 00010297
eax: f886bc55 ebx: d957f16c ecx: f886bc55 edx: fffffffe
esi: ffffffff edi: e98ddec4 ebp: ffffffff esp: e98dde6c
ds: 0018 es: 0018 ss: 0018
Process cat (pid: 29869, stackpage=e98dd000)
Stack: 00000000 ffffffff 0000000a d760e480 d957f15e 00000006 d9580000 c02a94a6
d957f15e 26a80ea2 c02bd8a6 e98ddeb8 c02a94c4 d957f15e c02bd895 e98ddeb8
c011dcfb d957f15e c02bd895 00003000 0000307f f886bc55 c2838478 d957f15e
Call Trace: [vsprintf+22/32] [sprintf+20/32] [do_resource_list+75/128] [do_resource_list+107/128] [get_resource_list+66/96]
Call Trace: [<c02a94a6>] [<c02a94c4>] [<c011dcfb>] [<c011dd1b>] [<c011dd72>]
[ioports_read_proc+46/96] [proc_file_read+206/400] [sys_read+150/208] [sys_brk+186/240] [system_call+51/56]
[<c0154eae>] [<c0152a3e>] [<c01368f6>] [<c0127caa>] [<c010712b>]
Code: 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 f6 04 24 10 89 c6
and ksymoops < oops:
Warning (compare_maps): mismatch on symbol partition_name , ksyms_base
says c0254350, System.map says c01560b0. Ignoring ksyms_base entry
>>EIP; c02a925b <vsnprintf+20b/420> <=====
Trace; c02a94a6 <vsprintf+16/20>
Trace; c02a94c4 <sprintf+14/20>
Trace; c011dcfb <do_resource_list+4b/80>
Trace; c011dd1b <do_resource_list+6b/80>
Trace; c011dd72 <get_resource_list+42/60>
Trace; c0154eae <ioports_read_proc+2e/60>
Trace; c0152a3e <proc_file_read+ce/190>
Trace; c01368f6 <sys_read+96/d0>
Trace; c0127caa <sys_brk+ba/f0>
Trace; c010712b <system_call+33/38>
Code; c02a925b <vsnprintf+20b/420>
00000000 <_EIP>:
Code; c02a925b <vsnprintf+20b/420> <=====
0: 80 38 00 cmpb $0x0,(%eax) <=====
Code; c02a925e <vsnprintf+20e/420>
3: 74 07 je c <_EIP+0xc> c02a9267 <vsnprintf+217/420>
Code; c02a9260 <vsnprintf+210/420>
5: 40 inc %eax
Code; c02a9261 <vsnprintf+211/420>
6: 4a dec %edx
Code; c02a9262 <vsnprintf+212/420>
7: 83 fa ff cmp $0xffffffff,%edx
Code; c02a9265 <vsnprintf+215/420>
a: 75 f4 jne 0 <_EIP>
Code; c02a9267 <vsnprintf+217/420>
c: 29 c8 sub %ecx,%eax
Code; c02a9269 <vsnprintf+219/420>
e: f6 04 24 10 testb $0x10,(%esp,1)
Code; c02a926d <vsnprintf+21d/420>
12: 89 c6 mov %eax,%esi
[6.] A small shell script or example program which triggers the
problem (if possible)
cat /proc/ioports
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux clo002c.clobea.co.za 2.4.14 #3 SMP Mon Nov 12 15:34:14 SAST 2001 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.91.0.2
util-linux 2.11b
mount 2.11b
modutils 2.4.2
e2fsprogs 1.19
PPP 2.4.0
isdn4k-utils 3.1pre1
Linux C Library 2.2.2
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.57
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded cyclades eepro100
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 999.584
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1992.29
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 999.584
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1998.84
[7.3.] Module information (from /proc/modules):
cyclades 147616 16 (autoclean)
eepro100 16960 1 (autoclean)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
I can't add this :( It causes the oops.
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: ServerWorks CNB20LE (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32, cache line size 08
00:00.1 Host bridge: ServerWorks CNB20LE (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
00:07.0 Communication controller: Cyclades Corporation Cyclom_Y below first megabyte (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 25
Region 0: Memory at 61100000 (32-bit, non-prefetchable) [size=128]
Region 1: I/O ports at 3000 [size=128]
Region 2: Memory at 000dc000 (low-1M, non-prefetchable) [size=16K]
Expansion ROM at 61120000 [disabled] [size=4K]
00:0b.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 63200000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3800 [size=64]
Region 2: Memory at 63300000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at 63400000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0d.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 65) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 62000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 3400 [size=256]
Region 2: Memory at 61400000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 61420000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: ServerWorks OSB4 (rev 50)
Subsystem: ServerWorks OSB4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 30c0 [size=16]
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04) (prog-if 10 [OHCI])
Subsystem: ServerWorks: Unknown device 0220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: Memory at 63f00000 (32-bit, non-prefetchable) [size=4K]
01:03.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Citicorp TTI: Unknown device 10e3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 5000 [disabled] [size=256]
Region 1: Memory at 63c20000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 63c40000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:03.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Citicorp TTI: Unknown device 10e3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin B routed to IRQ 18
BIST result: 00
Region 0: I/O ports at 5400 [disabled] [size=256]
Region 1: Memory at 63c21000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 63c60000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:06.0 PCI bridge: Intel Corporation: Unknown device 0962 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
01:06.1 RAID bus controller: Mylex Corporation: Unknown device 0050 (rev 02)
Subsystem: Mylex Corporation: Unknown device 0052
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 63e00000 (32-bit, prefetchable) [size=8K]
Expansion ROM at 63c00000 [disabled] [size=32K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: DEC Model: DLT2000 Rev: 8B37
Type: Sequential-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
cat /proc/meminfo:
total: used: free: shared: buffers: cached:
Mem: 1582149632 1576222720 5926912 0 868352 706162688
Swap: 271392768 15073280 256319488
MemTotal: 1545068 kB
MemFree: 5788 kB
MemShared: 0 kB
Buffers: 848 kB
Cached: 685944 kB
SwapCached: 3668 kB
Active: 1145656 kB
Inactive: 334440 kB
HighTotal: 655296 kB
HighFree: 2044 kB
LowTotal: 889772 kB
LowFree: 3744 kB
SwapTotal: 265032 kB
SwapFree: 250312 kB
[X.] Other notes, patches, fixes, workarounds:
I've had it with 2.4.12, 2.4.12-ac, and 2.4.14. I've tested the RAM
with memtest86, and memtest, and haven't found a problem yet. Oddly
enough I can run "cat /proc/ioports" right after the machine boots, but
not after its done some work. The address listed in "Cannot handle
kernel paging request" is always the same. Workaround: don't do that.
Thank you
--
Berend De Schouwer
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-11 12:29 PROBLEM: Kernel Oops on cat /proc/ioports Berend De Schouwer
@ 2001-12-12 0:22 ` Randy.Dunlap
2001-12-12 0:31 ` {multiple} " Randy.Dunlap
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Randy.Dunlap @ 2001-12-12 0:22 UTC (permalink / raw)
To: Berend De Schouwer; +Cc: linux-kernel
On 11 Dec 2001, Berend De Schouwer wrote:
| [1.] One line summary of the problem:
|
| Running "cat /proc/ioports" causes a segfault and kernel oops.
|
|
| [2.] Full description of the problem/report:
|
| Running "cat /proc/ioports" may cause cat to segfault, and the kernel to
| Oops. It doesn't happen immediately after boot -- its required to run
| the kernel for some time (minimum two days for me), and make it do some
| work.
|
|
| [3.] Keywords (i.e., modules, networking, kernel):
|
| kernel, proc
|
|
| [4.] Kernel version (from /proc/version):
|
| Linux version 2.4.14 (root@clo002c.clobea.co.za)
| (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81))
| #3 SMP Mon Nov 12 15:34:14 SAST 2001
Have you tried any newer kernels? (although I don't see any
changes in this area)
| [5.] Output of Oops.. message (if applicable) with symbolic information
| resolved (see Documentation/oops-tracing.txt)
|
| Unable to handle kernel paging request at virtual address f886bc55
| printing eip:
| c02a925b
| *pde = 37bb5067
| *pte = 00000000
| Oops: 0000
| CPU: 0
| EIP: 0010:[vsnprintf+523/1056] Not tainted
| EIP: 0010:[<c02a925b>] Not tainted
| EFLAGS: 00010297
| eax: f886bc55 ebx: d957f16c ecx: f886bc55 edx: fffffffe
| esi: ffffffff edi: e98ddec4 ebp: ffffffff esp: e98dde6c
| ds: 0018 es: 0018 ss: 0018
| Process cat (pid: 29869, stackpage=e98dd000)
| Stack: 00000000 ffffffff 0000000a d760e480 d957f15e 00000006 d9580000 c02a94a6
| d957f15e 26a80ea2 c02bd8a6 e98ddeb8 c02a94c4 d957f15e c02bd895 e98ddeb8
| c011dcfb d957f15e c02bd895 00003000 0000307f f886bc55 c2838478 d957f15e
| Call Trace: [vsprintf+22/32] [sprintf+20/32] [do_resource_list+75/128] [do_resource_list+107/128] [get_resource_list+66/96]
| Call Trace: [<c02a94a6>] [<c02a94c4>] [<c011dcfb>] [<c011dd1b>] [<c011dd72>]
| [ioports_read_proc+46/96] [proc_file_read+206/400] [sys_read+150/208] [sys_brk+186/240] [system_call+51/56]
| [<c0154eae>] [<c0152a3e>] [<c01368f6>] [<c0127caa>] [<c010712b>]
| Code: 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 f6 04 24 10 89 c6
|
| and ksymoops < oops:
|
| Warning (compare_maps): mismatch on symbol partition_name , ksyms_base
| says c0254350, System.map says c01560b0. Ignoring ksyms_base entry
|
| >>EIP; c02a925b <vsnprintf+20b/420> <=====
| Trace; c02a94a6 <vsprintf+16/20>
| Trace; c02a94c4 <sprintf+14/20>
| Trace; c011dcfb <do_resource_list+4b/80>
| Trace; c011dd1b <do_resource_list+6b/80>
| Trace; c011dd72 <get_resource_list+42/60>
| Trace; c0154eae <ioports_read_proc+2e/60>
| Trace; c0152a3e <proc_file_read+ce/190>
| Trace; c01368f6 <sys_read+96/d0>
| Trace; c0127caa <sys_brk+ba/f0>
| Trace; c010712b <system_call+33/38>
| Code; c02a925b <vsnprintf+20b/420>
| 00000000 <_EIP>:
| Code; c02a925b <vsnprintf+20b/420> <=====
| 0: 80 38 00 cmpb $0x0,(%eax) <=====
| Code; c02a925e <vsnprintf+20e/420>
| 3: 74 07 je c <_EIP+0xc> c02a9267 <vsnprintf+217/420>
| Code; c02a9260 <vsnprintf+210/420>
| 5: 40 inc %eax
| Code; c02a9261 <vsnprintf+211/420>
| 6: 4a dec %edx
| Code; c02a9262 <vsnprintf+212/420>
| 7: 83 fa ff cmp $0xffffffff,%edx
| Code; c02a9265 <vsnprintf+215/420>
| a: 75 f4 jne 0 <_EIP>
| Code; c02a9267 <vsnprintf+217/420>
| c: 29 c8 sub %ecx,%eax
| Code; c02a9269 <vsnprintf+219/420>
| e: f6 04 24 10 testb $0x10,(%esp,1)
| Code; c02a926d <vsnprintf+21d/420>
| 12: 89 c6 mov %eax,%esi
Hm, strnlen() in vsnprintf() already has a negative length to work
with (0xfffffffe), then it would inc %eax and dec %edx if it ever
got that far.
I suspect that it's a caller problem -- one that we could paste
over/hide in vsnprintf(), but then we would never find the
real problem (but your system wouldn't die either).
| [6.] A small shell script or example program which triggers the
| problem (if possible)
|
| cat /proc/ioports
|
|
| [7.3.] Module information (from /proc/modules):
|
| cyclades 147616 16 (autoclean)
| eepro100 16960 1 (autoclean)
Have you noticed if the oops happens if these modules are not
loaded?
| [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
|
| I can't add this :( It causes the oops.
Did you try /proc/iomem also ?
| [X.] Other notes, patches, fixes, workarounds:
|
| I've had it with 2.4.12, 2.4.12-ac, and 2.4.14. I've tested the RAM
| with memtest86, and memtest, and haven't found a problem yet. Oddly
| enough I can run "cat /proc/ioports" right after the machine boots, but
| not after its done some work. The address listed in "Cannot handle
| kernel paging request" is always the same. Workaround: don't do that.
--
~Randy
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: {multiple} Kernel Oops on cat /proc/ioports
2001-12-11 12:29 PROBLEM: Kernel Oops on cat /proc/ioports Berend De Schouwer
2001-12-12 0:22 ` Randy.Dunlap
@ 2001-12-12 0:31 ` Randy.Dunlap
2001-12-12 1:06 ` PROBLEM: " Andrew Morton
2001-12-12 1:25 ` Andrew Morton
3 siblings, 0 replies; 9+ messages in thread
From: Randy.Dunlap @ 2001-12-12 0:31 UTC (permalink / raw)
To: Berend De Schouwer; +Cc: linux-kernel
On 11 Dec 2001, Berend De Schouwer wrote:
| [1.] One line summary of the problem:
|
| Running "cat /proc/ioports" causes a segfault and kernel oops.
| >>EIP; c02a925b <vsnprintf+20b/420> <=====
| Trace; c02a94a6 <vsprintf+16/20>
| Trace; c02a94c4 <sprintf+14/20>
| Trace; c011dcfb <do_resource_list+4b/80>
| Trace; c011dd1b <do_resource_list+6b/80>
| Trace; c011dd72 <get_resource_list+42/60>
| Trace; c0154eae <ioports_read_proc+2e/60>
| Trace; c0152a3e <proc_file_read+ce/190>
| Trace; c01368f6 <sys_read+96/d0>
| Trace; c0127caa <sys_brk+ba/f0>
| Trace; c010712b <system_call+33/38>
| Code; c02a925b <vsnprintf+20b/420>
| 00000000 <_EIP>:
| Code; c02a925b <vsnprintf+20b/420> <=====
| 0: 80 38 00 cmpb $0x0,(%eax) <=====
| Code; c02a925e <vsnprintf+20e/420>
| 3: 74 07 je c <_EIP+0xc> c02a9267 <vsnprintf+217/420>
| Code; c02a9260 <vsnprintf+210/420>
| 5: 40 inc %eax
| Code; c02a9261 <vsnprintf+211/420>
| 6: 4a dec %edx
| Code; c02a9262 <vsnprintf+212/420>
| 7: 83 fa ff cmp $0xffffffff,%edx
| Code; c02a9265 <vsnprintf+215/420>
| a: 75 f4 jne 0 <_EIP>
| Code; c02a9267 <vsnprintf+217/420>
| c: 29 c8 sub %ecx,%eax
| Code; c02a9269 <vsnprintf+219/420>
| e: f6 04 24 10 testb $0x10,(%esp,1)
| Code; c02a926d <vsnprintf+21d/420>
| 12: 89 c6 mov %eax,%esi
There have been 3 reports of Oops in vsnprintf() recently [more
precisely, in inline strnlen() ]:
http://marc.theaimsgroup.com/?l=linux-kernel&m=100277148326190&w=2
printing /proc/ioports
http://marc.theaimsgroup.com/?l=linux-kernel&m=100680451811435&w=2
usb device connect/disconnect
http://marc.theaimsgroup.com/?l=linux-kernel&m=100807421108830&w=2
printing /proc/ioports
It would be easy to paste over the problem in vsnprintf(), but
they indicate to me that something else is screwy.
--
~Randy
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-11 12:29 PROBLEM: Kernel Oops on cat /proc/ioports Berend De Schouwer
2001-12-12 0:22 ` Randy.Dunlap
2001-12-12 0:31 ` {multiple} " Randy.Dunlap
@ 2001-12-12 1:06 ` Andrew Morton
2001-12-12 2:57 ` Matt
2001-12-12 10:30 ` Berend De Schouwer
2001-12-12 1:25 ` Andrew Morton
3 siblings, 2 replies; 9+ messages in thread
From: Andrew Morton @ 2001-12-12 1:06 UTC (permalink / raw)
To: Berend De Schouwer; +Cc: linux-kernel
Berend De Schouwer wrote:
>
> [1.] One line summary of the problem:
>
> Running "cat /proc/ioports" causes a segfault and kernel oops.
>
> ...
> [7.3.] Module information (from /proc/modules):
>
> cyclades 147616 16 (autoclean)
cyclades does request_region(), but forgets to do release_region().
This will leave the region allocated in kernel data structures,
but its "name" field resides in module memory.
So if you load cyclades.o, then rmmod it, then cat /proc/ioports,
you'll touch unmapped memory and go boom.
Some brave soul needs to teach cyclades about release_region().
Shame the Nobel prizes are all gone this year.
-
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-12 1:06 ` PROBLEM: " Andrew Morton
@ 2001-12-12 2:57 ` Matt
2001-12-12 3:10 ` Andrew Morton
2001-12-12 10:30 ` Berend De Schouwer
1 sibling, 1 reply; 9+ messages in thread
From: Matt @ 2001-12-12 2:57 UTC (permalink / raw)
To: Andrew Morton; +Cc: Berend De Schouwer, linux-kernel
On Tue, Dec 11, 2001 at 05:06:57PM -0800, Andrew Morton wrote:
> Berend De Schouwer wrote:
>> [1.] One line summary of the problem:
>> Running "cat /proc/ioports" causes a segfault and kernel oops.
>> ...
>> [7.3.] Module information (from /proc/modules):
>> cyclades 147616 16 (autoclean)
> cyclades does request_region(), but forgets to do release_region().
> This will leave the region allocated in kernel data structures, but
> its "name" field resides in module memory.
> So if you load cyclades.o, then rmmod it, then cat /proc/ioports,
> you'll touch unmapped memory and go boom.
> Some brave soul needs to teach cyclades about release_region().
> Shame the Nobel prizes are all gone this year.
speaking of living in module memory, a similar thing happens with the
via-rhine driver. after my machine has been up for a few hours the
"via-rhine" string in /proc/iomem and /proc/ioports gets over written
and prints garbage. since this has never been the cause for an oops on
my machine i never bothered reporting it. if anyone wants details i'll
provide.
matt
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-12 2:57 ` Matt
@ 2001-12-12 3:10 ` Andrew Morton
2001-12-12 3:25 ` Matt
0 siblings, 1 reply; 9+ messages in thread
From: Andrew Morton @ 2001-12-12 3:10 UTC (permalink / raw)
To: Matt; +Cc: Berend De Schouwer, linux-kernel
Matt wrote:
>
> speaking of living in module memory, a similar thing happens with the
> via-rhine driver. after my machine has been up for a few hours the
> "via-rhine" string in /proc/iomem and /proc/ioports gets over written
> and prints garbage. since this has never been the cause for an oops on
> my machine i never bothered reporting it. if anyone wants details i'll
> provide.
>
I think it _could_ oops. Would it be correct to assume that
you're linking the driver into the kernel, rather than using it
as a module?
--- linux-2.4.17-pre8/drivers/net/via-rhine.c Mon Dec 10 13:46:21 2001
+++ linux-akpm/drivers/net/via-rhine.c Tue Dec 11 19:08:17 2001
@@ -161,7 +161,7 @@ static char version[] __devinitdata =
KERN_INFO "via-rhine.c:v1.10-LK1.1.12 03/11/2001 Written by Donald Becker\n"
KERN_INFO " http://www.scyld.com/network/via-rhine.html\n";
-static char shortname[] __devinitdata = "via-rhine";
+static char shortname[] = "via-rhine";
/* This driver was written to use PCI memory space, however most versions
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-12 3:10 ` Andrew Morton
@ 2001-12-12 3:25 ` Matt
0 siblings, 0 replies; 9+ messages in thread
From: Matt @ 2001-12-12 3:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: Berend De Schouwer, linux-kernel
On Tue, Dec 11, 2001 at 07:10:07PM -0800, Andrew Morton wrote:
> Matt wrote:
>> speaking of living in module memory, a similar thing happens with
>> the via-rhine driver. after my machine has been up for a few hours
>> the "via-rhine" string in /proc/iomem and /proc/ioports gets over
>> written and prints garbage. since this has never been the cause for
>> an oops on my machine i never bothered reporting it. if anyone
>> wants details i'll provide.
> I think it _could_ oops. Would it be correct to assume that you're
> linking the driver into the kernel, rather than using it as a
> module?
you are most correct, it is directly linked. i'll give it a burl. i
assume you are going to submit this to donald/jeff and marcelo?
matt
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-12 1:06 ` PROBLEM: " Andrew Morton
2001-12-12 2:57 ` Matt
@ 2001-12-12 10:30 ` Berend De Schouwer
1 sibling, 0 replies; 9+ messages in thread
From: Berend De Schouwer @ 2001-12-12 10:30 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Wed, 2001-12-12 at 03:06, Andrew Morton wrote:
> Berend De Schouwer wrote:
> >
> > [1.] One line summary of the problem:
> >
> > Running "cat /proc/ioports" causes a segfault and kernel oops.
> >
> > ...
> > [7.3.] Module information (from /proc/modules):
> >
> > cyclades 147616 16 (autoclean)
>
> cyclades does request_region(), but forgets to do release_region().
> This will leave the region allocated in kernel data structures,
> but its "name" field resides in module memory.
>
> So if you load cyclades.o, then rmmod it, then cat /proc/ioports,
> you'll touch unmapped memory and go boom.
I have confirmed this. rmmod cyclades && cat /proc/ioports causes the
oops (but not necessarily a system crash). I have a applied your patch,
and repeatedly ran insmod cyclades && rmmod cyclades && cat
/proc/ioports without causing the kernel oops.
>
> Some brave soul needs to teach cyclades about release_region().
> Shame the Nobel prizes are all gone this year.
Thanks very much for the patch.
PS. I needed to change the offsets to apply your patch to 2.4.14, but
no logic was changed.
> -
--
Berend De Schouwer
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PROBLEM: Kernel Oops on cat /proc/ioports
2001-12-11 12:29 PROBLEM: Kernel Oops on cat /proc/ioports Berend De Schouwer
` (2 preceding siblings ...)
2001-12-12 1:06 ` PROBLEM: " Andrew Morton
@ 2001-12-12 1:25 ` Andrew Morton
3 siblings, 0 replies; 9+ messages in thread
From: Andrew Morton @ 2001-12-12 1:25 UTC (permalink / raw)
To: Berend De Schouwer; +Cc: linux-kernel
Does this fix it?
--- linux-2.4.17-pre8/include/linux/cyclades.h Fri May 12 11:22:31 2000
+++ linux-akpm/include/linux/cyclades.h Tue Dec 11 17:17:22 2001
@@ -503,6 +503,7 @@ struct ZFW_CTRL {
#endif
/* Per card data structure */
+struct resource;
struct cyclades_card {
unsigned long base_phys;
unsigned long ctl_phys;
@@ -514,6 +515,8 @@ struct cyclades_card {
int nports; /* Number of ports in the card */
int bus_index; /* address shift - 0 for ISA, 1 for PCI */
int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
+ struct resource *resource;
+ unsigned long res_start, res_len;
#ifdef __KERNEL__
spinlock_t card_lock;
#else
--- linux-2.4.17-pre8/drivers/char/cyclades.c Fri Sep 14 14:04:07 2001
+++ linux-akpm/drivers/char/cyclades.c Tue Dec 11 17:23:42 2001
@@ -4965,6 +4965,8 @@ cy_detect_pci(void)
uclong Ze_addr0[NR_CARDS], Ze_addr2[NR_CARDS], ZeIndex = 0;
uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS];
unsigned char Ze_irq[NR_CARDS];
+ struct resource *resource;
+ unsigned long res_start, res_len;
for (i = 0; i < NR_CARDS; i++) {
/* look for a Cyclades card by vendor and device id */
@@ -5012,7 +5014,15 @@ cy_detect_pci(void)
/* Although we don't use this I/O region, we should
request it from the kernel anyway, to avoid problems
with other drivers accessing it. */
- request_region(cy_pci_phys1, CyPCI_Yctl, "Cyclom-Y");
+ resource = request_region(cy_pci_phys1,
+ CyPCI_Yctl, "Cyclom-Y");
+ if (resource == NULL) {
+ printk(KERN_ERR "cyclades: failed to allocate IO "
+ "resource at 0x%lx\n", cy_pci_phys1);
+ continue;
+ }
+ res_start = cy_pci_phys1;
+ res_len = CyPCI_Yctl;
#if defined(__alpha__)
if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
@@ -5083,7 +5093,11 @@ cy_detect_pci(void)
cy_card[j].bus_index = 1;
cy_card[j].first_line = cy_next_channel;
cy_card[j].num_chips = cy_pci_nchan/4;
-
+ cy_card[j].resource = resource;
+ cy_card[j].res_start = res_start;
+ cy_card[j].res_len = res_len;
+ resource = NULL; /* For next card */
+
/* enable interrupts in the PCI interface */
plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f;
switch (plx_ver) {
@@ -5162,8 +5176,16 @@ cy_detect_pci(void)
/* Although we don't use this I/O region, we should
request it from the kernel anyway, to avoid problems
with other drivers accessing it. */
- request_region(cy_pci_phys1, CyPCI_Zctl, "Cyclades-Z");
-
+ resource = request_region(cy_pci_phys1,
+ CyPCI_Zctl, "Cyclades-Z");
+ if (resource == NULL) {
+ printk(KERN_ERR "cyclades: failed ot allocate IO resource "
+ "at 0x%lx\n", cy_pci_phys1);
+ continue;
+ }
+ res_start = cy_pci_phys1;
+ res_len = CyPCI_Zctl;
+
if (mailbox == ZE_V1) {
cy_pci_addr2 = (ulong)ioremap(cy_pci_phys2, CyPCI_Ze_win);
if (ZeIndex == NR_CARDS) {
@@ -5261,6 +5283,10 @@ cy_detect_pci(void)
cy_card[j].bus_index = 1;
cy_card[j].first_line = cy_next_channel;
cy_card[j].num_chips = -1;
+ cy_card[j].resource = resource;
+ cy_card[j].res_start = res_start;
+ cy_card[j].res_len = res_len;
+ resource = NULL; /* For next card */
/* print message */
#ifdef CONFIG_CYZ_INTR
@@ -5279,7 +5305,7 @@ cy_detect_pci(void)
printk("%d channels starting from port %d.\n",
cy_pci_nchan,cy_next_channel);
cy_next_channel += cy_pci_nchan;
- }
+ }
}
for (; ZeIndex != 0 && i < NR_CARDS; i++) {
@@ -5787,6 +5813,8 @@ cy_cleanup_module(void)
#endif /* CONFIG_CYZ_INTR */
)
free_irq(cy_card[i].irq, &cy_card[i]);
+ if (cy_card[i].resource)
+ release_region(cy_card[i].res_start, cy_card[i].res_len);
}
}
if (tmp_buf) {
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2001-12-12 10:33 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-12-11 12:29 PROBLEM: Kernel Oops on cat /proc/ioports Berend De Schouwer
2001-12-12 0:22 ` Randy.Dunlap
2001-12-12 0:31 ` {multiple} " Randy.Dunlap
2001-12-12 1:06 ` PROBLEM: " Andrew Morton
2001-12-12 2:57 ` Matt
2001-12-12 3:10 ` Andrew Morton
2001-12-12 3:25 ` Matt
2001-12-12 10:30 ` Berend De Schouwer
2001-12-12 1:25 ` Andrew Morton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox