From: Lionel Bouton <Lionel.Bouton@free.fr>
To: linux-kernel@vger.kernel.org, Andre Hedrick <andre@linux-ide.org>
Subject: Re: [RFC] SIS5513 ATA100 support
Date: Wed, 26 Dec 2001 21:55:31 +0100 [thread overview]
Message-ID: <3C2A3943.9060408@free.fr> (raw)
In-Reply-To: <3C27B02B.7070804@free.fr> <3C28CFEA.1010808@free.fr>
[-- Attachment #1: Type: text/plain, Size: 627 bytes --]
Reads better with attachements.
Hello,
I'm back with new code.
This one doesn't work on my sis735 either :-( but after having
triple-checked my code I don't see why :-((. Time to show the code to
others...
If someone familiar with pci-ide code could just take a quick look...
The goal is only working ata-100 inits. There's code in sis5513.c that
could use a little cleanup but I'll wait working ata-100 inits to work
on that.
You have an edited (commented) diff from original sis5513.c and the real
patch attached.
A complete new sis5513.c is available for more conveniance at :
http://gyver.homeip.net/sis5513.c
LB.
[-- Attachment #2: sis.diff --]
[-- Type: text/plain, Size: 6257 bytes --]
+++ Add a Flag for chips supporting ata-100 +++
#define SIS5513_FLAG_ATA_16 0x00000001
#define SIS5513_FLAG_ATA_33 0x00000002
#define SIS5513_FLAG_ATA_66 0x00000004
+#define SIS5513_FLAG_ATA_100 0x00000008
#define SIS5513_FLAG_LATENCY 0x00000010
+++ Holds the flags of the detected chip +++
+static unsigned int capabilities = 0x00000000;
+
+++ Changed flags in order to reflect capabilities +++
??? Are there some chips supporting ata-100 I missed ???
static const struct {
const char *name;
unsigned short host_id;
{ "SiS540", PCI_DEVICE_ID_SI_540, SIS5513_FLAG_ATA_66, },
{ "SiS620", PCI_DEVICE_ID_SI_620, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS630", PCI_DEVICE_ID_SI_630, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
+ { "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
{ "SiS640", PCI_DEVICE_ID_SI_640, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
+ { "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
{ "SiS5591", PCI_DEVICE_ID_SI_5591, SIS5513_FLAG_ATA_33, },
{ "SiS5597", PCI_DEVICE_ID_SI_5597, SIS5513_FLAG_ATA_33, },
{ "SiS5600", PCI_DEVICE_ID_SI_5600, SIS5513_FLAG_ATA_33, },
+++ PIO timing register layout is different for ata-100 use the new one +++
+ if (capabilities && SIS5513_FLAG_ATA_100) {
+ switch(timing) { /* active recovery
+ v v */
+ case 4: test1 = 0x30|0x01; break;
+ case 3: test1 = 0x30|0x03; break;
+ case 2: test1 = 0x40|0x04; break;
+ case 1: test1 = 0x60|0x07; break;
+ default: break;
+ }
+ pci_write_config_byte(dev, drive_pci, test1);
+ return; /* temporary hack for tests */
+ }
+
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
+++ The masks below were wrong from the beginning +++
* Do a blanket clear of active and recovery timings.
*/
- test1 &= ~0x07;
- test2 &= ~0x0F;
+ test1 &= ~0x0F;
+ test2 &= ~0x07;
+++ UDMA mode timing are set on a different base (10ns instead of 1/2 PCI_CLOCK) +++
+++ and the register layout is different too +++
- switch(speed) {
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ switch(speed) {
+#ifdef CONFIG_BLK_DEV_IDEDMA
+ case XFER_UDMA_5: mask = 0x01; break;
+ case XFER_UDMA_4: mask = 0x02; break;
+ case XFER_UDMA_3: mask = 0x04; break;
+ case XFER_UDMA_2: mask = 0x05; break;
+ case XFER_UDMA_1: mask = 0x07; break;
+ case XFER_UDMA_0: mask = 0x0B; break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_2:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0: break;
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+ case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
+ case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
+ case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
+ case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
+ case XFER_PIO_0:
+ default: return((int) config_chipset_for_pio(drive, 0));
+ }
+ } else {
+ switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA
case XFER_UDMA_5: mask = 0x80; break;
case XFER_UDMA_4: mask = 0x90; break;
@@ -407,10 +450,16 @@
case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0));
+ }
}
+++ Adapt the code to the register layout : 0x80 for UDMA enable +++
+++ doesn't have to use a pci_read_config before as we set the whole register +++
- if (speed > XFER_MW_DMA_2)
- pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
+ if (speed > XFER_MW_DMA_2) {
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ pci_write_config_byte(dev, drive_pci|0x01, 0x80|mask);
+ } else {
+ pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
+ }
+ }
drive->current_speed = speed;
return ((int) ide_config_drive_speed(drive, speed));
@@ -583,6 +632,7 @@
continue;
+++ Here (pci_init_sis5513) we store the capabilities flags +++
+++ used everywhere else to activate ata-100 specific code +++
host_dev = host;
+ capabilities = SiSHostChipInfo[i].flags;
printk(SiSHostChipInfo[i].name);
printk("\n");
if (SiSHostChipInfo[i].flags & SIS5513_FLAG_LATENCY) {
@@ -592,12 +642,22 @@
}
+++ The Compatibility mode bit changed from reg52h bit 2 to reg49h bit 0 +++
if (host_dev) {
- byte reg52h = 0;
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ byte reg49h = 0;
- pci_read_config_byte(dev, 0x52, ®52h);
- if (!(reg52h & 0x04)) {
- /* set IDE controller to operate in Compabitility mode only */
- pci_write_config_byte(dev, 0x52, reg52h|0x04);
+ pci_read_config_byte(dev, 0x49, ®49h);
+ if (!(reg49h & 0x01)) {
+ /* set IDE controller to operate in Compabitility mode only */
+ pci_write_config_byte(dev, 0x49, reg49h|0x01);
+ }
+ } else {
+ byte reg52h = 0;
+
+ pci_read_config_byte(dev, 0x52, ®52h);
+ if (!(reg52h & 0x04)) {
+ /* set IDE controller to operate in Compabitility mode only */
+ pci_write_config_byte(dev, 0x52, reg52h|0x04);
+ }
}
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
if (!sis_proc) {
[-- Attachment #3: sis.patch2 --]
[-- Type: text/plain, Size: 6571 bytes --]
--- /usr/src/linux/drivers/ide/sis5513.c Fri Sep 7 18:28:38 2001
+++ sis5513.c Wed Dec 26 21:35:10 2001
@@ -37,8 +37,11 @@
#define SIS5513_FLAG_ATA_16 0x00000001
#define SIS5513_FLAG_ATA_33 0x00000002
#define SIS5513_FLAG_ATA_66 0x00000004
+#define SIS5513_FLAG_ATA_100 0x00000008
#define SIS5513_FLAG_LATENCY 0x00000010
+static unsigned int capabilities = 0x00000000;
+
static const struct {
const char *name;
unsigned short host_id;
@@ -48,15 +51,15 @@
{ "SiS540", PCI_DEVICE_ID_SI_540, SIS5513_FLAG_ATA_66, },
{ "SiS620", PCI_DEVICE_ID_SI_620, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS630", PCI_DEVICE_ID_SI_630, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
+ { "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
{ "SiS640", PCI_DEVICE_ID_SI_640, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
+ { "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
{ "SiS5591", PCI_DEVICE_ID_SI_5591, SIS5513_FLAG_ATA_33, },
{ "SiS5597", PCI_DEVICE_ID_SI_5597, SIS5513_FLAG_ATA_33, },
{ "SiS5600", PCI_DEVICE_ID_SI_5600, SIS5513_FLAG_ATA_33, },
@@ -229,6 +232,7 @@
byte sis_proc = 0;
extern char *ide_xfer_verbose (byte xfer_rate);
+/* Enables Prefetch and Postwrite on drive */
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -245,6 +249,7 @@
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
}
+/* Set active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -291,6 +296,19 @@
default: return;
}
+ if (capabilities && SIS5513_FLAG_ATA_100) {
+ switch(timing) { /* active recovery
+ v v */
+ case 4: test1 = 0x30|0x01; break;
+ case 3: test1 = 0x30|0x03; break;
+ case 2: test1 = 0x40|0x04; break;
+ case 1: test1 = 0x60|0x07; break;
+ default: break;
+ }
+ pci_write_config_byte(dev, drive_pci, test1);
+ return; /* temporary hack for tests */
+ }
+
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
@@ -298,8 +316,8 @@
* Do a blanket clear of active and recovery timings.
*/
- test1 &= ~0x07;
- test2 &= ~0x0F;
+ test1 &= ~0x0F;
+ test2 &= ~0x07;
switch(timing) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
@@ -379,6 +397,7 @@
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
+ /* If not an UDMA mode switch off udma bit */
if ((speed <= XFER_MW_DMA_2) && (test2 & 0x80)) {
pci_write_config_byte(dev, drive_pci|0x01, test2 & ~0x80);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
@@ -386,7 +405,31 @@
pci_write_config_byte(dev, drive_pci|0x01, test2 & ~unmask);
}
- switch(speed) {
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ switch(speed) {
+#ifdef CONFIG_BLK_DEV_IDEDMA
+ case XFER_UDMA_5: mask = 0x01; break;
+ case XFER_UDMA_4: mask = 0x02; break;
+ case XFER_UDMA_3: mask = 0x04; break;
+ case XFER_UDMA_2: mask = 0x05; break;
+ case XFER_UDMA_1: mask = 0x07; break;
+ case XFER_UDMA_0: mask = 0x0B; break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_2:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0: break;
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+ case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
+ case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
+ case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
+ case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
+ case XFER_PIO_0:
+ default: return((int) config_chipset_for_pio(drive, 0));
+ }
+ } else {
+ switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA
case XFER_UDMA_5: mask = 0x80; break;
case XFER_UDMA_4: mask = 0x90; break;
@@ -407,10 +450,16 @@
case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0));
+ }
}
- if (speed > XFER_MW_DMA_2)
- pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
+ if (speed > XFER_MW_DMA_2) {
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ pci_write_config_byte(dev, drive_pci|0x01, 0x80|mask);
+ } else {
+ pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
+ }
+ }
drive->current_speed = speed;
return ((int) ide_config_drive_speed(drive, speed));
@@ -583,6 +632,7 @@
continue;
host_dev = host;
+ capabilities = SiSHostChipInfo[i].flags;
printk(SiSHostChipInfo[i].name);
printk("\n");
if (SiSHostChipInfo[i].flags & SIS5513_FLAG_LATENCY) {
@@ -592,12 +642,22 @@
}
if (host_dev) {
- byte reg52h = 0;
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ byte reg49h = 0;
- pci_read_config_byte(dev, 0x52, ®52h);
- if (!(reg52h & 0x04)) {
- /* set IDE controller to operate in Compabitility mode only */
- pci_write_config_byte(dev, 0x52, reg52h|0x04);
+ pci_read_config_byte(dev, 0x49, ®49h);
+ if (!(reg49h & 0x01)) {
+ /* set IDE controller to operate in Compabitility mode only */
+ pci_write_config_byte(dev, 0x49, reg49h|0x01);
+ }
+ } else {
+ byte reg52h = 0;
+
+ pci_read_config_byte(dev, 0x52, ®52h);
+ if (!(reg52h & 0x04)) {
+ /* set IDE controller to operate in Compabitility mode only */
+ pci_write_config_byte(dev, 0x52, reg52h|0x04);
+ }
}
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
if (!sis_proc) {
prev parent reply other threads:[~2001-12-26 20:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-24 22:46 [RFC] SIS5513 ATA100 support Lionel Bouton
2001-12-25 19:13 ` Lionel Bouton
2001-12-26 20:53 ` Lionel Bouton
2001-12-26 20:55 ` Lionel Bouton [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C2A3943.9060408@free.fr \
--to=lionel.bouton@free.fr \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox