Re: IDE Patch (fwd)

Re: IDE Patch (fwd)

[Andre Hedrick]

Greetings Matthew,

Thanks for the feedback, but lkml needs it or it will not be adopted.
I know the driver is stable and effectively perfect in operations.
So I do not understand the total ignore I receive about it.

respectfully

On Tue, 8 Jan 2002, Matthew Hunter wrote:

> On Tue, Jan 08, 2002 at 01:15:38AM -0800, Andre Hedrick <andre@linux-ide.org> wrote:
> > 
> > ---------- Forwarded message ----------
> > Date: Sat, 5 Jan 2002 14:17:00 -0500 (EST)
> > From: Rob Radez <rob@osinvestor.com>
> > To: Andre Hedrick <andre@linux-ide.org>
> > Subject: IDE Patch
> > 
> > Hi,
> > I'm using your ide.2.4.16.12102001 patch with a Promise PDC20269
> > controller and a Maxtor 160GB hard drive on 2.4.17, and I just wanted to
> > tell you that it's working great so far.
> > 
> > Thanks for all the great code,
> > Rob Radez
> 
> Thought I would take the opportunity to ditto this
> privately.  I'm using your IDE patch with 2.4.17, on a system
> with a three-drive RAID5 and a two-drive RAID0.  I gained about 3
> mb/s on two drives individually.  I haven't rebooted to compare
> raid performance (though I know it is faster -- just not by how
> much). 
> 
> It's been rock solid, no stability issues.
> 
> Looks like great work.
> 
> -- 
> Matthew Hunter (matthew@infodancer.org) Linux-2.4.17 on an i686
> GPG Public Key: http://www.infodancer.org/users/matthew/public.txt
> Fingerprint: 0CD5 FE63 0CB3 C996 7FFE  82F7 F9F5 A295 FA92 497C
> Thousands of years ago, cats were worshipped as gods. Cats have
> <never forgotten this.  
> 
> 

Re: IDE Patch (fwd)

[Dan Chen]

[-- Attachment #1: Type: text/plain, Size: 496 bytes --]

On Tue, Jan 08, 2002 at 07:12:14AM -0800, Andre Hedrick wrote:
> Thanks for the feedback, but lkml needs it or it will not be adopted.
> I know the driver is stable and effectively perfect in operations.
> So I do not understand the total ignore I receive about it.

Andre's ide.2.4.16.12102001.patch works great here. I strongly recommend
it be considered for 2.5 if not also for 2.4.

-- 
Dan Chen                 crimsun@email.unc.edu
GPG key:   www.unc.edu/~crimsun/pubkey.gpg.asc

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]

Re: IDE Patch (fwd)

[Marcel J.E. Mol]

the -ac tree had the patch in until at least 2.4.13-ac,
which I run on my laptop because it is the latest kernel
that flushes the ide-drive writecache at shutdown.
Before that I had regular filesystem corruptions...

-Marcel

On Tue, Jan 08, 2002 at 10:27:36AM -0500, Dan Chen wrote:
> On Tue, Jan 08, 2002 at 07:12:14AM -0800, Andre Hedrick wrote:
> > Thanks for the feedback, but lkml needs it or it will not be adopted.
> > I know the driver is stable and effectively perfect in operations.
> > So I do not understand the total ignore I receive about it.
> 
> Andre's ide.2.4.16.12102001.patch works great here. I strongly recommend
> it be considered for 2.5 if not also for 2.4.
> 
> -- 
> Dan Chen                 crimsun@email.unc.edu
> GPG key:   www.unc.edu/~crimsun/pubkey.gpg.asc



-- 
     ======--------         Marcel J.E. Mol                MESA Consulting B.V.
    =======---------        ph. +31-(0)6-54724868          P.O. Box 112
    =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
 They couldn't think of a number,           Linux user 1148  --  counter.li.org
    so they gave me a name!  -- Rupert Hine  --  www.ruperthine.com

Re: IDE Patch (fwd)

[Alan Cox]

> which I run on my laptop because it is the latest kernel
> that flushes the ide-drive writecache at shutdown.
> Before that I had regular filesystem corruptions...

For certain laptops with IBM 2.5" drives its basically
mandatory. Any laptops that needed the Win98 update (or were shipped with
the win98 update) for this.

Current sysvinit/initscripts has a sort of unreliable workaround for this,
which doesn't always help.

Re: IDE Patch (fwd)

[szonyi calin]

 --- Dan Chen <crimsun@email.unc.edu> a écrit : > On
Tue, Jan 08, 2002 at 07:12:14AM -0800, Andre
> Hedrick wrote:
> > Thanks for the feedback, but lkml needs it or it
> will not be adopted.
> > I know the driver is stable and effectively
> perfect in operations.
> > So I do not understand the total ignore I receive
> about it.
> 
> Andre's ide.2.4.16.12102001.patch works great here.
> I strongly recommend
> it be considered for 2.5 if not also for 2.4.
> 

Cyrix486/66 Slackware 8.0 12Megs Ram works great with 
linux 2.4.16 + ide + rml-preemptible_patch.
hard drive is Seagate 6.4Gb 
I have used this combination before and no
problems at all.

> -- 
> Dan Chen                 crimsun@email.unc.edu
> GPG key:   www.unc.edu/~crimsun/pubkey.gpg.asc
> 



=====
--------------------------------------------
                         ,-----.
                       ," ^   ^ ",
                       |  @   @  |
             ----OOOO---------------OOOO----

___________________________________________________________
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Yahoo! Courrier : http://courrier.yahoo.fr

Re: IDE Patch (fwd)

[Alan Cox]

> > So I do not understand the total ignore I receive about it.
> 
> Andre's ide.2.4.16.12102001.patch works great here. I strongly recommend
> it be considered for 2.5 if not also for 2.4.

I wish it were an easy 2.4 one - its the first thing that fixed my HPT370 DMA 
timeouts too.

Re: IDE Patch (fwd)

[Rene Rebe]

I also vote for inclusion in 2.4. It runs on several workstations and
a file-server using Software RAID-5 on 3 IBM IDE disk running EXT3
(formerly ReiserFS - but it's speed sucks on RAID5 IDE devices ??) -
no problems!

From: Andre Hedrick <andre@linux-ide.org>
Subject: Re: IDE Patch (fwd)
Date: Tue, 8 Jan 2002 07:12:14 -0800 (PST)

> 
> Greetings Matthew,
> 
> Thanks for the feedback, but lkml needs it or it will not be adopted.
> I know the driver is stable and effectively perfect in operations.
> So I do not understand the total ignore I receive about it.
> 
> respectfully
> 
> On Tue, 8 Jan 2002, Matthew Hunter wrote:

[...]


k33p h4ck1n6
  René

-- 
René Rebe (Registered Linux user: #248718 <http://counter.li.org>)

eMail:    rene.rebe@gmx.net
          rene@rocklinux.org

Homepage: http://www.tfh-berlin.de/~s712059/index.html

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.

Re: IDE Patch (fwd)

[Andrew Morton]

Rene Rebe wrote:
> 
> I also vote for inclusion in 2.4.

I spent a couple of hours beating the crap out of it,
and none actually came out.  I'd vote for prompt inclusion
in 2.5, and inclusion in 2.4.x-pre1 when it's shown to be
stable.

-

Re: IDE Patch (fwd)

[Oliver Xymoron]

On Tue, 8 Jan 2002, Andrew Morton wrote:

> Rene Rebe wrote:
> >
> > I also vote for inclusion in 2.4.
>
> I spent a couple of hours beating the crap out of it,
> and none actually came out.  I'd vote for prompt inclusion
> in 2.5, and inclusion in 2.4.x-pre1 when it's shown to be
> stable.

I vote for doing the reverse. The 2.4 codebase is the more tested, the 2.5
is a forward-port. Given all the related block changes still settling out
in 2.5, changing IDE might make block layer/IDE issues hard to sort out.
Let's see it in the next 2.4.x-pre1.

-- 
 "Love the dolphins," she advised him. "Write by W.A.S.T.E.."

Re: IDE Patch (fwd)

[Jussi Laako]

Andre Hedrick wrote:
> 
> Thanks for the feedback, but lkml needs it or it will not be adopted.
> I know the driver is stable and effectively perfect in operations.
> So I do not understand the total ignore I receive about it.

Just to avoid overperfectness... ;))

Has anyone succeeded in fixing the sis5513 driver to work with ATA100 chips?
I get heavy disk corruption with SiS730S chipset mobo (ASUS A7S-VM).


Best regards,

	- Jussi Laako

-- 
PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B  39DD A4DE 63EB C216 1E4B
Available at PGP keyservers

Re: IDE Patch SIS ATA100

[Lionel Bouton]

Jussi Laako wrote:

> Andre Hedrick wrote:
> 
>>Thanks for the feedback, but lkml needs it or it will not be adopted.
>>I know the driver is stable and effectively perfect in operations.
>>So I do not understand the total ignore I receive about it.
>>
> 
> Just to avoid overperfectness... ;))
> 
> Has anyone succeeded in fixing the sis5513 driver to work with ATA100 chips?
> I get heavy disk corruption with SiS730S chipset mobo (ASUS A7S-VM).
> 
> 
> Best regards,
> 
> 	- Jussi Laako
> 
> 

I'm on it. Had some intermittent successes and thought to have a correct 
patch until today (one 2002 week with ATA100)...
But I had a bugreport today and same dma problems on my machine after a 
BIOS flashing and a new drive in the system.
Currently in heavy debugging.

PB: chip seems to init itself correctly on extended periods of time on 
my config! Makes testing rather difficult :-(

For example, with the *exact* same code this evening I had:
- a system freeze just after /sbin/init load,
- a crash after ext3 fs errors before init,
- a somewhat working boot (some weird library errors caused "ip" to not 
work),
- a fully functionnal system (no error reported, some file copies, 
reboot with ide=nodma, e2fsck -f -> no error).

If you have a system you can test on without fear of breaking things 
I'll send you patches as soon as they'll work again on my config.
Better if you want to proof-read the code :
http://gyver.homeip.net/sis5513/index.html

LB.

Re: IDE Patch SIS ATA100

[Lionel Bouton]

Lionel Bouton wrote:

> Jussi Laako wrote:
> 
> 
> I'm on it. Had some intermittent successes and thought to have a correct 
> patch until today (one 2002 week with ATA100)...
> But I had a bugreport today and same dma problems on my machine after a 
> BIOS flashing and a new drive in the system.
> Currently in heavy debugging.
> 


Debugging ended. Patch cleaned from debugging code submitted to Andre.
After numerous bug reports and google search I understood that the 
problem is an *hardware* one on my board.


> PB: chip seems to init itself correctly on extended periods of time on 
> my config! Makes testing rather difficult :-(
> 
> For example, with the *exact* same code this evening I had:
> - a system freeze just after /sbin/init load,
> - a crash after ext3 fs errors before init,
> - a somewhat working boot (some weird library errors caused "ip" to not 
> work),
> - a fully functionnal system (no error reported, some file copies, 
> reboot with ide=nodma, e2fsck -f -> no error).
> 


Should have been 100% sure this was an hardware pb at this time. Non 
deterministic behaviour in my code could not have had any other source.

People encountering problems using SIS chipsets should try the driver 
available here:

http://gyver.homeip.net/sis5513/index.html

LB.