OOPS in APM 2.4.18-pre4 with i830MP agpgart

OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Didier Moens]

Dear all,

On november 27th, Nicolas Aspert was so kind as to post a modification 
to agpgart, which catters for detection of the Intel i830MP.

The patch was included in 2.4.18-pre2.

Unfortunately, loading agpgart yields an oops when APM ("apm -s") is 
invoked, both in terminal and in X. APM functions perfectly when agpgart 
is absent.



The APM oops log :


Oops: 0000
CPU:    0
EIP:    0010:[<00000000>]    Not tainted
EFLAGS: 00010246
eax: 00000000   ebx: dde76220   ecx: 00000000   edx: 00000000
esi: 00000003   edi: 00000000   ebp: 00000000   esp: c181bf4c
ds: 0018   es: 0018   ss: 0018
Process kapm-idled (pid: 3, stackpage=c181b000)
Stack: e29d0f06 c0121e00 dde76220 00000000 00000003 dde7623c 00000064 
dde76220
        c0121eb6 dde76220 00000000 00000003 00000002 00000064 00000064 
0008e000
        c0110f0e 00000000 00000003 00000002 c0111183 00000002 c181a000 
c011131b
Call Trace: [<e29d0f06>] [<c0121e00>] [<c0121eb6>] [<c0110f0e>] [<c0111183>]
    [<c011131b>] [<c0111bfa>] [<c0140018>] [<c0105000>] [<c0105726>] 
[<c01119a0>]

Code:  Bad EIP value.
  Jan 18 10:06:01 localhost kernel: Unable to handle kernel NULL pointer 
dereference at virtual address 00000000
Jan 18 10:06:01 localhost kernel:  printing eip:
Jan 18 10:06:01 localhost kernel: 00000000
Jan 18 10:06:01 localhost kernel: *pde = 00000000
Jan 18 10:06:01 localhost kernel: Oops: 0000
Jan 18 10:06:01 localhost kernel: CPU:    0
Jan 18 10:06:01 localhost kernel: EIP:    0010:[<00000000>]    Not tainted
Jan 18 10:06:01 localhost kernel: EFLAGS: 00010246
Jan 18 10:06:01 localhost kernel: eax: 00000000   ebx: dde76220   ecx: 
00000000   edx: 00000000
Jan 18 10:06:01 localhost kernel: esi: 00000003   edi: 00000000   ebp: 
00000000   esp: c181bf4c
Jan 18 10:06:01 localhost kernel: ds: 0018   es: 0018   ss: 0018
Jan 18 10:06:01 localhost kernel: Process kapm-idled (pid: 3, 
stackpage=c181b000)
Jan 18 10:06:01 localhost kernel: Stack: e29d0f06 c0121e00 dde76220 
00000000 00000003 dde7623c 00000064 dde76220
Jan 18 10:06:01 localhost kernel:        c0121eb6 dde76220 00000000 
00000003 00000002 00000064 00000064 0008e000
Jan 18 10:06:01 localhost kernel:        c0110f0e 00000000 00000003 
00000002 c0111183 00000002 c181a000 c011131b
Jan 18 10:06:01 localhost kernel: Call Trace: [<e29d0f06>] 
[pm_send+64/112] [pm_send_all+70/160] [send_event+30/112] 
[check_events+259/416]
Jan 18 10:06:01 localhost kernel: Call Trace: [<e29d0f06>] [<c0121e00>] 
[<c0121eb6>] [<c0110f0e>] [<c0111183>]
Jan 18 10:06:01 localhost kernel:    [apm_mainloop+123/176] 
[apm+602/624] [posix_lock_file+264/1376] [_stext+0/48] 
[kernel_thread+38/48] [apm+0/624]
Jan 18 10:06:01 localhost kernel:    [<c011131b>] [<c0111bfa>] 
[<c0140018>] [<c0105000>] [<c0105726>] [<c01119a0>]
Jan 18 10:06:01 localhost kernel:
Jan 18 10:06:01 localhost kernel: Code:  Bad EIP value.



Sincerely,


Didier Moens
-----
RUG/VIB - Dept. Molecular Biomedical Research - Core IT
tel ++32(9)2645309 fax ++32(9)2645348
http://www.dmb.rug.ac.be

Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Alan Cox]

> Unfortunately, loading agpgart yields an oops when APM ("apm -s") is 
> invoked, both in terminal and in X. APM functions perfectly when agpgart 
> is absent.

Looks like the author forgot to set the suspend/resume methods in the
structure to the generic ones

Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Nicolas Aspert]

Alan Cox wrote:
> 
> > Unfortunately, loading agpgart yields an oops when APM ("apm -s") is
> > invoked, both in terminal and in X. APM functions perfectly when agpgart
> > is absent.
> 
> Looks like the author forgot to set the suspend/resume methods in the
> structure to the generic ones

Aargh... stupid me !! Well, I told Marcelo that I was not feeling too
good the day I submitted the patch :-) And  I just saw myself that the
netry was missing in the intel_820 stuff also (duh !)
The origin of the problem is that I happen to have an old kernel at home
(RH 7.1 2.4.2) that has no suspend/resume stuff, and this was where I
wrote the original patch, and the rest propagated through the usual
copy/paste way.
I correctly updated a part of the stuff but it's missing in other
places, and since I don't use APM, the problem did not show up. 
However, I am out of fast connection, so I am unable to make a patch
right now. 
If nobody has made it by monday, I'll send the patch

Best regards, and thanks Didier for pointing the problem (and Alan for
*very* quickly seeing what went wrong).

Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Dave Jones]

On Fri, Jan 18, 2002 at 08:25:19PM +0000, Alan Cox wrote:
 > > Unfortunately, loading agpgart yields an oops when APM ("apm -s") is 
 > > invoked, both in terminal and in X. APM functions perfectly when agpgart 
 > > is absent.
 > Looks like the author forgot to set the suspend/resume methods in the
 > structure to the generic ones

   1373 static int __init intel_i830_setup(struct pci_dev *i830_dev)
   1374 {
   1375     intel_i830_private.i830_dev = i830_dev;
   1376     
 ...
   1404     agp_bridge.suspend = agp_generic_suspend;
   1405     agp_bridge.resume = agp_generic_resume;

-- 
| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs

Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Didier Moens]

Dave Jones wrote:

>On Fri, Jan 18, 2002 at 08:25:19PM +0000, Alan Cox wrote:
> > > Unfortunately, loading agpgart yields an oops when APM ("apm -s") is 
> > > invoked, both in terminal and in X. APM functions perfectly when agpgart 
> > > is absent.
> > Looks like the author forgot to set the suspend/resume methods in the
> > structure to the generic ones
>
>   1373 static int __init intel_i830_setup(struct pci_dev *i830_dev)
>   1374 {
>   1375     intel_i830_private.i830_dev = i830_dev;
>   1376     
> ...
>   1404     agp_bridge.suspend = agp_generic_suspend;
>   1405     agp_bridge.resume = agp_generic_resume;
>

I post an oops, 26'51" minutes later it gets diagnosed, and 3'26" after 
that a patch is submitted.


Quite speechless I am indeed.

Didier

Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Nicolas Aspert]

Hello again

Here is a small patch (against 2.4.18-pre2 since I don't have the latest
18-pre at hand) that should fix your the problem. It may not apply
cleanly but that's all I can do at the moment.
Sorry again for my mistake.

Best regards

Nicolas.

--- agpgart_be.c        Fri Jan 18 21:37:43 2002
+++ agpgart_be.c_correct        Fri Jan 18 21:39:02 2002
@@ -1400,7 +1400,6 @@
        agp_bridge.free_by_type = intel_i810_free_by_type;
        agp_bridge.agp_alloc_page = agp_generic_alloc_page;
        agp_bridge.agp_destroy_page = agp_generic_destroy_page;
-
        agp_bridge.suspend = agp_generic_suspend;
        agp_bridge.resume = agp_generic_resume;
        agp_bridge.cant_use_aperture = 0;
@@ -1857,7 +1856,10 @@
        agp_bridge.free_by_type = agp_generic_free_by_type;
        agp_bridge.agp_alloc_page = agp_generic_alloc_page;
        agp_bridge.agp_destroy_page = agp_generic_destroy_page;
-
+       agp_bridge.suspend = agp_generic_suspend;
+       agp_bridge.resume = agp_generic_resume;
+       agp_bridge.cant_use_aperture = 0;
+
        return 0;
 
        (void) pdev; /* unused */
@@ -1887,7 +1889,9 @@
        agp_bridge.free_by_type = agp_generic_free_by_type;
        agp_bridge.agp_alloc_page = agp_generic_alloc_page;
        agp_bridge.agp_destroy_page = agp_generic_destroy_page;
-
+       agp_bridge.suspend = agp_generic_suspend;
+       agp_bridge.resume = agp_generic_resume;
+       agp_bridge.cant_use_aperture = 0;
        return 0;
 
        (void) pdev; /* unused */

[PATCH]Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Nicolas Aspert]

[-- Attachment #1: Type: text/plain, Size: 674 bytes --]

Didier Moens wrote:

> Dear all,
> 
> On november 27th, Nicolas Aspert was so kind as to post a modification 
> to agpgart, which catters for detection of the Intel i830MP.
> 
> The patch was included in 2.4.18-pre2.
> 
> Unfortunately, loading agpgart yields an oops when APM ("apm -s") is 
> invoked, both in terminal and in X. APM functions perfectly when agpgart 
> is absent.
> 
> 
> 

Hello all

Here is a patch that fixes the APM/suspend/resume issues in agpgart (for 
820 and 830MP chipsets).
The patch is against 2.4.18-pre4

Have a nice week-end.


Nicolas

-- 
Nicolas Aspert      Signal Processing Laboratory (LTS)
Swiss Federal Institute of Technology (EPFL)



[-- Attachment #2: patch-agp_suspend_resume-2.4.18-pre4 --]
[-- Type: text/plain, Size: 1108 bytes --]

diff -Nru linux-2.4.18-pre4.clean/drivers/char/agp/agpgart_be.c linux-2.4.18-pre4.dirty/drivers/char/agp/agpgart_be.c
--- linux-2.4.18-pre4.clean/drivers/char/agp/agpgart_be.c	Sat Jan 19 09:35:00 2002
+++ linux-2.4.18-pre4.dirty/drivers/char/agp/agpgart_be.c	Sat Jan 19 09:38:41 2002
@@ -1857,7 +1857,10 @@
        agp_bridge.free_by_type = agp_generic_free_by_type;
        agp_bridge.agp_alloc_page = agp_generic_alloc_page;
        agp_bridge.agp_destroy_page = agp_generic_destroy_page;
-
+       agp_bridge.suspend = agp_generic_suspend;
+       agp_bridge.resume = agp_generic_resume;
+       agp_bridge.cant_use_aperture = 0;
+       
        return 0;
 
        (void) pdev; /* unused */
@@ -1887,7 +1890,10 @@
        agp_bridge.free_by_type = agp_generic_free_by_type;
        agp_bridge.agp_alloc_page = agp_generic_alloc_page;
        agp_bridge.agp_destroy_page = agp_generic_destroy_page;
-
+       agp_bridge.suspend = agp_generic_suspend;
+       agp_bridge.resume = agp_generic_resume;
+       agp_bridge.cant_use_aperture = 0;
+       
        return 0;
 
        (void) pdev; /* unused */

Re: [PATCH]Re: OOPS in APM 2.4.18-pre4 with i830MP agpgart

[Didier Moens]

Nicolas Aspert wrote:

> Didier Moens wrote:
>
>> Dear all,
>>
>> On november 27th, Nicolas Aspert was so kind as to post a 
>> modification to agpgart, which catters for detection of the Intel 
>> i830MP.
>>
>> The patch was included in 2.4.18-pre2.
>>
>> Unfortunately, loading agpgart yields an oops when APM ("apm -s") is 
>> invoked, both in terminal and in X. APM functions perfectly when 
>> agpgart is absent.
>>
>>
>>
>
> Hello all
>
> Here is a patch that fixes the APM/suspend/resume issues in agpgart 
> (for 820 and 830MP chipsets).
> The patch is against 2.4.18-pre4
>
> Have a nice week-end. 


Patch functions OK for me (patch applied to 2.4.18-pre4) : I can enter 
and resume from APM with agpgart loaded.



Unfortunately, since moving from RedHat Rawhide 2.4.16-0.9 to vanilla 
2.4.18-pre4, I'm regularly confronted with the "ide_dmaproc : chipset 
supported ide_dma_lostirq func only : 13"-error when resuming from APM 
(see lkml-thread "DMA woes", 2001-12-07, with interventions from Andre 
Hedrick), but I verified this is unrelated to the presence of the 
agpgart module.


Sincerely,

Didier