* Re: Re : Sharing Interrupt+HPT366 Problem on BP6
[not found] <3C4C5022.EEEAEF3@gemplus.com>
@ 2002-01-22 3:33 ` Anton Tinchev
0 siblings, 0 replies; only message in thread
From: Anton Tinchev @ 2002-01-22 3:33 UTC (permalink / raw)
To: costefl
I use Software RAID level 5
Florent Coste wrote:
> Look at http://www.csie.ntu.edu.tw/~b6506063/hpt366/ "both HPT366
> channels share the same IRQ, so you might want to try that suppose you
> are tight on high IRQs"
>
> I'have a BP6 too, and i'm about to use the HPT366 (bought a fast drive),
> and i have a question :
> do you use Software RAID (provided by the kernel ?)
>
> Or HPT366 to HPT368 bios flashing wich make RAID 0,1 available ?
> (as explained in http://www.tweakhardware.com/guide/hpt366/ )
>
> But let me be clear : i don't know if it works on the HPT366 provided on
> the BP6 since the previous article speaks about off board hpt366
> controllers.
>
> Florent
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-01-21 17:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <3C4C5022.EEEAEF3@gemplus.com>
2002-01-22 3:33 ` Re : Sharing Interrupt+HPT366 Problem on BP6 Anton Tinchev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox