From: Andrew Morton <akpm@zip.com.au>
To: James Simmons <jsimmons@transvirtual.com>
Cc: Daniel Jacobowitz <dan@debian.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andrea Arcangeli <andrea@suse.de>,
Linux Frame Buffer Device Development
<linux-fbdev-devel@lists.sourceforge.net>,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: Re: [Linux-fbdev-devel] Re: [PATCH?] Crash in 2.4.17/ptrace
Date: Tue, 29 Jan 2002 15:02:56 -0800 [thread overview]
Message-ID: <3C572A20.F55DED87@zip.com.au> (raw)
In-Reply-To: <3C55CCE0.30189523@zip.com.au> <Pine.LNX.4.10.10201291453250.29648-100000@www.transvirtual.com>
James Simmons wrote:
>
> > It marks all framebuffer mappings as VM_IO. This prevents
> > kernel deadlocks which can occur when a program which
> > has a framebuffer mapping attempts to dump core.
>
> Good this is needed.
>
> > I've Cc'ed linux-fbdev-devel. Could someone please
> > review?
>
> > --- linux-2.4.18-pre7/drivers/video/acornfb.c Thu Nov 22 23:02:58 2001
>
> You missed the atyfb driver. Other then that it looks fine. Geert what do
> you think?
Ah, thanks. Also I missed sbusfb.c (not that it was fatal - the driver
got it right anyway).
Here's the current patch. After some discussion with Ben
Herrenschmidt, it now sets VM_IO against the vma *before*
calling the subdriver's mmap method, just in case the
driver really does want to clear that flag (presumably, a shadow
buffer in main memory).
--- linux-2.4.18-pre7/drivers/video/acornfb.c Thu Nov 22 23:02:58 2001
+++ linux-akpm/drivers/video/acornfb.c Tue Jan 29 14:57:00 2002
@@ -1139,9 +1139,6 @@ acornfb_mmap(struct fb_info *info, struc
off += start;
vma->vm_pgoff = off >> PAGE_SHIFT;
- /* This is an IO map - tell maydump to skip this VMA */
- vma->vm_flags |= VM_IO;
-
#ifdef CONFIG_CPU_32
pgprot_val(vma->vm_page_prot) &= ~L_PTE_CACHEABLE;
#endif
--- linux-2.4.18-pre7/drivers/video/igafb.c Thu Nov 22 23:02:58 2001
+++ linux-akpm/drivers/video/igafb.c Tue Jan 29 14:57:00 2002
@@ -293,8 +293,6 @@ static int igafb_mmap(struct fb_info *in
if (!map_size)
return -EINVAL;
- vma->vm_flags |= VM_IO;
-
if (!fb->mmaped) {
int lastconsole = 0;
--- linux-2.4.18-pre7/drivers/video/sgivwfb.c Thu Nov 22 23:02:58 2001
+++ linux-akpm/drivers/video/sgivwfb.c Tue Jan 29 14:57:00 2002
@@ -846,7 +846,6 @@ static int sgivwfb_mmap(struct fb_info *
return -EINVAL;
offset += sgivwfb_mem_phys;
pgprot_val(vma->vm_page_prot) = pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
- vma->vm_flags |= VM_IO;
if (remap_page_range(vma->vm_start, offset, size, vma->vm_page_prot))
return -EAGAIN;
vma->vm_file = file;
--- linux-2.4.18-pre7/drivers/video/fbmem.c Fri Dec 21 11:19:14 2001
+++ linux-akpm/drivers/video/fbmem.c Tue Jan 29 14:57:00 2002
@@ -541,6 +541,16 @@ fb_mmap(struct file *file, struct vm_are
if (fb->fb_mmap) {
int res;
lock_kernel();
+ /*
+ * This is an IO map - tell maydump to skip this VMA.
+ * If, for some reason, the sub-driver wishes to allow the
+ * mapping to be dumpable and accessible via ptrace then
+ * it may clear VM_IO later.
+ * (This only makes sense if the buffer is actually
+ * in main memory, and is described by a page struct in
+ * mem_map[])
+ */
+ vma->vm_flags |= VM_IO;
res = fb->fb_mmap(info, file, vma);
unlock_kernel();
return res;
@@ -576,12 +586,13 @@ fb_mmap(struct file *file, struct vm_are
return -EINVAL;
off += start;
vma->vm_pgoff = off >> PAGE_SHIFT;
+ /* This is an IO map - tell maydump to skip this VMA */
+ vma->vm_flags |= VM_IO;
#if defined(__sparc_v9__)
vma->vm_flags |= (VM_SHM | VM_LOCKED);
if (io_remap_page_range(vma->vm_start, off,
vma->vm_end - vma->vm_start, vma->vm_page_prot, 0))
return -EAGAIN;
- vma->vm_flags |= VM_IO;
#else
#if defined(__mc68000__)
#if defined(CONFIG_SUN3)
@@ -607,8 +618,6 @@ fb_mmap(struct file *file, struct vm_are
pgprot_val(vma->vm_page_prot) |= _CACHE_UNCACHED;
#elif defined(__arm__)
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- /* This is an IO map - tell maydump to skip this VMA */
- vma->vm_flags |= VM_IO;
#elif defined(__sh__)
pgprot_val(vma->vm_page_prot) &= ~_PAGE_CACHABLE;
#else
--- linux-2.4.18-pre7/drivers/video/sbusfb.c Thu Sep 13 16:04:43 2001
+++ linux-akpm/drivers/video/sbusfb.c Tue Jan 29 14:58:59 2002
@@ -220,7 +220,6 @@ static int sbusfb_mmap(struct fb_info *i
page += map_size;
}
- vma->vm_flags |= VM_IO;
if (!fb->mmaped) {
int lastconsole = 0;
--- linux-2.4.18-pre7/drivers/video/aty/atyfb_base.c Wed Jan 23 15:11:34 2002
+++ linux-akpm/drivers/video/aty/atyfb_base.c Tue Jan 29 14:56:46 2002
@@ -1426,8 +1426,6 @@ static int atyfb_mmap(struct fb_info *in
if (!map_size)
return -EINVAL;
- vma->vm_flags |= VM_IO;
-
if (!fb->mmaped) {
int lastconsole = 0;
next prev parent reply other threads:[~2002-01-29 23:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-28 20:32 [PATCH?] Crash in 2.4.17/ptrace Daniel Jacobowitz
2002-01-28 21:03 ` Andrew Morton
2002-01-28 21:19 ` Daniel Jacobowitz
2002-01-28 21:29 ` Andrew Morton
2002-01-28 21:55 ` Alan Cox
2002-01-28 22:12 ` Andrew Morton
2002-01-29 22:59 ` [Linux-fbdev-devel] " James Simmons
2002-01-29 23:02 ` Andrew Morton [this message]
2002-01-30 0:13 ` James Simmons
2002-01-28 22:15 ` Benjamin Herrenschmidt
2002-01-28 23:57 ` Andrea Arcangeli
2002-01-28 23:54 ` Andrea Arcangeli
2002-01-29 5:35 ` Andrew Morton
2002-01-28 23:47 ` Andrea Arcangeli
2002-01-28 21:42 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C572A20.F55DED87@zip.com.au \
--to=akpm@zip.com.au \
--cc=andrea@suse.de \
--cc=dan@debian.org \
--cc=geert@linux-m68k.org \
--cc=jsimmons@transvirtual.com \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox