serial console in single mode does not function

serial console in single mode does not function

[Andrejs Dubovskis]

When system with serial console is started in single mode it boots
shell. But any button pressed in terminal does not go to console.
Looks like hanged system. Nothing changed but kernel (2.4.14) only
and serial console works as expected: any pressed chars are displayed
in console.
Kernels 2.4.17 and 2.4.18 was checked and do not function.
Systems are Alpha Avanti and Alpha Miata (some info provided below).

[andrejs@host linux]$ cat /proc/version
Linux version 2.4.17 (andrejs@host) (gcc version 2.96 20000731
(Red Hat Linux 7.0)) #1 Wed Jan 2 09:37:16 EET 2002

[andrejs@host linux]$ cat /proc/cpuinfo 
cpu                     : Alpha
cpu model               : EV56
cpu variation           : 7
cpu revision            : 0
cpu serial number       : 
system type             : Miata
system variation        : 0
system revision         : 0
system serial number    : 
cycle frequency [Hz]    : 499747351 est.
timer frequency [Hz]    : 1024.00
page size [bytes]       : 8192
phys. address bits      : 40
max. addr. space #      : 127
BogoMIPS                : 992.88
kernel unaligned acc    : 0 (pc=0,va=0)
user unaligned acc      : 12 (pc=1200027e8,va=20000284712)
platform string         : Digital Personal WorkStation 500au
cpus detected           : 1

[andrejs@host linux]$ cat /etc/aboot.conf 
1:1/boot/vmlinuz-2.4.17 root=/dev/sda1 ro console=ttyS0 single

[andrejs@host linux]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-0080 : rtc
  0070-007f : rtc
00a0-00bf : pic2
00c0-00df : dma2
0170-0177 : ide1
02f8-02ff : serial(auto)
0376-0376 : ide1
03f8-03ff : serial(auto)
8000-807f : Digital Equipment Corporation DECchip 21142/43
  8000-807f : tulip
8080-808f : Contaq Microsystems 82c693 (#2)
  8080-8087 : ide0
  8088-808f : ide1
9000-90fe : qlogicisp

Re: serial console in single mode does not function

[Miquel van Smoorenburg]

In article <3C7E6A84.DED890F6@lmt.lv>,
Andrejs Dubovskis  <adu@lmt.lv> wrote:
>When system with serial console is started in single mode it boots
>shell. But any button pressed in terminal does not go to console.
>Looks like hanged system. Nothing changed but kernel (2.4.14) only
>and serial console works as expected: any pressed chars are displayed
>in console.
>Kernels 2.4.17 and 2.4.18 was checked and do not function.

Update your sysvinit package.

Mike.
-- 
Computers are useless, they only give answers. --Pablo Picasso

Re: serial console in single mode does not function

[Craig]

I had the exact same problem on an earlier thread moving from 2.4.10 to 2.4.17.
Updating the /sbin/init to a newer version (from sysvinit package) fixed my
problems and made my serial console work in 2.4.17.

Good luck.

--
Craig.

On Thu, 28 Feb 2002, Andrejs Dubovskis wrote:

> When system with serial console is started in single mode it boots
> shell. But any button pressed in terminal does not go to console.
> Looks like hanged system. Nothing changed but kernel (2.4.14) only
> and serial console works as expected: any pressed chars are displayed
> in console.
> Kernels 2.4.17 and 2.4.18 was checked and do not function.
> Systems are Alpha Avanti and Alpha Miata (some info provided below).
>
> [andrejs@host linux]$ cat /proc/version
> Linux version 2.4.17 (andrejs@host) (gcc version 2.96 20000731
> (Red Hat Linux 7.0)) #1 Wed Jan 2 09:37:16 EET 2002
>
> [andrejs@host linux]$ cat /proc/cpuinfo
> cpu                     : Alpha
> cpu model               : EV56
> cpu variation           : 7
> cpu revision            : 0
> cpu serial number       :
> system type             : Miata
> system variation        : 0
> system revision         : 0
> system serial number    :
> cycle frequency [Hz]    : 499747351 est.
> timer frequency [Hz]    : 1024.00
> page size [bytes]       : 8192
> phys. address bits      : 40
> max. addr. space #      : 127
> BogoMIPS                : 992.88
> kernel unaligned acc    : 0 (pc=0,va=0)
> user unaligned acc      : 12 (pc=1200027e8,va=20000284712)
> platform string         : Digital Personal WorkStation 500au
> cpus detected           : 1
>
> [andrejs@host linux]$ cat /etc/aboot.conf
> 1:1/boot/vmlinuz-2.4.17 root=/dev/sda1 ro console=ttyS0 single
>
> [andrejs@host linux]$ cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-0080 : rtc
>   0070-007f : rtc
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 0170-0177 : ide1
> 02f8-02ff : serial(auto)
> 0376-0376 : ide1
> 03f8-03ff : serial(auto)
> 8000-807f : Digital Equipment Corporation DECchip 21142/43
>   8000-807f : tulip
> 8080-808f : Contaq Microsystems 82c693 (#2)
>   8080-8087 : ide0
>   8088-808f : ide1
> 9000-90fe : qlogicisp
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

--
Craig.
+------------------------------------------------------+
http://www.wombat.ca               Why? Why not.
http://www.washington.edu/pine/    Pine @ the U of Wash.
+-------------=*sent via Pine4.42*=--------------------+