From: Pierre Rousselet <pierre.rousselet@wanadoo.fr>
To: lkml <linux-kernel@vger.kernel.org>
Subject: 2.5.6-pre3 boot hangs in ide probing
Date: Sat, 09 Mar 2002 09:12:04 +0100 [thread overview]
Message-ID: <3C89C3D4.3070004@wanadoo.fr> (raw)
The motherboard is abit BE6 (4 ide, piix and hpt366) with a pIII coppermine.
For reference below is dmesg with a booting 2.5.6-pre2.
booting 2.5.6-pre3 hangs at :
........
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4
/dev/ide/host3/bus0/target0/lun0:
........
with hdg=noprobe, and even after un-plugging hdg, 2.5.6-pre3 hangs at :
........
ide2 at 0xcc00-0xcc07,0xd002 on irq 11
ide3 at 0xd800-0xd807,0xdc02 on irq 11
blk: queue c0255658, I/O limit 4095Mb (mask 0xffffffff)
........
(2.5.6-pre2)# dmesg
........
Uniform Multi-Platform E-IDE driver ver.:7.0.0
ide: system bus speed 33MHz
PCI device 8086:7111: IDE controller on PCI slot 00:07.1
PCI device 8086:7111: chipset revision 1
PCI device 8086:7111: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
PCI device 1103:0004: onboard version of chipset, pin1=1 pin2=2
PCI device 1103:0004: IDE controller on PCI slot 00:13.0
PCI: Found IRQ 11 for device 00:13.0
PCI: Sharing IRQ 11 with 00:13.1
PCI device 1103:0004: chipset revision 1
PCI device 1103:0004: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
PCI device 1103:0004: IDE controller on PCI slot 00:13.1
PCI: Found IRQ 11 for device 00:13.1
PCI: Sharing IRQ 11 with 00:13.0
PCI device 1103:0004: chipset revision 1
PCI device 1103:0004: not 100% native mode: will probe irqs later
ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio
hdc: SAMSUNG DVD-ROM SD-616F, ATAPI CD/DVD-ROM drive
hde: ST310212A, ATA DISK drive
hdg: SAMSUNG SV0322A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xcc00-0xcc07,0xd002 on irq 11
ide3 at 0xd800-0xd807,0xdc02 on irq 11
blk: queue c0255658, I/O limit 4095Mb (mask 0xffffffff)
hde: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66)
blk: queue c0255c50, I/O limit 4095Mb (mask 0xffffffff)
hdg: 6250608 sectors (3200 MB) w/478KiB Cache, CHS=11024/9/63, UDMA(33)
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4
/dev/ide/host3/bus0/target0/lun0: p1
.......
Pierre
--
------------------------------------------------
Pierre Rousselet <pierre.rousselet@wanadoo.fr>
------------------------------------------------
next reply other threads:[~2002-03-09 8:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-09 8:12 Pierre Rousselet [this message]
2002-03-09 13:10 ` 2.5.6-pre3 boot hangs in ide probing Martin Dalecki
2002-03-09 14:37 ` Pierre Rousselet
2002-03-09 20:58 ` Martin Dalecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C89C3D4.3070004@wanadoo.fr \
--to=pierre.rousselet@wanadoo.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox