From: "Pedro M. Rodrigues" <pmanuel@myrealbox.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>, Pavel Machek <pavel@suse.cz>
Cc: Pavel Machek <pavel@suse.cz>, Andre Hedrick <andre@linux-ide.org>,
Wakko Warner <wakko@animx.eu.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: IDE and hot-swap disk caddies
Date: Wed, 27 Mar 2002 23:47:38 +0100 [thread overview]
Message-ID: <3CA25A1A.31572.2DCF314@localhost> (raw)
In-Reply-To: <20020327222900.GO19837@atrey.karlin.mff.cuni.cz>
You can. Acard for instance makes devices for that. They plug at
the end of an ide cdrom or harddisk, and interface with scsi. They
have two models, a 20MB/s one, and an UltraWide model that goes
up to 40MB/s. It has a small risc cpu and you can even upgrade their
firmware. A friend of mine ordered one to plug a dvd reader in an
external scsi box he had lying around - he had all his computer drive
bays used. He said it worked fine and didn't notice any performance
hit even when playing dvd's.
/Pedro
On 27 Mar 2002 at 23:29, Pavel Machek wrote:
> I have seen USB mass storage devices with ide connector on them, so it
> is certainly possible to translate between scsi and ide. If it makes
> sense from performance standpoint.... I don't know.
> Pavel
>
next prev parent reply other threads:[~2002-03-27 22:48 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-25 9:32 IDE and hot-swap disk caddies John Summerfield
2002-03-25 15:56 ` Alan Cox
2002-03-25 19:34 ` Bill Davidsen
2002-03-25 19:55 ` Alan Cox
2002-03-25 20:26 ` Wakko Warner
2002-03-25 21:20 ` Andre Hedrick
2002-03-25 22:32 ` Wakko Warner
2002-03-26 0:11 ` Thunder from the hill
2002-03-26 18:52 ` Pavel Machek
2002-03-27 22:38 ` Alan Cox
2002-03-27 22:29 ` Pavel Machek
2002-03-27 22:47 ` Pedro M. Rodrigues [this message]
2002-03-27 23:21 ` Jos Hulzink
2002-03-28 11:37 ` Jos Hulzink
2002-03-27 22:51 ` Alan Cox
2002-03-28 0:01 ` Itai Nahshon
2002-03-28 0:11 ` Andre Hedrick
2002-03-27 23:53 ` Vojtech Pavlik
2002-03-25 23:16 ` John Summerfield
2002-03-26 3:32 ` Mark Lord
2002-03-26 5:28 ` Jeremy Jackson
2002-03-26 8:21 ` DE " jw schultz
2002-03-26 19:01 ` Pavel Machek
2002-03-27 22:34 ` jw schultz
2002-03-27 23:17 ` Jos Hulzink
2002-03-27 23:57 ` Andre Hedrick
2002-03-28 0:17 ` Erik Andersen
2002-03-28 0:23 ` Andre Hedrick
2002-03-28 0:31 ` Benjamin LaHaise
2002-03-28 0:40 ` Andre Hedrick
2002-03-28 2:02 ` IDE " Jeremy Jackson
2002-03-28 9:33 ` Alan Cox
2002-03-28 9:28 ` Simon Richter
2002-03-28 16:25 ` Jeremy Jackson
2002-03-28 9:33 ` DE " Jos Hulzink
2002-03-28 0:37 ` Alan Cox
2002-03-28 0:27 ` Andre Hedrick
2002-03-28 4:24 ` Chuck Campbell
2002-03-28 4:32 ` Andre Hedrick
2002-03-28 8:00 ` Martin Dalecki
2002-03-28 8:21 ` Andre Hedrick
2002-03-28 9:01 ` Martin Dalecki
2002-03-28 9:39 ` Alan Cox
2002-03-28 9:50 ` Offtopic: " Jos Hulzink
2002-03-28 9:53 ` Martin Dalecki
2002-03-28 18:31 ` Herman Oosthuysen
2002-03-28 9:29 ` Jos Hulzink
2002-03-26 22:53 ` IDE " John Summerfield
2002-03-28 16:46 ` Bill Davidsen
2002-03-28 18:10 ` Mark Lord
2002-03-28 20:59 ` John Summerfield
[not found] <Pine.LNX.4.33.0203252353380.25706-100000@coffee.psychology.mcmaster.ca>
2002-03-26 23:59 ` John Summerfield
[not found] <Pine.LNX.4.33.0203271134090.28872-100000@coffee.psychology.mcmaster.ca>
2002-03-31 13:01 ` John Summerfield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CA25A1A.31572.2DCF314@localhost \
--to=pmanuel@myrealbox.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@suse.cz \
--cc=wakko@animx.eu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox