public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Art Wagner <awagner@westek-systems.com>
To: Andre Hedrick <andre@linux-ide.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Jean-Luc Coulon <jean-luc.coulon@wanadoo.fr>,
	linux-kernel@vger.kernel.org
Subject: Re: 2.4.19-pre4-ac[23] do not boot
Date: Fri, 29 Mar 2002 18:51:45 -0700	[thread overview]
Message-ID: <3CA51A31.80405@westek-systems.com> (raw)
In-Reply-To: <Pine.LNX.4.10.10203291313430.10681-100000@master.linux-ide.org>

[-- Attachment #1: Type: text/plain, Size: 1469 bytes --]

Hi;
I seem to have the identical problem with system hangs on boot. The 
problem I see occurs on a Abit BP6
on the first access of the first drive on the HPT-366 interface. The 
problem occurs on all -ac-x revisions
1 through 3.  The attached log is from an boot on 2.4.19-pre4 which did 
not hang but the log is identical
except for the fact that the hang occurs with only the "hde:" portion of 
the last line displayed.
If I can provide any further information pleas let me know via the list 
or direct email.
Art Wagner

Andre Hedrick wrote:

>On Fri, 29 Mar 2002, Alan Cox wrote:
>
>>>This is possible, however one of the problems encountered is the
>>>following under several chipsets.  If there is no pio timing set at all,
>>>then we can run into host lock issues if the driver drops out of dma.
>>>Thus, if it is going to lockup here it would/could lock up in other
>>>places when one trys to program the host for PIO.
>>>
>>Well right at the moment the ALi locks up on boot reliably. That means a
>>fix has to be found, or the ALi changes reverted 
>>
>
>Pull out the GOOF-UP of mine :-/
>
>autotune is enabled and does the same thing, Gurrr....
>
>Cheers,
>
>Andre Hedrick
>LAD Storage Consulting Group
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/
>
>


[-- Attachment #2: boot_hang.log --]
[-- Type: text/plain, Size: 2676 bytes --]

Mar 29 18:32:43 Apollo kernel: PIIX4: not 100%% native mode: will probe irqs later
Mar 29 18:32:43 Apollo kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Mar 29 18:32:43 Apollo kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Mar 29 18:32:43 Apollo xinetd[780]: Service ntalk: missing '{' [line=5]
Mar 29 18:32:43 Apollo kernel: HPT366: onboard version of chipset, pin1=1 pin2=2
Mar 29 18:32:43 Apollo kernel: HPT366: IDE controller on PCI bus 00 dev 98
Mar 29 18:32:43 Apollo kernel: HPT366: chipset revision 1
Mar 29 18:32:43 Apollo kernel: HPT366: not 100%% native mode: will probe irqs later
Mar 29 18:32:43 Apollo kernel:     ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:DMA, hdf:DMA
Mar 29 18:32:43 Apollo kernel: HPT366: IDE controller on PCI bus 00 dev 99
Mar 29 18:32:43 Apollo kernel: HPT366: chipset revision 1
Mar 29 18:32:43 Apollo kernel: HPT366: not 100%% native mode: will probe irqs later
Mar 29 18:32:43 Apollo kernel:     ide3: BM-DMA at 0xc400-0xc407, BIOS settings: hdg:DMA, hdh:pio
Mar 29 18:32:44 Apollo kernel: hda: WDC AC31200F, ATA DISK drive
Mar 29 18:32:44 Apollo kernel: hdb: Maxtor 88400D8, ATA DISK drive
Mar 29 18:32:44 Apollo kernel: hdc: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive
Mar 29 18:32:44 Apollo kernel: hde: Maxtor 34098H4, ATA DISK drive
Mar 29 18:32:44 Apollo kernel: hdf: Maxtor 5T060H6, ATA DISK drive
Mar 29 18:32:44 Apollo kernel: hdg: ST320413A, ATA DISK drive
Mar 29 18:32:44 Apollo kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 29 18:32:44 Apollo kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 29 18:32:44 Apollo kernel: ide2 at 0xb000-0xb007,0xb402 on irq 18
Mar 29 18:32:44 Apollo kernel: ide3 at 0xbc00-0xbc07,0xc002 on irq 18
Mar 29 18:32:44 Apollo kernel: hda: 2503872 sectors (1282 MB) w/64KiB Cache, CHS=621/64/63, DMA
Mar 29 18:32:44 Apollo kernel: hdb: 16408224 sectors (8401 MB) w/256KiB Cache, CHS=1021/255/63, UDMA(33)
Mar 29 18:32:44 Apollo kernel: hde: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=79408/16/63, UDMA(66)
Mar 29 18:32:44 Apollo kernel: hdf: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(66)
Mar 29 18:32:44 Apollo kernel: hdg: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(66)
Mar 29 18:32:44 Apollo kernel: hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Mar 29 18:32:44 Apollo xinetd: xinetd startup succeeded
Mar 29 18:32:44 Apollo kernel: Uniform CD-ROM driver Revision: 3.12
Mar 29 18:32:44 Apollo kernel: Partition check:
Mar 29 18:32:44 Apollo kernel:  hda: hda1 hda2
Mar 29 18:32:44 Apollo kernel:  hdb:
Mar 29 18:32:44 Apollo kernel:  hde: [EZD] [remap 0->1] [4982/255/63] hde1

  parent reply	other threads:[~2002-03-30  1:52 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-03-29 15:23 2.4.19-pre4-ac[23] do not boot Jean-Luc Coulon
2002-03-29 16:20 ` Alan Cox
2002-03-29 19:11   ` Jean-Luc Coulon
2002-03-29 19:42   ` Andre Hedrick
2002-03-29 20:01     ` Alan Cox
2002-03-29 19:56       ` Andre Hedrick
2002-03-29 21:14       ` Andre Hedrick
2002-03-29 22:09         ` Alan Cox
2002-03-30  1:51         ` Art Wagner [this message]
2002-03-30  9:35           ` Andre Hedrick
2002-03-30 22:01           ` Andre Hedrick
2002-04-04 18:23   ` Jean-Luc Coulon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3CA51A31.80405@westek-systems.com \
    --to=awagner@westek-systems.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=andre@linux-ide.org \
    --cc=jean-luc.coulon@wanadoo.fr \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox