From: Martin Dalecki <dalecki@evision-ventures.com>
To: Anton Altaparmakov <aia21@cam.ac.uk>
Cc: martin@dalecki.de, vojtech@suse.cz, linux-kernel@vger.kernel.org
Subject: Re: VIA and 2.5.8-pre kernels doesn't boot!
Date: Fri, 12 Apr 2002 09:46:36 +0200 [thread overview]
Message-ID: <3CB690DC.7020104@evision-ventures.com> (raw)
In-Reply-To: <5.1.0.14.2.20020412014716.01f7aec0@pop.cus.cam.ac.uk>
Anton Altaparmakov wrote:
> For me 2.5.8-pre2 and -pre3 (-pre1 not tested) both fail to boot on my
> VIA chipset box. 2.5.7 works fine.
>
> Best regards,
>
> Anton
>
> 2.5.8-pre3 prints on serial console and then it just dies:
> ----snip----
> Uniform Multi-Platform E-IDE driver ver.:7.0.0
> ide: system bus speed 33MHz
> VIA Technologies, Inc. Bus Master IDE: IDE controller on PCI slot 00:07.1
> VIA Technologies, Inc. Bus Master IDE: chipset revision 6
> VIA Technologies, Inc. Bus Master IDE: not 100% native mode: will probe
> irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: IC35L040AVER07-0, ATA DISK drive
> ----snip----
>
Does it crash dump thereafter? Could be that the code around
save_match doesn't get it right.
next prev parent reply other threads:[~2002-04-12 8:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-12 0:10 VIA, 32bit PIO and 2.5.x kernel Petr Vandrovec
2002-04-12 0:56 ` VIA and 2.5.8-pre kernels doesn't boot! Anton Altaparmakov
2002-04-12 7:46 ` Martin Dalecki [this message]
2002-04-12 10:10 ` Anton Altaparmakov
2002-04-12 8:20 ` VIA, 32bit PIO and 2.5.x kernel Vojtech Pavlik
2002-04-12 8:04 ` Martin Dalecki
2002-04-13 10:12 ` Russell King
2002-04-13 10:15 ` Vojtech Pavlik
2002-04-13 13:23 ` Martin Dalecki
2002-04-13 17:06 ` Andre Hedrick
2002-04-13 17:38 ` Alan Cox
2002-04-13 18:15 ` Andre Hedrick
2002-04-13 22:49 ` Martin Dalecki
2002-04-12 8:41 ` Jens Axboe
2002-04-12 9:15 ` Andre Hedrick
2002-04-12 8:53 ` Martin Dalecki
2002-04-12 10:16 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CB690DC.7020104@evision-ventures.com \
--to=dalecki@evision-ventures.com \
--cc=aia21@cam.ac.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=martin@dalecki.de \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox