From: Martin Dalecki <dalecki@evision-ventures.com>
To: Sebastian Droege <sebastian.droege@gmx.de>
Cc: axboe@suse.de, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] IDE TCQ #4
Date: Thu, 18 Apr 2002 13:20:15 +0200 [thread overview]
Message-ID: <3CBEABEF.1030009@evision-ventures.com> (raw)
In-Reply-To: <20020415125606.GR12608@suse.de> <02db01c1e498$7180c170$58dc703f@bnscorp.com> <20020416102510.GI17043@suse.de> <20020416200051.7ae38411.sebastian.droege@gmx.de> <20020416180914.GR1097@suse.de> <20020416204329.4c71102f.sebastian.droege@gmx.de> <3CBD28D1.6070702@evision-ventures.com> <20020417132852.4cf20276.sebastian.droege@gmx.de> <3CBD519F.7080207@evision-ventures.com> <20020418141746.2df4a948.sebastian.droege@gmx.de>
Sebastian Droege wrote:
> On Wed, 17 Apr 2002 12:42:39 +0200
> Martin Dalecki <dalecki@evision-ventures.com> wrote:
>
>
>>>2.
>>>when I cat /proc/ide/ide1/hdc/identify I get 2 unexpected interrupts
>>>hdc and hdd are both cdrom drives (accessed via scsi-emulation if relevant)
>>
>> > but the problem shows up only with hdc
>>
>>Duh oh... This is actually a good hint. I will look after
>>this.
>>
>>
>>>and maybe a third problem ;)
>>>in /proc/ide/ide0/hda/tcq there is written:
>>>DMA status: not running
>>
>>This is harmless it just shows that there was no DMA transfer in flight the
>>time you have cat-ed this file.
>>
>>
>>>but DMA is explicitly enabled by hdparm and shows up in /proc/ide/ide0/hda/settings
>>>
>>>I'll do some more testings later the day
>>
> Hi again,
> after some playing with hdparm I found something bad :(
>
> ide_tcq_intr_timeout: timeout waiting for interrupt
> ide_tcq_intr_timeout: hwgroup not busy
> hda: invalidating pending queue
> ide_tcq_invalidate_queue: done
>
> and then... nothing works anymore -> total lockup of the IDE system
> This happens only (?) when I put hdparm -qa1 -qA1 -qc1 -qd1 -qm16 -qu1 -qW1 /dev/hda (the same with hdb) in my bootscripts
> When I start hdparm later everything works fine first, but after a while (and when I'm under X) the IDE system is crashed
>
> I have enabled following options:
> CONFIG_BLK_DEV_IDE_TCQ=y
> CONFIG_BLK_DEV_IDE_TCQ_FULL=y
> CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
> CONFIG_BLK_DEV_IDE_TCQ_DEPTH=32
>
> I hope this helps somehow but I don't know what further informations I can provide
>
> BTW: I think we should create devfs entries for ide-scsi devices (because hdparm doesn't take scdX ;) )
>
> Bye
I don't know whatever you have already tryed the recend patches for 2.5.8.
The problem in place is presumably fixed there (tough there are still
problems with ide-cd remaining which I'm working on right now.)
BTW> Jens: Do you have any idea what the "sector chaing" in ide-cd is
good for?! I would love to just get rid of it alltogether!
--
- phone: +49 214 8656 283
- job: eVision-Ventures AG, LEV .de (MY OPINIONS ARE MY OWN!)
- langs: de_DE.ISO8859-1, en_US, pl_PL.ISO8859-2, last ressort: ru_RU.KOI8-R
next prev parent reply other threads:[~2002-04-18 12:22 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-15 12:56 [PATCH] IDE TCQ #4 Jens Axboe
2002-04-15 12:24 ` Martin Dalecki
2002-04-15 13:33 ` Jens Axboe
2002-04-15 12:39 ` Martin Dalecki
2002-04-15 16:13 ` Aaron Tiensivu
2002-04-15 16:18 ` Jens Axboe
2002-04-15 16:44 ` Jens Axboe
2002-04-16 10:25 ` Jens Axboe
[not found] ` <20020416200051.7ae38411.sebastian.droege@gmx.de>
[not found] ` <20020416180914.GR1097@suse.de>
2002-04-16 18:43 ` Sebastian Droege
2002-04-17 7:48 ` Martin Dalecki
2002-04-17 11:28 ` Sebastian Droege
2002-04-17 10:32 ` Martin Dalecki
2002-04-17 11:40 ` Sebastian Droege
2002-04-17 10:42 ` Martin Dalecki
2002-04-18 12:17 ` Sebastian Droege
2002-04-18 11:20 ` Martin Dalecki [this message]
2002-04-18 12:26 ` Sebastian Droege
2002-04-18 12:57 ` Jens Axboe
2002-04-18 12:57 ` Jens Axboe
2002-04-18 11:59 ` Martin Dalecki
2002-04-18 13:07 ` Jens Axboe
2002-04-18 12:08 ` Martin Dalecki
2002-04-18 13:12 ` Jens Axboe
2002-04-18 12:16 ` Martin Dalecki
2002-04-18 13:26 ` Jens Axboe
2002-04-18 12:40 ` Martin Dalecki
2002-04-18 12:45 ` Martin Dalecki
2002-04-18 14:17 ` Alan Cox
2002-04-18 13:01 ` Jens Axboe
2002-04-17 7:32 ` Helge Hafting
2002-04-17 13:01 ` Dave Jones
2002-04-17 13:05 ` Jens Axboe
2002-04-30 19:58 ` Martin Schewe
-- strict thread matches above, loose matches on Subject: below --
2002-04-15 18:41 Petr Vandrovec
2002-04-15 18:26 ` Jens Axboe
2002-04-16 5:11 ` Martin Dalecki
2002-04-15 19:11 Petr Vandrovec
2002-04-15 19:28 Petr Vandrovec
2002-04-16 10:25 ` Jens Axboe
2002-04-16 11:01 ` Martin Dalecki
2002-04-16 12:28 ` Jens Axboe
2002-04-16 11:44 ` Martin Dalecki
2002-04-15 19:29 Petr Vandrovec
2002-04-15 19:00 ` Jens Axboe
2002-04-18 22:05 Andries.Brouwer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CBEABEF.1030009@evision-ventures.com \
--to=dalecki@evision-ventures.com \
--cc=axboe@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=sebastian.droege@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox