From: Pierre Rousselet <pierre.rousselet@wanadoo.fr>
To: lkml <linux-kernel@vger.kernel.org>
Subject: 2.5.18 and HPT366
Date: Sat, 25 May 2002 09:56:06 +0200 [thread overview]
Message-ID: <3CEF4396.8080705@wanadoo.fr> (raw)
2.5.18 hangs at partition check. A workaround is to comment hpt366.c:868
config_chipset_for_pio(drive) in the function config_chipset_for_dma().
In this case the partition check looks to be done twice :
ATA: Triones Technologies, Inc. HPT366 / HPT370: controller, PCI slot
00:13.0
PCI: Found IRQ 11 for device 00:13.0
PCI: Sharing IRQ 11 with 00:13.1
ATA: chipset rev.: 1
ATA: non-legacy mode: IRQ probe delayed
ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio
ATA: Triones Technologies, Inc. HPT366 / HPT370 (#2): controller, PCI
slot 00:13.1
PCI: Found IRQ 11 for device 00:13.1
PCI: Sharing IRQ 11 with 00:13.0
ATA: chipset rev.: 1
ATA: non-legacy mode: IRQ probe delayed
ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:DMA, hdh:pio
hda: SAMSUNG DVD-ROM SD-616F, ATAPI CD/DVD-ROM drive
hde: ST310212A, ATA DISK drive
hdg: SAMSUNG SV0322A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xcc00-0xcc07,0xd002 on irq 11
ide3 at 0xd800-0xd807,0xdc02 on irq 11
hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33)
/dev/ide/host3/bus0/target0/lun0: p1
/dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4
/dev/ide/host3/bus0/target0/lun0: p1
Pierre
--
------------------------------------------------
Pierre Rousselet <pierre.rousselet@wanadoo.fr>
------------------------------------------------
reply other threads:[~2002-05-25 7:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CEF4396.8080705@wanadoo.fr \
--to=pierre.rousselet@wanadoo.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox