Hi,

Please ignore the Affix-1_00pre2.patch

Use this one
Affix-1_00pre2.patch.1

br, Dmitry


Dmitry Kasatkin wrote:
> Hi,
> 
> Small patch. Otherwise PCMCIA will not work (modules went to invalid 
> place).
> 
> br, Dmitry
> 
> Kasatkin Dmitry (NRC/Helsinki) wrote:
> 
>> Hi All,
>>
>> Find new Affix release Affix-1_00pre2 on http://affix.sourceforge.net
>> It has improved UART, USB and extra drivers.
>> Anycom cards supported
>>
>> Version 1.0pre2 [31.05.2002]
>> - [new] new drivers for *bluecard* cards (Anycom) and 3COM cards
>> - [new] cross-compiling support (ARM, PowerPC,...)
>> - [new] *open_uart* accept speed (no need to call stty)
>> - [fix] affix_uart support Xircom cards
>> - [changes] libbt*.so libs moved to libaffix*.so
>> - [fix] now can be compiled on kernels <= 2.4.6
>>
>>
>> Profiles supported:
>> - Service Discovery.
>> - Serial Port.
>> - LAN Access.
>> - Dialup Networking.
>> - OBEX Object Push.
>> - OBEX File Transfer.
>> - PAN.
>>
>>
>> GUI environment A.F.E - Affix Frontend Environment available for use.
>> http://affix.sourceforge.net/afe
>>
>> Link can be found on Affix WEB site in *Links* section.
>>
>> br, Dmitry
>> +358 50 4836365
>>
>>
>>
> 
> 
> ------------------------------------------------------------------------
> 
> diff -Naur Affix-1_00pre2/Configure affix/Configure
> --- Affix-1_00pre2/Configure	Sat Jun  1 03:07:45 2002
> +++ affix/Configure	Mon Jun  3 13:48:41 2002
> @@ -19,7 +19,7 @@
>  #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
>  #
>  #
> -#   $Id: Configure,v 2.48 2002/06/01 00:07:45 kds Exp $
> +#   $Id: Configure,v 2.50 2002/06/03 10:48:41 kds Exp $
>  #
>  #   Configuration script (adopted from PCMCIA package) 
>  #   
> @@ -403,19 +403,12 @@
>  
>  
>  if [ "$CONFIG_MODVERSIONS" = "y" ] ; then
> -    if [ $CONF_SRC != 1 ] ; then
>  	MODVER="$LINUX/include/linux/$MODVER"
>  	if [ ! -r "$MODVER" ] ; then
>  	    echo "$MODVER does not exist!"
>  	    echo "    To fix, run 'make dep' in $LINUX."
>  	    fail
>  	fi
> -    else
> -	# use running kernel
> -	mv $MODVER include/affix
> -	ln -sf ../../../include/affix/$MODVER ./kernel/include/linux/$MODVER
> -	MODVER="$BTDIR/kernel/include/linux/$MODVER"
> -    fi
>  else
>      rm -f $MODVER
>  fi
> @@ -474,6 +467,34 @@
>  CPPFLAGS_KERNEL="$CPPFLAGS_KERNEL -D__KERNEL__ -DMODULE $MFLAG"
>  LDFLAGS="${CROSS_LDFLAGS:-}"
>  
> +#=======================================================================
> +
> +# How should the startup scripts be configured?
> +
> +if [ "$PREFIX" = "" ] ; then
> +    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
> +	echo "It looks like you have a System V init file setup."
> +	SYSV_INIT=y
> +	if [ -d /sbin/init.d ] ; then
> +	    RC_DIR=/sbin/init.d
> +	elif [ -d /etc/rc.d/init.d ] ; then
> +	    RC_DIR=/etc/rc.d
> +	else
> +	    RC_DIR=/etc
> +	fi
> +    else
> +	echo "It looks like you have a BSD-ish init file setup."
> +	SYSV_INIT=
> +    fi
> +else
> +    ask_bool "System V init script layout" SYSV_INIT
> +    if [ "$SYSV_INIT" = "y" ] ; then
> +	ask_str "Top-level directory for RC scripts" RC_DIR
> +    fi
> +fi
> +
> +echo ""
> +
>  
>  #=======================================================================
>  
> @@ -503,42 +524,12 @@
>  	write_str_ne $x
>  done
>  for x in CROSS_COMPILE CROSS_CPPFLAGS CROSS_LDFLAGS \
> -	 BTDIR LINUX PREFIX PROGDIR LIBDIR RCDIR ARCH HOST_ARCH \
> +	 BTDIR LINUX PREFIX PROGDIR MODDIR LIBDIR RCDIR ARCH HOST_ARCH SYSV_INIT RC_DIR \
>  	 CPPFLAGS_KERNEL CPPFLAGS CFLAGS LDFLAGS CPPFLAGS_GLIB LDFLAGS_GLIB \
>  	 CPPFLAGS_OBEX LDFLAGS_OBEX; do
>      write_str_cfg $x
>  done
>  write_nl
> -
> -#=======================================================================
> -
> -# How should the startup scripts be configured?
> -
> -if [ "$PREFIX" = "" ] ; then
> -    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
> -	echo "It looks like you have a System V init file setup."
> -	SYSV_INIT=y
> -	if [ -d /sbin/init.d ] ; then
> -	    RC_DIR=/sbin/init.d
> -	elif [ -d /etc/rc.d/init.d ] ; then
> -	    RC_DIR=/etc/rc.d
> -	else
> -	    RC_DIR=/etc
> -	fi
> -    else
> -	echo "It looks like you have a BSD-ish init file setup."
> -	SYSV_INIT=
> -    fi
> -    write_bool SYSV_INIT
> -    if [ "$SYSV_INIT" = "y" ] ; then write_str_cfg RC_DIR ; fi
> -else
> -    ask_bool "System V init script layout" SYSV_INIT
> -    if [ "$SYSV_INIT" = "y" ] ; then
> -	ask_str "Top-level directory for RC scripts" RC_DIR
> -    fi
> -fi
> -
> -echo ""
>  
>  #=======================================================================
>  
> diff -Naur Affix-1_00pre2/etc/Makefile affix/etc/Makefile
> --- Affix-1_00pre2/etc/Makefile	Fri May 31 01:44:35 2002
> +++ affix/etc/Makefile	Mon Jun  3 13:34:36 2002
> @@ -18,7 +18,7 @@
>  #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
>  #
>  #
> -#   $Id: Makefile,v 1.25 2002/05/30 22:44:35 kds Exp $
> +#   $Id: Makefile,v 1.26 2002/06/03 10:34:36 kds Exp $
>  #
>  #   Makefile for installing scripts
>  #
> @@ -50,7 +50,7 @@
>  	install -m 0755 -d $(PREFIX)/etc/ppp/ip-down.d
>  	install -m 0555 ./affix/masq-down $(PREFIX)/etc/ppp/ip-down.d
>  
> -	if [ -d /etc/modutils ] ; then \
> +	@if [ -d /etc/modutils ] ; then \
>  		install -m 0644 ./modutils /etc/modutils/affix; \
>  		update-modules; \
>  	fi


-- 
  Dmitry Kasatkin
  Nokia Research Center / Helsinki
  Mobile: +358 50 4836365
  E-Mail: dmitry.kasatkin@nokia.com