* Re: ALi IDE problem
[not found] ` <3CFC58DC.269E0C88@daimi.au.dk>
@ 2002-06-04 10:52 ` Kasper Dupont
2002-06-05 17:42 ` Andre Hedrick
0 siblings, 1 reply; 2+ messages in thread
From: Kasper Dupont @ 2002-06-04 10:52 UTC (permalink / raw)
To: Andre Hedrick, Alan Cox; +Cc: Linux-Kernel
Kasper Dupont wrote:
>
> Andre Hedrick wrote:
> >
> > Kasper,
> >
> > http://www.linuxdiskcert.org/ide-2.4.19-p8-ac1.all.convert.10.patch.bz2
> > http://www.linuxdiskcert.org/ide-2.4.19-p7.all.convert.10.patch.bz2
> >
> > Please try this on top of a stock 2.4.19-pre8-ac1 plus patch.
> > Also try a stock 2.4.19-pre7 plus patch.
> >
> > First, at line 553.
> >
> > #define ALI_INIT_CODE_TEST
> >
> > Change to
> >
> > #undef ALI_INIT_CODE_TEST
>
> Many hourse of kernel compilations later:
>
> The following works:
> -pre7
> -pre8-ac1
> -pre8-ac2
>
> The following fails:
> -pre7 with ide patch
> -pre8-ac1 with ide patch
> -pre8-ac3
> -pre8-ac4
> -pre8-ac5
>
> Changing ALI_INIT_CODE_TEST doesn't help.
> It fails both with #define and #undef.
>
> Perhaps I should try reverting the patch
> against -pre9-ac3?
Reverting the patch against 2.4.19-pre9-ac3 seems to solve my
problem. Now DMA works. (A single hunk got rejected and had
to be applied by hand.)
--
Kasper Dupont -- der bruger for meget tid på usenet.
For sending spam use mailto:razor-report@daimi.au.dk
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: ALi IDE problem
2002-06-04 10:52 ` ALi IDE problem Kasper Dupont
@ 2002-06-05 17:42 ` Andre Hedrick
0 siblings, 0 replies; 2+ messages in thread
From: Andre Hedrick @ 2002-06-05 17:42 UTC (permalink / raw)
To: Kasper Dupont; +Cc: Alan Cox, Linux-Kernel
I am away for the week, but will get back to you.
On Tue, 4 Jun 2002, Kasper Dupont wrote:
> Kasper Dupont wrote:
> >
> > Andre Hedrick wrote:
> > >
> > > Kasper,
> > >
> > > http://www.linuxdiskcert.org/ide-2.4.19-p8-ac1.all.convert.10.patch.bz2
> > > http://www.linuxdiskcert.org/ide-2.4.19-p7.all.convert.10.patch.bz2
> > >
> > > Please try this on top of a stock 2.4.19-pre8-ac1 plus patch.
> > > Also try a stock 2.4.19-pre7 plus patch.
> > >
> > > First, at line 553.
> > >
> > > #define ALI_INIT_CODE_TEST
> > >
> > > Change to
> > >
> > > #undef ALI_INIT_CODE_TEST
> >
> > Many hourse of kernel compilations later:
> >
> > The following works:
> > -pre7
> > -pre8-ac1
> > -pre8-ac2
> >
> > The following fails:
> > -pre7 with ide patch
> > -pre8-ac1 with ide patch
> > -pre8-ac3
> > -pre8-ac4
> > -pre8-ac5
> >
> > Changing ALI_INIT_CODE_TEST doesn't help.
> > It fails both with #define and #undef.
> >
> > Perhaps I should try reverting the patch
> > against -pre9-ac3?
>
> Reverting the patch against 2.4.19-pre9-ac3 seems to solve my
> problem. Now DMA works. (A single hunk got rejected and had
> to be applied by hand.)
>
> --
> Kasper Dupont -- der bruger for meget tid på usenet.
> For sending spam use mailto:razor-report@daimi.au.dk
>
Andre Hedrick
LAD Storage Consulting Group
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-06-05 17:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <Pine.LNX.4.10.10206021436530.5846-100000@master.linux-ide.org>
[not found] ` <3CFC58DC.269E0C88@daimi.au.dk>
2002-06-04 10:52 ` ALi IDE problem Kasper Dupont
2002-06-05 17:42 ` Andre Hedrick
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox