* Re: 2.4.19pre10aa1
2002-06-07 2:08 ` 2.4.19pre10aa1 Andrea Arcangeli
@ 2002-06-07 15:10 ` J.A. Magallon
0 siblings, 0 replies; 4+ messages in thread
From: J.A. Magallon @ 2002-06-07 15:10 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, linux-kernel
On 2002.06.07 Andrea Arcangeli wrote:
>
>to export to modules, right, I don't use it as module so I didn't
>noticed. Oh well, it's too late now to update. I will upload a new one
>tomorrow if I find the time or it will wait one week.
>
While you are at it, could you take a look at what I have as the
read-latency-2 patch ? If it is worth, is really short and easy to include.
(Credits to Andrew Morton)
--- 2.4.19-pre5/drivers/block/elevator.c~read-latency2 Sat Mar 30 11:16:34 2002
+++ 2.4.19-pre5-akpm/drivers/block/elevator.c Sat Mar 30 11:16:34 2002
@@ -80,30 +80,38 @@ int elevator_linus_merge(request_queue_t
struct buffer_head *bh, int rw,
int max_sectors)
{
- struct list_head *entry = &q->queue_head;
- unsigned int count = bh->b_size >> 9, ret = ELEVATOR_NO_MERGE;
-
+ struct list_head *entry;
+ unsigned int count = bh->b_size >> 9;
+ unsigned int ret = ELEVATOR_NO_MERGE;
+ int merge_only = 0;
+ const int max_bomb_segments = q->elevator.max_bomb_segments;
+
+ entry = &q->queue_head;
while ((entry = entry->prev) != head) {
struct request *__rq = blkdev_entry_to_request(entry);
- /*
- * simply "aging" of requests in queue
- */
- if (__rq->elevator_sequence-- <= 0)
- break;
-
+ if (__rq->elevator_sequence-- <= 0) {
+ /*
+ * OK, we've exceeded someone's latency limit.
+ * But we still continue to look for merges,
+ * because they're so much better than seeks.
+ */
+ merge_only = 1;
+ }
if (__rq->waiting)
continue;
if (__rq->rq_dev != bh->b_rdev)
continue;
- if (!*req && bh_rq_in_between(bh, __rq, &q->queue_head))
+ if (!*req && !merge_only &&
+ bh_rq_in_between(bh, __rq, &q->queue_head)) {
*req = __rq;
+ }
if (__rq->cmd != rw)
continue;
if (__rq->nr_sectors + count > max_sectors)
continue;
if (__rq->elevator_sequence < count)
- break;
+ merge_only = 1;
if (__rq->sector + __rq->nr_sectors == bh->b_rsector) {
ret = ELEVATOR_BACK_MERGE;
*req = __rq;
@@ -116,6 +124,56 @@ int elevator_linus_merge(request_queue_t
}
}
+ /*
+ * If we failed to merge a read anywhere in the request
+ * queue, we really don't want to place it at the end
+ * of the list, behind lots of writes. So place it near
+ * the front.
+ *
+ * We don't want to place it in front of _all_ writes: that
+ * would create lots of seeking, and isn't tunable.
+ * We try to avoid promoting this read in front of existing
+ * reads.
+ *
+ * max_bomb_segments becomes the maximum number of write
+ * requests which we allow to remain in place in front of
+ * a newly introduced read. We weight things a little bit,
+ * so large writes are more expensive than small ones, but it's
+ * requests which count, not sectors.
+ */
+ if (max_bomb_segments && rw == READ && ret == ELEVATOR_NO_MERGE) {
+ int cur_latency = 0;
+ struct request * const cur_request = *req;
+
+ entry = head->next;
+ while (entry != &q->queue_head) {
+ struct request *__rq;
+
+ if (entry == &q->queue_head)
+ BUG();
+ if (entry == q->queue_head.next &&
+ q->head_active && !q->plugged)
+ BUG();
+ __rq = blkdev_entry_to_request(entry);
+
+ if (__rq == cur_request) {
+ /*
+ * This is where the old algorithm placed it.
+ * There's no point pushing it further back,
+ * so leave it here, in sorted order.
+ */
+ break;
+ }
+ if (__rq->cmd == WRITE) {
+ cur_latency += 1 + __rq->nr_sectors / 64;
+ if (cur_latency >= max_bomb_segments) {
+ *req = __rq;
+ break;
+ }
+ }
+ entry = entry->next;
+ }
+ }
return ret;
}
@@ -188,7 +246,7 @@ int blkelvget_ioctl(elevator_t * elevato
output.queue_ID = elevator->queue_ID;
output.read_latency = elevator->read_latency;
output.write_latency = elevator->write_latency;
- output.max_bomb_segments = 0;
+ output.max_bomb_segments = elevator->max_bomb_segments;
if (copy_to_user(arg, &output, sizeof(blkelv_ioctl_arg_t)))
return -EFAULT;
@@ -207,9 +265,12 @@ int blkelvset_ioctl(elevator_t * elevato
return -EINVAL;
if (input.write_latency < 0)
return -EINVAL;
+ if (input.max_bomb_segments < 0)
+ return -EINVAL;
elevator->read_latency = input.read_latency;
elevator->write_latency = input.write_latency;
+ elevator->max_bomb_segments = input.max_bomb_segments;
return 0;
}
--- 2.4.19-pre5/drivers/block/ll_rw_blk.c~read-latency2 Sat Mar 30 11:16:34 2002
+++ 2.4.19-pre5-akpm/drivers/block/ll_rw_blk.c Sat Mar 30 11:46:53 2002
@@ -439,9 +439,11 @@ static void blk_init_free_list(request_q
si_meminfo(&si);
megs = si.totalram >> (20 - PAGE_SHIFT);
- nr_requests = 128;
- if (megs < 32)
- nr_requests /= 2;
+ nr_requests = (megs * 2) & ~15; /* One per half-megabyte */
+ if (nr_requests < 32)
+ nr_requests = 32;
+ if (nr_requests > 1024)
+ nr_requests = 1024;
blk_grow_request_list(q, nr_requests);
init_waitqueue_head(&q->wait_for_requests[0]);
--- 2.4.19-pre5/include/linux/elevator.h~read-latency2 Sat Mar 30 11:16:34 2002
+++ 2.4.19-pre5-akpm/include/linux/elevator.h Sat Mar 30 11:16:34 2002
@@ -1,12 +1,9 @@
#ifndef _LINUX_ELEVATOR_H
#define _LINUX_ELEVATOR_H
-typedef void (elevator_fn) (struct request *, elevator_t *,
- struct list_head *,
- struct list_head *, int);
-
-typedef int (elevator_merge_fn) (request_queue_t *, struct request **, struct list_head *,
- struct buffer_head *, int, int);
+typedef int (elevator_merge_fn)(request_queue_t *, struct request **,
+ struct list_head *, struct buffer_head *bh,
+ int rw, int max_sectors);
typedef void (elevator_merge_cleanup_fn) (request_queue_t *, struct request *, int);
@@ -16,6 +13,7 @@ struct elevator_s
{
int read_latency;
int write_latency;
+ int max_bomb_segments;
elevator_merge_fn *elevator_merge_fn;
elevator_merge_cleanup_fn *elevator_merge_cleanup_fn;
@@ -24,13 +22,13 @@ struct elevator_s
unsigned int queue_ID;
};
-int elevator_noop_merge(request_queue_t *, struct request **, struct list_head *, struct buffer_head *, int, int);
-void elevator_noop_merge_cleanup(request_queue_t *, struct request *, int);
-void elevator_noop_merge_req(struct request *, struct request *);
-
-int elevator_linus_merge(request_queue_t *, struct request **, struct list_head *, struct buffer_head *, int, int);
-void elevator_linus_merge_cleanup(request_queue_t *, struct request *, int);
-void elevator_linus_merge_req(struct request *, struct request *);
+elevator_merge_fn elevator_noop_merge;
+elevator_merge_cleanup_fn elevator_noop_merge_cleanup;
+elevator_merge_req_fn elevator_noop_merge_req;
+
+elevator_merge_fn elevator_linus_merge;
+elevator_merge_cleanup_fn elevator_linus_merge_cleanup;
+elevator_merge_req_fn elevator_linus_merge_req;
typedef struct blkelv_ioctl_arg_s {
int queue_ID;
@@ -54,22 +52,6 @@ extern void elevator_init(elevator_t *,
#define ELEVATOR_FRONT_MERGE 1
#define ELEVATOR_BACK_MERGE 2
-/*
- * This is used in the elevator algorithm. We don't prioritise reads
- * over writes any more --- although reads are more time-critical than
- * writes, by treating them equally we increase filesystem throughput.
- * This turns out to give better overall performance. -- sct
- */
-#define IN_ORDER(s1,s2) \
- ((((s1)->rq_dev == (s2)->rq_dev && \
- (s1)->sector < (s2)->sector)) || \
- (s1)->rq_dev < (s2)->rq_dev)
-
-#define BHRQ_IN_ORDER(bh, rq) \
- ((((bh)->b_rdev == (rq)->rq_dev && \
- (bh)->b_rsector < (rq)->sector)) || \
- (bh)->b_rdev < (rq)->rq_dev)
-
static inline int elevator_request_latency(elevator_t * elevator, int rw)
{
int latency;
@@ -85,7 +67,7 @@ static inline int elevator_request_laten
((elevator_t) { \
0, /* read_latency */ \
0, /* write_latency */ \
- \
+ 0, /* max_bomb_segments */ \
elevator_noop_merge, /* elevator_merge_fn */ \
elevator_noop_merge_cleanup, /* elevator_merge_cleanup_fn */ \
elevator_noop_merge_req, /* elevator_merge_req_fn */ \
@@ -95,7 +77,7 @@ static inline int elevator_request_laten
((elevator_t) { \
8192, /* read passovers */ \
16384, /* write passovers */ \
- \
+ 6, /* max_bomb_segments */ \
elevator_linus_merge, /* elevator_merge_fn */ \
elevator_linus_merge_cleanup, /* elevator_merge_cleanup_fn */ \
elevator_linus_merge_req, /* elevator_merge_req_fn */ \
--
J.A. Magallon # Let the source be with you...
mailto:jamagallon@able.es
Mandrake Linux release 8.3 (Cooker) for i586
Linux werewolf 2.4.19-pre10-jam2 #1 SMP jue jun 6 16:05:12 CEST 2002 i686
^ permalink raw reply [flat|nested] 4+ messages in thread