From: Albert Cranford <ac9410@bellsouth.net>
To: Linux Kernel List <linux-kernel@vger.kernel.org>,
Linus Torvalds <torvalds@transmeta.com>
Subject: [PATCH]-revised 2.5.21 lm_sensors support 1/5
Date: Sun, 09 Jun 2002 20:41:23 -0400 [thread overview]
Message-ID: <3D03F5B3.BD857572@bellsouth.net> (raw)
Adjusted subdir i2c/busses and i2c/chips from within
i2c/Makefile and not from drivers/Makefile.
--- linux/drivers/i2c/Config.in.orig 2002-05-20 09:58:09.000000000 -0400
+++ linux/drivers/i2c/Config.in 2002-05-20 10:00:17.000000000 -0400
@@ -45,5 +45,7 @@
dep_tristate 'I2C device interface' CONFIG_I2C_CHARDEV $CONFIG_I2C
dep_tristate 'I2C /proc interface (required for hardware sensors)' CONFIG_I2C_PROC $CONFIG_I2C $CONFIG_SYSCTL
+ source drivers/i2c/busses/Config.in
+ source drivers/i2c/chips/Config.in
fi
endmenu
--- linux/drivers/i2c/Makefile.orig 2002-06-09 19:37:29.000000000 -0400
+++ linux/drivers/i2c/Makefile 2002-06-09 19:32:33.000000000 -0400
@@ -16,6 +16,8 @@
obj-$(CONFIG_ITE_I2C_ALGO) += i2c-algo-ite.o
obj-$(CONFIG_ITE_I2C_ADAP) += i2c-adap-ite.o
obj-$(CONFIG_I2C_PROC) += i2c-proc.o
+obj-$(CONFIG_MAINBOARD) += busses/
+obj-$(CONFIG_SENSORS) += chips/
# This is needed for automatic patch generation: sensors code starts here
# This is needed for automatic patch generation: sensors code ends here
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/busses/Config.in 2002-05-20 10:00:58.000000000 -0400
@@ -0,0 +1,32 @@
+#
+# Sensor device configuration
+# All depend on CONFIG_I2C_PROC.
+# ISA-only devices depend on CONFIG_I2C_ISA also.
+#
+
+if [ "$CONFIG_I2C" = "m" -o "$CONFIG_I2C" = "y" ] ; then
+if [ "$CONFIG_I2C_PROC" = "m" -o "$CONFIG_I2C_PROC" = "y" ] ; then
+ mainmenu_option next_comment
+ comment 'Hardware sensors mainboard support'
+
+ dep_mbool 'Hardware sensors mainboard support' CONFIG_MAINBOARD $CONFIG_I2C $CONFIG_I2C_PROC
+
+ if [ "$CONFIG_MAINBOARD" = "y" ]; then
+ tristate ' Acer Labs ALI 1535' CONFIG_I2C_ALI1535
+ tristate ' Acer Labs ALI 1533 and 1543C' CONFIG_I2C_ALI15X3
+ tristate ' AMD 756/766' CONFIG_I2C_AMD756
+ dep_tristate ' Apple Hydra Mac I/O' CONFIG_I2C_HYDRA $CONFIG_I2C_ALGOBIT
+ tristate ' Intel 82801AA, 82801AB and 82801BA' CONFIG_I2C_I801
+ dep_tristate ' Intel i810AA, i810AB and i815' CONFIG_I2C_I810 $CONFIG_I2C_ALGOBIT
+ tristate ' Pseudo ISA adapter (for some hardware sensors)' CONFIG_I2C_ISA
+ tristate ' Intel 82371AB PIIX4(E), ServerWorks OSB4/CSB5' CONFIG_I2C_PIIX4
+ tristate ' SiS 5595' CONFIG_I2C_SIS5595
+ dep_tristate ' DEC Tsunami I2C interface' CONFIG_I2C_TSUNAMI $CONFIG_I2C_ALGOBIT
+ dep_tristate ' VIA Technologies, Inc. VT82C586B' CONFIG_I2C_VIA $CONFIG_I2C_ALGOBIT
+ tristate ' VIA Technologies, Inc. VT596A/B' CONFIG_I2C_VIAPRO
+ dep_tristate ' Voodoo3 I2C interface' CONFIG_I2C_VOODOO3 $CONFIG_I2C_ALGOBIT
+ fi
+endmenu
+fi
+fi
+
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/busses/Makefile 2002-05-20 02:09:47.000000000 -0400
@@ -0,0 +1,27 @@
+#
+# Makefile for the kernel hardware sensors bus drivers.
+#
+
+MOD_LIST_NAME := SENSORS_BUS_MODULES
+
+export-objs := i2c-ali1535.o
+
+obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o
+obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o
+obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
+obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
+obj-$(CONFIG_I2C_I801) += i2c-i801.o
+obj-$(CONFIG_I2C_I810) += i2c-i810.o
+obj-$(CONFIG_I2C_ISA) += i2c-isa.o
+obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o
+obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
+ifeq ($(MACHINE),alpha)
+ obj-$(CONFIG_I2C_TSUNAMI) += i2c-tsunami.o
+endif
+obj-$(CONFIG_I2C_VIA) += i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+
+
+include $(TOPDIR)/Rules.make
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/chips/Config.in 2002-05-19 23:40:48.000000000 -0400
@@ -0,0 +1,46 @@
+#
+# Sensor device configuration
+# All depend on CONFIG_I2C_PROC.
+# ISA-only devices depend on CONFIG_I2C_ISA also.
+#
+
+if [ "$CONFIG_I2C" = "m" -o "$CONFIG_I2C" = "y" ] ; then
+if [ "$CONFIG_I2C_PROC" = "m" -o "$CONFIG_I2C_PROC" = "y" ] ; then
+ mainmenu_option next_comment
+ comment 'Hardware sensors chip support'
+
+ dep_mbool 'Hardware sensors chip support' CONFIG_SENSORS $CONFIG_I2C $CONFIG_I2C_PROC
+
+ if [ "$CONFIG_SENSORS" != "n" ]; then
+ dep_tristate ' Analog Devices ADM1021 and compatibles' CONFIG_SENSORS_ADM1021 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Analog Devices ADM1024' CONFIG_SENSORS_ADM1024 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Analog Devices ADM1025' CONFIG_SENSORS_ADM1025 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Analog Devices ADM9240 and compatibles' CONFIG_SENSORS_ADM9240 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Dallas DS1621 and DS1625' CONFIG_SENSORS_DS1621 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Fujitsu-Siemens Poseidon' CONFIG_SENSORS_FSCPOS $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Fujitsu-Siemens Scylla' CONFIG_SENSORS_FSCSCY $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Genesys Logic GL518SM' CONFIG_SENSORS_GL518SM $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Genesys Logic GL520SM' CONFIG_SENSORS_GL520SM $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' HP Maxilife' CONFIG_SENSORS_MAXILIFE $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' ITE 8705/8712, SiS950' CONFIG_SENSORS_IT87 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Myson MTP008' CONFIG_SENSORS_MTP008 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' National Semiconductors LM75 and compatibles' CONFIG_SENSORS_LM75 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' National Semiconductors LM78' CONFIG_SENSORS_LM78 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' National Semiconductors LM80' CONFIG_SENSORS_LM80 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' National Semiconductors LM87' CONFIG_SENSORS_LM87 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Silicon Integrated Systems Corp. SiS5595' CONFIG_SENSORS_SIS5595 $CONFIG_I2C $CONFIG_I2C_PROC $CONFIG_I2C_ISA
+ dep_tristate ' Texas Instruments THMC50 and compatibles' CONFIG_SENSORS_THMC50 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' VIA 686a Integrated Hardware Monitor' CONFIG_SENSORS_VIA686A $CONFIG_I2C $CONFIG_I2C_PROC $CONFIG_I2C_ISA
+ dep_tristate ' Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F' CONFIG_SENSORS_W83781D $CONFIG_I2C $CONFIG_I2C_PROC
+ bool 'Other I2C devices' CONFIG_SENSORS_OTHER
+ if [ "$CONFIG_SENSORS_OTHER" = "y" ] ; then
+ dep_tristate ' Brooktree BT869 Video Modulator' CONFIG_SENSORS_BT869 $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' DDC Monitor EDID EEPROM' CONFIG_SENSORS_DDCMON $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' EEprom (DIMM) reader ' CONFIG_SENSORS_EEPROM $CONFIG_I2C $CONFIG_I2C_PROC
+ dep_tristate ' Matrix-Orbital LCD Displays' CONFIG_SENSORS_MATORB $CONFIG_I2C $CONFIG_I2C_PROC
+ fi
+ fi
+ endmenu
+fi
+fi
+
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/chips/Makefile 2002-05-20 02:22:58.000000000 -0400
@@ -0,0 +1,37 @@
+#
+# Makefile for the kernel hardware sensors chip drivers.
+#
+
+MOD_LIST_NAME := SENSORS_CHIPS_MODULES
+
+obj-$(CONFIG_SENSORS) += sensors.o
+obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
+obj-$(CONFIG_SENSORS_ADM1024) += adm1024.o
+obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
+obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_BT869) += bt869.o
+obj-$(CONFIG_SENSORS_DDCMON) += ddcmon.o
+obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
+obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
+obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
+obj-$(CONFIG_SENSORS_FSCSCY) += fscscy.o
+obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
+obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
+obj-$(CONFIG_SENSORS_ICSPLL) += icspll.o
+obj-$(CONFIG_SENSORS_IT87) += it87.o
+obj-$(CONFIG_SENSORS_LM75) += lm75.o
+obj-$(CONFIG_SENSORS_LM78) += lm78.o
+obj-$(CONFIG_SENSORS_LM80) += lm80.o
+obj-$(CONFIG_SENSORS_LM87) += lm87.o
+obj-$(CONFIG_SENSORS_LTC1710) += ltc1710.o
+obj-$(CONFIG_SENSORS_MATORB) += matorb.o
+obj-$(CONFIG_SENSORS_MAXILIFE) += maxilife.o
+obj-$(CONFIG_SENSORS_MTP008) += mtp008.o
+obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
+obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
+obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
+obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
+
+include $(TOPDIR)/Rules.make
--
Albert Cranford Deerfield Beach FL USA
ac9410@bellsouth.net
reply other threads:[~2002-06-10 0:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D03F5B3.BD857572@bellsouth.net \
--to=ac9410@bellsouth.net \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox