From: Douglas Gilbert <dougg@torque.net>
To: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: fdisk on scsi disks in 2.5.21
Date: Mon, 10 Jun 2002 20:28:34 -0400 [thread overview]
Message-ID: <3D054432.88C5BE59@torque.net> (raw)
$ fdisk -l /dev/sda
Disk /dev/sda: 1 heads, 35843670 sectors, 1 cylinders
Units = cylinders of 35843670 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1 32098+ 83 Linux
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 1) logical=(0, 0, 64)
Partition 1 has different physical/logical endings:
phys=(3, 254, 63) logical=(0, 0, 64260)
Partition 1 does not end on cylinder boundary:
phys=(3, 254, 63) should be (3, 0, 35843670)
/dev/sda2 1 1 168682+ 83 Linux
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(4, 0, 1) logical=(0, 0, 64261)
Partition 2 has different physical/logical endings:
phys=(24, 254, 63) logical=(0, 0, 401625)
Partition 2 does not end on cylinder boundary:
phys=(24, 254, 63) should be (24, 0, 35843670)
....
One head, one cylinder and lots of sectors??
I put some debug in drivers/scsi/scsicam.c and it doesn't
seem like it was called.
Is my fdisk (from RH 7.2) too old?
Doug Gilbert
next reply other threads:[~2002-06-11 0:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-11 0:28 Douglas Gilbert [this message]
2002-06-11 6:28 ` fdisk on scsi disks in 2.5.21 Martin Dalecki
2002-06-11 12:40 ` Douglas Gilbert
-- strict thread matches above, loose matches on Subject: below --
2002-06-11 12:51 Andries.Brouwer
2002-06-12 12:19 ` Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D054432.88C5BE59@torque.net \
--to=dougg@torque.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox