From: Dieter Stueken <stueken@conterra.de>
To: linux-kernel@vger.kernel.org
Subject: Re: [FREEZE] 2.4.19-pre10 + Promise ATA100 tx2 ver 2.20
Date: Sun, 07 Jul 2002 21:44:20 +0200 [thread overview]
Message-ID: <3D289A14.29B713C5@conterra.de> (raw)
Jussi Laako wrote:
> No matter which one of the
> installations is booted, the system will lock up if the VIA controller is in
> use at the same time as the PDC. However, system seems to be stable (short
> test priod though) if only the PDC controller is in use. (I left the old
> drives attached to the VIA controller unmounted.)
>
> Does this problem sound similar to yours?
seems similar to my problem. If I connect large (75-120G) disks on
both PDC channels and run /sbin/badblocks in parallel (dd might do, too)
I get a kernel panic/freeze. I get it even with no disk on the onboard
controller. I can reproduce this on two different VIA boards with both,
a PDC20267 and a PDC20262, too. On a board with Ali chiset, however
no error occured during a short (5 minutes) test. On a board with an
Intel
chipset I got some "DMA timeout" after 3 hours, but may be this was
an unrelated problem.
Dieter.
next reply other threads:[~2002-07-07 19:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-07 19:44 Dieter Stueken [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-06-22 18:22 [FREEZE] 2.4.19-pre10 + Promise ATA100 tx2 ver 2.20 Fabio Massimo Di Nitto
2002-06-22 18:45 ` Måns Rullgård
2002-06-22 18:53 ` Fabio Massimo Di Nitto
2002-06-22 21:25 ` Måns Rullgård
2002-06-23 6:19 ` Fabio Massimo Di Nitto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D289A14.29B713C5@conterra.de \
--to=stueken@conterra.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox