From: Fabio Massimo Di Nitto <fabbione@fabbione.net>
To: Patrick Mansfield <patmans@us.ibm.com>
Cc: "Thomas Langås" <tlan@stud.ntnu.no>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Linux Kernel 2.4.18 and 2.4.19 problems
Date: Fri, 19 Jul 2002 23:26:14 +0200 [thread overview]
Message-ID: <3D3883F6.7090608@fabbione.net> (raw)
In-Reply-To: 20020719140416.A25577@eng2.beaverton.ibm.com
Patrick Mansfield wrote:
>On Fri, Jul 19, 2002 at 09:26:07PM +0200, Thomas Langås wrote:
>
>
>>qla2x00_set_info starts at address = f8836060
>>qla2x00: Found VID=1077 DID=2200 SSVID=1077 SSDID=2
>>scsi1: Found a QLA2200 @ bus 2, device 0x4, irq 16, iobase 0xdc00
>>scsi(1): Allocated 4096 SRB(s)
>>PCI: Setting latency timer of device 02:04.0 to 64
>>scsi(1): Configure NVRAM parameters...
>>scsi(1): 64 Bit PCI Addressing Enabled
>>scsi(1): Verifying loaded RISC code...
>>scsi(1): Verifying chip...
>>scsi(1): Waiting for LIP to complete...
>>scsi(1): Cable is unplugged...
>>qla2x00: Found VID=1077 DID=2200 SSVID=1077 SSDID=2
>>scsi2: Found a QLA2200 @ bus 2, device 0x5, irq 17, iobase 0xd800
>>scsi(2): Allocated 4096 SRB(s)
>>PCI: Setting latency timer of device 02:05.0 to 64
>>scsi(2): Configure NVRAM parameters...
>>scsi(2): 64 Bit PCI Addressing Enabled
>>scsi(2): Verifying loaded RISC code...
>>scsi(2): Verifying chip...
>>scsi(2): Waiting for LIP to complete...
>>scsi(2): Cable is unplugged...
>>
I have an HSG80 connected on the other side and I got this problem with
the beta6 drivers from qlogic.
The only way I made it working was using the kernel driver shipped with
rh7.3
that has been modified to support the HSG80 (according to the changelog
supported
only by the beta6 series).
Fabio
next prev parent reply other threads:[~2002-07-19 21:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-19 19:26 Linux Kernel 2.4.18 and 2.4.19 problems Thomas Langås
2002-07-19 21:04 ` Patrick Mansfield
2002-07-19 21:21 ` Thomas Langås
2002-07-19 21:26 ` Fabio Massimo Di Nitto [this message]
2002-07-19 21:44 ` Thomas Langås
2002-07-19 22:36 ` Austin Gonyou
2002-07-19 22:55 ` Thomas Langås
2002-07-25 12:40 ` Bill Davidsen
2002-07-21 2:46 ` Thomas Langås
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D3883F6.7090608@fabbione.net \
--to=fabbione@fabbione.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=patmans@us.ibm.com \
--cc=tlan@stud.ntnu.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox