From: Marcin Dalecki <dalecki@evision.ag>
To: Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linus Torvalds <torvalds@transmeta.com>
Subject: [PATCH] 2.5.30 Maestro3
Date: Mon, 05 Aug 2002 15:52:27 +0200 [thread overview]
Message-ID: <3D4E831B.30000@evision.ag> (raw)
[-- Attachment #1: Type: text/plain, Size: 191 bytes --]
The attached patch is updating the Maestro3 OSS sound chip driver to
1. The changes in IRQ handline.
2. C99 standard conformant initializers.
Plese apply. (I happen to use such a chip...)
[-- Attachment #2: maestro3-2.5.30.diff --]
[-- Type: text/plain, Size: 3731 bytes --]
diff -durNp -X /tmp/diff.uRHk8V linux-2.5.30/sound/oss/maestro3.c linux/sound/oss/maestro3.c
--- linux-2.5.30/sound/oss/maestro3.c 2002-08-01 23:16:35.000000000 +0200
+++ linux/sound/oss/maestro3.c 2002-08-03 19:01:34.000000000 +0200
@@ -1605,12 +1605,12 @@ static int m3_ioctl(struct inode *inode,
spin_lock_irqsave(&s->lock, flags);
if (file->f_mode & FMODE_WRITE) {
stop_dac(s);
- synchronize_irq();
+ synchronize_irq(s->card->irq);
s->dma_dac.swptr = s->dma_dac.hwptr = s->dma_dac.count = s->dma_dac.total_bytes = 0;
}
if (file->f_mode & FMODE_READ) {
stop_adc(s);
- synchronize_irq();
+ synchronize_irq(s->card->irq);
s->dma_adc.swptr = s->dma_adc.hwptr = s->dma_adc.count = s->dma_adc.total_bytes = 0;
}
spin_unlock_irqrestore(&s->lock, flags);
@@ -2172,11 +2172,11 @@ static int m3_ioctl_mixdev(struct inode
}
static struct file_operations m3_mixer_fops = {
- owner: THIS_MODULE,
- llseek: no_llseek,
- ioctl: m3_ioctl_mixdev,
- open: m3_open_mixdev,
- release: m3_release_mixdev,
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .ioctl = m3_ioctl_mixdev,
+ .open = m3_open_mixdev,
+ .release = m3_release_mixdev,
};
void remote_codec_config(int io, int isremote)
@@ -2546,15 +2546,15 @@ static void m3_enable_ints(struct m3_car
}
static struct file_operations m3_audio_fops = {
- owner: THIS_MODULE,
- llseek: &no_llseek,
- read: &m3_read,
- write: &m3_write,
- poll: &m3_poll,
- ioctl: &m3_ioctl,
- mmap: &m3_mmap,
- open: &m3_open,
- release: &m3_release,
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = m3_read,
+ .write = m3_write,
+ .poll = m3_poll,
+ .ioctl = m3_ioctl,
+ .mmap = m3_mmap,
+ .open = m3_open,
+ .release = m3_release,
};
#ifdef CONFIG_PM
@@ -2777,8 +2777,7 @@ static int m3_suspend(struct pci_dev *pc
struct m3_card *card = pci_get_drvdata(pci_dev);
/* must be a better way.. */
- save_flags(flags);
- cli();
+ local_irq_save(flags);
DPRINTK(DPMOD, "pm in dev %p\n",card);
@@ -2816,7 +2815,7 @@ static int m3_suspend(struct pci_dev *pc
card->in_suspend = 1;
- restore_flags(flags);
+ local_irq_restore(flags);
return 0;
}
@@ -2828,8 +2827,7 @@ static int m3_resume(struct pci_dev *pci
int i;
struct m3_card *card = pci_get_drvdata(pci_dev);
- save_flags(flags); /* paranoia */
- cli();
+ local_irq_save(flags); /* paranoia */
card->in_suspend = 0;
DPRINTK(DPMOD, "resuming\n");
@@ -2888,13 +2886,13 @@ static int m3_resume(struct pci_dev *pci
* called unconditionally..
*/
DPRINTK(DPMOD, "turning on dacs ind %d\n",i);
- start_dac(s);
- start_adc(s);
+ start_dac(s);
+ start_adc(s);
}
- restore_flags(flags);
+ local_irq_restore(flags);
- /*
+ /*
* all right, we think things are ready,
* wake up people who were using the device
* when we suspended
@@ -2914,12 +2912,12 @@ MODULE_PARM(debug,"i");
MODULE_PARM(external_amp,"i");
static struct pci_driver m3_pci_driver = {
- name: "ess_m3_audio",
- id_table: m3_id_table,
- probe: m3_probe,
- remove: m3_remove,
- suspend: m3_suspend,
- resume: m3_resume,
+ .name = "ess_m3_audio",
+ .id_table = m3_id_table,
+ .probe = m3_probe,
+ .remove = m3_remove,
+ .suspend = m3_suspend,
+ .resume = m3_resume,
};
static int __init m3_init_module(void)
next reply other threads:[~2002-08-05 13:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-05 13:52 Marcin Dalecki [this message]
2002-08-05 15:25 ` [PATCH] 2.5.30 Maestro3 Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D4E831B.30000@evision.ag \
--to=dalecki@evision.ag \
--cc=linux-kernel@vger.kernel.org \
--cc=martin@dalecki.de \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox