* kernel panic: no init found with 2.5.32 @ 2002-08-30 19:32 Stefano Biella 2002-08-30 19:38 ` Dan Egli 0 siblings, 1 reply; 6+ messages in thread From: Stefano Biella @ 2002-08-30 19:32 UTC (permalink / raw) To: linux-kernel I have a slackware 8.1 machine that works fine with 2.4.18/19 kernels, but,when I reboot with the 2.5.31/32 kernels, the system have a "kernel panic: no init found. try passing init= option to kernel" The fs is a reisersfs v.3.6 on Intel PIIX4 chipset with udma33 disk. The disk is not corrupted because if I back to 2.4.X the machine boot fine. what's wrong? ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel panic: no init found with 2.5.32 2002-08-30 19:32 kernel panic: no init found with 2.5.32 Stefano Biella @ 2002-08-30 19:38 ` Dan Egli 2002-08-30 19:51 ` Stefano Biella 0 siblings, 1 reply; 6+ messages in thread From: Dan Egli @ 2002-08-30 19:38 UTC (permalink / raw) To: Stefano Biella; +Cc: linux-kernel What are you passing as the init= arg? What is your boot manager? (Grub? Lilo? 3rd Party?) no init means that when the kernel boot sequence tries to spawn off /sbin/init, it cannot find the file.The fault could be any one of multiple. It would help in the future if for problems like this you pasted your boot loader config file. ----- Original Message ----- From: "Stefano Biella" <sbiella@hal9001.net> To: <linux-kernel@vger.kernel.org> Sent: Friday, August 30, 2002 1:32 PM Subject: kernel panic: no init found with 2.5.32 > I have a slackware 8.1 machine that works fine with 2.4.18/19 kernels, > but,when I reboot with the 2.5.31/32 kernels, the system have a "kernel > panic: no init found. try passing init= option to kernel" The fs is a > reisersfs v.3.6 on Intel PIIX4 chipset with udma33 disk. > The disk is not corrupted because if I back to 2.4.X the machine boot > fine. > > what's wrong? > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel panic: no init found with 2.5.32 2002-08-30 19:38 ` Dan Egli @ 2002-08-30 19:51 ` Stefano Biella 2002-08-30 20:18 ` Richard B. Johnson 0 siblings, 1 reply; 6+ messages in thread From: Stefano Biella @ 2002-08-30 19:51 UTC (permalink / raw) To: Dan Egli; +Cc: linux-kernel Dan Egli wrote: > > What are you passing as the init= arg? What is your boot manager? (Grub? > Lilo? 3rd Party?) the boot manager is Lilo 22.2 my lilo.conf is: ----------------- boot= /dev/hda image = /boot/vmlinuz root = /dev/hda2 label = Linux read-only ----------------- > no init means that when the kernel boot sequence tries to spawn off > /sbin/init, it cannot find the file.The fault could be any one of multiple. I don't know why with 2.4.xx works fine and with 2.5.xx make a kernel panic... ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel panic: no init found with 2.5.32 2002-08-30 19:51 ` Stefano Biella @ 2002-08-30 20:18 ` Richard B. Johnson 2002-08-30 21:13 ` Stefano Biella 0 siblings, 1 reply; 6+ messages in thread From: Richard B. Johnson @ 2002-08-30 20:18 UTC (permalink / raw) To: Stefano Biella; +Cc: Dan Egli, linux-kernel On Fri, 30 Aug 2002, Stefano Biella wrote: > Dan Egli wrote: > > > > What are you passing as the init= arg? What is your boot manager? (Grub? > > Lilo? 3rd Party?) > > the boot manager is Lilo 22.2 > > my lilo.conf is: > ----------------- > boot= /dev/hda > image = /boot/vmlinuz > root = /dev/hda2 > label = Linux > read-only > ----------------- > > > no init means that when the kernel boot sequence tries to spawn off > > /sbin/init, it cannot find the file.The fault could be any one of multiple. > > I don't know why with 2.4.xx works fine and with 2.5.xx make a kernel > panic... > The driver for /dev/hda2 (IDE driver) may not have been compiled in or not otherwise installed. This would make the root file-system inaccessible so /sbin/init can't be found. Check for other boot messages to verify this. Cheers, Dick Johnson Penguin : Linux version 2.4.18 on an i686 machine (797.90 BogoMips). The US military has given us many words, FUBAR, SNAFU, now ENRON. Yes, top management were graduates of West Point and Annapolis. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel panic: no init found with 2.5.32 2002-08-30 20:18 ` Richard B. Johnson @ 2002-08-30 21:13 ` Stefano Biella 2002-08-31 9:41 ` Stefano Biella 0 siblings, 1 reply; 6+ messages in thread From: Stefano Biella @ 2002-08-30 21:13 UTC (permalink / raw) To: root; +Cc: Dan Egli, linux-kernel "Richard B. Johnson" wrote: > > The driver for /dev/hda2 (IDE driver) may not have been compiled in > or not otherwise installed. This would make the root file-system > inaccessible so /sbin/init can't be found. The driver is compiled in :-) and the kernel detect the disk. The disk appear to being correctly mounted ro, but the system hang... ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel panic: no init found with 2.5.32 2002-08-30 21:13 ` Stefano Biella @ 2002-08-31 9:41 ` Stefano Biella 0 siblings, 0 replies; 6+ messages in thread From: Stefano Biella @ 2002-08-31 9:41 UTC (permalink / raw) To: root, Dan Egli, linux-kernel I've tried to compile with a minimal 2.5.32 kernel: CONFIG_X86=y CONFIG_ISA=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_NET=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_M686=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_PPRO_FENCE=y CONFIG_NOHIGHMEM=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_PIIX=y CONFIG_PIIX_TUNING=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_INPUT=y CONFIG_SOUND_GAMEPORT=y CONFIG_INPUT_KEYBOARD=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_REISERFS_FS=y CONFIG_RAMFS=y CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y CONFIG_MSDOS_PARTITION=y CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y CONFIG_SECURITY_CAPABILITIES=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y This is my last row on the screen before the kernel panic: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 11 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x10c0-0x10x7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x10c8-0x10cf, BIOS settings: hdc:pio, hdd:pio hda: HITACHI_DK239A-65, ATA DISK drive hdc: SANYO CRD-S372BVA, ATAPI CD/RVR-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c020544, I/O limit 4095Mb (mask 0xffffffff) hda: host protected area => 1 hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=789/255/63, UDMA(33) hdc: ATAPI 24X CD-ROM drive, 256kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hda: hda1 hda2 found reiserfs format "3.6" with standard journal Reiserfs hournal params: device ide0(3,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,2)) for (ide0(3,2)) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 208K freed Kernel panic: No init found. Try passing init= option to kernel. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-08-31 9:39 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2002-08-30 19:32 kernel panic: no init found with 2.5.32 Stefano Biella 2002-08-30 19:38 ` Dan Egli 2002-08-30 19:51 ` Stefano Biella 2002-08-30 20:18 ` Richard B. Johnson 2002-08-30 21:13 ` Stefano Biella 2002-08-31 9:41 ` Stefano Biella
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox