linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alessandro Suardi <alessandro.suardi@oracle.com>
To: cijoml@volny.cz
Cc: linux-kernel@vger.kernel.org
Subject: Re: smc-ircc freeze kernel
Date: Sat, 31 Aug 2002 22:07:51 +0200	[thread overview]
Message-ID: <3D712217.5030003@oracle.com> (raw)
In-Reply-To: E17l52I-0000NL-00@notas

Michal Semler wrote:
> Hello,
> 
> I use 2.4.19 kernel with notebook Dell Latitude CPx J650
> 
> I modprobe these modules:
> irlan                  19252   0 (unused)
> smc-ircc                6720   1
> irport                  4856   0 [smc-ircc]
> irda                   81744   1 [irlan smc-ircc irport]
> 
> kernel tells me:
> found SMC SuperIO Chip (devid=0x09 rev=08 base=0x03f0): FDC37N958FR
> SMC IrDA Controller found
>  IrCC version 1.1, firport 0x290, sirport 0x3e8 dma=3, irq=0
> IrDA: Registered device irda0
> 
> ifconfig tells me:
> irda0     Link encap:IrLAP  HWaddr 00:00:00:00
>           UP RUNNING NOARP  MTU:2048  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:8
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Base address:0x3e8
> 
> then when I simply tells:
> ifconfig irda0 192.168.1.1 netmask 255.255.255.0
> my kernel freeze after 3 seconds and only numlock and scrolllock blinks
> 
> I dont have any other computer on other side at the moment I write ifconfig.

Works fine here on 2.4.20-pre5, gcc-3.2, Dell CPx750J with the
  same IR chipset you have.

[root@dolphin root]# cat /proc/version
Linux version 2.4.20-pre5 (asuardi@dolphin) (gcc version 3.2) #1 Fri Aug 
30 01:11:42 CEST 2002

[root@dolphin root]# ifconfig irda0
irda0     Link encap:IrLAP  HWaddr 5b:21:2a:64
           inet addr:192.168.1.1  Mask:255.255.255.0
           UP RUNNING NOARP  MTU:2048  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:5056 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:8
           RX bytes:0 (0.0 b)  TX bytes:158118 (154.4 Kb)
           Interrupt:4 Base address:0x3e8

[root@dolphin root]# findchip -v
Found SMC FDC37N958FR Controller at 0x3f0, DevID=0x01, Rev. 1
     SIR Base 0x3e8, FIR Base 0x290
     IRQ = 4, DMA = 3
     Enabled: yes, Suspended: no
     UART compatible: yes
     Half duplex delay = 3 us

[root@dolphin root]# lsmod | grep ir
smc-ircc                7584   1
irport                  5368   1  [smc-ircc]
ircomm                  8712   0  (unused)
irlan                  23028   1
irda                   93520   1  [smc-ircc irport ircomm irlan]


Ciao,

--alessandro

  "everything dies, baby that's a fact
    but maybe everything that dies someday comes back"
        (Bruce Springsteen, "Atlantic City")


  reply	other threads:[~2002-08-31 20:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-08-31  9:59 smc-ircc freeze kernel Michal Semler
2002-08-31 20:07 ` Alessandro Suardi [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-09-03 20:47 Jean Tourrilhes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D712217.5030003@oracle.com \
    --to=alessandro.suardi@oracle.com \
    --cc=cijoml@volny.cz \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).