From: Jean-Luc Coulon <jean-luc.coulon@wanadoo.fr>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Rik van Riel <riel@conectiva.com.br>, linux-kernel@vger.kernel.org
Subject: Re: 2.4.20-pre2-ac3 stops responding
Date: Mon, 02 Sep 2002 11:16:31 +0200 [thread overview]
Message-ID: <3D732C6F.FCABFAE0@wanadoo.fr> (raw)
In-Reply-To: 1029611747.4647.3.camel@irongate.swansea.linux.org.uk
Alan Cox wrote:
>
> "On Fri, 2002-08-16 at 18:13, Jean-Luc Coulon wrote:
> > At boot time, I get the messages :
> >
> > Aug 16 11:34:19 f5ibh kernel: ALI15X3: simplex device: DMA disabled
> > Aug 16 11:34:19 f5ibh kernel: ide0: ALI15X3 Bus-Master DMA disabled
> > (BIOS)
>
> Linux did the simplex device check. Your ALi controller only permits DMA
> on one of the devices at a time. What is attached to the ALi controller
> ? Also does 2.4.19 base enable DMA correctly ?
>
What is the simplex device check ? You will find thereafter a copy of
the syslog while booting 2.4.19, it seems that it accepts both with DMA
enabled.
> If sSep 2 09:00:51 f5ibh kernel: ALI15X3: chipset revision 193
f5ibh kernel: ALI15X3: not 100%% native mode: will probe irqs later
f5ibh kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA,
hdb:DMA
f5ibh kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio,
hdd:pio
f5ibh kernel: hda: QUANTUM FIREBALLP LM30, ATA DISK drive
fibh kernel: hdb: ST3491A, ATA DISK drive
f5ibh kernel: hdc: GoldStar CD-RW CED-8083B, ATAPI CD/DVD-ROM drive
f5ibh kernel: hdd: CREATIVECD3621E, ATAPI CD/DVD-ROM drive
f5ibh kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
f5ibh kernel: ide1 at 0x170-0x177,0x376 on irq 15
f5ibh kernel: blk: queue c023d544, I/O limit 4095Mb (mask 0xffffffff)
f5ibh kernel: hda: 58633344 sectors (30020 MB) w/1900KiB Cache,
CHS=3649/255/63, UDMA(33)
f5ibh kernel: blk: queue c023d680, I/O limit 4095Mb (mask 0xffffffff)
f5ibh kernel: hdb: 836070 sectors (428 MB) w/120KiB Cache,
CHS=899/15/62, DMA
---
Regards
Jean-Luc
next prev parent reply other threads:[~2002-09-02 9:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-16 13:30 2.4.20-pre2-ac3 stops responding Jean-Luc Coulon
2002-08-16 13:37 ` Rik van Riel
2002-08-16 16:29 ` Jean-Luc Coulon
2002-08-16 16:40 ` Rik van Riel
2002-08-16 17:13 ` Jean-Luc Coulon
2002-08-17 19:15 ` Alan Cox
2002-08-17 21:36 ` Andre Hedrick
2002-08-24 12:52 ` Jean-Luc Coulon
2002-08-24 13:07 ` Jean-Luc Coulon
2002-09-02 9:16 ` Jean-Luc Coulon [this message]
2002-09-02 9:30 ` Jens Axboe
2002-09-02 9:36 ` Jean-Luc Coulon
2002-08-16 16:44 ` Andrew Rodland
2002-08-16 17:14 ` Jean-Luc Coulon
2002-08-16 14:21 ` Heinz Diehl
2002-08-16 15:26 ` Tomas Szepe
2002-08-16 16:22 ` Jean-Luc Coulon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D732C6F.FCABFAE0@wanadoo.fr \
--to=jean-luc.coulon@wanadoo.fr \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=riel@conectiva.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox