From: kwijibo@zianet.com
To: linux-kernel@vger.kernel.org
Subject: Errors on D-Link DFE-580TX
Date: Mon, 16 Sep 2002 16:57:40 -0600 [thread overview]
Message-ID: <3D8661E4.702@zianet.com> (raw)
I get these errors on using the D-Link DFE-580TX 4 port ethernet card.
This is with a RedHat kernel 2.4.18-5smp and using the latest sundance
driver version 1.09. These errors used to be much more frequent with
earlier versions of the driver but they still occur. These errors are
just a
few of the many in my syslog.
eth0: Too much work at interrupt, status=0x0205 / 0x0205 .. 0x0214.
eth0: Transmit timed out, status 8c0, resetting...
Rx ring de3c3000: 00008053 0000803c 0000804a 0000804a 0000803c
00008040 00008040 0000803c 0000804a 0
000803c 0000803c 0000803c 0000803c 0000803c 00008067 00008067 00008067
00008067 00008040 00008040 00008
067 0000803c 0000803c 00008040 00008040 0000803c 0000803c 0000808e
0000804a 00008067
Tx ring de3c3200: 80018001 80018005 80018009 8001800d 80018011
80018015 80018019 8001801d 0018029 8001802d 80018031
80018035 80018039 8001803d
eth0: Too much work at interrupt, status=0x0005 / 0x0205 .. 0x0204.
eth0: Transmit timed out, status 9c0, resetting...
Rx ring de3c3000: 0000803c 00008067 0000803c 0000803c 0000804a
0000804a 0000803c 0000803c 0008040 00008040 0000803c
0000803c 0000803c 0000803c 0000803c 0000803c 0000804a 0000803c
0000 040 00008040 0000803c 00008067 0000803c 00008067
00008067 00008067 00008067 00008067
Tx ring de3c3200: 80018001 80018005 80018009 8001800d 80018011
80018015 80018019 8001801d 0018029 8001802d 80018031
80018035 80018039 8001803d
Here is output of the card init:
sundance.c:v1.09 7/13/2002 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/sundance.html
eth0: D-Link DFE-580TX (Sundance ST201) at 0xdc00, 00:05:5d:e6:2b:05,
IRQ 11.
eth0: MII PHY found at address 1, status 0x782d advertising 01e1.
eth1: D-Link DFE-580TX (Sundance ST201) at 0xd880, 00:05:5d:e6:2b:06,
IRQ 10.
eth1: MII PHY found at address 1, status 0x7809 advertising 01e1.
eth2: D-Link DFE-580TX (Sundance ST201) at 0xd800, 00:05:5d:e6:2b:07, IRQ 9.
eth2: MII PHY found at address 1, status 0x7809 advertising 01e1.
eth3: D-Link DFE-580TX (Sundance ST201) at 0xd480, 00:05:5d:e6:2b:08,
IRQ 11.
eth3: MII PHY found at address 1, status 0x7809 advertising 01e1.
Any ideas on what it could be? The card will stop working for a bit
after a reset but
it always comes back. This kind of behavior won't work for a production
box however.
Steve
reply other threads:[~2002-09-16 23:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D8661E4.702@zianet.com \
--to=kwijibo@zianet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox