From: Ben Greear <greearb@candelatech.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: tg3 and Netgear GA302T x 2 locks machine
Date: Thu, 03 Oct 2002 21:19:37 -0700 [thread overview]
Message-ID: <3D9D16D9.7040008@candelatech.com> (raw)
Got my two new Netgear GA302t nics today. They seem to use the
tg3 driver....
I put them into the 64/66 slots on my Tyan dual amd motherboard..
Running kernel 2.4.20-pre8
eth2 is plugged into eth3 over cross-over cable.
The tg3 found and used them, mostly:
tg3.c:v1.1 (Aug 30, 2002)
eth2: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:40:f4:47:20:56
eth3: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:40:f4:47:22:fd
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is off for TX and off for RX.
...
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is off for TX and off for RX.
tg3: eth3: Link is down.
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is on for TX and on for RX.
I tried to start traffic with pktgen, and the machine hangs solid.
The last thing I see is:
[root@localhost root]# tg3: eth2: transmit timed out, resetting
Any ideas? Is this NIC supposed to work with tg3?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
next reply other threads:[~2002-10-04 4:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-04 4:19 Ben Greear [this message]
2002-10-04 5:06 ` tg3 and Netgear GA302T x 2 locks machine Ben Greear
2002-10-04 15:52 ` James Morris
2002-10-05 5:50 ` Ben Greear
2002-10-04 21:24 ` David S. Miller
2002-10-05 1:20 ` James Morris
2002-10-05 1:15 ` David S. Miller
2002-10-05 6:03 ` Ben Greear
2002-10-05 20:08 ` Ben Greear
2002-10-06 4:23 ` David S. Miller
2002-10-06 4:58 ` Ben Greear
2002-10-05 2:01 ` Matthew N. Andrews
2002-10-05 5:47 ` Ben Greear
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D9D16D9.7040008@candelatech.com \
--to=greearb@candelatech.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox