From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 4 Oct 2002 22:06:58 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 4 Oct 2002 22:06:58 -0400 Received: from postal2.lbl.gov ([131.243.248.26]:16791 "EHLO postal2.lbl.gov") by vger.kernel.org with ESMTP id ; Fri, 4 Oct 2002 22:06:57 -0400 Message-ID: <3D9E47FD.9060205@slackers.net> Date: Fri, 04 Oct 2002 19:01:33 -0700 From: "Matthew N. Andrews" User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.0) Gecko/20020607 X-Accept-Language: en-us, en MIME-Version: 1.0 To: James Morris CC: "David S. Miller" , greearb@candelatech.com, linux-kernel@vger.kernel.org Subject: Re: tg3 and Netgear GA302T x 2 locks machine References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org James Morris wrote: >On Fri, 4 Oct 2002, David S. Miller wrote: > > > >> From: Ben Greear >> Date: Thu, 03 Oct 2002 21:19:37 -0700 >> >> Got my two new Netgear GA302t nics today. They seem to use the >> tg3 driver.... >> >> I put them into the 64/66 slots on my Tyan dual amd motherboard.. >> Running kernel 2.4.20-pre8 >> >>You reported the other week problems with two Acenic's in >>this same machine right? The second Acenic wouldn't even probe >>properly. And the two Acenic's were identical. >> >> >> > >FWIW, my GA302T seems fine with the kernel he originally reported >(2.4.20-pre8). > > >- James > > What version of the bios does your motherboard have? I had problems with a dual syskonnect board on this motherboard(tyan 2466) where it would not would not initialize properly under the older bios. -Matt