* [PATCHSET 1/17] support PC-9800 against 2.5.45-ac1 (boot)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
@ 2002-11-06 17:25 ` Osamu Tomita
2002-11-06 17:35 ` [PATCHSET 2/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (15 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 17:25 UTC (permalink / raw)
To: Alan Cox, LKML
[-- Attachment #1: Type: text/plain, Size: 366 bytes --]
This patch is for already merged files, to follow changes for
standard PC in -ac1.
diffstat:
arch/i386/boot98/Makefile | 2 +-
arch/i386/boot98/compressed/head.S | 8 ++++----
arch/i386/boot98/compressed/misc.c | 6 +++++-
arch/i386/boot98/setup.S | 29 ++++++++++++++++++++---------
4 files changed, 30 insertions(+), 15 deletions(-)
[-- Attachment #2: boot98.patch --]
[-- Type: text/plain, Size: 4748 bytes --]
diff -urN linux-2.5.45-ac1/arch/i386/boot98/Makefile linux98-2.5.45-ac1/arch/i386/boot98/Makefile
--- linux-2.5.45-ac1/arch/i386/boot98/Makefile Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/Makefile Thu Oct 31 09:42:28 2002
@@ -46,7 +46,7 @@
$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
-quiet_cmd_image = BUILD $(echo_target)
+quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
diff -urN linux-2.5.45-ac1/arch/i386/boot98/compressed/head.S linux98-2.5.45-ac1/arch/i386/boot98/compressed/head.S
--- linux-2.5.45-ac1/arch/i386/boot98/compressed/head.S Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/compressed/head.S Tue Nov 5 10:16:17 2002
@@ -31,7 +31,7 @@
startup_32:
cld
cli
- movl $(__KERNEL_DS),%eax
+ movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
@@ -74,7 +74,7 @@
popl %esi # discard address
popl %esi # real mode pointer
xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $0x100000
+ ljmp $(__BOOT_CS), $0x100000
/*
* We come here, if we were loaded high.
@@ -101,7 +101,7 @@
popl %eax # hcount
movl $0x100000,%edi
cli # make sure we don't get interrupted
- ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
+ ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
/*
* Routine (template) for moving the decompressed kernel in place,
@@ -124,5 +124,5 @@
movsl
movl %ebx,%esi # Restore setup pointer
xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $0x100000
+ ljmp $(__BOOT_CS), $0x100000
move_routine_end:
diff -urN linux-2.5.45-ac1/arch/i386/boot98/compressed/misc.c linux98-2.5.45-ac1/arch/i386/boot98/compressed/misc.c
--- linux-2.5.45-ac1/arch/i386/boot98/compressed/misc.c Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/compressed/misc.c Wed Nov 6 15:10:28 2002
@@ -301,7 +301,7 @@
struct {
long * a;
short b;
- } stack_start = { & user_stack [STACK_SIZE] , __KERNEL_DS };
+ } stack_start = { & user_stack [STACK_SIZE] , __BOOT_DS };
static void setup_normal_output_buffer(void)
{
@@ -373,3 +373,7 @@
if (high_loaded) close_output_buffer_if_we_run_high(mv);
return high_loaded;
}
+
+/* We don't actually check for stack overflows this early. */
+__asm__(".globl mcount ; mcount: ret\n");
+
diff -urN linux-2.5.45-ac1/arch/i386/boot98/setup.S linux98-2.5.45-ac1/arch/i386/boot98/setup.S
--- linux-2.5.45-ac1/arch/i386/boot98/setup.S Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/setup.S Wed Nov 6 15:23:42 2002
@@ -660,7 +660,7 @@
subw $DELTA_INITSEG, %si
shll $4, %esi # Convert to 32-bit pointer
# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__KERNEL_CS
+# jmpi 0x100000,__BOOT_CS
#
# but we yet haven't reloaded the CS register, so the default size
# of the target offset still is 16 bit.
@@ -671,7 +671,7 @@
.byte 0x66, 0xea # prefix + jmpi-opcode
code32: .long 0x1000 # will be set to 0x100000
# for big kernels
- .word __KERNEL_CS
+ .word __BOOT_CS
# Here's a bunch of information about your current kernel..
kernel_version: .ascii UTS_RELEASE
@@ -902,13 +902,19 @@
# Descriptor tables
#
-# NOTE: if you think the GDT is large, you can make it smaller by just
-# defining the KERNEL_CS and KERNEL_DS entries and shifting the gdt
-# address down by GDT_ENTRY_KERNEL_CS*8. This puts bogus entries into
-# the GDT, but those wont be used so it's not a problem.
+# NOTE: The intel manual says gdt should be sixteen bytes aligned for
+# efficiency reasons. However, there are machines which are known not
+# to boot with misaligned GDTs, so alter this at your peril! If you alter
+# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
+# empty GDT entries (one for NULL and one reserved).
#
+# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
+# true for the Voyager Quad CPU card which will not boot without
+# This directive. 16 byte aligment is recommended by intel.
+#
+ .align 16
gdt:
- .fill GDT_ENTRY_KERNEL_CS,8,0
+ .fill GDT_ENTRY_BOOT_CS,8,0
.word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
.word 0 # base address = 0
@@ -921,12 +927,17 @@
.word 0x9200 # data read/write
.word 0x00CF # granularity = 4096, 386
# (+5th nibble of limit)
+gdt_end:
+ .align 4
+
+ .word 0 # alignment byte
idt_48:
.word 0 # idt limit = 0
.word 0, 0 # idt base = 0L
-gdt_48:
- .word GDT_ENTRY_KERNEL_CS*8 + 16 - 1 # gdt limit
+ .word 0 # alignment byte
+gdt_48:
+ .word gdt_end - gdt - 1 # gdt limit
.word 0, 0 # gdt base (filled in later)
# Include video setup & detection code
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 2/17] support PC-9800 against 2.5.45-ac1
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
2002-11-06 17:25 ` [PATCHSET 1/17] support PC-9800 against 2.5.45-ac1 (boot) Osamu Tomita
@ 2002-11-06 17:35 ` Osamu Tomita
2002-11-06 17:40 ` [PATCHSET 3/17] support PC-9800 against 2.5.45-ac1 (core) Osamu Tomita
` (14 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 17:35 UTC (permalink / raw)
To: Alan Cox, LKML
[-- Attachment #1: Type: text/plain, Size: 173 bytes --]
This is for already merged file, too.
Merged PC-9800 specific "#define"s into floppy98.c.
And don't change include/asm-i386/floppy.h, include/linux/fdreg.h
--
Osamu tomita
[-- Attachment #2: floppy.patch --]
[-- Type: text/plain, Size: 2354 bytes --]
--- linux-2.5.45-ac1/drivers/block/floppy98.c.orig Tue Nov 5 10:16:20 2002
+++ linux-2.5.45-ac1/drivers/block/floppy98.c Wed Nov 6 20:51:58 2002
@@ -176,7 +176,15 @@
#include <linux/fd.h>
+#define FLOPPY98_MOTOR_MASK 0x08
+
+#define FDPATCHES
#include <linux/hdreg.h>
+#define FD98_STATUS (0 + FD_IOPORT )
+#define FD98_DATA (2 + FD_IOPORT )
+#define FD_MODE (4 + FD_IOPORT )
+#define FD_MODE_CHANGE 0xbe
+#define FD_EMODE_CHANGE 0x4be
#include <linux/errno.h>
#include <linux/slab.h>
@@ -784,10 +792,10 @@
fd_outb(newdor, FD_MODE);
}
- if (newdor & FLOPPY_MOTOR_MASK)
+ if (newdor & FLOPPY98_MOTOR_MASK)
floppy_grab_irq_and_dma();
- if (olddor & FLOPPY_MOTOR_MASK)
+ if (olddor & FLOPPY98_MOTOR_MASK)
floppy_release_irq_and_dma();
return olddor;
@@ -828,7 +836,7 @@
if (FDCS->rawcmd == 2)
reset_fdc_info(1);
- if (fd_inb(FD_STATUS) != STATUS_READY)
+ if (fd_inb(FD98_STATUS) != STATUS_READY)
FDCS->reset = 1;
}
@@ -1146,7 +1154,7 @@
if (FDCS->reset)
return -1;
for (counter = 0; counter < READY_DELAY; counter++) {
- status = fd_inb(FD_STATUS);
+ status = fd_inb(FD98_STATUS);
if (status & STATUS_READY)
return status;
}
@@ -1167,7 +1175,7 @@
if ((status = wait_til_ready()) < 0)
return -1;
if ((status & (STATUS_READY|STATUS_DIR|STATUS_DMA)) == STATUS_READY){
- fd_outb(byte,FD_DATA);
+ fd_outb(byte,FD98_DATA);
#ifdef FLOPPY_SANITY_CHECK
output_log[output_log_pos].data = byte;
output_log[output_log_pos].status = status;
@@ -1203,7 +1211,7 @@
return i;
}
if (status == (STATUS_DIR|STATUS_READY|STATUS_BUSY))
- reply_buffer[i] = fd_inb(FD_DATA);
+ reply_buffer[i] = fd_inb(FD98_DATA);
else
break;
}
@@ -1793,7 +1801,7 @@
printk("\n");
#endif
- printk("status=%x\n", fd_inb(FD_STATUS));
+ printk("status=%x\n", fd_inb(FD98_STATUS));
printk("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
printk("do_floppy=%p\n", do_floppy);
@@ -2344,7 +2352,7 @@
{
if (end_that_request_first(req, uptodate, current_count_sectors))
return;
- add_blkdev_randomness(MAJOR_NR);
+ add_disk_randomness(req->rq_disk);
floppy_off((int)req->rq_disk->private_data);
blkdev_dequeue_request(req);
end_that_request_last(req);
@@ -4251,6 +4259,7 @@
int err;
raw_cmd = NULL;
+ FDC1 = 0x90;
for (i=0; i<N_DRIVE; i++) {
disks[i] = alloc_disk(1);
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 3/17] support PC-9800 against 2.5.45-ac1 (core)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
2002-11-06 17:25 ` [PATCHSET 1/17] support PC-9800 against 2.5.45-ac1 (boot) Osamu Tomita
2002-11-06 17:35 ` [PATCHSET 2/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
@ 2002-11-06 17:40 ` Osamu Tomita
2002-11-06 17:52 ` [PATCHSET 5/17] support PC-9800 against 2.5.45-ac1 (apm) Osamu Tomita
` (13 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 17:40 UTC (permalink / raw)
To: Alan Cox, LKML
[-- Attachment #1: Type: text/plain, Size: 1809 bytes --]
This patch includes arch/i386/* that not merged.
diffstat:
[root@precia patch]# diffstat -p1 arch-i386.patch
arch/i386/Kconfig | 24 +++-
arch/i386/Makefile | 15 ++
arch/i386/kernel/setup.c | 99 ----------------
arch/i386/kernel/time.c | 115 ++-----------------
arch/i386/kernel/timers/timer_pit.c | 22 ++-
arch/i386/kernel/timers/timer_tsc.c | 92 +--------------
arch/i386/kernel/traps.c | 12 --
arch/i386/mach-generic/calibrate_tsc.h | 90 +++++++++++++++
arch/i386/mach-generic/mach_resources.h | 113 ++++++++++++++++++
arch/i386/mach-generic/mach_time.h | 122 ++++++++++++++++++++
arch/i386/mach-generic/mach_traps.h | 29 ++++
arch/i386/mach-pc9800/calibrate_tsc.h | 71 +++++++++++
arch/i386/mach-pc9800/do_timer.h | 80 +++++++++++++
arch/i386/mach-pc9800/mach_resources.h | 192 ++++++++++++++++++++++++++++++++ arch/i386/mach-pc9800/mach_time.h | 136 ++++++++++++++++++++++
arch/i386/mach-pc9800/mach_traps.h | 27 ++++
arch/i386/mach-pc9800/smpboot_hooks.h | 33 +++++
arch/i386/mach-summit/calibrate_tsc.h | 1
arch/i386/mach-summit/mach_resources.h | 1
arch/i386/mach-summit/mach_time.h | 1
arch/i386/mach-summit/mach_traps.h | 1
arch/i386/mach-visws/calibrate_tsc.h | 1
arch/i386/mach-visws/mach_resources.h | 1
arch/i386/mach-visws/mach_time.h | 1
arch/i386/mach-visws/mach_traps.h | 1
arch/i386/mach-voyager/calibrate_tsc.h | 1
arch/i386/mach-voyager/mach_resources.h | 1
arch/i386/mach-voyager/mach_time.h | 1
arch/i386/mach-voyager/mach_traps.h | 1
29 files changed, 992 insertions(+), 292 deletions(-)
--
Osamu Tomita
[-- Attachment #2: arch-i386.patch --]
[-- Type: text/plain, Size: 52805 bytes --]
diff -urN linux/arch/i386/Makefile linux98/arch/i386/Makefile
--- linux/arch/i386/Makefile Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/Makefile Tue Nov 5 16:35:51 2002
@@ -51,9 +51,13 @@
ifdef CONFIG_VOYAGER
MACHINE := mach-voyager
else
+ifdef CONFIG_PC9800
+MACHINE := mach-pc9800
+else
MACHINE := mach-generic
endif
endif
+endif
ifdef CONFIG_X86_STACK_CHECK
CFLAGS += -p
@@ -73,15 +77,20 @@
CFLAGS += -Iarch/i386/$(MACHINE) -Iarch/i386/mach-defaults
AFLAGS += -Iarch/i386/$(MACHINE) -Iarch/i386/mach-defaults
-makeboot = $(call descend,arch/i386/boot,$(1))
+ifndef CONFIG_PC9800
+ARCHDIR=arch/i386/boot
+else
+ARCHDIR=arch/i386/boot98
+endif
+makeboot = $(call descend,$(ARCHDIR),$(1))
.PHONY: zImage bzImage compressed zlilo bzlilo zdisk bzdisk install \
clean archclean archmrproper
all: bzImage
-BOOTIMAGE=arch/i386/boot/bzImage
-zImage zlilo zdisk: BOOTIMAGE=arch/i386/boot/zImage
+BOOTIMAGE=$(ARCHDIR)/bzImage
+zImage zlilo zdisk: BOOTIMAGE=$(ARCHDIR)/zImage
zImage bzImage: vmlinux
+@$(call makeboot,$(BOOTIMAGE))
diff -urN linux/arch/i386/Kconfig linux98/arch/i386/Kconfig
--- linux/arch/i386/Kconfig Tue Nov 5 10:16:17 2002
+++ linux98/arch/i386/Kconfig Tue Nov 5 17:08:26 2002
@@ -1004,6 +1004,12 @@
# Visual Workstation support is utterly broken.
# If you want to see it working mail an VW540 to hch@infradead.org 8)
#bool 'SGI Visual Workstation support' CONFIG_VISWS
+config PC9800
+ bool "NEC PC-9800 architecture support"
+ help
+ To make kernel for NEC PC-9801/PC-9821 architecture, say Y.
+ If say Y, kernel works -ONLY- on PC-9800 architecture.
+
config X86_VISWS_APIC
bool
depends on VISWS
@@ -1096,7 +1102,7 @@
config EISA
bool "EISA support"
- depends on ISA
+ depends on ISA && !PC9800
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
@@ -1112,7 +1118,7 @@
config MCA
bool "MCA support"
- depends on !VISWS
+ depends on !(VISWS || PC9800)
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
@@ -1460,6 +1466,7 @@
config VGA_CONSOLE
bool "VGA text console"
+ depends on !PC9800
help
Saying Y here will allow you to use Linux in text mode through a
display that complies with the generic VGA standard. Virtually
@@ -1473,6 +1480,7 @@
config VIDEO_SELECT
bool "Video mode selection support"
+ depends on !PC9800
---help---
This enables support for text mode selection on kernel startup. If
you want to take advantage of some high-resolution text mode your
@@ -1486,6 +1494,18 @@
Read the file <file:Documentation/svga.txt> for more information
about the Video mode selection support. If unsure, say N.
+config GDC_CONSOLE
+ bool "PC-9800 GDC text console"
+ depends on PC9800
+ default y
+ help
+ This enables support for PC-9800 standard text mode console.
+ If use PC-9801/PC-9821, Say Y.
+
+config GDC_32BITACCESS
+ bool "Enable 32-bit access to text video RAM"
+ depends on GDC_CONSOLE
+
if EXPERIMENTAL
config MDA_CONSOLE
diff -urN linux/arch/i386/kernel/setup.c linux98/arch/i386/kernel/setup.c
--- linux/arch/i386/kernel/setup.c Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/kernel/setup.c Tue Nov 5 16:28:36 2002
@@ -20,6 +20,7 @@
* This file handles the architecture-dependent parts of initialization
*/
+#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/tty.h>
@@ -40,6 +41,7 @@
#include <asm/setup.h>
#include <asm/arch_hooks.h>
#include "setup_arch_pre.h"
+#include "mach_resources.h"
static inline char * __init machine_specific_memory_setup(void);
@@ -97,98 +99,8 @@
static char command_line[COMMAND_LINE_SIZE];
char saved_command_line[COMMAND_LINE_SIZE];
-struct resource standard_io_resources[] = {
- { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
- { "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
- { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
- { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
- { "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
- { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
- { "fpu", 0xf0, 0xff, IORESOURCE_BUSY }
-};
-#ifdef CONFIG_MELAN
-standard_io_resources[1] = { "pic1", 0x20, 0x21, IORESOURCE_BUSY };
-standard_io_resources[5] = { "pic2", 0xa0, 0xa1, IORESOURCE_BUSY };
-#endif
-
-#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
-
static struct resource code_resource = { "Kernel code", 0x100000, 0 };
static struct resource data_resource = { "Kernel data", 0, 0 };
-static struct resource vram_resource = { "Video RAM area", 0xa0000, 0xbffff, IORESOURCE_BUSY };
-
-/* System ROM resources */
-#define MAXROMS 6
-static struct resource rom_resources[MAXROMS] = {
- { "System ROM", 0xF0000, 0xFFFFF, IORESOURCE_BUSY },
- { "Video ROM", 0xc0000, 0xc7fff, IORESOURCE_BUSY }
-};
-
-#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
-
-static void __init probe_roms(void)
-{
- int roms = 1;
- unsigned long base;
- unsigned char *romstart;
-
- request_resource(&iomem_resource, rom_resources+0);
-
- /* Video ROM is standard at C000:0000 - C7FF:0000, check signature */
- for (base = 0xC0000; base < 0xE0000; base += 2048) {
- romstart = isa_bus_to_virt(base);
- if (!romsignature(romstart))
- continue;
- request_resource(&iomem_resource, rom_resources + roms);
- roms++;
- break;
- }
-
- /* Extension roms at C800:0000 - DFFF:0000 */
- for (base = 0xC8000; base < 0xE0000; base += 2048) {
- unsigned long length;
-
- romstart = isa_bus_to_virt(base);
- if (!romsignature(romstart))
- continue;
- length = romstart[2] * 512;
- if (length) {
- unsigned int i;
- unsigned char chksum;
-
- chksum = 0;
- for (i = 0; i < length; i++)
- chksum += romstart[i];
-
- /* Good checksum? */
- if (!chksum) {
- rom_resources[roms].start = base;
- rom_resources[roms].end = base + length - 1;
- rom_resources[roms].name = "Extension ROM";
- rom_resources[roms].flags = IORESOURCE_BUSY;
-
- request_resource(&iomem_resource, rom_resources + roms);
- roms++;
- if (roms >= MAXROMS)
- return;
- }
- }
- }
-
- /* Final check for motherboard extension rom at E000:0000 */
- base = 0xE0000;
- romstart = isa_bus_to_virt(base);
-
- if (romsignature(romstart)) {
- rom_resources[roms].start = base;
- rom_resources[roms].end = base + 65535;
- rom_resources[roms].name = "Extension ROM";
- rom_resources[roms].flags = IORESOURCE_BUSY;
-
- request_resource(&iomem_resource, rom_resources + roms);
- }
-}
static void __init limit_regions (unsigned long long size)
{
@@ -820,11 +732,8 @@
request_resource(res, &data_resource);
}
}
- request_resource(&iomem_resource, &vram_resource);
- /* request I/O space for devices used on all i[345]86 PCs */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource, standard_io_resources+i);
+ mach_request_resource( );
/* Tell the PCI layer not to allocate too close to the RAM area.. */
low_mem_size = ((max_low_pfn << PAGE_SHIFT) + 0xfffff) & ~0xfffff;
@@ -904,6 +813,8 @@
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
+#elif defined(CONFIG_GDC_CONSOLE)
+ conswitchp = &gdc_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
diff -urN linux/arch/i386/kernel/time.c linux98/arch/i386/kernel/time.c
--- linux/arch/i386/kernel/time.c Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/kernel/time.c Tue Nov 5 16:28:36 2002
@@ -54,12 +54,15 @@
#include <asm/processor.h>
#include <asm/timer.h>
-#include <linux/mc146818rtc.h>
+#include "mach_time.h"
+
#include <linux/timex.h>
#include <linux/config.h>
#include <asm/arch_hooks.h>
+#include "io_ports.h"
+
extern spinlock_t i8259A_lock;
int pit_latch_buggy; /* extern */
@@ -134,69 +137,13 @@
write_unlock_irq(&xtime_lock);
}
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
static int set_rtc_mmss(unsigned long nowtime)
{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
+ int retval;
/* gets recalled with irq locally disabled */
spin_lock(&rtc_lock);
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ retval = mach_set_rtc_mmss(nowtime);
spin_unlock(&rtc_lock);
return retval;
@@ -222,9 +169,9 @@
* on an 82489DX-based system.
*/
spin_lock(&i8259A_lock);
- outb(0x0c, 0x20);
+ outb(0x0c, PIC_MASTER_OCW3);
/* Ack the IRQ; AEOI will end it automatically. */
- inb(0x20);
+ inb(PIC_MASTER_POLL);
spin_unlock(&i8259A_lock);
}
#endif
@@ -238,14 +185,14 @@
*/
if ((time_status & STA_UNSYNC) == 0 &&
xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ (xtime.tv_nsec / 1000) >= TIME1 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= TIME2 + ((unsigned) TICK_SIZE) / 2) {
if (set_rtc_mmss(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
}
-
+
#ifdef CONFIG_MCA
if( MCA_bus ) {
/* The PS/2 uses level-triggered interrupts. You can't
@@ -290,43 +237,15 @@
/* not static: needed by APM */
unsigned long get_cmos_time(void)
{
- unsigned int year, mon, day, hour, min, sec;
- int i;
+ unsigned long retval;
spin_lock(&rtc_lock);
- /* The Linux interpretation of the CMOS clock register contents:
- * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
- * RTC registers show the second which has precisely just started.
- * Let's hope other operating systems interpret the RTC the same way.
- */
- /* read RTC exactly on falling edge of update flag */
- for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
- break;
- for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
- if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
- break;
- do { /* Isn't this overkill ? UIP above should guarantee consistency */
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
+
+ retval = mach_get_cmos_time();
+
spin_unlock(&rtc_lock);
- if ((year += 1900) < 1970)
- year += 100;
- return mktime(year, mon, day, hour, min, sec);
+
+ return retval;
}
/* XXX this driverfs stuff should probably go elsewhere later -john */
diff -urN linux/arch/i386/kernel/timers/timer_pit.c linux98/arch/i386/kernel/timers/timer_pit.c
--- linux/arch/i386/kernel/timers/timer_pit.c Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/kernel/timers/timer_pit.c Tue Nov 5 16:28:36 2002
@@ -15,6 +15,7 @@
extern spinlock_t i8259A_lock;
extern spinlock_t i8253_lock;
#include "do_timer.h"
+#include "io_ports.h"
static int init_pit(void)
{
@@ -63,7 +64,8 @@
{
int count;
- static int count_p = LATCH; /* for the first call after boot */
+ static int count_p;
+ static int is_1st_boot = 1; /* for the first call after boot */
static unsigned long jiffies_p = 0;
/*
@@ -71,12 +73,18 @@
*/
unsigned long jiffies_t;
+ /* for support LATCH is not constant */
+ if (is_1st_boot) {
+ is_1st_boot = 0;
+ count_p = LATCH;
+ }
+
/* gets recalled with irq locally disabled */
spin_lock(&i8253_lock);
/* timer count may underflow right here */
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(0x40); /* read the latched count */
+ count = inb_p(PIT_CH0); /* read the latched count */
/*
* We do this guaranteed double memory access instead of a _p
@@ -84,13 +92,13 @@
*/
jiffies_t = jiffies;
- count |= inb_p(0x40) << 8;
+ count |= inb_p(PIT_CH0) << 8;
/* VIA686a test code... reset the latch if count > max + 1 */
if (count > LATCH) {
- outb_p(0x34, 0x43);
- outb_p(LATCH & 0xff, 0x40);
- outb(LATCH >> 8, 0x40);
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
count = LATCH - 1;
}
diff -urN linux/arch/i386/kernel/timers/timer_tsc.c linux98/arch/i386/kernel/timers/timer_tsc.c
--- linux/arch/i386/kernel/timers/timer_tsc.c Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/kernel/timers/timer_tsc.c Wed Nov 6 21:07:12 2002
@@ -12,6 +12,9 @@
#include <asm/timer.h>
#include <asm/io.h>
+#include "io_ports.h"
+#include "calibrate_tsc.h"
+
extern int x86_udelay_tsc;
extern spinlock_t i8253_lock;
@@ -19,8 +22,6 @@
/* Number of usecs that the last interrupt was delayed */
static int delay_at_last_interrupt;
-static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
-
/* Cached *multiplier* to convert TSC counts to microseconds.
* (see the equation below).
* Equal to 2^32 * (1 / (clocks per usec) ).
@@ -61,7 +62,10 @@
{
int count;
int countmp;
- static int count1=0, count2=LATCH;
+ static int count1=0, count2=0x7fff;
+
+ if (count2 == 0x7fff)
+ count2 = LATCH;
/*
* It is important that these two operations happen almost at
* the same time. We do the RDTSC stuff first, since it's
@@ -79,10 +83,10 @@
rdtscl(last_tsc_low);
spin_lock(&i8253_lock);
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(0x40); /* read the latched count */
- count |= inb(0x40) << 8;
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb(PIT_CH0) << 8;
spin_unlock(&i8253_lock);
if (pit_latch_buggy) {
@@ -104,83 +108,9 @@
}
-/* ------ Calibrate the TSC -------
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-
-#define CALIBRATE_LATCH (5 * LATCH)
-#define CALIBRATE_TIME (5 * 1000020/HZ)
-
static unsigned long __init calibrate_tsc(void)
{
- /* Set the Gate high, disable speaker */
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- /*
- * Now let's take care of CTC channel 2
- *
- * Set the Gate high, program CTC channel 2 for mode 0,
- * (interrupt on terminal count mode), binary count,
- * load 5 * LATCH count, (LSB and MSB) to begin countdown.
- *
- * Some devices need a delay here.
- */
- outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
- outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
- outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
-
- {
- unsigned long startlow, starthigh;
- unsigned long endlow, endhigh;
- unsigned long count;
-
- rdtsc(startlow,starthigh);
- count = 0;
- do {
- count++;
- } while ((inb(0x61) & 0x20) == 0);
- rdtsc(endlow,endhigh);
-
- last_tsc_low = endlow;
-
- /* Error: ECTCNEVERSET */
- if (count <= 1)
- goto bad_ctc;
-
- /* 64-bit subtract - gcc just messes up with long longs */
- __asm__("subl %2,%0\n\t"
- "sbbl %3,%1"
- :"=a" (endlow), "=d" (endhigh)
- :"g" (startlow), "g" (starthigh),
- "0" (endlow), "1" (endhigh));
-
- /* Error: ECPUTOOFAST */
- if (endhigh)
- goto bad_ctc;
-
- /* Error: ECPUTOOSLOW */
- if (endlow <= CALIBRATE_TIME)
- goto bad_ctc;
-
- __asm__("divl %2"
- :"=a" (endlow), "=d" (endhigh)
- :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
-
- return endlow;
- }
-
- /*
- * The CTC wasn't reliable: we got a hit on the very first read,
- * or the CPU was so fast/slow that the quotient wouldn't fit in
- * 32 bits..
- */
-bad_ctc:
- return 0;
+ return mach_calibrate_tsc();
}
diff -urN linux/arch/i386/kernel/traps.c linux98/arch/i386/kernel/traps.c
--- linux/arch/i386/kernel/traps.c Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/kernel/traps.c Tue Nov 5 22:40:55 2002
@@ -49,6 +49,8 @@
#include <linux/irq.h>
#include <linux/module.h>
+#include "mach_traps.h"
+
asmlinkage int system_call(void);
asmlinkage void lcall7(void);
asmlinkage void lcall27(void);
@@ -452,8 +454,7 @@
printk("You probably have a hardware problem with your RAM chips\n");
/* Clear and disable the memory parity error line. */
- reason = (reason & 0xf) | 4;
- outb(reason, 0x61);
+ clear_mem_error(reason);
}
static void io_check_error(unsigned char reason, struct pt_regs * regs)
@@ -490,7 +491,7 @@
static void default_do_nmi(struct pt_regs * regs)
{
- unsigned char reason = inb(0x61);
+ unsigned char reason = get_nmi_reason();
if (!(reason & 0xc0)) {
#if CONFIG_X86_LOCAL_APIC
@@ -514,10 +515,7 @@
* Reassert NMI in case it became active meanwhile
* as it's edge-triggered.
*/
- outb(0x8f, 0x70);
- inb(0x71); /* dummy */
- outb(0x0f, 0x70);
- inb(0x71); /* dummy */
+ reassert_nmi();
}
static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
diff -urN linux/arch/i386/mach-generic/calibrate_tsc.h linux98/arch/i386/mach-generic/calibrate_tsc.h
--- linux/arch/i386/mach-generic/calibrate_tsc.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-generic/calibrate_tsc.h Tue Nov 5 22:15:11 2002
@@ -0,0 +1,90 @@
+/*
+ * arch/i386/mach-generic/calibrate_tsc.h
+ *
+ * Machine specific calibrate_tsc() for generic.
+ * Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _MACH_CALIBRATE_TSC_H
+#define _MACH_CALIBRATE_TSC_H
+
+#define CALIBRATE_LATCH (5 * LATCH)
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+
+static inline unsigned long mach_calibrate_tsc(void)
+{
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Now let's take care of CTC channel 2
+ *
+ * Set the Gate high, program CTC channel 2 for mode 0,
+ * (interrupt on terminal count mode), binary count,
+ * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+ *
+ * Some devices need a delay here.
+ */
+ outb(0xb0, PIT_MODE); /* binary, mode 0, LSB/MSB, Ch 2 */
+ outb(CALIBRATE_LATCH & 0xff, PIT_CH2); /* LSB of count */
+ outb(CALIBRATE_LATCH >> 8, PIT_CH2); /* MSB of count */
+
+ {
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned long count;
+
+ rdtsc(startlow,starthigh);
+ count = 0;
+ do {
+ count++;
+ } while ((inb(0x61) & 0x20) == 0);
+ rdtsc(endlow,endhigh);
+
+ last_tsc_low = endlow;
+
+ /* Error: ECTCNEVERSET */
+ if (count <= 1)
+ goto bad_ctc;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+ }
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#endif /* !_MACH_CALIBRATE_TSC_H */
diff -urN linux/arch/i386/mach-generic/mach_resources.h linux98/arch/i386/mach-generic/mach_resources.h
--- linux/arch/i386/mach-generic/mach_resources.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-generic/mach_resources.h Mon Oct 21 09:59:22 2002
@@ -0,0 +1,113 @@
+/*
+ * arch/i386/mach-generic/mach_resources.h
+ *
+ * Machine specific resource allocation for generic.
+ * Split out from setup.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_RESOURCES_H
+#define _MACH_RESOURCES_H
+
+struct resource standard_io_resources[] = {
+ { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
+ { "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
+ { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
+ { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
+ { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
+ { "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
+ { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
+ { "fpu", 0xf0, 0xff, IORESOURCE_BUSY }
+};
+#ifdef CONFIG_MELAN
+standard_io_resources[1] = { "pic1", 0x20, 0x21, IORESOURCE_BUSY };
+standard_io_resources[5] = { "pic2", 0xa0, 0xa1, IORESOURCE_BUSY };
+#endif
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+static struct resource vram_resource = { "Video RAM area", 0xa0000, 0xbffff, IORESOURCE_BUSY };
+
+/* System ROM resources */
+#define MAXROMS 6
+static struct resource rom_resources[MAXROMS] = {
+ { "System ROM", 0xF0000, 0xFFFFF, IORESOURCE_BUSY },
+ { "Video ROM", 0xc0000, 0xc7fff, IORESOURCE_BUSY }
+};
+
+#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
+
+static inline void probe_roms(void)
+{
+ int roms = 1;
+ unsigned long base;
+ unsigned char *romstart;
+
+ request_resource(&iomem_resource, rom_resources+0);
+
+ /* Video ROM is standard at C000:0000 - C7FF:0000, check signature */
+ for (base = 0xC0000; base < 0xE0000; base += 2048) {
+ romstart = isa_bus_to_virt(base);
+ if (!romsignature(romstart))
+ continue;
+ request_resource(&iomem_resource, rom_resources + roms);
+ roms++;
+ break;
+ }
+
+ /* Extension roms at C800:0000 - DFFF:0000 */
+ for (base = 0xC8000; base < 0xE0000; base += 2048) {
+ unsigned long length;
+
+ romstart = isa_bus_to_virt(base);
+ if (!romsignature(romstart))
+ continue;
+ length = romstart[2] * 512;
+ if (length) {
+ unsigned int i;
+ unsigned char chksum;
+
+ chksum = 0;
+ for (i = 0; i < length; i++)
+ chksum += romstart[i];
+
+ /* Good checksum? */
+ if (!chksum) {
+ rom_resources[roms].start = base;
+ rom_resources[roms].end = base + length - 1;
+ rom_resources[roms].name = "Extension ROM";
+ rom_resources[roms].flags = IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource, rom_resources + roms);
+ roms++;
+ if (roms >= MAXROMS)
+ return;
+ }
+ }
+ }
+
+ /* Final check for motherboard extension rom at E000:0000 */
+ base = 0xE0000;
+ romstart = isa_bus_to_virt(base);
+
+ if (romsignature(romstart)) {
+ rom_resources[roms].start = base;
+ rom_resources[roms].end = base + 65535;
+ rom_resources[roms].name = "Extension ROM";
+ rom_resources[roms].flags = IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource, rom_resources + roms);
+ }
+}
+
+static inline void mach_request_resource(void)
+{
+ int i;
+
+ request_resource(&iomem_resource, &vram_resource);
+
+ /* request I/O space for devices used on all i[345]86 PCs */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources+i);
+
+}
+
+#endif /* !_MACH_RESOURCES_H */
diff -urN linux/arch/i386/mach-generic/mach_time.h linux98/arch/i386/mach-generic/mach_time.h
--- linux/arch/i386/mach-generic/mach_time.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-generic/mach_time.h Mon Oct 21 10:07:35 2002
@@ -0,0 +1,122 @@
+/*
+ * arch/i386/mach-generic/mach_time.h
+ *
+ * Machine specific set RTC function for generic.
+ * Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/mc146818rtc.h>
+
+/* for check timing call set_rtc_mmss() 500ms */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+#define TIME1 500000
+#define TIME2 500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ unsigned char save_control, save_freq_select;
+
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ }
+ CMOS_WRITE(real_seconds,RTC_SECONDS);
+ CMOS_WRITE(real_minutes,RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+ return retval;
+}
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ int i;
+
+ /* The Linux interpretation of the CMOS clock register contents:
+ * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+ * RTC registers show the second which has precisely just started.
+ * Let's hope other operating systems interpret the RTC the same way.
+ */
+ /* read RTC exactly on falling edge of update flag */
+ for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
+ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+ break;
+ for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
+ if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+ break;
+ do { /* Isn't this overkill ? UIP above should guarantee consistency */
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
+ } while (sec != CMOS_READ(RTC_SECONDS));
+ if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ {
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+ }
+ if ((year += 1900) < 1970)
+ year += 100;
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* !_MACH_TIME_H */
diff -urN linux/arch/i386/mach-generic/mach_traps.h linux98/arch/i386/mach-generic/mach_traps.h
--- linux/arch/i386/mach-generic/mach_traps.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-generic/mach_traps.h Tue Nov 5 22:42:05 2002
@@ -0,0 +1,29 @@
+/*
+ * arch/i386/mach-generic/mach_traps.h
+ *
+ * Machine specific NMI handling for generic.
+ * Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+static inline void clear_mem_error(unsigned char reason)
+{
+ reason = (reason & 0xf) | 4;
+ outb(reason, 0x61);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+ return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+ outb(0x8f, 0x70);
+ inb(0x71); /* dummy */
+ outb(0x0f, 0x70);
+ inb(0x71); /* dummy */
+}
+
+#endif /* !_MACH_TRAPS_H */
diff -urN linux/arch/i386/mach-pc9800/calibrate_tsc.h linux98/arch/i386/mach-pc9800/calibrate_tsc.h
--- linux/arch/i386/mach-pc9800/calibrate_tsc.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-pc9800/calibrate_tsc.h Tue Nov 5 22:19:50 2002
@@ -0,0 +1,71 @@
+/*
+ * arch/i386/mach-pc9800/calibrate_tsc.h
+ *
+ * Machine specific calibrate_tsc() for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C.
+ * PC-9800:
+ * CTC cannot be used because some models (especially
+ * note-machines) may disable clock to speaker channel (#1)
+ * unless speaker is enabled. We use ARTIC instead.
+ */
+#ifndef _MACH_CALIBRATE_TSC_H
+#define _MACH_CALIBRATE_TSC_H
+
+#define CALIBRATE_LATCH (5 * 307200/HZ) /* 0.050sec * 307200Hz = 15360 */
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+
+static inline unsigned long mach_calibrate_tsc(void)
+{
+
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned short count;
+
+ for (count = inw(0x5c); inw(0x5c) == count; )
+ ;
+ rdtsc(startlow,starthigh);
+ count = inw(0x5c);
+ while ((unsigned short)(inw(0x5c) - count) < CALIBRATE_LATCH)
+ ;
+ rdtsc(endlow,endhigh);
+
+ last_tsc_low = endlow;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#endif /* !_MACH_CALIBRATE_TSC_H */
diff -urN linux/arch/i386/mach-pc9800/do_timer.h linux98/arch/i386/mach-pc9800/do_timer.h
--- linux/arch/i386/mach-pc9800/do_timer.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-pc9800/do_timer.h Wed Oct 16 13:20:29 2002
@@ -0,0 +1,80 @@
+/* defines for inline arch setup functions */
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs: standard registers from interrupt
+ *
+ * Description:
+ * This hook is called immediately after the timer interrupt is ack'd.
+ * It's primary purpose is to allow architectures that don't possess
+ * individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ * timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ do_timer(regs);
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+ x86_do_profile(regs);
+#else
+ if (!using_apic_timer)
+ smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count: hardware timer interrupt count on overflow
+ *
+ * Description:
+ * This call is invoked when the jiffies count has not incremented but
+ * the hardware timer interrupt has. It means that a timer tick interrupt
+ * came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+ int i;
+
+ spin_lock(&i8259A_lock);
+ /*
+ * This is tricky when I/O APICs are used;
+ * see do_timer_interrupt().
+ */
+ i = inb(0x00);
+ spin_unlock(&i8259A_lock);
+
+ /* assumption about timer being IRQ0 */
+ if (i & 0x01) {
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+#ifdef BUGGY_NEPTUN_TIMER
+ /*
+ * for the Neptun bug we know that the 'latch'
+ * command doesnt latch the high and low value
+ * of the counter atomically. Thus we have to
+ * substract 256 from the counter
+ * ... funny, isnt it? :)
+ */
+
+ count -= 256;
+#else
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+ }
+ return count;
+}
diff -urN linux/arch/i386/mach-pc9800/mach_resources.h linux98/arch/i386/mach-pc9800/mach_resources.h
--- linux/arch/i386/mach-pc9800/mach_resources.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-pc9800/mach_resources.h Sat Oct 26 17:35:19 2002
@@ -0,0 +1,192 @@
+/*
+ * arch/i386/mach-pc9800/mach_resources.h
+ *
+ * Machine specific resource allocation for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_RESOURCES_H
+#define _MACH_RESOURCES_H
+
+static char str_pic1[] = "pic1";
+static char str_dma[] = "dma";
+static char str_pic2[] = "pic2";
+static char str_calender_clock[] = "calender clock";
+static char str_system[] = "system";
+static char str_nmi_control[] = "nmi control";
+static char str_kanji_rom[] = "kanji rom";
+static char str_keyboard[] = "keyboard";
+static char str_text_gdc[] = "text gdc";
+static char str_crtc[] = "crtc";
+static char str_timer[] = "timer";
+static char str_graphic_gdc[] = "graphic gdc";
+static char str_dma_ex_bank[] = "dma ex. bank";
+static char str_beep_freq[] = "beep freq.";
+static char str_mouse_pio[] = "mouse pio";
+struct resource standard_io_resources[] = {
+ { str_pic1, 0x00, 0x00, IORESOURCE_BUSY },
+ { str_dma, 0x01, 0x01, IORESOURCE_BUSY },
+ { str_pic1, 0x02, 0x02, IORESOURCE_BUSY },
+ { str_dma, 0x03, 0x03, IORESOURCE_BUSY },
+ { str_dma, 0x05, 0x05, IORESOURCE_BUSY },
+ { str_dma, 0x07, 0x07, IORESOURCE_BUSY },
+ { str_pic2, 0x08, 0x08, IORESOURCE_BUSY },
+ { str_dma, 0x09, 0x09, IORESOURCE_BUSY },
+ { str_pic2, 0x0a, 0x0a, IORESOURCE_BUSY },
+ { str_dma, 0x0b, 0x0b, IORESOURCE_BUSY },
+ { str_dma, 0x0d, 0x0d, IORESOURCE_BUSY },
+ { str_dma, 0x0f, 0x0f, IORESOURCE_BUSY },
+ { str_dma, 0x11, 0x11, IORESOURCE_BUSY },
+ { str_dma, 0x13, 0x13, IORESOURCE_BUSY },
+ { str_dma, 0x15, 0x15, IORESOURCE_BUSY },
+ { str_dma, 0x17, 0x17, IORESOURCE_BUSY },
+ { str_dma, 0x19, 0x19, IORESOURCE_BUSY },
+ { str_dma, 0x1b, 0x1b, IORESOURCE_BUSY },
+ { str_dma, 0x1d, 0x1d, IORESOURCE_BUSY },
+ { str_dma, 0x1f, 0x1f, IORESOURCE_BUSY },
+ { str_calender_clock, 0x20, 0x20, 0 },
+ { str_dma, 0x21, 0x21, IORESOURCE_BUSY },
+ { str_calender_clock, 0x22, 0x22, 0 },
+ { str_dma, 0x23, 0x23, IORESOURCE_BUSY },
+ { str_dma, 0x25, 0x25, IORESOURCE_BUSY },
+ { str_dma, 0x27, 0x27, IORESOURCE_BUSY },
+ { str_dma, 0x29, 0x29, IORESOURCE_BUSY },
+ { str_dma, 0x2b, 0x2b, IORESOURCE_BUSY },
+ { str_dma, 0x2d, 0x2d, IORESOURCE_BUSY },
+ { str_system, 0x31, 0x31, IORESOURCE_BUSY },
+ { str_system, 0x33, 0x33, IORESOURCE_BUSY },
+ { str_system, 0x35, 0x35, IORESOURCE_BUSY },
+ { str_system, 0x37, 0x37, IORESOURCE_BUSY },
+ { str_nmi_control, 0x50, 0x50, IORESOURCE_BUSY },
+ { str_nmi_control, 0x52, 0x52, IORESOURCE_BUSY },
+ { "time stamp", 0x5c, 0x5f, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa1, 0xa1, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa3, 0xa3, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa5, 0xa5, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa7, 0xa7, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa9, 0xa9, IORESOURCE_BUSY },
+ { str_keyboard, 0x41, 0x41, IORESOURCE_BUSY },
+ { str_keyboard, 0x43, 0x43, IORESOURCE_BUSY },
+ { str_text_gdc, 0x60, 0x60, IORESOURCE_BUSY },
+ { str_text_gdc, 0x62, 0x62, IORESOURCE_BUSY },
+ { str_text_gdc, 0x64, 0x64, IORESOURCE_BUSY },
+ { str_text_gdc, 0x66, 0x66, IORESOURCE_BUSY },
+ { str_text_gdc, 0x68, 0x68, IORESOURCE_BUSY },
+ { str_text_gdc, 0x6a, 0x6a, IORESOURCE_BUSY },
+ { str_text_gdc, 0x6c, 0x6c, IORESOURCE_BUSY },
+ { str_text_gdc, 0x6e, 0x6e, IORESOURCE_BUSY },
+ { str_crtc, 0x70, 0x70, IORESOURCE_BUSY },
+ { str_crtc, 0x72, 0x72, IORESOURCE_BUSY },
+ { str_crtc, 0x74, 0x74, IORESOURCE_BUSY },
+ { str_crtc, 0x74, 0x74, IORESOURCE_BUSY },
+ { str_crtc, 0x76, 0x76, IORESOURCE_BUSY },
+ { str_crtc, 0x78, 0x78, IORESOURCE_BUSY },
+ { str_crtc, 0x7a, 0x7a, IORESOURCE_BUSY },
+ { str_timer, 0x71, 0x71, IORESOURCE_BUSY },
+ { str_timer, 0x73, 0x73, IORESOURCE_BUSY },
+ { str_timer, 0x75, 0x75, IORESOURCE_BUSY },
+ { str_timer, 0x77, 0x77, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa0, 0xa0, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa2, 0xa2, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa4, 0xa4, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa6, 0xa6, IORESOURCE_BUSY },
+ { "cpu", 0xf0, 0xf7, IORESOURCE_BUSY },
+ { "fpu", 0xf8, 0xff, IORESOURCE_BUSY },
+ { str_dma_ex_bank, 0x0e05, 0x0e05, 0 },
+ { str_dma_ex_bank, 0x0e07, 0x0e07, 0 },
+ { str_dma_ex_bank, 0x0e09, 0x0e09, 0 },
+ { str_dma_ex_bank, 0x0e0b, 0x0e0b, 0 },
+ { str_beep_freq, 0x3fd9, 0x3fd9, IORESOURCE_BUSY },
+ { str_beep_freq, 0x3fdb, 0x3fdb, IORESOURCE_BUSY },
+ { str_beep_freq, 0x3fdd, 0x3fdd, IORESOURCE_BUSY },
+ { str_beep_freq, 0x3fdf, 0x3fdf, IORESOURCE_BUSY },
+ /* All PC-9800 have (exactly) one mouse interface. */
+ { str_mouse_pio, 0x7fd9, 0x7fd9, 0 },
+ { str_mouse_pio, 0x7fdb, 0x7fdb, 0 },
+ { str_mouse_pio, 0x7fdd, 0x7fdd, 0 },
+ { str_mouse_pio, 0x7fdf, 0x7fdf, 0 },
+ { "mouse timer", 0xbfdb, 0xbfdb, 0 },
+ { "mouse irq", 0x98d7, 0x98d7, 0 },
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+static struct resource tvram_resource = { "Text VRAM/CG window", 0xa0000, 0xa4fff, IORESOURCE_BUSY };
+static struct resource gvram_brg_resource = { "Graphic VRAM (B/R/G)", 0xa8000, 0xbffff, IORESOURCE_BUSY };
+static struct resource gvram_e_resource = { "Graphic VRAM (E)", 0xe0000, 0xe7fff, IORESOURCE_BUSY };
+
+/* System ROM resources */
+#define MAXROMS 6
+static struct resource rom_resources[MAXROMS] = {
+ { "System ROM", 0xe8000, 0xfffff, IORESOURCE_BUSY }
+};
+
+static inline void probe_roms(void)
+{
+ int roms = 1;
+ int i;
+ __u8 *xrom_id;
+
+ request_resource(&iomem_resource, rom_resources+0);
+
+ xrom_id = (__u8 *) isa_bus_to_virt(PC9800SCA_XROM_ID + 0x10);
+
+ for (i = 0; i < 16; i++) {
+ if (xrom_id[i] & 0x80) {
+ int j;
+
+ for (j = i + 1; j < 16 && (xrom_id[j] & 0x80); j++)
+ ;
+ rom_resources[roms].start = 0x0d0000 + i * 0x001000;
+ rom_resources[roms].end = 0x0d0000 + j * 0x001000 - 1;
+ rom_resources[roms].name = "Extension ROM";
+ rom_resources[roms].flags = IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource,
+ rom_resources + roms);
+ if (++roms >= MAXROMS)
+ return;
+ }
+ }
+}
+
+static inline void mach_request_resource(void)
+{
+ int i;
+
+ if (PC9800_HIGHRESO_P()) {
+ tvram_resource.start = 0xe0000;
+ tvram_resource.end = 0xe4fff;
+ gvram_brg_resource.name = "Graphic VRAM";
+ gvram_brg_resource.start = 0xc0000;
+ gvram_brg_resource.end = 0xdffff;
+ }
+
+ request_resource(&iomem_resource, &tvram_resource);
+ request_resource(&iomem_resource, &gvram_brg_resource);
+ if (!PC9800_HIGHRESO_P())
+ request_resource(&iomem_resource, &gvram_e_resource);
+
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources + i);
+
+ if (PC9800_HIGHRESO_P() || PC9800_9821_P()) {
+ static char graphics[] = "graphics";
+ static struct resource graphics_resources[] = {
+ { graphics, 0x9a0, 0x9a0, 0 },
+ { graphics, 0x9a2, 0x9a2, 0 },
+ { graphics, 0x9a4, 0x9a4, 0 },
+ { graphics, 0x9a6, 0x9a6, 0 },
+ { graphics, 0x9a8, 0x9a8, 0 },
+ { graphics, 0x9aa, 0x9aa, 0 },
+ { graphics, 0x9ac, 0x9ac, 0 },
+ { graphics, 0x9ae, 0x9ae, 0 },
+ };
+
+#define GRAPHICS_RESOURCES (sizeof(graphics_resources)/sizeof(struct resource))
+
+ for (i = 0; i < GRAPHICS_RESOURCES; i++)
+ request_resource(&ioport_resource, graphics_resources + i);
+ }
+}
+
+#endif /* !_MACH_RESOURCES_H */
diff -urN linux/arch/i386/mach-pc9800/mach_time.h linux98/arch/i386/mach-pc9800/mach_time.h
--- linux/arch/i386/mach-pc9800/mach_time.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-pc9800/mach_time.h Mon Oct 21 11:23:06 2002
@@ -0,0 +1,136 @@
+/*
+ * arch/i386/mach-pc9800/mach_time.h
+ *
+ * Machine specific set RTC function for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/upd4990a.h>
+
+/* for check timing call set_rtc_mmss() */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+/*
+ * Because PC-9800's RTC (NEC uPD4990A) does not allow setting
+ * time partially, we always have to read-modify-write the
+ * entire time (including year) so that set_rtc_mmss() will
+ * take quite much time to execute. You may want to relax
+ * RTC resetting interval (currently ~11 minuts)...
+ */
+#define TIME1 1000000
+#define TIME2 0
+
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ struct upd4990a_raw_data data;
+
+ upd4990a_get_time(&data, 1);
+ cmos_minutes = (data.min >> 4) * 10 + (data.min & 0xf);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ u8 temp_seconds = (real_seconds / 10) * 16 + real_seconds % 10;
+ u8 temp_minutes = (real_minutes / 10) * 16 + real_minutes % 10;
+
+ if (data.sec != temp_seconds || data.min != temp_minutes) {
+ data.sec = temp_seconds;
+ data.min = temp_minutes;
+ upd4990a_set_time(&data, 1);
+ }
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* uPD4990A users' manual says we should issue Register Hold
+ * command after reading time, or future Time Read command
+ * may not work. When we have set the time, this also starts
+ * the clock.
+ */
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+
+ return retval;
+}
+
+#define RTC_SANITY_CHECK
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+ int i;
+ u8 prev, cur;
+ unsigned int year;
+#ifdef RTC_SANITY_CHECK
+ int retry_count;
+#endif
+
+ struct upd4990a_raw_data data;
+
+#ifdef RTC_SANITY_CHECK
+ retry_count = 0;
+ retry:
+#endif
+ /* Connect uPD4990A's DATA OUT pin to its 1Hz reference clock. */
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+
+ /* Catch rising edge of reference clock. */
+ prev = ~UPD4990A_READ_DATA();
+ for (i = 0; i < 1800000; i++) { /* may take up to 1 second... */
+ __asm__ ("outb %%al,%0" : : "N" (0x5f)); /* 0.6usec delay */
+ cur = UPD4990A_READ_DATA();
+ if (!(prev & cur & 1))
+ break;
+ prev = ~cur;
+ }
+
+ upd4990a_get_time(&data, 0);
+
+#ifdef RTC_SANITY_CHECK
+# define BCD_VALID_P(x, hi) (((x) & 0x0f) <= 9 && (x) <= 0x ## hi)
+# define DATA ((const unsigned char *) &data)
+
+ if (!BCD_VALID_P(data.sec, 59) ||
+ !BCD_VALID_P(data.min, 59) ||
+ !BCD_VALID_P(data.hour, 23) ||
+ data.mday == 0 || !BCD_VALID_P(data.mday, 31) ||
+ data.wday > 6 ||
+ data.mon < 1 || 12 < data.mon ||
+ !BCD_VALID_P(data.year, 99)) {
+ printk(KERN_ERR "RTC clock data is invalid! "
+ "(%02X %02X %02X %02X %02X %02X) - ",
+ DATA[0], DATA[1], DATA[2], DATA[3], DATA[4], DATA[5]);
+ if (++retry_count < 3) {
+ printk("retrying (%d)\n", retry_count);
+ goto retry;
+ }
+ printk("giving up, continuing\n");
+ }
+
+# undef BCD_VALID_P
+# undef DATA
+#endif /* RTC_SANITY_CHECK */
+
+#define CVT(x) (((x) & 0xF) + ((x) >> 4) * 10)
+ if ((year = CVT(data.year) + 1900) < 1995)
+ year += 100;
+ return mktime(year, data.mon, CVT(data.mday),
+ CVT(data.hour), CVT(data.min), CVT(data.sec));
+#undef CVT
+}
+
+#endif /* !_MACH_TIME_H */
diff -urN linux/arch/i386/mach-pc9800/mach_traps.h linux98/arch/i386/mach-pc9800/mach_traps.h
--- linux/arch/i386/mach-pc9800/mach_traps.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-pc9800/mach_traps.h Tue Nov 5 22:46:55 2002
@@ -0,0 +1,27 @@
+/*
+ * arch/i386/mach-pc9800/mach_traps.h
+ *
+ * Machine specific NMI handling for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+static inline void clear_mem_error(unsigned char reason)
+{
+ outb(0x08, 0x37);
+ outb(0x09, 0x37);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+ return (inb(0x33) & 6) ? 0x80 : 0;
+}
+
+static inline void reassert_nmi(void)
+{
+ outb(0x09, 0x50); /* disable NMI once */
+ outb(0x09, 0x52); /* re-enable it */
+}
+
+#endif /* !_MACH_TRAPS_H */
diff -urN linux/arch/i386/mach-pc9800/smpboot_hooks.h linux98/arch/i386/mach-pc9800/smpboot_hooks.h
--- linux/arch/i386/mach-pc9800/smpboot_hooks.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-pc9800/smpboot_hooks.h Sun Sep 22 06:56:46 2002
@@ -0,0 +1,33 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+ io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(void)
+{
+ /*
+ * Install writable page 0 entry to set BIOS data area.
+ */
+ local_flush_tlb();
+
+ /*
+ * Paranoid: Set warm reset code and vector here back
+ * to default values.
+ */
+ outb(0x0f, 0x37); /* SHUT0 = 1 */
+
+ *((volatile long *) phys_to_virt(0x404)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+ /*
+ * Here we can be sure that there is an IO-APIC in the system. Let's
+ * go and set it up:
+ */
+ if (!skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
+}
diff -urN linux/arch/i386/mach-summit/calibrate_tsc.h linux98/arch/i386/mach-summit/calibrate_tsc.h
--- linux/arch/i386/mach-summit/calibrate_tsc.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-summit/calibrate_tsc.h Mon Oct 21 02:46:34 2002
@@ -0,0 +1 @@
+#include "../mach-generic/calibrate_tsc.h"
diff -urN linux/arch/i386/mach-summit/mach_resources.h linux98/arch/i386/mach-summit/mach_resources.h
--- linux/arch/i386/mach-summit/mach_resources.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-summit/mach_resources.h Sun Oct 20 18:11:27 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_resources.h"
diff -urN linux/arch/i386/mach-summit/mach_time.h linux98/arch/i386/mach-summit/mach_time.h
--- linux/arch/i386/mach-summit/mach_time.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-summit/mach_time.h Sun Oct 20 20:00:44 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_time.h"
diff -urN linux/arch/i386/mach-summit/mach_traps.h linux98/arch/i386/mach-summit/mach_traps.h
--- linux/arch/i386/mach-summit/mach_traps.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-summit/mach_traps.h Mon Oct 21 02:48:48 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_traps.h"
diff -urN linux/arch/i386/mach-visws/calibrate_tsc.h linux98/arch/i386/mach-visws/calibrate_tsc.h
--- linux/arch/i386/mach-visws/calibrate_tsc.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-visws/calibrate_tsc.h Mon Oct 21 02:46:34 2002
@@ -0,0 +1 @@
+#include "../mach-generic/calibrate_tsc.h"
diff -urN linux/arch/i386/mach-visws/mach_resources.h linux98/arch/i386/mach-visws/mach_resources.h
--- linux/arch/i386/mach-visws/mach_resources.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-visws/mach_resources.h Sun Oct 20 18:11:27 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_resources.h"
diff -urN linux/arch/i386/mach-visws/mach_time.h linux98/arch/i386/mach-visws/mach_time.h
--- linux/arch/i386/mach-visws/mach_time.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-visws/mach_time.h Sun Oct 20 20:00:44 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_time.h"
diff -urN linux/arch/i386/mach-visws/mach_traps.h linux98/arch/i386/mach-visws/mach_traps.h
--- linux/arch/i386/mach-visws/mach_traps.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-visws/mach_traps.h Mon Oct 21 02:48:48 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_traps.h"
diff -urN linux/arch/i386/mach-voyager/calibrate_tsc.h linux98/arch/i386/mach-voyager/calibrate_tsc.h
--- linux/arch/i386/mach-voyager/calibrate_tsc.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-voyager/calibrate_tsc.h Mon Oct 21 02:46:34 2002
@@ -0,0 +1 @@
+#include "../mach-generic/calibrate_tsc.h"
diff -urN linux/arch/i386/mach-voyager/mach_resources.h linux98/arch/i386/mach-voyager/mach_resources.h
--- linux/arch/i386/mach-voyager/mach_resources.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-voyager/mach_resources.h Sun Oct 20 18:11:27 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_resources.h"
diff -urN linux/arch/i386/mach-voyager/mach_time.h linux98/arch/i386/mach-voyager/mach_time.h
--- linux/arch/i386/mach-voyager/mach_time.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-voyager/mach_time.h Sun Oct 20 20:00:44 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_time.h"
diff -urN linux/arch/i386/mach-voyager/mach_traps.h linux98/arch/i386/mach-voyager/mach_traps.h
--- linux/arch/i386/mach-voyager/mach_traps.h Thu Jan 1 09:00:00 1970
+++ linux98/arch/i386/mach-voyager/mach_traps.h Mon Oct 21 02:48:48 2002
@@ -0,0 +1 @@
+#include "../mach-generic/mach_traps.h"
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 5/17] support PC-9800 against 2.5.45-ac1 (apm)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (2 preceding siblings ...)
2002-11-06 17:40 ` [PATCHSET 3/17] support PC-9800 against 2.5.45-ac1 (core) Osamu Tomita
@ 2002-11-06 17:52 ` Osamu Tomita
[not found] ` <1036600885.19924.6.camel@localhost.localdomain>
2002-11-06 17:59 ` [PATCHSET 4/17] support PC-9800 against 2.5.45-ac1 (console) Osamu Tomita
` (12 subsequent siblings)
16 siblings, 1 reply; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 17:52 UTC (permalink / raw)
To: Alan Cox, LKML
[-- Attachment #1: Type: text/plain, Size: 108 bytes --]
This patch add APM support for PC-9800.
We need these change according to BIOS difference.
--
Osamu Tomita
[-- Attachment #2: apm.patch --]
[-- Type: text/plain, Size: 5639 bytes --]
diff -urN linux/arch/i386/kernel/apm.c linux98/arch/i386/kernel/apm.c
--- linux/arch/i386/kernel/apm.c Thu Oct 31 13:23:02 2002
+++ linux98/arch/i386/kernel/apm.c Thu Oct 31 13:35:09 2002
@@ -227,6 +227,8 @@
#include <linux/sysrq.h>
+#include "io_ports.h"
+
extern rwlock_t xtime_lock;
extern spinlock_t i8253_lock;
extern unsigned long get_cmos_time(void);
@@ -377,6 +379,15 @@
#define DEFAULT_IDLE_PERIOD (100 / 3)
/*
+ * PC-9800 BIOS reports version by BCD format
+ */
+#ifdef CONFIG_PC9800
+#define BIOS_VERSION_HILO_FMT "%d.%02x"
+#else
+#define BIOS_VERSION_HILO_FMT "%d.%d"
+#endif
+
+/*
* Local variables
*/
static struct {
@@ -629,6 +640,9 @@
__asm__ __volatile__(APM_DO_ZERO_SEGS
"pushl %%edi\n\t"
"pushl %%ebp\n\t"
+#ifdef CONFIG_PC9800
+ "pushfl\n\t"
+#endif
"lcall *%%cs:apm_bios_entry\n\t"
"setc %%al\n\t"
"popl %%ebp\n\t"
@@ -690,6 +704,9 @@
__asm__ __volatile__(APM_DO_ZERO_SEGS
"pushl %%edi\n\t"
"pushl %%ebp\n\t"
+#ifdef CONFIG_PC9800
+ "pushfl\n\t"
+#endif
"lcall *%%cs:apm_bios_entry\n\t"
"setc %%bl\n\t"
"popl %%ebp\n\t"
@@ -961,7 +978,7 @@
/*
* This may be called on an SMP machine.
*/
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && !defined(CONFIG_PC9800)
/* Some bioses don't like being called from CPU != 0 */
if (smp_processor_id() != 0) {
set_cpus_allowed(current, 1 << 0);
@@ -1241,11 +1258,11 @@
{
#ifdef INIT_TIMER_AFTER_SUSPEND
/* set the clock to 100 Hz */
- outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
+ outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
udelay(10);
- outb_p(LATCH & 0xff , 0x40); /* LSB */
+ outb_p(LATCH & 0xff, PIT_CH0); /* LSB */
udelay(10);
- outb(LATCH >> 8 , 0x40); /* MSB */
+ outb(LATCH >> 8, PIT_CH0); /* MSB */
udelay(10);
#endif
}
@@ -1720,7 +1737,8 @@
-1: Unknown
8) min = minutes; sec = seconds */
- p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ p += sprintf(p, "%s " BIOS_VERSION_HILO_FMT
+ " 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
driver_version,
(apm_info.bios.version >> 8) & 0xff,
apm_info.bios.version & 0xff,
@@ -1744,6 +1762,8 @@
char * power_stat;
char * bat_stat;
+#if !defined(CONFIG_PC9800) || !defined(CONFIG_SMP)
+ /* Deamonize causes freeze on PC-9800 SMP box */
kapmd_running = 1;
daemonize();
@@ -1751,6 +1771,7 @@
strcpy(current->comm, "kapmd");
current->flags |= PF_IOTHREAD;
sigfillset(¤t->blocked);
+#endif /* !CONFIG_PC9800 || !CONFIG_SMP */
#ifdef CONFIG_SMP
/* 2002/08/01 - WT
@@ -1780,6 +1801,17 @@
/* Fall back to an APM 1.0 connection. */
apm_info.connection_version = 0x100;
}
+#ifdef CONFIG_PC9800
+ else {
+ printk("PC-9801 APM BIOS BUG work around: "
+ "fix connection_version 0x%x to ",
+ apm_info.connection_version);
+ apm_info.connection_version =
+ (apm_info.connection_version & 0xff00)
+ | ((apm_info.connection_version & 0x00f0) >> 4);
+ printk("0x%x\n", apm_info.connection_version);
+ }
+#endif /* CONFIG_PC9800 */
}
}
@@ -1956,8 +1988,8 @@
printk(KERN_INFO "apm: BIOS not found.\n");
return -ENODEV;
}
- printk(KERN_INFO
- "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
+ printk(KERN_INFO "apm: BIOS version " BIOS_VERSION_HILO_FMT
+ " Flags 0x%02x (Driver version %s)\n",
((apm_info.bios.version >> 8) & 0xff),
(apm_info.bios.version & 0xff),
apm_info.bios.flags,
@@ -1984,6 +2016,11 @@
if (apm_info.bios.version == 0x001)
apm_info.bios.version = 0x100;
+#ifdef CONFIG_PC9800
+ /* In PC-9800, APM BIOS version is written in BCD...?? */
+ apm_info.bios.version = (apm_info.bios.version & 0xff00)
+ | ((apm_info.bios.version & 0x00f0) >> 4);
+#endif
/* BIOS < 1.2 doesn't set cseg_16_len */
if (apm_info.bios.version < 0x102)
apm_info.bios.cseg_16_len = 0; /* 64k */
@@ -2067,7 +2104,11 @@
if (apm_proc)
SET_MODULE_OWNER(apm_proc);
+#if defined(CONFIG_PC9800) && defined(CONFIG_SMP)
+ apm(0);
+#else
kernel_thread(apm, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND | SIGCHLD);
+#endif
if (num_online_cpus() > 1 && !smp ) {
printk(KERN_NOTICE
diff -urN linux/include/linux/apm_bios.h linux98/include/linux/apm_bios.h
--- linux/include/linux/apm_bios.h Wed Aug 28 09:52:31 2002
+++ linux98/include/linux/apm_bios.h Wed Aug 28 13:34:09 2002
@@ -20,6 +20,7 @@
typedef unsigned short apm_eventinfo_t;
#ifdef __KERNEL__
+#include <linux/config.h>
#define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16 (APM_CS + 8)
@@ -60,6 +61,7 @@
/*
* The APM function codes
*/
+#ifndef CONFIG_PC9800
#define APM_FUNC_INST_CHECK 0x5300
#define APM_FUNC_REAL_CONN 0x5301
#define APM_FUNC_16BIT_CONN 0x5302
@@ -80,6 +82,28 @@
#define APM_FUNC_RESUME_TIMER 0x5311
#define APM_FUNC_RESUME_ON_RING 0x5312
#define APM_FUNC_TIMER 0x5313
+#else
+#define APM_FUNC_INST_CHECK 0x9a00
+#define APM_FUNC_REAL_CONN 0x9a01
+#define APM_FUNC_16BIT_CONN 0x9a02
+#define APM_FUNC_32BIT_CONN 0x9a03
+#define APM_FUNC_DISCONN 0x9a04
+#define APM_FUNC_IDLE 0x9a05
+#define APM_FUNC_BUSY 0x9a06
+#define APM_FUNC_SET_STATE 0x9a07
+#define APM_FUNC_ENABLE_PM 0x9a08
+#define APM_FUNC_RESTORE_BIOS 0x9a09
+#define APM_FUNC_GET_STATUS 0x9a3a
+#define APM_FUNC_GET_EVENT 0x9a0b
+#define APM_FUNC_GET_STATE 0x9a0c
+#define APM_FUNC_ENABLE_DEV_PM 0x9a0d
+#define APM_FUNC_VERSION 0x9a3e
+#define APM_FUNC_ENGAGE_PM 0x9a3f
+#define APM_FUNC_GET_CAP 0x9a10
+#define APM_FUNC_RESUME_TIMER 0x9a11
+#define APM_FUNC_RESUME_ON_RING 0x9a12
+#define APM_FUNC_TIMER 0x9a13
+#endif
/*
* Function code for APM_FUNC_RESUME_TIMER
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 4/17] support PC-9800 against 2.5.45-ac1 (console)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (3 preceding siblings ...)
2002-11-06 17:52 ` [PATCHSET 5/17] support PC-9800 against 2.5.45-ac1 (apm) Osamu Tomita
@ 2002-11-06 17:59 ` Osamu Tomita
2002-11-11 17:18 ` Osamu Tomita
2002-11-06 18:06 ` [PATCHSET 6/17] support PC-9800 against 2.5.45-ac1 (network device) Osamu Tomita
` (11 subsequent siblings)
16 siblings, 1 reply; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 17:59 UTC (permalink / raw)
To: Alan Cox, LKML
[-- Attachment #1: Type: text/plain, Size: 120 bytes --]
This patch adds VT console support for PC-9800.
Including Japanese "Kanji" and "kana" letters support.
--
Osamu Tomita
[-- Attachment #2: console.patch --]
[-- Type: text/plain, Size: 40908 bytes --]
diff -urN linux/drivers/char/Makefile linux98/drivers/char/Makefile
--- linux/drivers/char/Makefile Thu Oct 31 13:23:11 2002
+++ linux98/drivers/char/Makefile Thu Oct 31 15:14:04 2002
@@ -5,7 +5,11 @@
#
# This file contains the font map for the default (hardware) font
#
+ifneq ($(CONFIG_PC9800),y)
FONTMAPFILE = cp437.uni
+else
+FONTMAPFILE = pc9800.uni
+endif
obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o eventpoll.o
@@ -14,7 +18,8 @@
export-objs := busmouse.o vt.o generic_serial.o ip2main.o \
ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
- selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o eventpoll.o
+ selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o \
+ eventpoll.o upd4990a.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o consolemap.o consolemap_deftbl.o selection.o keyboard.o
obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
@@ -51,6 +56,7 @@
obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
+obj-$(CONFIG_PC9800_OLDLP)) += lp_old98.o
obj-$(CONFIG_BUSMOUSE) += busmouse.o
obj-$(CONFIG_DTLK) += dtlk.o
@@ -59,6 +65,7 @@
obj-$(CONFIG_SONYPI) += sonypi.o
obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
obj-$(CONFIG_RTC) += rtc.o
+obj-$(CONFIG_RTC98) += upd4990a.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
ifeq ($(CONFIG_PPC),)
diff -urN linux/drivers/char/console_macros.h linux98/drivers/char/console_macros.h
--- linux/drivers/char/console_macros.h Sat Oct 19 13:01:17 2002
+++ linux98/drivers/char/console_macros.h Mon Oct 28 16:53:39 2002
@@ -55,6 +55,10 @@
#define s_reverse (vc_cons[currcons].d->vc_s_reverse)
#define ulcolor (vc_cons[currcons].d->vc_ulcolor)
#define halfcolor (vc_cons[currcons].d->vc_halfcolor)
+#define def_attr (vc_cons[currcons].d->vc_def_attr)
+#define ul_attr (vc_cons[currcons].d->vc_ul_attr)
+#define half_attr (vc_cons[currcons].d->vc_half_attr)
+#define bold_attr (vc_cons[currcons].d->vc_bold_attr)
#define tab_stop (vc_cons[currcons].d->vc_tab_stop)
#define palette (vc_cons[currcons].d->vc_palette)
#define bell_pitch (vc_cons[currcons].d->vc_bell_pitch)
@@ -64,6 +68,16 @@
#define complement_mask (vc_cons[currcons].d->vc_complement_mask)
#define s_complement_mask (vc_cons[currcons].d->vc_s_complement_mask)
#define hi_font_mask (vc_cons[currcons].d->vc_hi_font_mask)
+#define kanji_mode (vc_cons[currcons].d->vc_kanji_mode)
+#define s_kanji_mode (vc_cons[currcons].d->vc_s_kanji_mode)
+#define kanji_char1 (vc_cons[currcons].d->vc_kanji_char1)
+#define translate_ex (vc_cons[currcons].d->vc_translate_ex)
+#define G0_charset_ex (vc_cons[currcons].d->vc_G0_charset_ex)
+#define G1_charset_ex (vc_cons[currcons].d->vc_G1_charset_ex)
+#define saved_G0_ex (vc_cons[currcons].d->vc_saved_G0_ex)
+#define saved_G1_ex (vc_cons[currcons].d->vc_saved_G1_ex)
+#define kanji_jis_mode (vc_cons[currcons].d->vc_kanji_jis_mode)
+#define s_kanji_jis_mode (vc_cons[currcons].d->vc_s_kanji_jis_mode)
#define vcmode (vt_cons[currcons]->vc_mode)
diff -urN linux/drivers/char/console_pc9800.h linux98/drivers/char/console_pc9800.h
--- linux/drivers/char/console_pc9800.h Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/console_pc9800.h Mon Oct 28 11:48:10 2002
@@ -0,0 +1,14 @@
+#ifndef __CONSOLE_PC9800_H
+#define __CONSOLE_PC9800_H
+
+#define BLANK_ATTR 0x00E1
+
+#define JIS_CODE 0x01
+#define EUC_CODE 0x00
+#define SJIS_CODE 0x02
+#define JIS_CODE_ASCII 0x00
+#define JIS_CODE_78 0x01
+#define JIS_CODE_83 0x02
+#define JIS_CODE_90 0x03
+
+#endif /* __CONSOLE_PC9800_H */
diff -urN linux/drivers/char/consolemap.c linux98/drivers/char/consolemap.c
--- linux/drivers/char/consolemap.c Sat Oct 19 13:02:27 2002
+++ linux98/drivers/char/consolemap.c Mon Oct 21 13:18:03 2002
@@ -22,7 +22,7 @@
#include <linux/console_struct.h>
#include <linux/vt_kern.h>
-static unsigned short translations[][256] = {
+unsigned short translations[][256] = {
/* 8-bit Latin-1 mapped to Unicode -- trivial mapping */
{
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
@@ -162,7 +162,59 @@
0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef,
0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7,
0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff
- }
+ },
+ /* JIS X0201 mapped to Unicode */
+ /* code marked with ** is not defined in JIS X0201.
+ So 0x00 - 0x1f are mapped to same to Laten1,
+ and others are mapped to PC-9800 internal font# directry */
+ {
+ 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
+/* ** ** ** ** ** ** ** ** */
+ 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
+/* ** ** ** ** ** ** ** ** */
+ 0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
+/* ** ** ** ** ** ** ** ** */
+ 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f,
+/* ** ** ** ** ** ** ** ** */
+ 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027,
+ 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
+ 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037,
+ 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f,
+ 0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047,
+ 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
+ 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057,
+ 0x0058, 0x0059, 0x005a, 0x005b, 0x00a5, 0x005d, 0x005e, 0x005f,
+ 0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067,
+ 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f,
+ 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077,
+ 0x0078, 0x0079, 0x007a, 0x007b, 0x007c, 0x007d, 0x203e, 0xf07f,
+/* ** */
+ 0xf080, 0xf081, 0xf082, 0xf083, 0xf084, 0xf085, 0xf086, 0xf087,
+/* ** ** ** ** ** ** ** ** */
+ 0xf088, 0xf089, 0xf08a, 0xf08b, 0xf08c, 0xf08d, 0xf08e, 0xf08f,
+/* ** ** ** ** ** ** ** ** */
+ 0xf090, 0xf091, 0xf092, 0xf093, 0xf094, 0xf095, 0xf096, 0xf097,
+/* ** ** ** ** ** ** ** ** */
+ 0xf098, 0xf099, 0xf09a, 0xf09b, 0xf09c, 0xf09d, 0xf09e, 0xf09f,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0a0, 0xff61, 0xff62, 0xff63, 0xff64, 0xff65, 0xff66, 0xff67,
+/* ** */
+ 0xff68, 0xff69, 0xff6a, 0xff6b, 0xff6c, 0xff6d, 0xff6e, 0xff6f,
+ 0xff70, 0xff71, 0xff72, 0xff73, 0xff74, 0xff75, 0xff76, 0xff77,
+ 0xff78, 0xff79, 0xff7a, 0xff7b, 0xff7c, 0xff7d, 0xff7e, 0xff7f,
+ 0xff80, 0xff81, 0xff82, 0xff83, 0xff84, 0xff85, 0xff86, 0xff87,
+ 0xff88, 0xff89, 0xff8a, 0xff8b, 0xff8c, 0xff8d, 0xff8e, 0xff8f,
+ 0xff90, 0xff91, 0xff92, 0xff93, 0xff94, 0xff95, 0xff96, 0xff97,
+ 0xff98, 0xff99, 0xff9a, 0xff9b, 0xff9c, 0xff9d, 0xff9e, 0xff9f,
+ 0xf0e0, 0xf0e1, 0xf0e2, 0xf0e3, 0xf0e4, 0xf0e5, 0xf0e6, 0xf0e7,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff
+/* ** ** ** ** ** ** ** ** */
+ },
};
/* The standard kernel character-to-font mappings are not invertible
@@ -176,7 +228,7 @@
u16 **uni_pgdir[32];
unsigned long refcount;
unsigned long sum;
- unsigned char *inverse_translations[4];
+ unsigned char *inverse_translations[5];
int readonly;
};
diff -urN linux/drivers/char/pc9800.uni linux98/drivers/char/pc9800.uni
--- linux/drivers/char/pc9800.uni Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/pc9800.uni Fri Aug 17 21:50:17 2001
@@ -0,0 +1,260 @@
+#
+# Unicode table for PC-9800 console.
+# Copyright (C) 1998,2001 Linux/98 project (project Seraphim)
+# Kyoto University Microcomputer Club (KMC).
+#
+
+# Kore ha unicode wo 98 no ROM no font ni taio saseru tame no
+# map desu.
+
+# Characters for control codes.
+# PC-9800 uses 2-char sequences while Unicode uses 3-char for some codes.
+0x00
+0x01 U+2401 # SH / SOH
+0x02 U+2402 # SX / SOX
+0x03 U+2403 # EX / ETX
+0x04 U+2404 # ET / EOT
+0x05 U+2405 # EQ / ENQ
+0x06 U+2406 # AK / ACK
+0x07 U+2407 # BL / BEL
+0x08 U+2408 # BS
+0x09 U+2409 # HT
+0x0a U+240a # LF
+0x0b # HM / (VT)
+0x0c # CL / (FF)
+0x0d U+240d # CR
+0x0e # SO / (SS)
+0x0f U+240f # SI
+0x10 U+2410 # DE / DLE
+0x11 U+2411 # D1 / DC1
+0x12 U+2412 # D2 / DC2
+0x13 U+2413 # D3 / DC3
+0x14 U+2414 # D4 / DC4
+0x15 U+2415 # NK / NAK
+0x16 U+2416 # SN / SYN
+0x17 U+2417 # EB / ETB
+0x18 U+2418 # CN / CAN
+0x19 U+2419 # EM
+0x1a U+241a # SB / SUB
+0x1b U+241b # EC / ESC
+
+# arrow
+0x1c U+2192 U+ffeb # right
+0x1d U+2190 U+ffe9 # left
+0x1e U+2191 U+ffea # up
+0x1f U+2193 U+ffec # down
+
+#
+# The ASCII range is identity-mapped, but some of the characters also
+# have to act as substitutes, especially the upper-case characters.
+#
+0x20 U+0020
+0x21 U+0021
+# U+00a8 is Latin-1 Supplement DIAELESIS.
+0x22 U+0022 U+00a8
+0x23 U+0023
+0x24 U+0024
+0x25 U+0025
+0x26 U+0026
+0x26 U+2019 # General Punctuation "RIGHT SINGLE QUOTATION MARK"
+0x27 U+0027 U+2032
+0x28 U+0028
+0x29 U+0029
+0x2a U+002a
+0x2b U+002b
+# U+00b8 is Latin-1 Supplement CEDILLA.
+0x2c U+002c U+00b8
+# U+00b8 is Latin-1 Supplement SOFT HYPHEN.
+0x2d U+002d U+00ad
+0x2d U+2212 # Mathematical Operators "MINUS SIGN"
+0x2e U+002e
+0x2f U+002f
+0x2f U+2044 # General Punctuation "FRACTION SLASH"
+0x2f U+2215 # Mathematical Operators "DIVISION SLASH"
+0x30 U+0030
+0x31 U+0031
+0x32 U+0032
+0x33 U+0033
+0x34 U+0034
+0x35 U+0035
+0x36 U+0036
+0x37 U+0037
+0x38 U+0038
+0x39 U+0039
+0x3a U+003a
+0x3a U+003a # Mathematical Operators "RATIO"
+0x3b U+003b
+0x3c U+003c
+0x3d U+003d
+0x3e U+003e
+0x3f U+003f
+0x40 U+0040
+0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
+0x42 U+0042
+# U+00a9 is Latin-1 Supplement COPYRIGHT SIGN.
+0x43 U+0043 U+00a9
+0x44 U+0044
+0x45 U+0045 U+00c8 U+00ca U+00cb
+0x46 U+0046
+0x47 U+0047
+0x48 U+0048
+0x49 U+0049 U+00cc U+00cd U+00ce U+00cf
+0x4a U+004a
+# U+212a: Letterlike Symbols "KELVIN SIGN"
+0x4b U+004b U+212a
+0x4c U+004c
+0x4d U+004d
+0x4e U+004e
+0x4f U+004f U+00d2 U+00d3 U+00d4 U+00d5
+0x50 U+0050
+0x51 U+0051
+# U+00ae: Latin-1 Supplement "REGISTERED SIGN"
+0x52 U+0052 U+00ae
+0x53 U+0053
+0x54 U+0054
+0x55 U+0055 U+00d9 U+00da U+00db
+0x56 U+0056
+0x57 U+0057
+0x58 U+0058
+0x59 U+0059 U+00dd
+0x5a U+005a
+0x5b U+005b
+0x5c U+00a5 # Latin-1 Supplement "YEN SIGN"
+0x5d U+005d
+0x5e U+005e
+0x5f U+005f U+f804
+0x60 U+0060 U+2035
+0x61 U+0061 U+00e3
+0x62 U+0062
+0x63 U+0063
+0x64 U+0064
+0x65 U+0065
+0x66 U+0066
+0x67 U+0067
+0x68 U+0068
+0x69 U+0069
+0x6a U+006a
+0x6b U+006b
+0x6c U+006c
+0x6d U+006d
+0x6e U+006e
+0x6f U+006f U+00f5
+0x70 U+0070
+0x71 U+0071
+0x72 U+0072
+0x73 U+0073
+0x74 U+0074
+0x75 U+0075
+0x76 U+0076
+0x77 U+0077
+0x78 U+0078 U+00d7
+0x79 U+0079 U+00fd
+0x7a U+007a
+0x7b U+007b
+# U+00a6: Latin-1 Supplement "BROKEN (VERTICAL) BAR"
+0x7c U+007c U+00a6
+0x7d U+007d
+0x7e U+007e
+
+# kuhaku
+0x7f # U+2302
+
+# Block Elements.
+0x80 U+2581 # LOWER ONE EIGHTH BLOCK
+0x81 U+2582 # LOWER ONE QUARTER BLOCK
+0x82 U+2583 # LOWER THREE EIGHTHS BLOCK
+0x83 U+2584 # LOWER HALF BLOCK
+0x84 U+2585 # LOWER FIVE EIGHTHS BLOCK
+0x85 U+2586 # LOWER THREE QUARTERS BLOCK
+0x86 U+2587 # LOWER SEVEN EIGHTHS BLOCK
+0x87 U+2588 # FULL BLOCK
+0x88 U+258f # LEFT ONE EIGHTH BLOCK
+0x89 U+258e # LEFT ONE QUARTER BLOCK
+0x8a U+258d # LEFT THREE EIGHTHS BLOCK
+0x8b U+258c # LEFT HALF BLOCK
+0x8c U+258b # LEFT FIVE EIGHTHS BLOCK
+0x8d U+258a # LEFT THREE QUARTERS BLOCK
+0x8e U+2589 # LEFT SEVEN EIGHTHS BLOCK
+
+# Box Drawing.
+0x8f U+253c
+0x90 U+2534
+0x91 U+252c
+0x92 U+2524
+0x93 U+251c
+0x94 U+203e # General Punctuation "OVERLINE" (= "SPACING OVERSCORE")
+0x95 U+2500 # Box Drawing "BOX DRAWING LIGHT HORIZONTAL"
+0x96 U+2502 # Box Drawing "BOX DRAWING LIGHT VERTICAL"
+0x96 U+ffe8 # Halfwidth symbol variants "HALFWIDTH FORMS LIGHT VERTICAL"
+0x97 U+2595 # Block Elements "RIGHT ONE EIGHTH BLOCK"
+0x98 U+250c
+0x99 U+2510
+0x9a U+2514
+0x9b U+2518
+
+0x9c U+256d # "BOX DRAWING LIGHT ARC DOWN AND RIGHT"
+0x9d U+256e # "BOX DRAWING LIGHT ARC DOWN AND LEFT"
+0x9e U+2570 # "BOX DRAWING LIGHT ARC UP AND RIGHT"
+0x9f U+256f # "BOX DRAWING LIGHT ARC UP AND LEFT"
+
+0xa0 # another whitespace
+
+# Halfwidth CJK punctuation
+0xa1 - 0xa4 U+ff61 - U+ff64
+
+# Halfwidth Katakana variants
+0xa5 - 0xdf U+ff65 - U+ff9f
+0xa5 U+00b7 # Latin-1 Supplement "MIDDLE DOT"
+0xdf U+00b0 # Latin-1 Supplement "DEGREE SIGN"
+
+# Box Drawing
+0xe0 U+2550 # "BOX DRAWING DOUBLE HORIZONTAL"
+0xe1 U+255e # "BOX DRAWING VERTICAL SINGLE AND RIGHT DOUBLE"
+0xe2 U+256a # "BOX DRAWING VERTICAL SINGLE AND HORIZONTAL DOUBLE"
+0xe3 U+2561 # "BOX DRAWING VERTICAL SINGLE AND LEFT DOUBLE"
+
+# Geometric Shapes
+0xe4 U+25e2 # "BLACK LOWER RIGHT TRIANGLE"
+0xe5 U+25e3 # "BLACK LOWER LEFT TRIANGLE"
+0xe6 U+25e5 # "BLACK UPPER RIGHT TRIANGLE"
+0xe7 U+25e4 # "BLACK UPPER LEFT TRIANGLE"
+
+# Playing card symbols
+0xe8 U+2660 # "BLACK SPADE SUIT"
+0xe9 U+2665 # "BLACK HEART SUIT"
+0xea U+2666 # "BLACK DIAMOND SUIT"
+0xeb U+2663 # "BLACK CLUB SUIT"
+
+# Geometric Shapes
+0xec U+25cf # "BLACK CIRCLE"
+0xed U+25cb U+25ef # "WHITE CIRCLE", "LARGE CIRCLE"
+
+# Box Drawing
+0xee U+2571 # "BOX DRAWING LIGHT DIAGONAL UPPER RIGHT TO LOWER LEFT"
+0xef U+2572 # "BOX DRAWING LIGHT DIAGONAL UPPER LEFT TO LOWER RIGHT"
+0xf0 U+2573 # "BOX DRAWING LIGHT DIAGONAL CROSS"
+
+# CJK Unified Ideographs (XXX - should these be here?)
+0xf1 U+5186
+0xf2 U+5e74
+0xf3 U+6708
+0xf4 U+65e5
+0xf5 U+6642
+0xf6 U+5206
+0xf7 U+79d2
+
+# unassigned
+0xf8
+0xf9
+0xfa
+0xfb
+
+0xfc U+005c # "REVERSE SOLIDUS" / "BACKSLASH"
+0xfc U+2216 # Mathematical Operators "SET MINUS"
+
+# unassigned
+0xfd
+0xfe
+0xff
+
+# End of pc9800.uni
diff -urN linux/drivers/char/vt.c linux98/drivers/char/vt.c
--- linux/drivers/char/vt.c Thu Oct 31 09:43:39 2002
+++ linux98/drivers/char/vt.c Wed Nov 6 00:11:58 2002
@@ -108,6 +108,11 @@
#include "console_macros.h"
+#ifdef CONFIG_PC9800
+#include "console_pc9800.h"
+extern unsigned short translations[][256];
+#define CONFIG_KANJI
+#endif
const struct consw *conswitchp;
@@ -143,6 +148,10 @@
static void blank_screen(unsigned long dummy);
static void gotoxy(int currcons, int new_x, int new_y);
static void save_cur(int currcons);
+#ifdef CONFIG_KANJI
+static void save_cur_kanji(int currcons);
+static void restore_cur_kanji(int currcons);
+#endif
static void reset_terminal(int currcons, int do_clear);
static void con_flush_chars(struct tty_struct *tty);
static void set_vesa_blanking(unsigned long arg);
@@ -203,6 +212,11 @@
static struct timer_list console_timer;
/*
+ * Whether PC-9800 or not
+ */
+extern int pc98;
+
+/*
* Low-Level Functions
*/
@@ -293,7 +307,7 @@
xx = nxx; yy = nyy;
}
for(;;) {
- u16 attrib = scr_readw(p) & 0xff00;
+ vram_char_t attrib = scr_readw(p) & 0xff00;
int startx = xx;
u16 *q = p;
while (xx < video_num_columns && count) {
@@ -379,6 +393,8 @@
{
attr = build_attr(currcons, color, intensity, blink, underline, reverse ^ decscnm);
video_erase_char = (build_attr(currcons, color, 1, blink, 0, decscnm) << 8) | ' ';
+ if (pc98 && decscnm)
+ video_erase_char |= 0x0400; /* reverse */
}
/* Note: inverting the screen twice should revert to the original state */
@@ -395,7 +411,7 @@
else {
u16 *q = p;
int cnt = count;
- u16 a;
+ vram_char_t a;
if (!can_do_color) {
while (cnt--) {
@@ -425,11 +441,30 @@
do_update_region(currcons, (unsigned long) p, count);
}
+#ifdef CONFIG_KANJI
+/* can called form keyboard.c */
+void do_change_kanji_mode(int currcons, unsigned long mode)
+{
+ switch (mode) {
+ case 0:
+ kanji_mode = EUC_CODE;
+ break;
+ case 1:
+ kanji_mode = JIS_CODE;
+ break;
+ case 2:
+ kanji_mode = SJIS_CODE;
+ break;
+ }
+ kanji_char1 = 0;
+}
+#endif /* CONFIG_KANJI */
+
/* used by selection: complement pointer position */
void complement_pos(int currcons, int offset)
{
static unsigned short *p;
- static unsigned short old;
+ static vram_char_t old;
static unsigned short oldx, oldy;
if (p) {
@@ -440,10 +475,15 @@
if (offset == -1)
p = NULL;
else {
- unsigned short new;
+ vram_char_t new;
p = screenpos(currcons, offset, 1);
old = scr_readw(p);
+#ifndef CONFIG_FB_EGC
new = old ^ complement_mask;
+#else
+ new = (old & 0xff0000ff) | ((old & 0xf000) >> 4)
+ | ((old & 0xf00) << 4);
+#endif
scr_writew(new, p);
if (DO_UPDATE) {
oldx = (offset >> 1) % video_num_columns;
@@ -502,7 +542,7 @@
static void add_softcursor(int currcons)
{
- int i = scr_readw((u16 *) pos);
+ vram_char_t i = scr_readw((u16 *) pos);
u32 type = cursor_type;
if (! (type & 0x10)) return;
@@ -639,7 +679,10 @@
can_do_color = 0;
sw->con_init(vc_cons[currcons].d, init);
if (!complement_mask)
- complement_mask = can_do_color ? 0x7700 : 0x0800;
+ if (pc98)
+ complement_mask = 0x0400;
+ else
+ complement_mask = can_do_color ? 0x7700 : 0x0800;
s_complement_mask = complement_mask;
video_size_row = video_num_columns<<1;
screenbuf_size = video_num_lines*video_size_row;
@@ -671,7 +714,7 @@
visual_init(currcons, 1);
if (!*vc_cons[currcons].d->vc_uni_pagedir_loc)
con_set_default_unimap(currcons);
- q = (long)kmalloc(screenbuf_size, GFP_KERNEL);
+ q = (long)kmalloc(screenbuf_size + (pc98 ? screenbuf_size : 0), GFP_KERNEL);
if (!q) {
kfree((char *) p);
vc_cons[currcons].d = NULL;
@@ -713,7 +756,7 @@
(cc == video_num_columns && ll == video_num_lines))
newscreens[currcons] = NULL;
else {
- unsigned short *p = (unsigned short *) kmalloc(ss, GFP_USER);
+ unsigned short *p = (unsigned short *)kmalloc(ss + (pc98 ? ss : 0), GFP_USER);
if (!p) {
for (i = first; i < currcons; i++)
if (newscreens[i])
@@ -1077,6 +1120,9 @@
translate = set_translate(charset == 0
? G0_charset
: G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = (charset == 0 ? G0_charset_ex : G1_charset_ex);
+#endif
disp_ctrl = 0;
toggle_meta = 0;
break;
@@ -1085,6 +1131,9 @@
* chars < 32 be displayed as ROM chars.
*/
translate = set_translate(IBMPC_MAP,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = 0;
+#endif
disp_ctrl = 1;
toggle_meta = 0;
break;
@@ -1093,6 +1142,9 @@
* high bit before displaying as ROM char.
*/
translate = set_translate(IBMPC_MAP,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = 0;
+#endif
disp_ctrl = 1;
toggle_meta = 1;
break;
@@ -1253,6 +1305,10 @@
/* console_sem is held */
static void setterm_command(int currcons)
{
+ if (sw->con_setterm_command
+ && sw->con_setterm_command(vc_cons[currcons].d))
+ return;
+
switch(par[0]) {
case 1: /* set color for underline mode */
if (can_do_color && par[1] < 16) {
@@ -1302,6 +1358,22 @@
case 14: /* set vesa powerdown interval */
vesa_off_interval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ;
break;
+#ifdef CONFIG_KANJI
+ case 98:
+ if (par[1] < 10) /* change kanji mode */
+ do_change_kanji_mode(currcons, par[1]); /* 0208 */
+ else if (par[1] == 10) { /* save restore kanji mode */
+ switch (par[2]) {
+ case 1:
+ save_cur_kanji(currcons);
+ break;
+ case 2:
+ restore_cur_kanji(currcons);
+ break;
+ }
+ }
+ break;
+#endif /* CONFIG_KANJI */
}
}
@@ -1379,8 +1451,26 @@
need_wrap = 0;
}
+#ifdef CONFIG_KANJI
+static void save_cur_kanji(int currcons)
+{
+ s_kanji_mode = kanji_mode;
+ s_kanji_jis_mode = kanji_jis_mode;
+}
+
+static void restore_cur_kanji(int currcons)
+{
+ kanji_mode = s_kanji_mode;
+ kanji_jis_mode = s_kanji_jis_mode;
+ kanji_char1 = 0;
+}
+#endif
+
enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey,
EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd,
+#ifdef CONFIG_KANJI
+ ESsetJIS, ESsetJIS2,
+#endif
ESpalette };
/* console_sem is held (except via vc_init()) */
@@ -1390,9 +1480,18 @@
bottom = video_num_lines;
vc_state = ESnormal;
ques = 0;
+#ifndef CONFIG_KANJI
translate = set_translate(LAT1_MAP,currcons);
G0_charset = LAT1_MAP;
G1_charset = GRAF_MAP;
+#else
+ translate = set_translate(JP_MAP, currcons);
+ translate_ex = 0;
+ G0_charset = JP_MAP;
+ G0_charset_ex = 0;
+ G1_charset = GRAF_MAP;
+ G1_charset_ex = 0;
+#endif
charset = 0;
need_wrap = 0;
report_mouse = 0;
@@ -1434,6 +1533,12 @@
bell_pitch = DEFAULT_BELL_PITCH;
bell_duration = DEFAULT_BELL_DURATION;
+#ifdef CONFIG_KANJI
+ kanji_mode = EUC_CODE;
+ kanji_char1 = 0;
+ kanji_jis_mode = JIS_CODE_ASCII;
+#endif
+
gotoxy(currcons,0,0);
save_cur(currcons);
if (do_clear)
@@ -1476,11 +1581,17 @@
case 14:
charset = 1;
translate = set_translate(G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G1_charset_ex;
+#endif
disp_ctrl = 1;
return;
case 15:
charset = 0;
translate = set_translate(G0_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G0_charset_ex;
+#endif
disp_ctrl = 0;
return;
case 24: case 26:
@@ -1537,6 +1648,11 @@
case ')':
vc_state = ESsetG1;
return;
+#ifdef CONFIG_KANJI
+ case '$':
+ vc_state = ESsetJIS;
+ return;
+#endif
case '#':
vc_state = EShash;
return;
@@ -1786,8 +1902,25 @@
G0_charset = IBMPC_MAP;
else if (c == 'K')
G0_charset = USER_MAP;
- if (charset == 0)
+#ifdef CONFIG_KANJI
+ G0_charset_ex = 0;
+ if (c == 'J')
+ G0_charset = JP_MAP;
+ else if (c == 'I'){
+ G0_charset = JP_MAP;
+ G0_charset_ex = 1;
+ }
+#endif /* CONFIG_KANJI */
+ if (charset == 0) {
translate = set_translate(G0_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G0_charset_ex;
+#endif
+ }
+#ifdef CONFIG_KANJI
+ kanji_jis_mode = JIS_CODE_ASCII;
+ kanji_char1 = 0;
+#endif
vc_state = ESnormal;
return;
case ESsetG1:
@@ -1799,10 +1932,51 @@
G1_charset = IBMPC_MAP;
else if (c == 'K')
G1_charset = USER_MAP;
- if (charset == 1)
+#ifdef CONFIG_KANJI
+ G1_charset_ex = 0;
+ if (c == 'J')
+ G1_charset = JP_MAP;
+ else if (c == 'I') {
+ G1_charset = JP_MAP;
+ G1_charset_ex = 1;
+ }
+#endif /* CONFIG_KANJI */
+ if (charset == 1) {
translate = set_translate(G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G1_charset_ex;
+#endif
+ }
+#ifdef CONFIG_KANJI
+ kanji_jis_mode = JIS_CODE_ASCII;
+ kanji_char1 = 0;
+#endif
+ vc_state = ESnormal;
+ return;
+#ifdef CONFIG_KANJI
+ case ESsetJIS:
+ if (c == '@')
+ kanji_jis_mode = JIS_CODE_78;
+ else if (c == 'B')
+ kanji_jis_mode = JIS_CODE_83;
+ else if (c == '('){
+ vc_state = ESsetJIS2;
+ return;
+ } else {
+ vc_state = ESnormal;
+ return;
+ }
+ vc_state = ESnormal;
+ kanji_char1 = 0;
+ return;
+ case ESsetJIS2:
+ if (c == 'D'){
+ kanji_jis_mode = JIS_CODE_90;
+ kanji_char1 = 0;
+ }
vc_state = ESnormal;
return;
+#endif /* CONIFG_KANJI */
default:
vc_state = ESnormal;
}
@@ -1834,7 +2008,7 @@
}
#endif
- int c, tc, ok, n = 0, draw_x = -1;
+ int c, tc = 0, ok, n = 0, draw_x = -1;
unsigned int currcons;
unsigned long draw_from = 0, draw_to = 0;
struct vt_struct *vt = (struct vt_struct *)tty->driver_data;
@@ -1891,48 +2065,151 @@
hide_cursor(currcons);
while (!tty->stopped && count) {
+ int realkanji = 0;
+ int kanjioverrun = 0;
c = *buf;
buf++;
n++;
count--;
- if (utf) {
- /* Combine UTF-8 into Unicode */
- /* Incomplete characters silently ignored */
- if(c > 0x7f) {
- if (utf_count > 0 && (c & 0xc0) == 0x80) {
- utf_char = (utf_char << 6) | (c & 0x3f);
- utf_count--;
- if (utf_count == 0)
- tc = c = utf_char;
- else continue;
- } else {
- if ((c & 0xe0) == 0xc0) {
- utf_count = 1;
- utf_char = (c & 0x1f);
- } else if ((c & 0xf0) == 0xe0) {
- utf_count = 2;
- utf_char = (c & 0x0f);
- } else if ((c & 0xf8) == 0xf0) {
- utf_count = 3;
- utf_char = (c & 0x07);
- } else if ((c & 0xfc) == 0xf8) {
- utf_count = 4;
- utf_char = (c & 0x03);
- } else if ((c & 0xfe) == 0xfc) {
- utf_count = 5;
- utf_char = (c & 0x01);
- } else
- utf_count = 0;
- continue;
- }
- } else {
- tc = c;
- utf_count = 0;
- }
- } else { /* no utf */
- tc = translate[toggle_meta ? (c|0x80) : c];
- }
+#ifdef CONFIG_KANJI
+ if (vc_state == ESnormal && !disp_ctrl) {
+ switch (kanji_jis_mode) {
+ case JIS_CODE_78:
+ case JIS_CODE_83:
+ case JIS_CODE_90:
+ if (utf)
+ break;
+ if (c >= 127 || c <= 0x20) {
+ kanji_char1 = 0;
+ break;
+ }
+ if (kanji_char1) {
+ tc = (((unsigned int)kanji_char1) << 8) |
+ (((unsigned int)c) & 0x007f);
+ kanji_char1 = 0;
+ realkanji = 1;
+ } else {
+ kanji_char1 = ((unsigned int)c) & 0x007f;
+ continue;
+ }
+ break;
+ case JIS_CODE_ASCII:
+ default:
+ switch (kanji_mode) {
+ case SJIS_CODE:
+ if (kanji_char1) {
+ if ((0x40 <= c && c <= 0x7E) ||
+ (0x80 <= c && c <= 0xFC)) {
+ realkanji = 1;
+ /* SJIS to JIS */
+ kanji_char1 <<= 1; /* 81H-9FH --> 22H-3EH */
+ /* EOH-EFH --> C0H-DEH */
+ c -= 0x1f; /* 40H-7EH --> 21H-5FH */
+ /* 80H-9EH --> 61H-7FH */
+ /* 9FH-FCH --> 80H-DDH */
+ if (!(c & 0x80)) {
+ if (c < 0x61)
+ c++;
+ c += 0xde;
+ }
+ c &= 0xff;
+ c += 0xa1;
+ kanji_char1 += 0x1f;
+ tc = (kanji_char1 << 8) + c;
+ tc &= 0x7f7f;
+ kanji_char1 = 0;
+ }
+ } else {
+ if ((0x81 <= c && c <= 0x9f) ||
+ (0xE0 <= c && c <= 0xEF)) {
+ realkanji = 1;
+ kanji_char1 = c;
+ continue;
+ } else if (0xA1 <= c && c <= 0xDF) {
+ tc = (unsigned int)translations[JP_MAP][c];
+ goto hankana_skip;
+ }
+ }
+ break;
+ case EUC_CODE:
+ if (utf)
+ break;
+ if (c <= 0x7f) {
+ kanji_char1 = 0;
+ break;
+ }
+ if (kanji_char1) {
+ if (kanji_char1 == 0x8e) { /* SS2 */
+ /* realkanji ha tatenai */
+ tc = (unsigned int)translations[JP_MAP][c];
+ kanji_char1 = 0;
+ goto hankana_skip;
+ } else {
+ tc = (((unsigned int)kanji_char1) << 8) |
+ (((unsigned int)c) & 0x007f);
+ kanji_char1 = 0;
+ realkanji = 1;
+ }
+ } else {
+ kanji_char1 = (unsigned int)c;
+ continue;
+ }
+ break;
+ case JIS_CODE:
+ /* to be supported */
+ break;
+ } /* switch (kanji_mode) */
+ } /* switch (kanji_jis_mode) */
+ } /* if (vc_state == ESnormal) */
+
+#endif /* CONFIG_KANJI */
+ if (!realkanji) {
+ if (utf) {
+ /* Combine UTF-8 into Unicode */
+ /* Incomplete characters silently ignored */
+ if(c > 0x7f) {
+ if (utf_count > 0 && (c & 0xc0) == 0x80) {
+ utf_char = (utf_char << 6) | (c & 0x3f);
+ utf_count--;
+ if (utf_count == 0)
+ tc = c = utf_char;
+ else continue;
+ } else {
+ if ((c & 0xe0) == 0xc0) {
+ utf_count = 1;
+ utf_char = (c & 0x1f);
+ } else if ((c & 0xf0) == 0xe0) {
+ utf_count = 2;
+ utf_char = (c & 0x0f);
+ } else if ((c & 0xf8) == 0xf0) {
+ utf_count = 3;
+ utf_char = (c & 0x07);
+ } else if ((c & 0xfc) == 0xf8) {
+ utf_count = 4;
+ utf_char = (c & 0x03);
+ } else if ((c & 0xfe) == 0xfc) {
+ utf_count = 5;
+ utf_char = (c & 0x01);
+ } else
+ utf_count = 0;
+ continue;
+ }
+ } else {
+ tc = c;
+ utf_count = 0;
+ }
+ } else { /* no utf */
+#ifndef CONFIG_KANJI
+ tc = translate[toggle_meta ? (c|0x80) : c];
+#else
+ tc = translate[(toggle_meta || translate_ex) ? (c | 0x80) : c];
+#endif
+ }
+ } /* if (!realkanji) */
+#ifdef CONFIG_KANJI
+ hankana_skip:
+#endif
/* If the original code was a control character we
* only allow a glyph to be displayed if the code is
@@ -1949,43 +2226,71 @@
: CTRL_ACTION) >> c) & 1)))
&& (c != 127 || disp_ctrl)
&& (c != 128+27);
+ ok |= realkanji;
if (vc_state == ESnormal && ok) {
- /* Now try to find out how to display it */
- tc = conv_uni_to_pc(vc_cons[currcons].d, tc);
- if ( tc == -4 ) {
+ if (!realkanji) {
+ /* Now try to find out how to display it */
+ tc = conv_uni_to_pc(vc_cons[currcons].d, tc);
+ if ( tc == -4 ) {
/* If we got -4 (not found) then see if we have
defined a replacement character (U+FFFD) */
- tc = conv_uni_to_pc(vc_cons[currcons].d, 0xfffd);
+ tc = conv_uni_to_pc(vc_cons[currcons].d, 0xfffd);
/* One reason for the -4 can be that we just
did a clear_unimap();
try at least to show something. */
- if (tc == -4)
- tc = c;
- } else if ( tc == -3 ) {
+ if (tc == -4)
+ tc = c;
+ } else if ( tc == -3 ) {
/* Bad hash table -- hope for the best */
- tc = c;
- }
- if (tc & ~charmask)
- continue; /* Conversion failed */
+ tc = c;
+ }
+ if (tc & ~charmask)
+ continue; /* Conversion failed */
+ } /* !realkanji */
if (need_wrap || decim)
FLUSH
if (need_wrap) {
cr(currcons);
lf(currcons);
+ if (kanjioverrun) {
+ x++;
+ pos += 2;
+ kanjioverrun = 0;
+ }
}
if (decim)
insert_char(currcons, 1);
+#ifndef CONFIG_KANJI
scr_writew(himask ?
((attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) :
(attr << 8) + tc,
(u16 *) pos);
+#else /* CONFIG_KANJI */
+ if (realkanji) {
+ tc = ((tc >> 8) & 0xff) | ((tc << 8) & 0xff00);
+ *((u16 *)pos) = (tc - 0x20) & 0xff7f;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ x ++;
+ pos += 2;
+ *((u16 *)pos) = (tc - 0x20) | 0x80;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ } else {
+ *((u16 *)pos) = tc & 0x00ff;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ }
+#endif /* !CONFIG_KANJI */
if (DO_UPDATE && draw_x < 0) {
draw_x = x;
draw_from = pos;
+ if (realkanji) {
+ draw_x --;
+ draw_from -= 2;
+ }
}
+#ifndef CONFIG_KANJI
if (x == video_num_columns - 1) {
need_wrap = decawm;
draw_to = pos+2;
@@ -1993,6 +2298,16 @@
x++;
draw_to = (pos+=2);
}
+#else /* CONFIG_KANJI */
+ if (x >= video_num_columns - 1) {
+ need_wrap = decawm;
+ kanjioverrun = x - video_num_columns + 1;
+ draw_to = pos + 2;
+ } else {
+ x++;
+ draw_to = (pos += 2);
+ }
+#endif /* !CONFIG_KANJI */
continue;
}
FLUSH
@@ -2419,9 +2734,17 @@
vc_cons[currcons].d->vc_palette[k++] = default_grn[j] ;
vc_cons[currcons].d->vc_palette[k++] = default_blu[j] ;
}
- def_color = 0x07; /* white */
- ulcolor = 0x0f; /* bold white */
- halfcolor = 0x08; /* grey */
+ if (pc98) {
+ def_color = 0x07; /* white */
+ def_attr = 0xE1;
+ ul_attr = 0x08; /* underline */
+ half_attr = 0x00; /* ignore half color */
+ bold_attr = 0xC1; /* yellow */
+ } else {
+ def_color = 0x07; /* white */
+ ulcolor = 0x0f; /* bold white */
+ halfcolor = 0x08; /* grey */
+ }
init_waitqueue_head(&vt_cons[currcons]->paste_wait);
reset_terminal(currcons, do_clear);
}
@@ -2462,7 +2785,12 @@
vt_cons[currcons] = (struct vt_struct *)
alloc_bootmem(sizeof(struct vt_struct));
visual_init(currcons, 1);
+#if defined CONFIG_PC9800 || defined CONFIG_FB
+ screenbuf
+ = (unsigned short *) alloc_bootmem(screenbuf_size * 2);
+#else
screenbuf = (unsigned short *) alloc_bootmem(screenbuf_size);
+#endif
kmalloced = 0;
vc_init(currcons, video_num_lines, video_num_columns,
currcons || !sw->con_save_screen);
@@ -2955,9 +3283,12 @@
/* used by selection */
u16 screen_glyph(int currcons, int offset)
{
- u16 w = scr_readw(screenpos(currcons, offset, 1));
+ vram_char_t w = scr_readw(screenpos(currcons, offset, 1));
u16 c = w & 0xff;
+ if (pc98)
+ return ((u16)(w >> 16) & 0xff00) | c;
+
if (w & hi_font_mask)
c |= 0x100;
return c;
@@ -3019,8 +3350,10 @@
EXPORT_SYMBOL(default_red);
EXPORT_SYMBOL(default_grn);
EXPORT_SYMBOL(default_blu);
+#ifndef CONFIG_PC9800
EXPORT_SYMBOL(video_font_height);
EXPORT_SYMBOL(video_scan_lines);
+#endif
EXPORT_SYMBOL(vc_resize);
EXPORT_SYMBOL(fg_console);
EXPORT_SYMBOL(console_blank_hook);
diff -urN linux/drivers/char/vt_ioctl.c linux98/drivers/char/vt_ioctl.c
--- linux/drivers/char/vt_ioctl.c Sat Oct 12 13:22:14 2002
+++ linux98/drivers/char/vt_ioctl.c Sat Oct 12 14:18:52 2002
@@ -63,9 +63,11 @@
asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
#endif
+#ifndef CONFIG_PC9800
unsigned int video_font_height;
unsigned int default_font_height;
unsigned int video_scan_lines;
+#endif
/*
* these are the valid i/o ports we're allowed to change. they map all the
@@ -637,6 +639,17 @@
return 0;
}
+#ifdef CONFIG_PC9800
+ case VT_GDC_RESIZE:
+ {
+ if (!perm)
+ return -EPERM;
+/* con_adjust_height(0);*/
+ update_screen(console);
+ return 0;
+ }
+#endif
+
case VT_SETMODE:
{
struct vt_mode tmp;
@@ -828,7 +841,9 @@
__get_user(clin, &vtconsize->v_clin);
__get_user(vcol, &vtconsize->v_vcol);
__get_user(ccol, &vtconsize->v_ccol);
+#ifndef CONFIG_PC9800
vlin = vlin ? vlin : video_scan_lines;
+#endif
if ( clin )
{
if ( ll )
@@ -853,10 +868,12 @@
if ( clin > 32 )
return -EINVAL;
+#ifndef CONFIG_PC9800
if ( vlin )
video_scan_lines = vlin;
if ( clin )
video_font_height = clin;
+#endif
return vc_resize_all(ll, cc);
}
@@ -1024,8 +1041,10 @@
vt_cons[new_console]->vt_mode.frsig = 0;
vt_cons[new_console]->vt_pid = -1;
vt_cons[new_console]->vt_newvt = -1;
+#ifndef CONFIG_PC9800
if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */
reset_palette(new_console) ;
+#endif
}
/*
diff -urN linux/include/linux/console.h linux98/include/linux/console.h
--- linux/include/linux/console.h Sat Oct 19 13:01:51 2002
+++ linux98/include/linux/console.h Mon Oct 28 11:31:37 2002
@@ -17,6 +17,13 @@
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/spinlock.h>
+#include <linux/config.h>
+
+#ifndef CONFIG_PC9800
+typedef __u16 vram_char_t;
+#else
+typedef __u32 vram_char_t;
+#endif
struct vc_data;
struct console_font_op;
@@ -32,7 +39,7 @@
void (*con_init)(struct vc_data *, int);
void (*con_deinit)(struct vc_data *);
void (*con_clear)(struct vc_data *, int, int, int, int);
- void (*con_putc)(struct vc_data *, int, int, int);
+ void (*con_putc)(struct vc_data *, int, vram_char_t, int);
void (*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
void (*con_cursor)(struct vc_data *, int);
int (*con_scroll)(struct vc_data *, int, int, int, int);
@@ -48,6 +55,7 @@
void (*con_invert_region)(struct vc_data *, u16 *, int);
u16 *(*con_screen_pos)(struct vc_data *, int);
unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
+ int (*con_setterm_command)(struct vc_data *);
};
extern const struct consw *conswitchp;
@@ -55,6 +63,7 @@
extern const struct consw dummy_con; /* dummy console buffer */
extern const struct consw fb_con; /* frame buffer based console */
extern const struct consw vga_con; /* VGA text console */
+extern const struct consw gdc_con; /* PC-9800 GDC text console */
extern const struct consw newport_con; /* SGI Newport console */
extern const struct consw prom_con; /* SPARC PROM console */
diff -urN linux/include/linux/console_struct.h linux98/include/linux/console_struct.h
--- linux/include/linux/console_struct.h Sat Oct 19 13:01:07 2002
+++ linux98/include/linux/console_struct.h Mon Oct 28 16:45:49 2002
@@ -9,6 +9,9 @@
* to achieve effects such as fast scrolling by changing the origin.
*/
+#include <linux/config.h>
+#include <linux/console.h>
+
#define NPAR 16
struct vc_data {
@@ -25,9 +28,15 @@
unsigned char vc_s_color; /* Saved foreground & background */
unsigned char vc_ulcolor; /* Color for underline mode */
unsigned char vc_halfcolor; /* Color for half intensity mode */
+#ifdef CONFIG_GDC_CONSOLE
+ unsigned char vc_def_attr; /* Default attributes */
+ unsigned char vc_ul_attr; /* Attribute for underline mode */
+ unsigned char vc_half_attr; /* Attribute for half intensity mode */
+ unsigned char vc_bold_attr; /* Attribute for bold mode */
+#endif
unsigned short vc_complement_mask; /* [#] Xor mask for mouse pointer */
unsigned short vc_hi_font_mask; /* [#] Attribute set for upper 256 chars of font or 0 if not supported */
- unsigned short vc_video_erase_char; /* Background erase character */
+ vram_char_t vc_video_erase_char; /* Background erase character */
unsigned short vc_s_complement_mask; /* Saved mouse pointer mask */
unsigned int vc_x, vc_y; /* Cursor position */
unsigned int vc_top, vc_bottom; /* Scrolling region */
@@ -82,6 +91,18 @@
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
unsigned long vc_uni_pagedir;
unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+#ifdef CONFIG_PC9800
+ unsigned char vc_kanji_char1;
+ unsigned char vc_kanji_mode;
+ unsigned char vc_kanji_jis_mode;
+ unsigned char vc_s_kanji_mode;
+ unsigned char vc_s_kanji_jis_mode;
+ unsigned int vc_translate_ex;
+ unsigned char vc_G0_charset_ex;
+ unsigned char vc_G1_charset_ex;
+ unsigned char vc_saved_G0_ex;
+ unsigned char vc_saved_G1_ex;
+#endif /* CONFIG_PC9800 */
/* additional information is in vt_kern.h */
};
@@ -105,6 +126,10 @@
#define CUR_HWMASK 0x0f
#define CUR_SWMASK 0xfff0
+#ifndef CONFIG_PC9800
#define CUR_DEFAULT CUR_UNDERLINE
+#else
+#define CUR_DEFAULT CUR_BLOCK
+#endif
#define CON_IS_VISIBLE(conp) (*conp->vc_display_fg == conp)
diff -urN linux/include/linux/consolemap.h linux98/include/linux/consolemap.h
--- linux/include/linux/consolemap.h Sat Oct 19 13:02:34 2002
+++ linux98/include/linux/consolemap.h Mon Oct 21 14:19:31 2002
@@ -7,6 +7,7 @@
#define GRAF_MAP 1
#define IBMPC_MAP 2
#define USER_MAP 3
+#define JP_MAP 4
struct vc_data;
diff -urN linux/include/linux/tty.h linux98/include/linux/tty.h
--- linux/include/linux/tty.h Sat Oct 19 13:01:54 2002
+++ linux98/include/linux/tty.h Mon Oct 21 14:22:18 2002
@@ -123,6 +123,10 @@
#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
+#define VIDEO_TYPE_98NORMAL 0xa4 /* NEC PC-9800 normal */
+#define VIDEO_TYPE_9840 0xa5 /* NEC PC-9800 normal 40 lines */
+#define VIDEO_TYPE_98HIRESO 0xa6 /* NEC PC-9800 hireso */
+
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
diff -urN linux/include/linux/vt.h linux98/include/linux/vt.h
--- linux/include/linux/vt.h Sat Oct 19 13:02:30 2002
+++ linux98/include/linux/vt.h Mon Oct 21 14:26:03 2002
@@ -50,5 +50,6 @@
#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
+#define VT_GDC_RESIZE 0x5698
#endif /* _LINUX_VT_H */
diff -urN linux/include/linux/vt_buffer.h linux98/include/linux/vt_buffer.h
--- linux/include/linux/vt_buffer.h Sat Oct 19 13:02:24 2002
+++ linux98/include/linux/vt_buffer.h Mon Oct 21 14:28:40 2002
@@ -19,6 +19,10 @@
#include <asm/vga.h>
#endif
+#ifdef CONFIG_GDC_CONSOLE
+#include <asm/gdc.h>
+#endif
+
#ifndef VT_BUF_HAVE_RW
#define scr_writew(val, addr) (*(addr) = (val))
#define scr_readw(addr) (*(addr))
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCHSET 4/17] support PC-9800 against 2.5.45-ac1 (console)
2002-11-06 17:59 ` [PATCHSET 4/17] support PC-9800 against 2.5.45-ac1 (console) Osamu Tomita
@ 2002-11-11 17:18 ` Osamu Tomita
0 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-11 17:18 UTC (permalink / raw)
To: LKML; +Cc: Alan Cox
[-- Attachment #1: Type: text/plain, Size: 341 bytes --]
Osamu Tomita wrote:
>
> This patch adds VT console support for PC-9800.
> Including Japanese "Kanji" and "kana" letters support.
I fixed compile BUG. Please replace "console.patch".
And I put whole patchset agaist 2.5.45-ac1 following URL.
http://downloads.sourceforge.jp/linux98/1539/linux98-2.5.45-ac1.patch.tar.bz2
Regards,
Osamu Tomita
[-- Attachment #2: console.patch --]
[-- Type: text/plain, Size: 41170 bytes --]
diff -urN linux/drivers/char/Makefile linux98/drivers/char/Makefile
--- linux/drivers/char/Makefile Thu Oct 31 13:23:11 2002
+++ linux98/drivers/char/Makefile Thu Oct 31 15:14:04 2002
@@ -5,7 +5,11 @@
#
# This file contains the font map for the default (hardware) font
#
+ifneq ($(CONFIG_PC9800),y)
FONTMAPFILE = cp437.uni
+else
+FONTMAPFILE = pc9800.uni
+endif
obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o eventpoll.o
@@ -14,7 +18,8 @@
export-objs := busmouse.o vt.o generic_serial.o ip2main.o \
ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
- selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o eventpoll.o
+ selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o \
+ eventpoll.o upd4990a.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o consolemap.o consolemap_deftbl.o selection.o keyboard.o
obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
@@ -51,6 +56,7 @@
obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
+obj-$(CONFIG_PC9800_OLDLP)) += lp_old98.o
obj-$(CONFIG_BUSMOUSE) += busmouse.o
obj-$(CONFIG_DTLK) += dtlk.o
@@ -59,6 +65,7 @@
obj-$(CONFIG_SONYPI) += sonypi.o
obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
obj-$(CONFIG_RTC) += rtc.o
+obj-$(CONFIG_RTC98) += upd4990a.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
ifeq ($(CONFIG_PPC),)
diff -urN linux/drivers/char/console_macros.h linux98/drivers/char/console_macros.h
--- linux/drivers/char/console_macros.h Sat Oct 19 13:01:17 2002
+++ linux98/drivers/char/console_macros.h Mon Oct 28 16:53:39 2002
@@ -55,6 +55,10 @@
#define s_reverse (vc_cons[currcons].d->vc_s_reverse)
#define ulcolor (vc_cons[currcons].d->vc_ulcolor)
#define halfcolor (vc_cons[currcons].d->vc_halfcolor)
+#define def_attr (vc_cons[currcons].d->vc_def_attr)
+#define ul_attr (vc_cons[currcons].d->vc_ul_attr)
+#define half_attr (vc_cons[currcons].d->vc_half_attr)
+#define bold_attr (vc_cons[currcons].d->vc_bold_attr)
#define tab_stop (vc_cons[currcons].d->vc_tab_stop)
#define palette (vc_cons[currcons].d->vc_palette)
#define bell_pitch (vc_cons[currcons].d->vc_bell_pitch)
@@ -64,6 +68,16 @@
#define complement_mask (vc_cons[currcons].d->vc_complement_mask)
#define s_complement_mask (vc_cons[currcons].d->vc_s_complement_mask)
#define hi_font_mask (vc_cons[currcons].d->vc_hi_font_mask)
+#define kanji_mode (vc_cons[currcons].d->vc_kanji_mode)
+#define s_kanji_mode (vc_cons[currcons].d->vc_s_kanji_mode)
+#define kanji_char1 (vc_cons[currcons].d->vc_kanji_char1)
+#define translate_ex (vc_cons[currcons].d->vc_translate_ex)
+#define G0_charset_ex (vc_cons[currcons].d->vc_G0_charset_ex)
+#define G1_charset_ex (vc_cons[currcons].d->vc_G1_charset_ex)
+#define saved_G0_ex (vc_cons[currcons].d->vc_saved_G0_ex)
+#define saved_G1_ex (vc_cons[currcons].d->vc_saved_G1_ex)
+#define kanji_jis_mode (vc_cons[currcons].d->vc_kanji_jis_mode)
+#define s_kanji_jis_mode (vc_cons[currcons].d->vc_s_kanji_jis_mode)
#define vcmode (vt_cons[currcons]->vc_mode)
diff -urN linux/drivers/char/console_pc9800.h linux98/drivers/char/console_pc9800.h
--- linux/drivers/char/console_pc9800.h Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/console_pc9800.h Mon Oct 28 11:48:10 2002
@@ -0,0 +1,14 @@
+#ifndef __CONSOLE_PC9800_H
+#define __CONSOLE_PC9800_H
+
+#define BLANK_ATTR 0x00E1
+
+#define JIS_CODE 0x01
+#define EUC_CODE 0x00
+#define SJIS_CODE 0x02
+#define JIS_CODE_ASCII 0x00
+#define JIS_CODE_78 0x01
+#define JIS_CODE_83 0x02
+#define JIS_CODE_90 0x03
+
+#endif /* __CONSOLE_PC9800_H */
diff -urN linux/drivers/char/consolemap.c linux98/drivers/char/consolemap.c
--- linux/drivers/char/consolemap.c Sat Oct 19 13:02:27 2002
+++ linux98/drivers/char/consolemap.c Mon Oct 21 13:18:03 2002
@@ -22,7 +22,7 @@
#include <linux/console_struct.h>
#include <linux/vt_kern.h>
-static unsigned short translations[][256] = {
+unsigned short translations[][256] = {
/* 8-bit Latin-1 mapped to Unicode -- trivial mapping */
{
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
@@ -162,7 +162,59 @@
0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef,
0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7,
0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff
- }
+ },
+ /* JIS X0201 mapped to Unicode */
+ /* code marked with ** is not defined in JIS X0201.
+ So 0x00 - 0x1f are mapped to same to Laten1,
+ and others are mapped to PC-9800 internal font# directry */
+ {
+ 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
+/* ** ** ** ** ** ** ** ** */
+ 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
+/* ** ** ** ** ** ** ** ** */
+ 0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
+/* ** ** ** ** ** ** ** ** */
+ 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f,
+/* ** ** ** ** ** ** ** ** */
+ 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027,
+ 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
+ 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037,
+ 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f,
+ 0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047,
+ 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
+ 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057,
+ 0x0058, 0x0059, 0x005a, 0x005b, 0x00a5, 0x005d, 0x005e, 0x005f,
+ 0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067,
+ 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f,
+ 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077,
+ 0x0078, 0x0079, 0x007a, 0x007b, 0x007c, 0x007d, 0x203e, 0xf07f,
+/* ** */
+ 0xf080, 0xf081, 0xf082, 0xf083, 0xf084, 0xf085, 0xf086, 0xf087,
+/* ** ** ** ** ** ** ** ** */
+ 0xf088, 0xf089, 0xf08a, 0xf08b, 0xf08c, 0xf08d, 0xf08e, 0xf08f,
+/* ** ** ** ** ** ** ** ** */
+ 0xf090, 0xf091, 0xf092, 0xf093, 0xf094, 0xf095, 0xf096, 0xf097,
+/* ** ** ** ** ** ** ** ** */
+ 0xf098, 0xf099, 0xf09a, 0xf09b, 0xf09c, 0xf09d, 0xf09e, 0xf09f,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0a0, 0xff61, 0xff62, 0xff63, 0xff64, 0xff65, 0xff66, 0xff67,
+/* ** */
+ 0xff68, 0xff69, 0xff6a, 0xff6b, 0xff6c, 0xff6d, 0xff6e, 0xff6f,
+ 0xff70, 0xff71, 0xff72, 0xff73, 0xff74, 0xff75, 0xff76, 0xff77,
+ 0xff78, 0xff79, 0xff7a, 0xff7b, 0xff7c, 0xff7d, 0xff7e, 0xff7f,
+ 0xff80, 0xff81, 0xff82, 0xff83, 0xff84, 0xff85, 0xff86, 0xff87,
+ 0xff88, 0xff89, 0xff8a, 0xff8b, 0xff8c, 0xff8d, 0xff8e, 0xff8f,
+ 0xff90, 0xff91, 0xff92, 0xff93, 0xff94, 0xff95, 0xff96, 0xff97,
+ 0xff98, 0xff99, 0xff9a, 0xff9b, 0xff9c, 0xff9d, 0xff9e, 0xff9f,
+ 0xf0e0, 0xf0e1, 0xf0e2, 0xf0e3, 0xf0e4, 0xf0e5, 0xf0e6, 0xf0e7,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff
+/* ** ** ** ** ** ** ** ** */
+ },
};
/* The standard kernel character-to-font mappings are not invertible
@@ -176,7 +228,7 @@
u16 **uni_pgdir[32];
unsigned long refcount;
unsigned long sum;
- unsigned char *inverse_translations[4];
+ unsigned char *inverse_translations[5];
int readonly;
};
diff -urN linux/drivers/char/pc9800.uni linux98/drivers/char/pc9800.uni
--- linux/drivers/char/pc9800.uni Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/pc9800.uni Fri Aug 17 21:50:17 2001
@@ -0,0 +1,260 @@
+#
+# Unicode table for PC-9800 console.
+# Copyright (C) 1998,2001 Linux/98 project (project Seraphim)
+# Kyoto University Microcomputer Club (KMC).
+#
+
+# Kore ha unicode wo 98 no ROM no font ni taio saseru tame no
+# map desu.
+
+# Characters for control codes.
+# PC-9800 uses 2-char sequences while Unicode uses 3-char for some codes.
+0x00
+0x01 U+2401 # SH / SOH
+0x02 U+2402 # SX / SOX
+0x03 U+2403 # EX / ETX
+0x04 U+2404 # ET / EOT
+0x05 U+2405 # EQ / ENQ
+0x06 U+2406 # AK / ACK
+0x07 U+2407 # BL / BEL
+0x08 U+2408 # BS
+0x09 U+2409 # HT
+0x0a U+240a # LF
+0x0b # HM / (VT)
+0x0c # CL / (FF)
+0x0d U+240d # CR
+0x0e # SO / (SS)
+0x0f U+240f # SI
+0x10 U+2410 # DE / DLE
+0x11 U+2411 # D1 / DC1
+0x12 U+2412 # D2 / DC2
+0x13 U+2413 # D3 / DC3
+0x14 U+2414 # D4 / DC4
+0x15 U+2415 # NK / NAK
+0x16 U+2416 # SN / SYN
+0x17 U+2417 # EB / ETB
+0x18 U+2418 # CN / CAN
+0x19 U+2419 # EM
+0x1a U+241a # SB / SUB
+0x1b U+241b # EC / ESC
+
+# arrow
+0x1c U+2192 U+ffeb # right
+0x1d U+2190 U+ffe9 # left
+0x1e U+2191 U+ffea # up
+0x1f U+2193 U+ffec # down
+
+#
+# The ASCII range is identity-mapped, but some of the characters also
+# have to act as substitutes, especially the upper-case characters.
+#
+0x20 U+0020
+0x21 U+0021
+# U+00a8 is Latin-1 Supplement DIAELESIS.
+0x22 U+0022 U+00a8
+0x23 U+0023
+0x24 U+0024
+0x25 U+0025
+0x26 U+0026
+0x26 U+2019 # General Punctuation "RIGHT SINGLE QUOTATION MARK"
+0x27 U+0027 U+2032
+0x28 U+0028
+0x29 U+0029
+0x2a U+002a
+0x2b U+002b
+# U+00b8 is Latin-1 Supplement CEDILLA.
+0x2c U+002c U+00b8
+# U+00b8 is Latin-1 Supplement SOFT HYPHEN.
+0x2d U+002d U+00ad
+0x2d U+2212 # Mathematical Operators "MINUS SIGN"
+0x2e U+002e
+0x2f U+002f
+0x2f U+2044 # General Punctuation "FRACTION SLASH"
+0x2f U+2215 # Mathematical Operators "DIVISION SLASH"
+0x30 U+0030
+0x31 U+0031
+0x32 U+0032
+0x33 U+0033
+0x34 U+0034
+0x35 U+0035
+0x36 U+0036
+0x37 U+0037
+0x38 U+0038
+0x39 U+0039
+0x3a U+003a
+0x3a U+003a # Mathematical Operators "RATIO"
+0x3b U+003b
+0x3c U+003c
+0x3d U+003d
+0x3e U+003e
+0x3f U+003f
+0x40 U+0040
+0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
+0x42 U+0042
+# U+00a9 is Latin-1 Supplement COPYRIGHT SIGN.
+0x43 U+0043 U+00a9
+0x44 U+0044
+0x45 U+0045 U+00c8 U+00ca U+00cb
+0x46 U+0046
+0x47 U+0047
+0x48 U+0048
+0x49 U+0049 U+00cc U+00cd U+00ce U+00cf
+0x4a U+004a
+# U+212a: Letterlike Symbols "KELVIN SIGN"
+0x4b U+004b U+212a
+0x4c U+004c
+0x4d U+004d
+0x4e U+004e
+0x4f U+004f U+00d2 U+00d3 U+00d4 U+00d5
+0x50 U+0050
+0x51 U+0051
+# U+00ae: Latin-1 Supplement "REGISTERED SIGN"
+0x52 U+0052 U+00ae
+0x53 U+0053
+0x54 U+0054
+0x55 U+0055 U+00d9 U+00da U+00db
+0x56 U+0056
+0x57 U+0057
+0x58 U+0058
+0x59 U+0059 U+00dd
+0x5a U+005a
+0x5b U+005b
+0x5c U+00a5 # Latin-1 Supplement "YEN SIGN"
+0x5d U+005d
+0x5e U+005e
+0x5f U+005f U+f804
+0x60 U+0060 U+2035
+0x61 U+0061 U+00e3
+0x62 U+0062
+0x63 U+0063
+0x64 U+0064
+0x65 U+0065
+0x66 U+0066
+0x67 U+0067
+0x68 U+0068
+0x69 U+0069
+0x6a U+006a
+0x6b U+006b
+0x6c U+006c
+0x6d U+006d
+0x6e U+006e
+0x6f U+006f U+00f5
+0x70 U+0070
+0x71 U+0071
+0x72 U+0072
+0x73 U+0073
+0x74 U+0074
+0x75 U+0075
+0x76 U+0076
+0x77 U+0077
+0x78 U+0078 U+00d7
+0x79 U+0079 U+00fd
+0x7a U+007a
+0x7b U+007b
+# U+00a6: Latin-1 Supplement "BROKEN (VERTICAL) BAR"
+0x7c U+007c U+00a6
+0x7d U+007d
+0x7e U+007e
+
+# kuhaku
+0x7f # U+2302
+
+# Block Elements.
+0x80 U+2581 # LOWER ONE EIGHTH BLOCK
+0x81 U+2582 # LOWER ONE QUARTER BLOCK
+0x82 U+2583 # LOWER THREE EIGHTHS BLOCK
+0x83 U+2584 # LOWER HALF BLOCK
+0x84 U+2585 # LOWER FIVE EIGHTHS BLOCK
+0x85 U+2586 # LOWER THREE QUARTERS BLOCK
+0x86 U+2587 # LOWER SEVEN EIGHTHS BLOCK
+0x87 U+2588 # FULL BLOCK
+0x88 U+258f # LEFT ONE EIGHTH BLOCK
+0x89 U+258e # LEFT ONE QUARTER BLOCK
+0x8a U+258d # LEFT THREE EIGHTHS BLOCK
+0x8b U+258c # LEFT HALF BLOCK
+0x8c U+258b # LEFT FIVE EIGHTHS BLOCK
+0x8d U+258a # LEFT THREE QUARTERS BLOCK
+0x8e U+2589 # LEFT SEVEN EIGHTHS BLOCK
+
+# Box Drawing.
+0x8f U+253c
+0x90 U+2534
+0x91 U+252c
+0x92 U+2524
+0x93 U+251c
+0x94 U+203e # General Punctuation "OVERLINE" (= "SPACING OVERSCORE")
+0x95 U+2500 # Box Drawing "BOX DRAWING LIGHT HORIZONTAL"
+0x96 U+2502 # Box Drawing "BOX DRAWING LIGHT VERTICAL"
+0x96 U+ffe8 # Halfwidth symbol variants "HALFWIDTH FORMS LIGHT VERTICAL"
+0x97 U+2595 # Block Elements "RIGHT ONE EIGHTH BLOCK"
+0x98 U+250c
+0x99 U+2510
+0x9a U+2514
+0x9b U+2518
+
+0x9c U+256d # "BOX DRAWING LIGHT ARC DOWN AND RIGHT"
+0x9d U+256e # "BOX DRAWING LIGHT ARC DOWN AND LEFT"
+0x9e U+2570 # "BOX DRAWING LIGHT ARC UP AND RIGHT"
+0x9f U+256f # "BOX DRAWING LIGHT ARC UP AND LEFT"
+
+0xa0 # another whitespace
+
+# Halfwidth CJK punctuation
+0xa1 - 0xa4 U+ff61 - U+ff64
+
+# Halfwidth Katakana variants
+0xa5 - 0xdf U+ff65 - U+ff9f
+0xa5 U+00b7 # Latin-1 Supplement "MIDDLE DOT"
+0xdf U+00b0 # Latin-1 Supplement "DEGREE SIGN"
+
+# Box Drawing
+0xe0 U+2550 # "BOX DRAWING DOUBLE HORIZONTAL"
+0xe1 U+255e # "BOX DRAWING VERTICAL SINGLE AND RIGHT DOUBLE"
+0xe2 U+256a # "BOX DRAWING VERTICAL SINGLE AND HORIZONTAL DOUBLE"
+0xe3 U+2561 # "BOX DRAWING VERTICAL SINGLE AND LEFT DOUBLE"
+
+# Geometric Shapes
+0xe4 U+25e2 # "BLACK LOWER RIGHT TRIANGLE"
+0xe5 U+25e3 # "BLACK LOWER LEFT TRIANGLE"
+0xe6 U+25e5 # "BLACK UPPER RIGHT TRIANGLE"
+0xe7 U+25e4 # "BLACK UPPER LEFT TRIANGLE"
+
+# Playing card symbols
+0xe8 U+2660 # "BLACK SPADE SUIT"
+0xe9 U+2665 # "BLACK HEART SUIT"
+0xea U+2666 # "BLACK DIAMOND SUIT"
+0xeb U+2663 # "BLACK CLUB SUIT"
+
+# Geometric Shapes
+0xec U+25cf # "BLACK CIRCLE"
+0xed U+25cb U+25ef # "WHITE CIRCLE", "LARGE CIRCLE"
+
+# Box Drawing
+0xee U+2571 # "BOX DRAWING LIGHT DIAGONAL UPPER RIGHT TO LOWER LEFT"
+0xef U+2572 # "BOX DRAWING LIGHT DIAGONAL UPPER LEFT TO LOWER RIGHT"
+0xf0 U+2573 # "BOX DRAWING LIGHT DIAGONAL CROSS"
+
+# CJK Unified Ideographs (XXX - should these be here?)
+0xf1 U+5186
+0xf2 U+5e74
+0xf3 U+6708
+0xf4 U+65e5
+0xf5 U+6642
+0xf6 U+5206
+0xf7 U+79d2
+
+# unassigned
+0xf8
+0xf9
+0xfa
+0xfb
+
+0xfc U+005c # "REVERSE SOLIDUS" / "BACKSLASH"
+0xfc U+2216 # Mathematical Operators "SET MINUS"
+
+# unassigned
+0xfd
+0xfe
+0xff
+
+# End of pc9800.uni
diff -urN linux/drivers/char/vt.c linux98/drivers/char/vt.c
--- linux/drivers/char/vt.c Thu Oct 31 09:43:39 2002
+++ linux98/drivers/char/vt.c Tue Nov 12 01:08:13 2002
@@ -90,6 +90,9 @@
#include <linux/devfs_fs_kernel.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
+#ifdef CONFIG_PC9800
+#define CONFIG_KANJI
+#endif
#include <linux/console_struct.h>
#include <linux/kbd_kern.h>
#include <linux/consolemap.h>
@@ -108,6 +111,10 @@
#include "console_macros.h"
+#ifdef CONFIG_PC9800
+#include "console_pc9800.h"
+extern unsigned short translations[][256];
+#endif
const struct consw *conswitchp;
@@ -143,6 +150,10 @@
static void blank_screen(unsigned long dummy);
static void gotoxy(int currcons, int new_x, int new_y);
static void save_cur(int currcons);
+#ifdef CONFIG_KANJI
+static void save_cur_kanji(int currcons);
+static void restore_cur_kanji(int currcons);
+#endif
static void reset_terminal(int currcons, int do_clear);
static void con_flush_chars(struct tty_struct *tty);
static void set_vesa_blanking(unsigned long arg);
@@ -203,6 +214,11 @@
static struct timer_list console_timer;
/*
+ * Whether PC-9800 or not
+ */
+extern int pc98;
+
+/*
* Low-Level Functions
*/
@@ -293,7 +309,7 @@
xx = nxx; yy = nyy;
}
for(;;) {
- u16 attrib = scr_readw(p) & 0xff00;
+ vram_char_t attrib = scr_readw(p) & 0xff00;
int startx = xx;
u16 *q = p;
while (xx < video_num_columns && count) {
@@ -379,6 +395,8 @@
{
attr = build_attr(currcons, color, intensity, blink, underline, reverse ^ decscnm);
video_erase_char = (build_attr(currcons, color, 1, blink, 0, decscnm) << 8) | ' ';
+ if (pc98 && decscnm)
+ video_erase_char |= 0x0400; /* reverse */
}
/* Note: inverting the screen twice should revert to the original state */
@@ -395,7 +413,7 @@
else {
u16 *q = p;
int cnt = count;
- u16 a;
+ vram_char_t a;
if (!can_do_color) {
while (cnt--) {
@@ -425,11 +443,30 @@
do_update_region(currcons, (unsigned long) p, count);
}
+#ifdef CONFIG_KANJI
+/* can called form keyboard.c */
+void do_change_kanji_mode(int currcons, unsigned long mode)
+{
+ switch (mode) {
+ case 0:
+ kanji_mode = EUC_CODE;
+ break;
+ case 1:
+ kanji_mode = JIS_CODE;
+ break;
+ case 2:
+ kanji_mode = SJIS_CODE;
+ break;
+ }
+ kanji_char1 = 0;
+}
+#endif /* CONFIG_KANJI */
+
/* used by selection: complement pointer position */
void complement_pos(int currcons, int offset)
{
static unsigned short *p;
- static unsigned short old;
+ static vram_char_t old;
static unsigned short oldx, oldy;
if (p) {
@@ -440,10 +477,15 @@
if (offset == -1)
p = NULL;
else {
- unsigned short new;
+ vram_char_t new;
p = screenpos(currcons, offset, 1);
old = scr_readw(p);
+#ifndef CONFIG_FB_EGC
new = old ^ complement_mask;
+#else
+ new = (old & 0xff0000ff) | ((old & 0xf000) >> 4)
+ | ((old & 0xf00) << 4);
+#endif
scr_writew(new, p);
if (DO_UPDATE) {
oldx = (offset >> 1) % video_num_columns;
@@ -502,7 +544,7 @@
static void add_softcursor(int currcons)
{
- int i = scr_readw((u16 *) pos);
+ vram_char_t i = scr_readw((u16 *) pos);
u32 type = cursor_type;
if (! (type & 0x10)) return;
@@ -638,8 +680,12 @@
complement_mask = 0;
can_do_color = 0;
sw->con_init(vc_cons[currcons].d, init);
- if (!complement_mask)
- complement_mask = can_do_color ? 0x7700 : 0x0800;
+ if (!complement_mask) {
+ if (pc98)
+ complement_mask = 0x0400;
+ else
+ complement_mask = can_do_color ? 0x7700 : 0x0800;
+ }
s_complement_mask = complement_mask;
video_size_row = video_num_columns<<1;
screenbuf_size = video_num_lines*video_size_row;
@@ -671,7 +717,7 @@
visual_init(currcons, 1);
if (!*vc_cons[currcons].d->vc_uni_pagedir_loc)
con_set_default_unimap(currcons);
- q = (long)kmalloc(screenbuf_size, GFP_KERNEL);
+ q = (long)kmalloc(screenbuf_size + (pc98 ? screenbuf_size : 0), GFP_KERNEL);
if (!q) {
kfree((char *) p);
vc_cons[currcons].d = NULL;
@@ -713,7 +759,7 @@
(cc == video_num_columns && ll == video_num_lines))
newscreens[currcons] = NULL;
else {
- unsigned short *p = (unsigned short *) kmalloc(ss, GFP_USER);
+ unsigned short *p = (unsigned short *)kmalloc(ss + (pc98 ? ss : 0), GFP_USER);
if (!p) {
for (i = first; i < currcons; i++)
if (newscreens[i])
@@ -1077,6 +1123,9 @@
translate = set_translate(charset == 0
? G0_charset
: G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = (charset == 0 ? G0_charset_ex : G1_charset_ex);
+#endif
disp_ctrl = 0;
toggle_meta = 0;
break;
@@ -1085,6 +1134,9 @@
* chars < 32 be displayed as ROM chars.
*/
translate = set_translate(IBMPC_MAP,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = 0;
+#endif
disp_ctrl = 1;
toggle_meta = 0;
break;
@@ -1093,6 +1145,9 @@
* high bit before displaying as ROM char.
*/
translate = set_translate(IBMPC_MAP,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = 0;
+#endif
disp_ctrl = 1;
toggle_meta = 1;
break;
@@ -1253,6 +1308,10 @@
/* console_sem is held */
static void setterm_command(int currcons)
{
+ if (sw->con_setterm_command
+ && sw->con_setterm_command(vc_cons[currcons].d))
+ return;
+
switch(par[0]) {
case 1: /* set color for underline mode */
if (can_do_color && par[1] < 16) {
@@ -1302,6 +1361,22 @@
case 14: /* set vesa powerdown interval */
vesa_off_interval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ;
break;
+#ifdef CONFIG_KANJI
+ case 98:
+ if (par[1] < 10) /* change kanji mode */
+ do_change_kanji_mode(currcons, par[1]); /* 0208 */
+ else if (par[1] == 10) { /* save restore kanji mode */
+ switch (par[2]) {
+ case 1:
+ save_cur_kanji(currcons);
+ break;
+ case 2:
+ restore_cur_kanji(currcons);
+ break;
+ }
+ }
+ break;
+#endif /* CONFIG_KANJI */
}
}
@@ -1379,8 +1454,26 @@
need_wrap = 0;
}
+#ifdef CONFIG_KANJI
+static void save_cur_kanji(int currcons)
+{
+ s_kanji_mode = kanji_mode;
+ s_kanji_jis_mode = kanji_jis_mode;
+}
+
+static void restore_cur_kanji(int currcons)
+{
+ kanji_mode = s_kanji_mode;
+ kanji_jis_mode = s_kanji_jis_mode;
+ kanji_char1 = 0;
+}
+#endif
+
enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey,
EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd,
+#ifdef CONFIG_KANJI
+ ESsetJIS, ESsetJIS2,
+#endif
ESpalette };
/* console_sem is held (except via vc_init()) */
@@ -1390,9 +1483,18 @@
bottom = video_num_lines;
vc_state = ESnormal;
ques = 0;
+#ifndef CONFIG_KANJI
translate = set_translate(LAT1_MAP,currcons);
G0_charset = LAT1_MAP;
G1_charset = GRAF_MAP;
+#else
+ translate = set_translate(JP_MAP, currcons);
+ translate_ex = 0;
+ G0_charset = JP_MAP;
+ G0_charset_ex = 0;
+ G1_charset = GRAF_MAP;
+ G1_charset_ex = 0;
+#endif
charset = 0;
need_wrap = 0;
report_mouse = 0;
@@ -1434,6 +1536,12 @@
bell_pitch = DEFAULT_BELL_PITCH;
bell_duration = DEFAULT_BELL_DURATION;
+#ifdef CONFIG_KANJI
+ kanji_mode = EUC_CODE;
+ kanji_char1 = 0;
+ kanji_jis_mode = JIS_CODE_ASCII;
+#endif
+
gotoxy(currcons,0,0);
save_cur(currcons);
if (do_clear)
@@ -1476,11 +1584,17 @@
case 14:
charset = 1;
translate = set_translate(G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G1_charset_ex;
+#endif
disp_ctrl = 1;
return;
case 15:
charset = 0;
translate = set_translate(G0_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G0_charset_ex;
+#endif
disp_ctrl = 0;
return;
case 24: case 26:
@@ -1537,6 +1651,11 @@
case ')':
vc_state = ESsetG1;
return;
+#ifdef CONFIG_KANJI
+ case '$':
+ vc_state = ESsetJIS;
+ return;
+#endif
case '#':
vc_state = EShash;
return;
@@ -1786,8 +1905,25 @@
G0_charset = IBMPC_MAP;
else if (c == 'K')
G0_charset = USER_MAP;
- if (charset == 0)
+#ifdef CONFIG_KANJI
+ G0_charset_ex = 0;
+ if (c == 'J')
+ G0_charset = JP_MAP;
+ else if (c == 'I'){
+ G0_charset = JP_MAP;
+ G0_charset_ex = 1;
+ }
+#endif /* CONFIG_KANJI */
+ if (charset == 0) {
translate = set_translate(G0_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G0_charset_ex;
+#endif
+ }
+#ifdef CONFIG_KANJI
+ kanji_jis_mode = JIS_CODE_ASCII;
+ kanji_char1 = 0;
+#endif
vc_state = ESnormal;
return;
case ESsetG1:
@@ -1799,10 +1935,51 @@
G1_charset = IBMPC_MAP;
else if (c == 'K')
G1_charset = USER_MAP;
- if (charset == 1)
+#ifdef CONFIG_KANJI
+ G1_charset_ex = 0;
+ if (c == 'J')
+ G1_charset = JP_MAP;
+ else if (c == 'I') {
+ G1_charset = JP_MAP;
+ G1_charset_ex = 1;
+ }
+#endif /* CONFIG_KANJI */
+ if (charset == 1) {
translate = set_translate(G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G1_charset_ex;
+#endif
+ }
+#ifdef CONFIG_KANJI
+ kanji_jis_mode = JIS_CODE_ASCII;
+ kanji_char1 = 0;
+#endif
+ vc_state = ESnormal;
+ return;
+#ifdef CONFIG_KANJI
+ case ESsetJIS:
+ if (c == '@')
+ kanji_jis_mode = JIS_CODE_78;
+ else if (c == 'B')
+ kanji_jis_mode = JIS_CODE_83;
+ else if (c == '('){
+ vc_state = ESsetJIS2;
+ return;
+ } else {
vc_state = ESnormal;
return;
+ }
+ vc_state = ESnormal;
+ kanji_char1 = 0;
+ return;
+ case ESsetJIS2:
+ if (c == 'D'){
+ kanji_jis_mode = JIS_CODE_90;
+ kanji_char1 = 0;
+ }
+ vc_state = ESnormal;
+ return;
+#endif /* CONIFG_KANJI */
default:
vc_state = ESnormal;
}
@@ -1834,7 +2011,7 @@
}
#endif
- int c, tc, ok, n = 0, draw_x = -1;
+ int c, tc = 0, ok, n = 0, draw_x = -1;
unsigned int currcons;
unsigned long draw_from = 0, draw_to = 0;
struct vt_struct *vt = (struct vt_struct *)tty->driver_data;
@@ -1891,48 +2068,151 @@
hide_cursor(currcons);
while (!tty->stopped && count) {
+ int realkanji = 0;
+ int kanjioverrun = 0;
c = *buf;
buf++;
n++;
count--;
- if (utf) {
- /* Combine UTF-8 into Unicode */
- /* Incomplete characters silently ignored */
- if(c > 0x7f) {
- if (utf_count > 0 && (c & 0xc0) == 0x80) {
- utf_char = (utf_char << 6) | (c & 0x3f);
- utf_count--;
- if (utf_count == 0)
- tc = c = utf_char;
- else continue;
- } else {
- if ((c & 0xe0) == 0xc0) {
- utf_count = 1;
- utf_char = (c & 0x1f);
- } else if ((c & 0xf0) == 0xe0) {
- utf_count = 2;
- utf_char = (c & 0x0f);
- } else if ((c & 0xf8) == 0xf0) {
- utf_count = 3;
- utf_char = (c & 0x07);
- } else if ((c & 0xfc) == 0xf8) {
- utf_count = 4;
- utf_char = (c & 0x03);
- } else if ((c & 0xfe) == 0xfc) {
- utf_count = 5;
- utf_char = (c & 0x01);
- } else
- utf_count = 0;
- continue;
- }
- } else {
- tc = c;
- utf_count = 0;
- }
- } else { /* no utf */
- tc = translate[toggle_meta ? (c|0x80) : c];
- }
+#ifdef CONFIG_KANJI
+ if (vc_state == ESnormal && !disp_ctrl) {
+ switch (kanji_jis_mode) {
+ case JIS_CODE_78:
+ case JIS_CODE_83:
+ case JIS_CODE_90:
+ if (utf)
+ break;
+ if (c >= 127 || c <= 0x20) {
+ kanji_char1 = 0;
+ break;
+ }
+ if (kanji_char1) {
+ tc = (((unsigned int)kanji_char1) << 8) |
+ (((unsigned int)c) & 0x007f);
+ kanji_char1 = 0;
+ realkanji = 1;
+ } else {
+ kanji_char1 = ((unsigned int)c) & 0x007f;
+ continue;
+ }
+ break;
+ case JIS_CODE_ASCII:
+ default:
+ switch (kanji_mode) {
+ case SJIS_CODE:
+ if (kanji_char1) {
+ if ((0x40 <= c && c <= 0x7E) ||
+ (0x80 <= c && c <= 0xFC)) {
+ realkanji = 1;
+ /* SJIS to JIS */
+ kanji_char1 <<= 1; /* 81H-9FH --> 22H-3EH */
+ /* EOH-EFH --> C0H-DEH */
+ c -= 0x1f; /* 40H-7EH --> 21H-5FH */
+ /* 80H-9EH --> 61H-7FH */
+ /* 9FH-FCH --> 80H-DDH */
+ if (!(c & 0x80)) {
+ if (c < 0x61)
+ c++;
+ c += 0xde;
+ }
+ c &= 0xff;
+ c += 0xa1;
+ kanji_char1 += 0x1f;
+ tc = (kanji_char1 << 8) + c;
+ tc &= 0x7f7f;
+ kanji_char1 = 0;
+ }
+ } else {
+ if ((0x81 <= c && c <= 0x9f) ||
+ (0xE0 <= c && c <= 0xEF)) {
+ realkanji = 1;
+ kanji_char1 = c;
+ continue;
+ } else if (0xA1 <= c && c <= 0xDF) {
+ tc = (unsigned int)translations[JP_MAP][c];
+ goto hankana_skip;
+ }
+ }
+ break;
+ case EUC_CODE:
+ if (utf)
+ break;
+ if (c <= 0x7f) {
+ kanji_char1 = 0;
+ break;
+ }
+ if (kanji_char1) {
+ if (kanji_char1 == 0x8e) { /* SS2 */
+ /* realkanji ha tatenai */
+ tc = (unsigned int)translations[JP_MAP][c];
+ kanji_char1 = 0;
+ goto hankana_skip;
+ } else {
+ tc = (((unsigned int)kanji_char1) << 8) |
+ (((unsigned int)c) & 0x007f);
+ kanji_char1 = 0;
+ realkanji = 1;
+ }
+ } else {
+ kanji_char1 = (unsigned int)c;
+ continue;
+ }
+ break;
+ case JIS_CODE:
+ /* to be supported */
+ break;
+ } /* switch (kanji_mode) */
+ } /* switch (kanji_jis_mode) */
+ } /* if (vc_state == ESnormal) */
+
+#endif /* CONFIG_KANJI */
+ if (!realkanji) {
+ if (utf) {
+ /* Combine UTF-8 into Unicode */
+ /* Incomplete characters silently ignored */
+ if(c > 0x7f) {
+ if (utf_count > 0 && (c & 0xc0) == 0x80) {
+ utf_char = (utf_char << 6) | (c & 0x3f);
+ utf_count--;
+ if (utf_count == 0)
+ tc = c = utf_char;
+ else continue;
+ } else {
+ if ((c & 0xe0) == 0xc0) {
+ utf_count = 1;
+ utf_char = (c & 0x1f);
+ } else if ((c & 0xf0) == 0xe0) {
+ utf_count = 2;
+ utf_char = (c & 0x0f);
+ } else if ((c & 0xf8) == 0xf0) {
+ utf_count = 3;
+ utf_char = (c & 0x07);
+ } else if ((c & 0xfc) == 0xf8) {
+ utf_count = 4;
+ utf_char = (c & 0x03);
+ } else if ((c & 0xfe) == 0xfc) {
+ utf_count = 5;
+ utf_char = (c & 0x01);
+ } else
+ utf_count = 0;
+ continue;
+ }
+ } else {
+ tc = c;
+ utf_count = 0;
+ }
+ } else { /* no utf */
+#ifndef CONFIG_KANJI
+ tc = translate[toggle_meta ? (c|0x80) : c];
+#else
+ tc = translate[(toggle_meta || translate_ex) ? (c | 0x80) : c];
+#endif
+ }
+ } /* if (!realkanji) */
+#ifdef CONFIG_KANJI
+ hankana_skip:
+#endif
/* If the original code was a control character we
* only allow a glyph to be displayed if the code is
@@ -1949,43 +2229,71 @@
: CTRL_ACTION) >> c) & 1)))
&& (c != 127 || disp_ctrl)
&& (c != 128+27);
+ ok |= realkanji;
if (vc_state == ESnormal && ok) {
- /* Now try to find out how to display it */
- tc = conv_uni_to_pc(vc_cons[currcons].d, tc);
- if ( tc == -4 ) {
+ if (!realkanji) {
+ /* Now try to find out how to display it */
+ tc = conv_uni_to_pc(vc_cons[currcons].d, tc);
+ if ( tc == -4 ) {
/* If we got -4 (not found) then see if we have
defined a replacement character (U+FFFD) */
- tc = conv_uni_to_pc(vc_cons[currcons].d, 0xfffd);
+ tc = conv_uni_to_pc(vc_cons[currcons].d, 0xfffd);
/* One reason for the -4 can be that we just
did a clear_unimap();
try at least to show something. */
- if (tc == -4)
- tc = c;
- } else if ( tc == -3 ) {
+ if (tc == -4)
+ tc = c;
+ } else if ( tc == -3 ) {
/* Bad hash table -- hope for the best */
- tc = c;
- }
- if (tc & ~charmask)
- continue; /* Conversion failed */
+ tc = c;
+ }
+ if (tc & ~charmask)
+ continue; /* Conversion failed */
+ } /* !realkanji */
if (need_wrap || decim)
FLUSH
if (need_wrap) {
cr(currcons);
lf(currcons);
+ if (kanjioverrun) {
+ x++;
+ pos += 2;
+ kanjioverrun = 0;
+ }
}
if (decim)
insert_char(currcons, 1);
+#ifndef CONFIG_KANJI
scr_writew(himask ?
((attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) :
(attr << 8) + tc,
(u16 *) pos);
+#else /* CONFIG_KANJI */
+ if (realkanji) {
+ tc = ((tc >> 8) & 0xff) | ((tc << 8) & 0xff00);
+ *((u16 *)pos) = (tc - 0x20) & 0xff7f;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ x ++;
+ pos += 2;
+ *((u16 *)pos) = (tc - 0x20) | 0x80;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ } else {
+ *((u16 *)pos) = tc & 0x00ff;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ }
+#endif /* !CONFIG_KANJI */
if (DO_UPDATE && draw_x < 0) {
draw_x = x;
draw_from = pos;
+ if (realkanji) {
+ draw_x --;
+ draw_from -= 2;
+ }
}
+#ifndef CONFIG_KANJI
if (x == video_num_columns - 1) {
need_wrap = decawm;
draw_to = pos+2;
@@ -1993,6 +2301,16 @@
x++;
draw_to = (pos+=2);
}
+#else /* CONFIG_KANJI */
+ if (x >= video_num_columns - 1) {
+ need_wrap = decawm;
+ kanjioverrun = x - video_num_columns + 1;
+ draw_to = pos + 2;
+ } else {
+ x++;
+ draw_to = (pos += 2);
+ }
+#endif /* !CONFIG_KANJI */
continue;
}
FLUSH
@@ -2419,9 +2737,17 @@
vc_cons[currcons].d->vc_palette[k++] = default_grn[j] ;
vc_cons[currcons].d->vc_palette[k++] = default_blu[j] ;
}
- def_color = 0x07; /* white */
- ulcolor = 0x0f; /* bold white */
- halfcolor = 0x08; /* grey */
+ if (pc98) {
+ def_color = 0x07; /* white */
+ def_attr = 0xE1;
+ ul_attr = 0x08; /* underline */
+ half_attr = 0x00; /* ignore half color */
+ bold_attr = 0xC1; /* yellow */
+ } else {
+ def_color = 0x07; /* white */
+ ulcolor = 0x0f; /* bold white */
+ halfcolor = 0x08; /* grey */
+ }
init_waitqueue_head(&vt_cons[currcons]->paste_wait);
reset_terminal(currcons, do_clear);
}
@@ -2462,7 +2788,12 @@
vt_cons[currcons] = (struct vt_struct *)
alloc_bootmem(sizeof(struct vt_struct));
visual_init(currcons, 1);
+#if defined CONFIG_PC9800 || defined CONFIG_FB
+ screenbuf
+ = (unsigned short *) alloc_bootmem(screenbuf_size * 2);
+#else
screenbuf = (unsigned short *) alloc_bootmem(screenbuf_size);
+#endif
kmalloced = 0;
vc_init(currcons, video_num_lines, video_num_columns,
currcons || !sw->con_save_screen);
@@ -2955,9 +3286,12 @@
/* used by selection */
u16 screen_glyph(int currcons, int offset)
{
- u16 w = scr_readw(screenpos(currcons, offset, 1));
+ vram_char_t w = scr_readw(screenpos(currcons, offset, 1));
u16 c = w & 0xff;
+ if (pc98)
+ return ((u16)(w >> 16) & 0xff00) | c;
+
if (w & hi_font_mask)
c |= 0x100;
return c;
@@ -3019,8 +3353,10 @@
EXPORT_SYMBOL(default_red);
EXPORT_SYMBOL(default_grn);
EXPORT_SYMBOL(default_blu);
+#ifndef CONFIG_PC9800
EXPORT_SYMBOL(video_font_height);
EXPORT_SYMBOL(video_scan_lines);
+#endif
EXPORT_SYMBOL(vc_resize);
EXPORT_SYMBOL(fg_console);
EXPORT_SYMBOL(console_blank_hook);
diff -urN linux/drivers/char/vt_ioctl.c linux98/drivers/char/vt_ioctl.c
--- linux/drivers/char/vt_ioctl.c Sat Oct 12 13:22:14 2002
+++ linux98/drivers/char/vt_ioctl.c Sat Oct 12 14:18:52 2002
@@ -63,9 +63,11 @@
asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
#endif
+#ifndef CONFIG_PC9800
unsigned int video_font_height;
unsigned int default_font_height;
unsigned int video_scan_lines;
+#endif
/*
* these are the valid i/o ports we're allowed to change. they map all the
@@ -637,6 +639,17 @@
return 0;
}
+#ifdef CONFIG_PC9800
+ case VT_GDC_RESIZE:
+ {
+ if (!perm)
+ return -EPERM;
+/* con_adjust_height(0);*/
+ update_screen(console);
+ return 0;
+ }
+#endif
+
case VT_SETMODE:
{
struct vt_mode tmp;
@@ -828,7 +841,9 @@
__get_user(clin, &vtconsize->v_clin);
__get_user(vcol, &vtconsize->v_vcol);
__get_user(ccol, &vtconsize->v_ccol);
+#ifndef CONFIG_PC9800
vlin = vlin ? vlin : video_scan_lines;
+#endif
if ( clin )
{
if ( ll )
@@ -853,10 +868,12 @@
if ( clin > 32 )
return -EINVAL;
+#ifndef CONFIG_PC9800
if ( vlin )
video_scan_lines = vlin;
if ( clin )
video_font_height = clin;
+#endif
return vc_resize_all(ll, cc);
}
@@ -1024,8 +1041,10 @@
vt_cons[new_console]->vt_mode.frsig = 0;
vt_cons[new_console]->vt_pid = -1;
vt_cons[new_console]->vt_newvt = -1;
+#ifndef CONFIG_PC9800
if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */
reset_palette(new_console) ;
+#endif
}
/*
diff -urN linux/include/linux/console.h linux98/include/linux/console.h
--- linux/include/linux/console.h Sat Oct 19 13:01:51 2002
+++ linux98/include/linux/console.h Mon Oct 28 11:31:37 2002
@@ -17,6 +17,13 @@
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/spinlock.h>
+#include <linux/config.h>
+
+#ifndef CONFIG_PC9800
+typedef __u16 vram_char_t;
+#else
+typedef __u32 vram_char_t;
+#endif
struct vc_data;
struct console_font_op;
@@ -32,7 +39,7 @@
void (*con_init)(struct vc_data *, int);
void (*con_deinit)(struct vc_data *);
void (*con_clear)(struct vc_data *, int, int, int, int);
- void (*con_putc)(struct vc_data *, int, int, int);
+ void (*con_putc)(struct vc_data *, int, vram_char_t, int);
void (*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
void (*con_cursor)(struct vc_data *, int);
int (*con_scroll)(struct vc_data *, int, int, int, int);
@@ -48,6 +55,7 @@
void (*con_invert_region)(struct vc_data *, u16 *, int);
u16 *(*con_screen_pos)(struct vc_data *, int);
unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
+ int (*con_setterm_command)(struct vc_data *);
};
extern const struct consw *conswitchp;
@@ -55,6 +63,7 @@
extern const struct consw dummy_con; /* dummy console buffer */
extern const struct consw fb_con; /* frame buffer based console */
extern const struct consw vga_con; /* VGA text console */
+extern const struct consw gdc_con; /* PC-9800 GDC text console */
extern const struct consw newport_con; /* SGI Newport console */
extern const struct consw prom_con; /* SPARC PROM console */
diff -urN linux/include/linux/console_struct.h linux98/include/linux/console_struct.h
--- linux/include/linux/console_struct.h Thu Oct 31 09:41:33 2002
+++ linux98/include/linux/console_struct.h Tue Nov 12 00:22:31 2002
@@ -9,6 +9,9 @@
* to achieve effects such as fast scrolling by changing the origin.
*/
+#include <linux/config.h>
+#include <linux/console.h>
+
#define NPAR 16
struct vc_data {
@@ -25,9 +28,13 @@
unsigned char vc_s_color; /* Saved foreground & background */
unsigned char vc_ulcolor; /* Color for underline mode */
unsigned char vc_halfcolor; /* Color for half intensity mode */
+ unsigned char vc_def_attr; /* Default attributes */
+ unsigned char vc_ul_attr; /* Attribute for underline mode */
+ unsigned char vc_half_attr; /* Attribute for half intensity mode */
+ unsigned char vc_bold_attr; /* Attribute for bold mode */
unsigned short vc_complement_mask; /* [#] Xor mask for mouse pointer */
unsigned short vc_hi_font_mask; /* [#] Attribute set for upper 256 chars of font or 0 if not supported */
- unsigned short vc_video_erase_char; /* Background erase character */
+ vram_char_t vc_video_erase_char; /* Background erase character */
unsigned short vc_s_complement_mask; /* Saved mouse pointer mask */
unsigned int vc_x, vc_y; /* Cursor position */
unsigned int vc_top, vc_bottom; /* Scrolling region */
@@ -82,6 +89,18 @@
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
unsigned long vc_uni_pagedir;
unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+#ifdef CONFIG_KANJI
+ unsigned char vc_kanji_char1;
+ unsigned char vc_kanji_mode;
+ unsigned char vc_kanji_jis_mode;
+ unsigned char vc_s_kanji_mode;
+ unsigned char vc_s_kanji_jis_mode;
+ unsigned int vc_translate_ex;
+ unsigned char vc_G0_charset_ex;
+ unsigned char vc_G1_charset_ex;
+ unsigned char vc_saved_G0_ex;
+ unsigned char vc_saved_G1_ex;
+#endif /* CONFIG_KANJI */
/* additional information is in vt_kern.h */
};
@@ -105,6 +124,10 @@
#define CUR_HWMASK 0x0f
#define CUR_SWMASK 0xfff0
+#ifndef CONFIG_PC9800
#define CUR_DEFAULT CUR_UNDERLINE
+#else
+#define CUR_DEFAULT CUR_BLOCK
+#endif
#define CON_IS_VISIBLE(conp) (*conp->vc_display_fg == conp)
diff -urN linux/include/linux/consolemap.h linux98/include/linux/consolemap.h
--- linux/include/linux/consolemap.h Sat Oct 19 13:02:34 2002
+++ linux98/include/linux/consolemap.h Mon Oct 21 14:19:31 2002
@@ -7,6 +7,7 @@
#define GRAF_MAP 1
#define IBMPC_MAP 2
#define USER_MAP 3
+#define JP_MAP 4
struct vc_data;
diff -urN linux/include/linux/tty.h linux98/include/linux/tty.h
--- linux/include/linux/tty.h Sat Oct 19 13:01:54 2002
+++ linux98/include/linux/tty.h Mon Oct 21 14:22:18 2002
@@ -123,6 +123,10 @@
#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
+#define VIDEO_TYPE_98NORMAL 0xa4 /* NEC PC-9800 normal */
+#define VIDEO_TYPE_9840 0xa5 /* NEC PC-9800 normal 40 lines */
+#define VIDEO_TYPE_98HIRESO 0xa6 /* NEC PC-9800 hireso */
+
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
diff -urN linux/include/linux/vt.h linux98/include/linux/vt.h
--- linux/include/linux/vt.h Sat Oct 19 13:02:30 2002
+++ linux98/include/linux/vt.h Mon Oct 21 14:26:03 2002
@@ -50,5 +50,6 @@
#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
+#define VT_GDC_RESIZE 0x5698
#endif /* _LINUX_VT_H */
diff -urN linux/include/linux/vt_buffer.h linux98/include/linux/vt_buffer.h
--- linux/include/linux/vt_buffer.h Sat Oct 19 13:02:24 2002
+++ linux98/include/linux/vt_buffer.h Mon Oct 21 14:28:40 2002
@@ -19,6 +19,10 @@
#include <asm/vga.h>
#endif
+#ifdef CONFIG_GDC_CONSOLE
+#include <asm/gdc.h>
+#endif
+
#ifndef VT_BUF_HAVE_RW
#define scr_writew(val, addr) (*(addr) = (val))
#define scr_readw(addr) (*(addr))
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCHSET 6/17] support PC-9800 against 2.5.45-ac1 (network device)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (4 preceding siblings ...)
2002-11-06 17:59 ` [PATCHSET 4/17] support PC-9800 against 2.5.45-ac1 (console) Osamu Tomita
@ 2002-11-06 18:06 ` Osamu Tomita
2002-11-06 18:19 ` [PATCHSET 7/17] support PC-9800 against 2.5.45-ac1 (FS) Osamu Tomita
` (10 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:06 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML, 'Jeff Garzik '
[-- Attachment #1: Type: text/plain, Size: 147 bytes --]
This patch adds legacy bus network cards support for PC-9800.
Most PCI network cards and PCMCIA(CardBus) cards do not need patch.
--
Osamu Tomita
[-- Attachment #2: drivers-net.patch --]
[-- Type: text/plain, Size: 51675 bytes --]
diff -Nru linux-2.5.42/drivers/net/3c509.c linux98-2.5.42/drivers/net/3c509.c
--- linux-2.5.42/drivers/net/3c509.c Tue Nov 5 10:16:20 2002
+++ linux98-2.5.42/drivers/net/3c509.c Wed Nov 6 09:24:36 2002
@@ -54,6 +54,10 @@
v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
- Increase *read_eeprom udelay to workaround oops with 2 cards.
*/
+/*
+ FIXES for PC-9800:
+ Shu Iwanaga: 3c569B(PC-9801 C-bus) support
+*/
#define DRV_NAME "3c509"
#define DRV_VERSION "1.19a"
@@ -170,7 +174,11 @@
struct pm_dev *pmdev;
#endif
};
+#ifdef CONFIG_PC9800
+static int id_port __initdata = 0x71d0;
+#else
static int id_port __initdata = 0x110; /* Start with 0x110 to avoid new sound cards.*/
+#endif
static struct net_device *el3_root_dev;
static ushort id_read_eeprom(int index);
@@ -391,6 +399,7 @@
no_pnp:
#endif /* __ISAPNP__ */
+#ifndef CONFIG_PC9800 /* Error for NEC C-bus */
/* Select an open I/O location at 0x1*0 to do contention select. */
for ( ; id_port < 0x200; id_port += 0x10) {
if (check_region(id_port, 1))
@@ -405,6 +414,7 @@
printk(" WARNING: No I/O port available for 3c509 activation.\n");
return -ENODEV;
}
+#endif /* CONFIG_PC9800 */
/* Next check for all ISA bus boards by sending the ID sequence to the
ID_PORT. We find cards past the first by setting the 'current_tag'
on cards as they are found. Cards with their tag set will not
@@ -460,7 +470,11 @@
{
unsigned int iobase = id_read_eeprom(8);
if_port = iobase >> 14;
+#ifndef CONFIG_PC9800
ioaddr = 0x200 + ((iobase & 0x1f) << 4);
+#else
+ ioaddr = 0x40d0 + ((iobase & 0x1f) << 8);
+#endif
}
irq = id_read_eeprom(9) >> 12;
@@ -484,7 +498,15 @@
outb(0xd0 + ++current_tag, id_port);
/* Activate the adaptor at the EEPROM location. */
+#ifndef CONFIG_PC9800
outb((ioaddr >> 4) | 0xe0, id_port);
+#else
+ outb((ioaddr >> 8) | 0xe0, id_port);
+ if (irq == 7)
+ irq = 6;
+ else if (irq == 15)
+ irq = 13;
+#endif
EL3WINDOW(0);
if (inw(ioaddr) != 0x6d50) {
@@ -1257,7 +1279,18 @@
outw(0x0001, ioaddr + 4);
/* Set the IRQ line. */
+#ifndef CONFIG_PC9800
outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
+#else
+ {
+ int irq = dev->irq;
+ if (irq == 6)
+ irq = 7;
+ else if (irq == 13)
+ irq = 15;
+ outw((irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
+ }
+#endif
/* Set the station address in window 2 each time opened. */
EL3WINDOW(2);
diff -Nru linux-2.5.42/drivers/net/8390.h linux98-2.5.42/drivers/net/8390.h
--- linux-2.5.42/drivers/net/8390.h Sat Oct 12 13:22:14 2002
+++ linux98-2.5.42/drivers/net/8390.h Tue Oct 15 23:03:22 2002
@@ -123,7 +123,8 @@
#define inb_p(port) in_8(port)
#define outb_p(val,port) out_8(port,val)
-#elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE)
+#elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE) || \
+ defined(CONFIG_NET_CBUS)
#define EI_SHIFT(x) (ei_local->reg_offset[x])
#else
#define EI_SHIFT(x) (x)
diff -Nru linux-2.5.42/drivers/net/Kconfig linux98-2.5.42/drivers/net/Kconfig
--- linux-2.5.42/drivers/net/Kconfig Thu Oct 31 13:23:20 2002
+++ linux98-2.5.42/drivers/net/Kconfig Sat Nov 2 15:28:46 2002
@@ -456,7 +456,7 @@
as <file:Documentation/networking/net-modules.txt>.
config EL3
- tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+ tristate "3c509/3c529 (MCA)/3c569B (98)/3c579 \"EtherLink III\" support"
depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
---help---
If you have a network (Ethernet) card belonging to the 3Com
@@ -705,7 +705,7 @@
source "drivers/net/tulip/Kconfig"
config AT1700
- tristate "AT1700/1720 support (EXPERIMENTAL)"
+ tristate "AT1700/1720/RE1000Plus(C-Bus) support (EXPERIMENTAL)"
depends on NET_ETHERNET && (ISA || MCA) && EXPERIMENTAL
---help---
If you have a network (Ethernet) card of this type, say Y and read
@@ -751,7 +751,7 @@
config NET_ISA
bool "Other ISA cards"
- depends on NET_ETHERNET && ISA
+ depends on NET_ETHERNET && ISA && !PC9800
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
@@ -949,6 +949,55 @@
the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
+config NET_CBUS
+ bool "NEC PC-9800 C-bus cards"
+ depends on NET_ETHERNET && ISA && PC9800
+ ---help---
+ If your network (Ethernet) card hasn't been mentioned yet and its
+ bus system (that's the way the cards talks to the other components
+ of your computer) is NEC PC-9800 C-Bus, say Y.
+
+config NE2K_CBUS
+ tristate "Most NE2000-based Ethernet support"
+ depends on NET_CBUS
+
+config NE2K_CBUS_EGY98
+ bool "Melco EGY-98 support"
+ depends on NE2K_CBUS
+
+config NE2K_CBUS_LGY98
+ bool "Melco LGY-98 support"
+ depends on NE2K_CBUS
+
+config NE2K_CBUS_ICM
+ bool "ICM IF-27xxET support"
+ depends on NE2K_CBUS
+
+config CONFIG_NE2K_CBUS_IOLA98
+ bool "I-O DATA LA-98 support"
+ depends on NE2K_CBUS
+
+config CONFIG_NE2K_CBUS_CNET98EL
+ bool "Contec C-NET(98)E/L support"
+ depends on NE2K_CBUS
+
+config CONFIG_NE2K_CBUS_CNET98EL_IO_BASE
+ hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
+ depends on CONFIG_NE2K_CBUS_CNET98EL
+ default "0xaaed"
+
+config CONFIG_NE2K_CBUS_ATLA98
+ bool "Allied Telesis LA-98 Support"
+ depends on NE2K_CBUS
+
+config CONFIG_NE2K_CBUS_BDN
+ bool "ELECOM Laneed LD-BDN[123]A Support"
+ depends on NE2K_CBUS
+
+config CONFIG_NE2K_CBUS_NEC108
+ bool "NEC PC-9801-108 Support"
+ depends on NE2K_CBUS
+
config SKMC
tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA
diff -Nru linux-2.5.42/drivers/net/Makefile linux98-2.5.42/drivers/net/Makefile
--- linux-2.5.42/drivers/net/Makefile Tue Nov 5 10:16:20 2002
+++ linux98-2.5.42/drivers/net/Makefile Wed Nov 6 09:24:36 2002
@@ -89,7 +89,11 @@
obj-$(CONFIG_ARM_ETHERH) += 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390.o
+ifneq ($(CONFIG_PC9800),y)
obj-$(CONFIG_NE2000) += ne.o 8390.o
+else
+obj-$(CONFIG_NE2K_CBUS) += ne.o 8390.o
+endif
obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
obj-$(CONFIG_HPLAN) += hp.o 8390.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
diff -Nru linux-2.5.42/drivers/net/Makefile.lib linux98-2.5.42/drivers/net/Makefile.lib
--- linux-2.5.42/drivers/net/Makefile.lib Sat Oct 12 13:22:18 2002
+++ linux98-2.5.42/drivers/net/Makefile.lib Tue Oct 15 23:03:22 2002
@@ -19,6 +19,7 @@
obj-$(CONFIG_MACMACE) += crc32.o
obj-$(CONFIG_MIPS_AU1000_ENET) += crc32.o
obj-$(CONFIG_NATSEMI) += crc32.o
+obj-$(CONFIG_NE2K_CBUS) += crc32.o
obj-$(CONFIG_PCMCIA_FMVJ18X) += crc32.o
obj-$(CONFIG_PCMCIA_SMC91C92) += crc32.o
obj-$(CONFIG_PCMCIA_XIRTULIP) += crc32.o
diff -Nru linux-2.5.42/drivers/net/Space.c linux98-2.5.42/drivers/net/Space.c
--- linux-2.5.42/drivers/net/Space.c Thu Oct 31 13:23:20 2002
+++ linux98-2.5.42/drivers/net/Space.c Thu Oct 31 15:17:29 2002
@@ -242,7 +242,7 @@
#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
{e2100_probe, 0},
#endif
-#ifdef CONFIG_NE2000 /* ISA (use ne2k-pci for PCI cards) */
+#if defined(CONFIG_NE2000) || defined(CONFIG_NE2K_CBUS) /* ISA & PC-9800 CBUS (use ne2k-pci for PCI cards) */
{ne_probe, 0},
#endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
diff -Nru linux-2.5.42/drivers/net/at1700.c linux98-2.5.42/drivers/net/at1700.c
--- linux-2.5.42/drivers/net/at1700.c Sat Oct 19 13:01:49 2002
+++ linux98-2.5.42/drivers/net/at1700.c Sat Oct 19 21:58:24 2002
@@ -34,6 +34,10 @@
only is it difficult to detect, it also moves around in I/O space in
response to inb()s from other device probes!
*/
+/*
+ 99/03/03 Allied Telesis RE1000 Plus support by T.Hagawa
+ 99/12/30 port to 2.3.35 by K.Takai
+*/
#include <linux/config.h>
#include <linux/module.h>
@@ -79,10 +83,17 @@
* ISA
*/
+#ifndef CONFIG_PC9800
static int at1700_probe_list[] __initdata = {
0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
};
+#else /* CONFIG_PC9800 */
+static int at1700_probe_list[] __initdata = {
+ 0x1d6, 0x1d8, 0x1da, 0x1d4, 0xd4, 0xd2, 0xd8, 0xd0, 0
+};
+
+#endif /* CONFIG_PC9800 */
/*
* MCA
*/
@@ -125,6 +136,7 @@
/* Offsets from the base address. */
+#ifndef CONFIG_PC9800
#define STATUS 0
#define TX_STATUS 0
#define RX_STATUS 1
@@ -139,6 +151,7 @@
#define TX_START 10
#define COL16CNTL 11 /* Controll Reg for 16 collisions */
#define MODE13 13
+#define RX_CTRL 14
/* Configuration registers only on the '865A/B chips. */
#define EEPROM_Ctrl 16
#define EEPROM_Data 17
@@ -147,8 +160,39 @@
#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */
#define IOCONFIG1 19
#define SAPROM 20 /* The station address PROM, if no EEPROM. */
+#define MODE24 24
#define RESET 31 /* Write to reset some parts of the chip. */
#define AT1700_IO_EXTENT 32
+#define PORT_OFFSET(o) (o)
+#else /* CONFIG_PC9800 */
+#define STATUS (0x0000)
+#define TX_STATUS (0x0000)
+#define RX_STATUS (0x0001)
+#define TX_INTR (0x0200)/* Bit-mapped interrupt enable registers. */
+#define RX_INTR (0x0201)
+#define TX_MODE (0x0400)
+#define RX_MODE (0x0401)
+#define CONFIG_0 (0x0600)/* Misc. configuration settings. */
+#define CONFIG_1 (0x0601)
+/* Run-time register bank 2 definitions. */
+#define DATAPORT (0x0800)/* Word-wide DMA or programmed-I/O dataport. */
+#define TX_START (0x0a00)
+#define COL16CNTL (0x0a01)/* Controll Reg for 16 collisions */
+#define MODE13 (0x0c01)
+#define RX_CTRL (0x0e00)
+/* Configuration registers only on the '865A/B chips. */
+#define EEPROM_Ctrl (0x1000)
+#define EEPROM_Data (0x1200)
+#define CARDSTATUS 16 /* FMV-18x Card Status */
+#define CARDSTATUS1 17 /* FMV-18x Card Status */
+#define IOCONFIG (0x1400)/* Either read the jumper, or move the I/O. */
+#define IOCONFIG1 (0x1600)
+#define SAPROM 20 /* The station address PROM, if no EEPROM. */
+#define MODE24 (0x1800)/* The station address PROM, if no EEPROM. */
+#define RESET (0x1e01)/* Write to reset some parts of the chip. */
+#define PORT_OFFSET(o) ({ int _o_ = (o); (_o_ & ~1) * 0x100 + (_o_ & 1); })
+#endif /* CONFIG_PC9800 */
+
#define TX_TIMEOUT 10
@@ -228,8 +272,20 @@
int slot, ret = -ENODEV;
struct net_local *lp;
+#ifndef CONFIG_PC9800
if (!request_region(ioaddr, AT1700_IO_EXTENT, dev->name))
return -EBUSY;
+#else
+ for (i = 0; i < 0x2000; i += 0x0200) {
+ if (!request_region(ioaddr + i, 2, dev->name)) {
+ while (i > 0) {
+ i -= 0x0200;
+ release_region(ioaddr + i, 2);
+ }
+ return -EBUSY;
+ }
+ }
+#endif
/* Resetting the chip doesn't reset the ISA interface, so don't bother.
That means we have to be careful with the register values we probe for.
@@ -320,10 +376,17 @@
/* Reset the internal state machines. */
outb(0, ioaddr + RESET);
- if (is_at1700)
+ if (is_at1700) {
+#ifndef CONFIG_PC9800
irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
| (read_eeprom(ioaddr, 0)>>14)];
- else {
+#else
+ {
+ char re1000plus_irqmap[4] = {3, 5, 6, 12};
+ irq = re1000plus_irqmap[inb(ioaddr + IOCONFIG1) >> 6];
+ }
+#endif
+ } else {
/* Check PnP mode for FMV-183/184/183A/184A. */
/* This PnP routine is very poor. IO and IRQ should be known. */
if (inb(ioaddr + CARDSTATUS1) & 0x20) {
@@ -395,18 +458,22 @@
/* Set the station address in bank zero. */
outb(0x00, ioaddr + CONFIG_1);
for (i = 0; i < 6; i++)
- outb(dev->dev_addr[i], ioaddr + 8 + i);
+ outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i));
/* Switch to bank 1 and set the multicast table to accept none. */
outb(0x04, ioaddr + CONFIG_1);
for (i = 0; i < 8; i++)
- outb(0x00, ioaddr + 8 + i);
+ outb(0x00, ioaddr + PORT_OFFSET(8 + i));
/* Switch to bank 2 */
/* Lock our I/O address, and set manual processing mode for 16 collisions. */
outb(0x08, ioaddr + CONFIG_1);
+#ifndef CONFIG_PC9800
outb(dev->if_port, ioaddr + MODE13);
+#else
+ outb(0, ioaddr + MODE13);
+#endif
outb(0x00, ioaddr + COL16CNTL);
if (net_debug)
@@ -450,7 +517,12 @@
kfree(dev->priv);
dev->priv = NULL;
err_out:
+#ifndef CONFIG_PC9800
release_region(ioaddr, AT1700_IO_EXTENT);
+#else
+ for (i = 0; i < 0x2000; i += 0x0200)
+ release_region(ioaddr + i, 2);
+#endif
return ret;
}
@@ -462,7 +534,11 @@
#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */
/* Delay between EEPROM clock transitions. */
+#ifndef CONFIG_PC9800
#define eeprom_delay() do { } while (0)
+#else
+#define eeprom_delay() __asm__ ("out%B0 %%al,%0" :: "N"(0x5f))
+#endif
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5 << 6)
@@ -545,12 +621,12 @@
inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80
? "IRQ conflict" : "network cable problem");
printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
- dev->name, inw (ioaddr + 0), inw (ioaddr + 2), inw (ioaddr + 4),
- inw (ioaddr + 6), inw (ioaddr + 8), inw (ioaddr + 10),
- inw (ioaddr + 12), inw (ioaddr + 14));
+ dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE),
+ inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START),
+ inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL));
lp->stats.tx_errors++;
/* ToDo: We should try to restart the adaptor... */
- outw (0xffff, ioaddr + 24);
+ outw(0xffff, ioaddr + MODE24);
outw (0xffff, ioaddr + TX_STATUS);
outb (0x5a, ioaddr + CONFIG_0);
outb (0xe8, ioaddr + CONFIG_1);
@@ -696,7 +772,7 @@
dev->name, inb(ioaddr + RX_MODE), status);
#ifndef final_version
if (status == 0) {
- outb(0x05, ioaddr + 14);
+ outb(0x05, ioaddr + RX_CTRL);
break;
}
#endif
@@ -716,7 +792,7 @@
dev->name, pkt_len);
/* Prime the FIFO and then flush the packet. */
inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
- outb(0x05, ioaddr + 14);
+ outb(0x05, ioaddr + RX_CTRL);
lp->stats.rx_errors++;
break;
}
@@ -726,7 +802,7 @@
dev->name, pkt_len);
/* Prime the FIFO and then flush the packet. */
inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
- outb(0x05, ioaddr + 14);
+ outb(0x05, ioaddr + RX_CTRL);
lp->stats.rx_dropped++;
break;
}
@@ -753,7 +829,7 @@
if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
break;
inw(ioaddr + DATAPORT); /* dummy status read */
- outb(0x05, ioaddr + 14);
+ outb(0x05, ioaddr + RX_CTRL);
}
if (net_debug > 5)
@@ -843,7 +919,7 @@
/* Switch to bank 1 and set the multicast table. */
outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0);
for (i = 0; i < 8; i++)
- outb(mc_filter[i], ioaddr + 8 + i);
+ outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i));
memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
outw(saved_bank, ioaddr + CONFIG_0);
}
@@ -853,7 +929,12 @@
#ifdef MODULE
static struct net_device dev_at1700;
+#ifndef CONFIG_PC9800
static int io = 0x260;
+#else
+static int io = 0xd0;
+#endif
+
static int irq;
MODULE_PARM(io, "i");
@@ -893,7 +974,15 @@
/* If we don't do this, we can't re-insmod it later. */
free_irq(dev_at1700.irq, NULL);
+#ifndef CONFIG_PC9800
release_region(dev_at1700.base_addr, AT1700_IO_EXTENT);
+#else
+ {
+ int i;
+ for (i = 0; i < 0x2000; i += 0x200)
+ release_region(dev_at1700.base_addr + i, 2);
+ }
+#endif
}
#endif /* MODULE */
MODULE_LICENSE("GPL");
diff -Nru linux-2.5.42/drivers/net/ne.c linux98-2.5.42/drivers/net/ne.c
--- linux-2.5.42/drivers/net/ne.c Sat Oct 12 13:22:07 2002
+++ linux98-2.5.42/drivers/net/ne.c Tue Oct 15 23:03:22 2002
@@ -54,6 +54,26 @@
#include <linux/etherdevice.h>
#include "8390.h"
+/* backword compatibility for kernel version 2.1.57 */
+#include <linux/version.h>
+#ifndef LINUX_VERSION_CODE
+#warning LINUX_VERSION_CODE is no defined!
+#endif
+#if LINUX_VERSION_CODE < 0x20200
+#ifdef CONFIG_PCI
+#undef CONFIG_PCI
+#endif
+#ifdef CONFIG_PC98
+#define CONFIG_PC9800
+#endif
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+#endif
+
+#ifdef CONFIG_NET_CBUS
+#undef ei_debug
+#define ei_debug 9
+#endif /* CONFIG_NET_CBUS */
+
/* Some defines that people can play with if so inclined. */
/* Do we support clones that don't adhere to 14,15 of the SAprom ? */
@@ -69,11 +89,13 @@
/* #define PACKETBUF_MEMSIZE 0x40 */
/* A zero-terminated list of I/O addresses to be probed at boot. */
+#ifndef CONFIG_NET_CBUS
#ifndef MODULE
static unsigned int netcard_portlist[] __initdata = {
0x300, 0x280, 0x320, 0x340, 0x360, 0x380, 0
};
#endif
+#endif
static struct isapnp_device_id isapnp_clone_list[] __initdata = {
{ ISAPNP_CARD_ID('A','X','E',0x2011),
@@ -94,6 +116,7 @@
/* A list of bad clones that we none-the-less recognize. */
static struct { const char *name8, *name16; unsigned char SAprefix[4];}
bad_clone_list[] __initdata = {
+#ifndef CONFIG_NET_CBUS
{"DE100", "DE200", {0x00, 0xDE, 0x01,}},
{"DE120", "DE220", {0x00, 0x80, 0xc8,}},
{"DFI1000", "DFI2000", {'D', 'F', 'I',}}, /* Original, eh? */
@@ -108,26 +131,54 @@
{"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
{"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
{"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
+#else /* CONFIG_NET_CBUS */
+ {"LA/T-98?", "LA/T-98", {0x00,0xa0,0xb0}}, /* I/O Data */
+ {"EGY-98?", "EGY-98", {0x00,0x40,0x26}}, /* Melco EGY98 */
+ {"ICM?", "ICM-27xx-ET", {0x00,0x80,0xc8}}, /* ICM IF-27xx-ET */
+ {"CNET-98/EL?", "CNET(98)E/L", {0x00,0x80,0x4C}}, /* Contec CNET-98/EL */
+#endif
{0,}
};
#endif
/* ---- No user-serviceable parts below ---- */
+#define NE_SHIFT(x) EI_SHIFT(x)
#define NE_BASE (dev->base_addr)
-#define NE_CMD 0x00
-#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */
-#define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */
+#define NE_CMD NE_SHIFT(0x00)
+#define NE_DATAPORT NE_SHIFT(0x10) /* NatSemi-defined port window offset. */
+#ifndef CONFIG_NET_CBUS
+#define NE_RESET NE_SHIFT(0x1f) /* Issue a read to reset, a write to clear. */
+#else
+#define NE_RESET NE_SHIFT(0x11) /* Issue a read to reset, a write to clear. */
+#endif
+
#define NE_IO_EXTENT 0x20
#define NE1SM_START_PG 0x20 /* First page of TX buffer */
#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */
#define NESM_START_PG 0x40 /* First page of TX buffer */
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+#ifndef CONFIG_NE2K_CBUS_CNET98EL_IO_BASE
+#warning CONFIG_NE2K_CBUS_CNET98EL_IO_BASE is not defined(config error?)
+#warning use 0xaaed as default
+#define CONFIG_NE2K_CBUS_CNET98EL_IO_BASE 0xaaed /* or 0x55ed */
+#endif
+#define CNET98EL_START_PG 0x00
+#define CNET98EL_STOP_PG 0x40
+#endif
+
+#ifdef CONFIG_NET_CBUS
+#include "ne2k_cbus.h"
+#endif
int ne_probe(struct net_device *dev);
static int ne_probe1(struct net_device *dev, int ioaddr);
static int ne_probe_isapnp(struct net_device *dev);
+#ifdef CONFIG_NET_CBUS
+static int ne_probe_cbus(struct net_device *dev, const struct ne2k_cbus_hwinfo *hw, int ioaddr);
+#endif
static int ne_open(struct net_device *dev);
static int ne_close(struct net_device *dev);
@@ -162,6 +213,8 @@
E2010 starts at 0x100 and ends at 0x4000.
E2010-x starts at 0x100 and ends at 0xffff. */
+#ifndef CONFIG_NET_CBUS
+
int __init ne_probe(struct net_device *dev)
{
unsigned int base_addr = dev->base_addr;
@@ -190,6 +243,95 @@
return -ENODEV;
}
+#else /* CONFIG_NET_CBUS */
+
+int __init ne_probe(struct net_device *dev)
+{
+ unsigned int base_addr = dev->base_addr;
+
+ SET_MODULE_OWNER(dev);
+
+ if (ei_debug > 2)
+ printk(KERN_DEBUG "ne_probe(): entered.\n");
+
+ /* If CONFIG_NET_CBUS,
+ we need dev->priv->reg_offset BEFORE to probe */
+ if (ne2k_cbus_init(dev) != 0) {
+ return -ENOMEM;
+ }
+
+ /* First check any supplied i/o locations. User knows best. <cough> */
+ if (base_addr > 0) {
+ int result;
+ const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
+
+ if (ei_debug > 2)
+ printk(KERN_DEBUG "ne_probe(): call ne_probe_cbus(base_addr=0x%x)\n", base_addr);
+
+ result = ne_probe_cbus(dev, hw, base_addr);
+ if (result != 0)
+ ne2k_cbus_destroy(dev);
+
+ return result;
+ }
+
+ if (ei_debug > 2)
+ printk(KERN_DEBUG "ne_probe(): base_addr is not specified.\n");
+
+#ifndef MODULE
+ /* Last resort. The semi-risky C-Bus auto-probe. */
+ if (ei_debug > 2)
+ printk(KERN_DEBUG "ne_probe(): auto-probe start.\n");
+
+ {
+ const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
+
+ if (hw && hw->hwtype) {
+ const unsigned short *plist;
+ for (plist = hw->portlist; *plist; plist++) {
+ const struct ne2k_cbus_region *rlist;
+ for (rlist = hw->regionlist; rlist->range; rlist++) {
+ if (check_region(*plist+rlist->start, rlist->range))
+ break;
+ }
+ if (rlist->range) {
+ /* check_region() failed */
+ continue; /* try next base port */
+ }
+ /* check_region() succeeded */
+ if (ne_probe_cbus(dev,hw,*plist) == 0)
+ return 0;
+ }
+ }else{
+ for (hw = &ne2k_cbus_hwinfo_list[0]; hw->hwtype; hw++) {
+ const unsigned short *plist;
+ for(plist=hw->portlist; *plist; plist++){
+ const struct ne2k_cbus_region *rlist;
+
+ for (rlist = hw->regionlist; rlist->range; rlist++) {
+ if (check_region(*plist+rlist->start, rlist->range))
+ break;
+ }
+ if (rlist->range) {
+ /* check_region() failed */
+ continue; /* try next base port */
+ }
+ /* check_region() succeeded */
+ if (ne_probe_cbus(dev,hw,*plist) == 0)
+ return 0;
+ }
+ }
+ }
+ }
+#endif
+
+ ne2k_cbus_destroy(dev);
+
+ return -ENODEV;
+}
+
+#endif /* CONFIG_NET_CBUS */
+
static int __init ne_probe_isapnp(struct net_device *dev)
{
int i;
@@ -231,42 +373,127 @@
return -ENODEV;
}
+#ifdef CONFIG_NET_CBUS
+static int __init ne_probe_cbus(struct net_device *dev, const struct ne2k_cbus_hwinfo *hw, int ioaddr)
+{
+ if (ei_debug > 2)
+ printk(KERN_DEBUG "ne_probe_cbus(): entered. (called from %p)\n",
+ __builtin_return_address(0));
+
+ if (hw && hw->hwtype) {
+ ne2k_cbus_set_hwtype(dev, hw, ioaddr);
+ return ne_probe1(dev, ioaddr);
+ } else {
+ /* auto detect */
+
+ printk(KERN_DEBUG "ne_probe_cbus(): try to determine hardware types.\n");
+ for (hw = &ne2k_cbus_hwinfo_list[0]; hw->hwtype; hw++) {
+ ne2k_cbus_set_hwtype(dev, hw, ioaddr);
+ if (ne_probe1(dev, ioaddr)==0)
+ return 0;
+ }
+ }
+ return ENODEV;
+}
+#endif /* CONFIG_NET_CBUS */
+
static int __init ne_probe1(struct net_device *dev, int ioaddr)
{
int i;
unsigned char SA_prom[32];
+#ifndef CONFIG_NET_CBUS /* if CONFIG_NET_CBUS, wordlength is always 2! */
int wordlength = 2;
+#endif
const char *name = NULL;
int start_page, stop_page;
+#ifndef CONFIG_NET_CBUS
int neX000, ctron, copam, bad_card;
+#else
+ int neX000, bad_card;
+#endif
int reg0, ret;
static unsigned version_printed;
+#ifdef CONFIG_NET_CBUS
+ const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+#endif
+#ifdef CONFIG_NET_CBUS
+ if (ei_debug > 2) {
+ printk(KERN_DEBUG "ne_probe1(): entered\n"
+ "ioaddr=0x%x, hardware_type = %d(%s)\n"
+ "ei_local->reg_offset = \n"
+ "{ 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, \n"
+ " 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, 0x%04x, \n"
+ " 0x%04x, 0x%04x }\n",
+ ioaddr, hw->hwtype, hw->hwident,
+ ei_local->reg_offset[0], ei_local->reg_offset[1],
+ ei_local->reg_offset[2], ei_local->reg_offset[3],
+ ei_local->reg_offset[4], ei_local->reg_offset[5],
+ ei_local->reg_offset[6], ei_local->reg_offset[7],
+ ei_local->reg_offset[8], ei_local->reg_offset[9],
+ ei_local->reg_offset[10], ei_local->reg_offset[11],
+ ei_local->reg_offset[12], ei_local->reg_offset[13],
+ ei_local->reg_offset[14], ei_local->reg_offset[15],
+ ei_local->reg_offset[16], ei_local->reg_offset[17]);
+ }
+#endif
+
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+ if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_CNET98EL) {
+ outb_p(0, CONFIG_NE2K_CBUS_CNET98EL_IO_BASE);
+ /* udelay(5000); */
+ outb_p(1, CONFIG_NE2K_CBUS_CNET98EL_IO_BASE);
+ /* udelay(5000); */
+ outb_p((ioaddr & 0xf000) >> 8 | 0x08 | 0x01, CONFIG_NE2K_CBUS_CNET98EL_IO_BASE + 2);
+ /* udelay(5000); */
+ }
+#endif
+
+#ifndef CONFIG_NET_CBUS
if (!request_region(ioaddr, NE_IO_EXTENT, dev->name))
return -EBUSY;
+#else /* CONFIG_NET_CBUS */
+ {
+ const struct ne2k_cbus_region *rlist;
+ for (rlist = hw->regionlist; rlist->range; rlist++) {
+ if (!request_region(ioaddr + rlist->start,
+ rlist->range, dev->name))
+ return -EBUSY;
+ }
+ }
+#endif /* !CONFIG_NET_CBUS */
- reg0 = inb_p(ioaddr);
+ reg0 = inb_p(ioaddr + NE_SHIFT(0));
if (reg0 == 0xFF) {
ret = -ENODEV;
goto err_out;
}
/* Do a preliminary verification that we have a 8390. */
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+ if (hw->hwtype != NE2K_CBUS_HARDWARE_TYPE_CNET98EL)
+#endif
{
int regd;
outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
- regd = inb_p(ioaddr + 0x0d);
- outb_p(0xff, ioaddr + 0x0d);
+ regd = inb_p(ioaddr + NE_SHIFT(0x0d));
+ outb_p(0xff, ioaddr + NE_SHIFT(0x0d));
outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
if (inb_p(ioaddr + EN0_COUNTER0) != 0) {
outb_p(reg0, ioaddr);
- outb_p(regd, ioaddr + 0x0d); /* Restore the old values. */
+ outb_p(regd, ioaddr + NE_SHIFT(0x0d)); /* Restore the old values. */
ret = -ENODEV;
goto err_out;
}
}
+#ifdef CONFIG_NET_CBUS
+ if (ei_debug > 2)
+ printk(KERN_DEBUG "ne_probe1(): 8390 verification passed.\n");
+#endif
+
if (ei_debug && version_printed++ == 0)
printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
@@ -285,6 +512,11 @@
{
unsigned long reset_start_time = jiffies;
+#ifdef CONFIG_NET_CBUS
+ /* derived from CNET98EL-patch for bad clones */
+ outb_p(E8390_NODMA | E8390_STOP, ioaddr+E8390_CMD);
+#endif
+
/* DON'T change these to inb_p/outb_p or reset will fail on clones. */
outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
@@ -303,15 +535,130 @@
outb_p(0xff, ioaddr + EN0_ISR); /* Ack all intr. */
}
+#ifdef CONFIG_NE2K_CBUS_ICM
+#if 0 /* obsoleted */
+ if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_ICM) {
+ static const char pat[32] ="AbcdeFghijKlmnoPqrstUvwxyZ789012";
+ char buf[sizeof(pat)];
+ int maxwait = 200;
+
+ if (ei_debug > 2) {
+ printk(" [ICM-specific initialize...");
+ }
+
+ inb(ioaddr + EN0_ISR);
+ outb_p(E8390_RXOFF, ioaddr+EN0_RXCR);
+ outb_p(0x1| 0x40 | 0x8, ioaddr+EN0_DCFG); /* ENDCFG_WTS|ENDCFG_FT1|ENDCFG_LS */
+ outb_p(16384 / 256, ioaddr + EN0_STARTPG);
+ outb_p(32768 / 256, ioaddr + EN0_STOPPG);
+ ne2k_cbus_writemem(dev, ioaddr, 16384, pat, sizeof(pat));
+ while ((inb(ioaddr+EN0_ISR) & ENISR_RDC) != ENISR_RDC
+ && --maxwait)
+ ;
+ if (ei_debug > 2) {
+ printk("write pat...");
+ }
+ ne2k_cbus_readmem(dev, ioaddr, 16384, buf, sizeof(pat));
+ if (ei_debug>2) {
+ printk("read pat...");
+ }
+ if (memcmp(pat, buf, sizeof(pat))) {
+ if (ei_debug > 2) {
+ printk("compare failed.)");
+ }
+ printk(" memory failure\n");
+ return ENODEV;
+ }
+ if (ei_debug > 2) {
+ printk("compare ok...");
+ }
+ ne2k_cbus_readmem(dev, ioaddr, 0, SA_prom, 32);
+ outb(0xff, ioaddr+EN0_ISR);
+ printk("done)");
+ }
+ else
+#endif
+#endif /* CONFIG_NE2K_CBUS_ICM */
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+ if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_CNET98EL) {
+ static const char pat[32] ="AbcdeFghijKlmnoPqrstUvwxyZ789012";
+ char buf[32];
+ int maxwait = 200;
+
+ if (ei_debug > 2) {
+ printk(" [CNET98EL-specific initialize...");
+ }
+ outb_p(E8390_NODMA | E8390_STOP, ioaddr+E8390_CMD); /* 0x20|0x1 */
+ i=inb(ioaddr);
+ if ((i & ~0x2) != (0x20 | 0x01))
+ return ENODEV;
+ if ((inb(ioaddr + 0x7) & 0x80) != 0x80)
+ return ENODEV;
+ outb_p(E8390_RXOFF, ioaddr+EN0_RXCR); /* out(ioaddr+0xc, 0x20) */
+ /* outb_p(ENDCFG_WTS|ENDCFG_FT1|ENDCFG_LS, ioaddr+EN0_DCFG); */
+ outb_p(ENDCFG_WTS|0x48, ioaddr+EN0_DCFG); /* 0x49 */
+ outb_p(CNET98EL_START_PG, ioaddr+EN0_STARTPG);
+ outb_p(CNET98EL_STOP_PG, ioaddr+EN0_STOPPG);
+ if (ei_debug > 2) {
+ printk("memory check");
+ }
+ for (i = 0; i < 65536; i += 1024) {
+ if (ei_debug > 2) {
+ printk(" %04x",i);
+ }
+ ne2k_cbus_writemem(dev,ioaddr, i, pat, 32);
+ while (((inb(ioaddr + EN0_ISR) & ENISR_RDC) != ENISR_RDC) && --maxwait)
+ ;
+ ne2k_cbus_readmem(dev, ioaddr, i, buf, 32);
+ if (memcmp(pat, buf, 32)) {
+ if (ei_debug > 2) {
+ printk(" failed.");
+ }
+ break;
+ }
+ }
+ if (i != 16384) {
+ if (ei_debug > 2) {
+ printk("] ");
+ }
+ printk("memory failure at %x\n", i);
+ return ENODEV;
+ }
+ if (ei_debug > 2) {
+ printk(" good...");
+ }
+ if (!dev->irq) {
+ if (ei_debug > 2) {
+ printk("] ");
+ }
+ printk("IRQ must be specified for C-NET(98)E/L. probe failed.\n");
+ return ENODEV;
+ }
+ outb((dev->irq>5) ? (dev->irq&4):(dev->irq>>1), ioaddr + (0x2 | 0x400));
+ outb(0x7e, ioaddr + (0x4 | 0x400));
+ ne2k_cbus_readmem(dev, ioaddr, 16384, SA_prom, 32);
+ outb(0xff, ioaddr + EN0_ISR);
+ if (ei_debug > 2) {
+ printk("done]");
+ }
+ } else
+#endif /* CONFIG_NE2K_CBUS_CNET98EL */
/* Read the 16 bytes of station address PROM.
We must first initialize registers, similar to NS8390_init(eifdev, 0).
We can't reliably read the SAPROM address without this.
(I learned the hard way!). */
{
- struct {unsigned char value, offset; } program_seq[] =
+ struct {unsigned char value; unsigned short offset;} program_seq[] =
{
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+#ifndef CONFIG_NET_CBUS
{0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
+#else
+ /* NEC PC-9800: some board can only handle word-wide access? */
+ {0x48 | ENDCFG_WTS, EN0_DCFG}, /* Set word-wide (0x48) access. */
+ {16384 / 256, EN0_STARTPG},
+ {32768 / 256, EN0_STOPPG},
+#endif
{0x00, EN0_RCNTLO}, /* Clear the count regs. */
{0x00, EN0_RCNTHI},
{0x00, EN0_IMR}, /* Mask completion irq. */
@@ -325,17 +672,44 @@
{E8390_RREAD+E8390_START, E8390_CMD},
};
+#ifdef CONFIG_NET_CBUS
+ if (ei_debug > 2) {
+ printk(" [outb_p");
+ }
+#endif
+
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
+#ifdef CONFIG_NET_CBUS
+ {
+ if (ei_debug > 2)
+ printk("(0x%x,0x%x)",program_seq[i].value, ioaddr + program_seq[i].offset);
+#endif
outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
-
- }
+#ifdef CONFIG_NET_CBUS
+ }
+ if (ei_debug > 2)
+ printk("]");
+#endif
+#ifndef CONFIG_NET_CBUS
for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) {
SA_prom[i] = inb(ioaddr + NE_DATAPORT);
SA_prom[i+1] = inb(ioaddr + NE_DATAPORT);
if (SA_prom[i] != SA_prom[i+1])
wordlength = 1;
}
+#else
+ insw(ioaddr + NE_DATAPORT, SA_prom, 32 >> 1);
+#endif
+ }
+
+ if (ei_debug > 2) {
+ printk("[SA_prom[]={ ");
+ for (i = 0; i < 32; i++) printk("%02x ", SA_prom[i]);
+ printk("}]");
+ }
+
+#ifndef CONFIG_NET_CBUS
if (wordlength == 2)
{
for (i = 0; i < 16; i++)
@@ -348,8 +722,24 @@
start_page = NE1SM_START_PG;
stop_page = NE1SM_STOP_PG;
}
+#else
+ for (i = 0; i < 16; i++)
+ SA_prom[i] = SA_prom[i + i];
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+ if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_CNET98EL) {
+ start_page = CNET98EL_START_PG;
+ stop_page = CNET98EL_STOP_PG;
+ } else {
+#endif
+ start_page = NESM_START_PG;
+ stop_page = NESM_STOP_PG;
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+ }
+#endif
+#endif
neX000 = (SA_prom[14] == 0x57 && SA_prom[15] == 0x57);
+#ifndef CONFIG_NET_CBUS
ctron = (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d);
copam = (SA_prom[14] == 0x49 && SA_prom[15] == 0x00);
@@ -363,6 +753,11 @@
start_page = 0x01;
stop_page = (wordlength == 2) ? 0x40 : 0x20;
}
+#else
+ if (neX000){
+ name = "NE2000-compat";
+ }
+#endif
else
{
#ifdef SUPPORT_NE_BAD_CLONES
@@ -374,12 +769,16 @@
SA_prom[1] == bad_clone_list[i].SAprefix[1] &&
SA_prom[2] == bad_clone_list[i].SAprefix[2])
{
+#ifndef CONFIG_NET_CBUS
if (wordlength == 2)
{
name = bad_clone_list[i].name16;
} else {
name = bad_clone_list[i].name8;
}
+#else
+ name = bad_clone_list[i].name16;
+#endif
break;
}
}
@@ -387,6 +786,12 @@
{
printk(" not found (invalid signature %2.2x %2.2x).\n",
SA_prom[14], SA_prom[15]);
+#ifdef CONFIG_NET_CBUS
+ if (ei_debug > 2) {
+ printk(KERN_DEBUG "PROM prefix is: %2.2x %2.2x %2.2x\n",
+ SA_prom[0], SA_prom[1], SA_prom[2]);
+ }
+#endif
ret = -ENXIO;
goto err_out;
}
@@ -409,10 +814,18 @@
dev->irq = probe_irq_off(cookie);
if (ei_debug > 2)
printk(" autoirq is %d\n", dev->irq);
- } else if (dev->irq == 2)
+ } else
+#ifndef CONFIG_PC9800
+ if (dev->irq == 2)
/* Fixup for users that don't know that IRQ 2 is really IRQ 9,
or don't know which one to set. */
dev->irq = 9;
+#else
+ if (dev->irq == 7)
+ /* Fixup for users that don't know that IRQ 7 is really IRQ 11,
+ or don't know which one to set. */
+ dev->irq = 11;
+#endif
if (! dev->irq) {
printk(" failed to detect IRQ line.\n");
@@ -443,13 +856,22 @@
dev->dev_addr[i] = SA_prom[i];
}
+#ifndef CONFIG_NET_CBUS
printk("\n%s: %s found at %#x, using IRQ %d.\n",
dev->name, name, ioaddr, dev->irq);
+#else
+ printk("\n%s: %s found at %#x, hardware type %d(%s), using IRQ %d.\n",
+ dev->name, name, ioaddr, hw->hwtype, hw->hwident, dev->irq);
+#endif
ei_status.name = name;
ei_status.tx_start_page = start_page;
ei_status.stop_page = stop_page;
+#ifndef CONFIG_NET_CBUS
ei_status.word16 = (wordlength == 2);
+#else
+ ei_status.word16 = (2 == 2); /* wordlength is always 2 */
+#endif
ei_status.rx_start_page = start_page + TX_PAGES;
#ifdef PACKETBUF_MEMSIZE
@@ -468,10 +890,23 @@
return 0;
err_out_kfree:
+#ifndef CONFIG_NET_CBUS
kfree(dev->priv);
dev->priv = NULL;
+#else
+ ne2k_cbus_destroy(dev);
+#endif
err_out:
+#ifndef CONFIG_NET_CBUS
release_region(ioaddr, NE_IO_EXTENT);
+#else
+ {
+ const struct ne2k_cbus_region *rlist;
+ for (rlist = hw->regionlist; rlist->range; rlist++) {
+ release_region(ioaddr + rlist->start, rlist->range);
+ }
+ }
+#endif
return ret;
}
@@ -495,10 +930,18 @@
static void ne_reset_8390(struct net_device *dev)
{
unsigned long reset_start_time = jiffies;
+#ifdef CONFIG_NET_CBUS
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+#endif
if (ei_debug > 1)
printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
+#ifdef CONFIG_NET_CBUS
+ /* derived from CNET98EL-patch for bad clones... */
+ outb_p(E8390_NODMA | E8390_STOP, NE_BASE + E8390_CMD); /* 0x20 | 0x1 */
+#endif
+
/* DON'T change these to inb_p/outb_p or reset will fail on clones. */
outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
@@ -521,6 +964,9 @@
static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
{
int nic_base = dev->base_addr;
+#ifdef CONFIG_NET_CBUS
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+#endif
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
@@ -563,6 +1009,9 @@
#endif
int nic_base = dev->base_addr;
char *buf = skb->data;
+#ifdef CONFIG_NET_CBUS
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+#endif
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing)
@@ -573,6 +1022,15 @@
return;
}
ei_status.dmaing |= 0x01;
+
+#ifdef CONFIG_NET_CBUS
+ /* derived from ICM-patch */
+ /* round up count to a word */
+ if (count & 1) {
+ count++;
+ }
+#endif
+
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
outb_p(count & 0xff, nic_base + EN0_RCNTLO);
outb_p(count >> 8, nic_base + EN0_RCNTHI);
@@ -630,6 +1088,9 @@
#ifdef NE_SANITY_CHECK
int retries = 0;
#endif
+#ifdef CONFIG_NET_CBUS
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+#endif
/* Round the count up for word writes. Do we need to do this?
What effect will an odd byte count have on the 8390?
@@ -730,16 +1191,25 @@
#ifdef MODULE
#define MAX_NE_CARDS 4 /* Max number of NE cards per module */
static struct net_device dev_ne[MAX_NE_CARDS];
-static int io[MAX_NE_CARDS];
-static int irq[MAX_NE_CARDS];
-static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
+static int __initdata io[MAX_NE_CARDS];
+static int __initdata irq[MAX_NE_CARDS];
+static int __initdata bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
+#ifdef CONFIG_PC9800
+static int __initdata hwtype[MAX_NE_CARDS] = { 0, }; /* board type */
+#endif
MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
MODULE_PARM(irq, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
MODULE_PARM(bad, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
+#ifdef CONFIG_PC9800
+MODULE_PARM(hwtype, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
+#endif
MODULE_PARM_DESC(io, "I/O base address(es),required");
MODULE_PARM_DESC(irq, "IRQ number(s)");
MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures");
+#ifdef CONFIG_PC9800
+MODULE_PARM_DESC(hwtype, "Board type of PC-9800 C-Bus NIC");
+#endif
MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver");
MODULE_LICENSE("GPL");
@@ -757,6 +1227,9 @@
dev->irq = irq[this_dev];
dev->mem_end = bad[this_dev];
dev->base_addr = io[this_dev];
+#ifdef CONFIG_PC9800
+ dev->mem_start = hwtype[this_dev];
+#endif
dev->init = ne_probe;
if (register_netdev(dev) == 0) {
found++;
@@ -781,14 +1254,30 @@
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = &dev_ne[this_dev];
if (dev->priv != NULL) {
+#ifndef CONFIG_NET_CBUS
void *priv = dev->priv;
+#endif
struct pci_dev *idev = (struct pci_dev *)ei_status.priv;
if (idev)
idev->deactivate(idev);
free_irq(dev->irq, dev);
+#ifndef CONFIG_NET_CBUS
release_region(dev->base_addr, NE_IO_EXTENT);
+#else /* CONFIG_NET_CBUS */
+ {
+ const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
+ const struct ne2k_cbus_region *rlist;
+ for (rlist = hw->regionlist; rlist->range; rlist++) {
+ release_region(dev->base_addr + rlist->start, rlist->range);
+ }
+ }
+#endif /* !CONFIG_NET_CBUS */
unregister_netdev(dev);
+#ifndef CONFIG_NET_CBUS
kfree(priv);
+#else
+ ne2k_cbus_destroy(dev);
+#endif
}
}
}
diff -Nru linux-2.5.42/drivers/net/ne2k_cbus.h linux98-2.5.42/drivers/net/ne2k_cbus.h
--- linux-2.5.42/drivers/net/ne2k_cbus.h Thu Jan 1 09:00:00 1970
+++ linux98-2.5.42/drivers/net/ne2k_cbus.h Sat Oct 26 14:26:13 2002
@@ -0,0 +1,467 @@
+/* ne2k_cbus.h:
+ vender-specific information definition for NEC PC-9800
+ C-bus Ethernet Cards
+ Used in ne.c
+
+ (C)1998,1999 KITAGWA Takurou & Linux/98 project
+*/
+
+#include <linux/config.h>
+
+/* Hardware type definition (derived from *BSD) */
+#define NE2K_CBUS_HARDWARE_TYPE_MASK 0xff
+
+/* 0: reserved for auto-detect */
+/* 1: (not tested)
+ Allied Telesis CentreCom LA-98-T */
+#define NE2K_CBUS_HARDWARE_TYPE_ATLA98 1
+/* 2: (not tested)
+ ELECOM Laneed
+ LD-BDN[123]A
+ PLANET SMART COM 98 EN-2298-C
+ MACNICA ME98 */
+#define NE2K_CBUS_HARDWARE_TYPE_BDN 2
+/* 3:
+ Melco EGY-98
+ Contec C-NET(98)E*A/L*A,C-NET(98)P */
+#define NE2K_CBUS_HARDWARE_TYPE_EGY98 3
+/* 4:
+ Melco LGY-98,IND-SP,IND-SS
+ MACNICA NE2098 */
+#define NE2K_CBUS_HARDWARE_TYPE_LGY98 4
+/* 5:
+ ICM DT-ET-25,DT-ET-T5,IF-2766ET,IF-2771ET
+ PLANET SMART COM 98 EN-2298-T,EN-2298P-T
+ D-Link DE-298PT,DE-298PCAT
+ ELECOM Laneed LD-98P */
+#define NE2K_CBUS_HARDWARE_TYPE_ICM 5
+/* 6: (reserved for SIC-98, which is not supported in this driver.) */
+/* 7: (unused in *BSD?)
+ <Original NE2000 compatible>
+ <for PCI/PCMCIA cards>
+*/
+#define NE2K_CBUS_HARDWARE_TYPE_NE2K 7
+/* 8: (not tested)
+ NEC PC-9801-108 */
+#define NE2K_CBUS_HARDWARE_TYPE_NEC108 8
+/* 9:
+ I-O DATA LA-98,LA/T-98 */
+#define NE2K_CBUS_HARDWARE_TYPE_IOLA98 9
+/* 10: (reserved for C-NET(98), which is not supported in this driver.) */
+/* 11:
+ Contec C-NET(98)E,L */
+#define NE2K_CBUS_HARDWARE_TYPE_CNET98EL 11
+
+#define NE2K_CBUS_HARDWARE_TYPE_MAX 11
+
+/* HARDWARE TYPE ID 12-31: reserved */
+
+struct ne2k_cbus_offsetinfo {
+ unsigned short skip;
+ unsigned short offset8; /* +0x8 - +0xf */
+ unsigned short offset10; /* +0x10 */
+ unsigned short offset1f; /* +0x1f */
+};
+
+struct ne2k_cbus_region {
+ unsigned short start;
+ short range;
+};
+
+struct ne2k_cbus_hwinfo {
+ const unsigned short hwtype;
+ const unsigned char *hwident;
+#ifndef MODULE
+ const unsigned short *portlist;
+#endif
+ const struct ne2k_cbus_offsetinfo *offsetinfo;
+ const struct ne2k_cbus_region *regionlist;
+};
+
+/* XXX */
+/* we can't use first __initdata with const? */
+static struct {} ne2k_cbus_dummy_for_initdata __attribute__((unused)) __initdata = {};
+
+#ifdef CONFIG_NE2K_CBUS_ATLA98
+#ifndef MODULE
+static const unsigned short atla98_portlist[] __initdata = {
+ 0xd0,
+ 0
+};
+#endif
+#define atla98_offsetinfo ne2k_offsetinfo
+#define atla98_regionlist ne2k_regionlist
+#endif /* CONFIG_NE2K_CBUS_ATLA98 */
+
+#ifdef CONFIG_NE2K_CBUS_BDN
+#ifndef MODULE
+static const unsigned short bdn_portlist[] __initdata = {
+ 0xd0,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo bdn_offsetinfo __initdata = {
+#if 0
+ /* comes from FreeBSD(98) ed98.h */
+ 0x1000, 0x8000, 0x100, 0xc200 /* ??? */
+#else
+ /* comes from NetBSD/pc98 if_ne_isa.c */
+ 0x1000, 0x8000, 0x100, 0x7f00 /* ??? */
+#endif
+};
+static const struct ne2k_cbus_region bdn_regionlist[] __initdata = {
+ {0x0,1},{0x1000,1},{0x2000,1},{0x3000,1},
+ {0x4000,1},{0x5000,1},{0x6000,1},{0x7000,1},
+ {0x8000,1},{0x9000,1},{0xa000,1},{0xb000,1},
+ {0xc000,1},{0xd000,1},{0xe000,1},{0xf000,1},{0x100,1},{0x7f00,1},
+ {0x0,0}
+};
+#endif /* CONFIG_NE2K_CBUS_BDN */
+
+#ifdef CONFIG_NE2K_CBUS_EGY98
+#ifndef MODULE
+static const unsigned short egy98_portlist[] __initdata = {
+ 0xd0,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo egy98_offsetinfo __initdata = {
+ 0x02, 0x100, 0x200, 0x300
+};
+static const struct ne2k_cbus_region egy98_regionlist[] __initdata = {
+ {0x0,1}, {0x2,1}, {0x4,1}, {0x6,1}, {0x8,1}, {0xa,1}, {0xc,1}, {0xe,1},
+ {0x100,1}, {0x102,1}, {0x104,1}, {0x106,1},
+ {0x108,1}, {0x10a,1}, {0x10c,1}, {0x10e,1},
+ {0x200,1}, {0x300,1},
+ {0x0,0}
+};
+#endif /* CONFIG_NE2K_CBUS_EGY98 */
+
+#ifdef CONFIG_NE2K_CBUS_LGY98
+#ifndef MODULE
+static const unsigned short lgy98_portlist[] __initdata = {
+ 0xd0, 0x10d0, 0x20d0, 0x30d0, 0x40d0, 0x50d0, 0x60d0, 0x70d0,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo lgy98_offsetinfo __initdata = {
+ 0x01, 0x08, 0x200, 0x300
+};
+static const struct ne2k_cbus_region lgy98_regionlist[] __initdata = {
+ {0x0,16}, {0x200,1}, {0x300,1},
+ {0x0,0}
+};
+#endif /* CONFIG_NE2K_CBUS_LGY98 */
+
+#ifdef CONFIG_NE2K_CBUS_ICM
+#ifndef MODULE
+static const unsigned short icm_portlist[] __initdata = {
+ /* ICM */
+ 0x56d0,
+ /* LD-98PT */
+ 0x46d0, 0x66d0, 0x76d0, 0x86d0, 0x96d0, 0xa6d0, 0xb6d0, 0xc6d0,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo icm_offsetinfo __initdata = {
+ 0x01, 0x08, 0x100, 0x10f
+};
+static const struct ne2k_cbus_region icm_regionlist[] __initdata = {
+ {0x0,16}, {0x100,16},
+ {0x0,0}
+};
+#endif /* CONFIG_NE2K_CBUS_ICM */
+
+#if defined(CONFIG_NE2K_CBUS_NE2K) && !defined(MODULE)
+static const unsigned short ne2k_portlist[] __initdata = {
+ 0xd0, 0x300, 0x280, 0x320, 0x340, 0x360, 0x380,
+ 0
+};
+#endif
+#if defined(CONFIG_NE2K_CBUS_NE2K) || defined(CONFIG_NE2K_CBUS_ATLA98)
+static const struct ne2k_cbus_offsetinfo ne2k_offsetinfo __initdata = {
+ 0x01, 0x08, 0x10, 0x1f
+};
+static const struct ne2k_cbus_region ne2k_regionlist[] __initdata = {
+ {0x0,32},
+ {0x0,0}
+};
+#endif
+
+#ifdef CONFIG_NE2K_CBUS_NEC108
+#ifndef MODULE
+static const unsigned short nec108_portlist[] __initdata = {
+ 0x770, 0x2770, 0x4770, 0x6770,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo nec108_offsetinfo __initdata = {
+ 0x02, 0x1000, 0x888, 0x88a
+};
+static const struct ne2k_cbus_region nec108_regionlist[] __initdata = {
+ {0x0,1}, {0x2,1}, {0x4,1}, {0x6,1}, {0x8,1}, {0xa,1}, {0xc,1}, {0xe,1},
+ {0x1000,1}, {0x1002,1}, {0x1004,1}, {0x1006,1},
+ {0x1008,1}, {0x100a,1}, {0x100c,1}, {0x100e,1},
+ {0x118,1}, {0x11a,1}, {0x11c,1}, {0x11e,1},
+ {0x0,0}
+};
+#endif
+
+#ifdef CONFIG_NE2K_CBUS_IOLA98
+#ifndef MODULE
+static const unsigned short iola98_portlist[] __initdata = {
+ 0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc, 0xde,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo iola98_offsetinfo __initdata = {
+ 0x1000, 0x8000, 0x100, 0xf100
+};
+static const struct ne2k_cbus_region iola98_regionlist[] __initdata = {
+ {0x0,1},{0x1000,1},{0x2000,1},{0x3000,1},
+ {0x4000,1},{0x5000,1},{0x6000,1},{0x7000,1},
+ {0x8000,1},{0x9000,1},{0xa000,1},{0xb000,1},
+ {0xc000,1},{0xd000,1},{0xe000,1},{0xf000,1},{0x100,1},{0xf100,1},
+ {0x0,0}
+};
+#endif /* CONFIG_NE2K_CBUS_IOLA98 */
+
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+#ifndef MODULE
+static const unsigned short cnet98el_portlist[] __initdata = {
+ 0x3d0, 0x13d0, 0x23d0, 0x33d0, 0x43d0, 0x53d0, 0x60d0, 0x70d0,
+ 0
+};
+#endif
+static const struct ne2k_cbus_offsetinfo cnet98el_offsetinfo __initdata = {
+ 0x01, 0x08, 0x40e, 0x400
+};
+static const struct ne2k_cbus_region cnet98el_regionlist[] __initdata = {
+ {0x0, 16}, {0x400, 16},
+ {0x0,0}
+};
+#endif
+
+
+/* port information table (for ne.c initialize/probe process) */
+
+static const struct ne2k_cbus_hwinfo ne2k_cbus_hwinfo_list[] __initdata = {
+#ifdef CONFIG_NE2K_CBUS_ATLA98
+/* NOT TESTED */
+ {
+ NE2K_CBUS_HARDWARE_TYPE_ATLA98,
+ "LA-98-T",
+#ifndef MODULE
+ atla98_portlist,
+#endif
+ &atla98_offsetinfo, atla98_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_BDN
+/* NOT TESTED */
+ {
+ NE2K_CBUS_HARDWARE_TYPE_BDN,
+ "LD-BDN[123]A",
+#ifndef MODULE
+ bdn_portlist,
+#endif
+ &bdn_offsetinfo, bdn_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_ICM
+ {
+ NE2K_CBUS_HARDWARE_TYPE_ICM,
+ "IF-27xxET",
+#ifndef MODULE
+ icm_portlist,
+#endif
+ &icm_offsetinfo, icm_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_NE2K
+ {
+ NE2K_CBUS_HARDWARE_TYPE_NE2K,
+ "NE2000 compat.",
+#ifndef MODULE
+ ne2k_portlist,
+#endif
+ &ne2k_offsetinfo, ne2k_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_NEC108
+/* NOT supported yet! */
+ {
+ NE2K_CBUS_HARDWARE_TYPE_NEC108,
+ "PC-9801-108",
+#ifndef MODULE
+ nec108_portlist,
+#endif
+ &nec108_offsetinfo, nec108_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_IOLA98
+ {
+ NE2K_CBUS_HARDWARE_TYPE_IOLA98,
+ "LA-98",
+#ifndef MODULE
+ iola98_portlist,
+#endif
+ &iola98_offsetinfo, iola98_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_CNET98EL
+ {
+ NE2K_CBUS_HARDWARE_TYPE_CNET98EL,
+ "C-NET(98)E/L",
+#ifndef MODULE
+ cnet98el_portlist,
+#endif
+ &cnet98el_offsetinfo, cnet98el_regionlist
+ },
+#endif
+/* NOTE: LGY98 must be probed before EGY98, or system stalled!? */
+#ifdef CONFIG_NE2K_CBUS_LGY98
+ {
+ NE2K_CBUS_HARDWARE_TYPE_LGY98,
+ "LGY-98",
+#ifndef MODULE
+ lgy98_portlist,
+#endif
+ &lgy98_offsetinfo, lgy98_regionlist
+ },
+#endif
+#ifdef CONFIG_NE2K_CBUS_EGY98
+ {
+ NE2K_CBUS_HARDWARE_TYPE_EGY98,
+ "EGY-98",
+#ifndef MODULE
+ egy98_portlist,
+#endif
+ &egy98_offsetinfo, egy98_regionlist
+ },
+#endif
+ {
+ 0,"unsupported hardware",
+#ifndef MODULE
+ NULL,
+#endif
+ NULL,NULL
+ }
+};
+
+static int __init ne2k_cbus_init(struct net_device *dev)
+{
+ struct ei_device *ei_local;
+ if(dev->priv == NULL) {
+ ei_local = kmalloc(sizeof(struct ei_device), GFP_KERNEL);
+ if (ei_local == NULL)
+ return -ENOMEM;
+ memset(ei_local, 0, sizeof(struct ei_device));
+ ei_local->reg_offset = kmalloc(sizeof(typeof(*ei_local->reg_offset))*18, GFP_KERNEL);
+ if (ei_local->reg_offset == NULL){
+ kfree(ei_local);
+ return -ENOMEM;
+ }
+ spin_lock_init(&ei_local->page_lock);
+ dev->priv = ei_local;
+ }
+ return 0;
+}
+
+static void ne2k_cbus_destroy(struct net_device *dev)
+{
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+ if(ei_local != NULL){
+ if(ei_local->reg_offset)
+ kfree(ei_local->reg_offset);
+ kfree(dev->priv);
+ dev->priv=NULL;
+ }
+}
+
+static const struct ne2k_cbus_hwinfo * __init ne2k_cbus_get_hwinfo(int hwtype)
+{
+ const struct ne2k_cbus_hwinfo *hw;
+
+ for(hw=&ne2k_cbus_hwinfo_list[0]; hw->hwtype; hw++){
+ if(hw->hwtype==hwtype) break;
+ }
+ return hw;
+}
+
+static void __init ne2k_cbus_set_hwtype(struct net_device *dev, const struct ne2k_cbus_hwinfo *hw, int ioaddr)
+{
+ struct ei_device *ei_local=(struct ei_device *)(dev->priv);
+ int i;
+ int hwtype_old=(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK);
+
+ if (!ei_local)
+ panic("Gieee! ei_local == NULL!! (from %p)",
+ __builtin_return_address(0));
+
+ dev->mem_start &= (~NE2K_CBUS_HARDWARE_TYPE_MASK);
+ dev->mem_start |= (hw->hwtype & NE2K_CBUS_HARDWARE_TYPE_MASK);
+
+ if(ei_debug>2){
+ printk(KERN_DEBUG "hwtype changed: %d -> %d\n",hwtype_old,(int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
+ }
+
+ if(hw->offsetinfo){
+ for(i=0;i<8;i++){
+ ei_local->reg_offset[i] = hw->offsetinfo->skip * i;
+ }
+ for(i=8;i<16;i++){
+ ei_local->reg_offset[i] =
+ hw->offsetinfo->skip*(i-8) + hw->offsetinfo->offset8;
+ }
+#ifdef CONFIG_NE2K_CBUS_NEC108
+ if(hw->hwtype==NE2K_CBUS_HARDWARE_TYPE_NEC108){
+ int adj = (ioaddr & 0xf000) /2;
+ ei_local->reg_offset[16] =
+ (hw->offsetinfo->offset10 | adj) - ioaddr;
+ ei_local->reg_offset[17] =
+ (hw->offsetinfo->offset1f | adj) - ioaddr;
+ }else{
+#endif /* CONFIG_NE2K_CBUS_NEC108 */
+ ei_local->reg_offset[16] = hw->offsetinfo->offset10;
+ ei_local->reg_offset[17] = hw->offsetinfo->offset1f;
+#ifdef CONFIG_NE2K_CBUS_NEC108
+ }
+#endif
+ }else{
+ /* make dummmy offset list */
+ for(i=0;i<16;i++){
+ ei_local->reg_offset[i] = i;
+ }
+ ei_local->reg_offset[16] = 0x10;
+ ei_local->reg_offset[17] = 0x1f;
+ }
+}
+
+#if defined(CONFIG_NE2K_CBUS_ICM) || defined(CONFIG_NE2K_CBUS_CNET98EL)
+static void __init ne2k_cbus_readmem(struct net_device *dev, int ioaddr, unsigned short memaddr, char *buf, unsigned short len)
+{
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+ outb_p(E8390_NODMA | E8390_START, ioaddr+E8390_CMD);
+ outb_p( len & 0xff, ioaddr+EN0_RCNTLO);
+ outb_p( len >> 8 , ioaddr+EN0_RCNTHI);
+ outb_p( memaddr & 0xff, ioaddr+EN0_RSARLO);
+ outb_p( memaddr >> 8 , ioaddr+EN0_RSARHI);
+ outb_p(E8390_RREAD | E8390_START, ioaddr+E8390_CMD);
+ insw(ioaddr+NE_DATAPORT, buf, len>>1);
+}
+static void __init ne2k_cbus_writemem(struct net_device *dev, int ioaddr, unsigned short memaddr, const char *buf, unsigned short len)
+{
+ struct ei_device *ei_local = (struct ei_device *)(dev->priv);
+ outb_p(E8390_NODMA | E8390_START, ioaddr+E8390_CMD);
+ outb_p( ENISR_RDC, ioaddr+EN0_ISR);
+ outb_p( len & 0xff , ioaddr+EN0_RCNTLO);
+ outb_p( len >> 8 , ioaddr+EN0_RCNTHI);
+ outb_p( memaddr & 0xff , ioaddr+EN0_RSARLO);
+ outb_p( memaddr >> 8 , ioaddr+EN0_RSARHI);
+ outb_p(E8390_RWRITE | E8390_START, ioaddr+E8390_CMD);
+ outsw(ioaddr+NE_DATAPORT, buf, len>>1);
+}
+#endif
+
+/* End of ne2k_cbus.h */
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 7/17] support PC-9800 against 2.5.45-ac1 (FS)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (5 preceding siblings ...)
2002-11-06 18:06 ` [PATCHSET 6/17] support PC-9800 against 2.5.45-ac1 (network device) Osamu Tomita
@ 2002-11-06 18:19 ` Osamu Tomita
2002-11-06 18:22 ` [PATCHSET 8/17] support PC-9800 against 2.5.45-ac1 (IDE) Osamu Tomita
` (9 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:19 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 451 bytes --]
This patch adds support for reading partition table and
VFAT partition made by PC-9800's DOS.
diffstat:
fs/fat/inode.c | 5
fs/partitions/Kconfig | 11 +
fs/partitions/Makefile | 1
fs/partitions/check.c | 4
fs/partitions/msdos.c | 15 ++
fs/partitions/nec98.c | 277 +++++++++++++++++++++++++++++++++++++++++++++++++
fs/partitions/nec98.h | 10 +
7 files changed, 322 insertions(+), 1 deletion(-)
--
Osamu Tomita
[-- Attachment #2: fs.patch --]
[-- Type: text/plain, Size: 12359 bytes --]
diff -urN linux/fs/fat/inode.c linux98/fs/fat/inode.c
--- linux/fs/fat/inode.c Thu Oct 31 13:23:37 2002
+++ linux98/fs/fat/inode.c Thu Oct 31 16:41:16 2002
@@ -49,6 +49,7 @@
#define FAT_HASH_MASK (FAT_HASH_SIZE-1)
static struct list_head fat_inode_hashtable[FAT_HASH_SIZE];
spinlock_t fat_inode_lock = SPIN_LOCK_UNLOCKED;
+extern int pc98; /* whether PC-9801 architecutre or not */
void fat_hash_init(void)
{
@@ -928,7 +929,9 @@
error = first;
goto out_fail;
}
- if (FAT_FIRST_ENT(sb, media) != first) {
+ if (FAT_FIRST_ENT(sb, media) != first
+ && (!pc98 || media != 0xf8 || (first & 0xff) != 0xfe))
+ {
if (!silent) {
printk(KERN_ERR "FAT: invalid first entry of FAT "
"(0x%x != 0x%x)\n",
diff -urN linux/fs/partitions/Kconfig linux98/fs/partitions/Kconfig
--- linux/fs/partitions/Kconfig Thu Oct 31 13:23:38 2002
+++ linux98/fs/partitions/Kconfig Thu Oct 31 16:27:06 2002
@@ -177,6 +177,17 @@
If unsure, say N.
+config NEC98_PARTITION
+ bool "NEC PC-9800 partition table support" if PARTITION_ADVANCED
+ default y if !PARTITION_ADVANCED && PC9800
+ help
+ Say Y here if you would like to be able to read the hard disk
+ partition table format used by NEC PC-9800 machines.
+
+config NEC98_BSD_DISKLABEL
+ bool "BSD disklabel support for NEC PC-9800 type partitions"
+ depends on NEC98_PARTITION
+
config SGI_PARTITION
bool "SGI partition support" if PARTITION_ADVANCED
default y if !PARTITION_ADVANCED && (SGI_IP22 || SGI_IP27)
diff -urN linux/fs/partitions/Makefile linux98/fs/partitions/Makefile
--- linux/fs/partitions/Makefile Sat Oct 19 13:01:50 2002
+++ linux98/fs/partitions/Makefile Sat Oct 19 17:00:39 2002
@@ -18,6 +18,7 @@
obj-$(CONFIG_ULTRIX_PARTITION) += ultrix.o
obj-$(CONFIG_IBM_PARTITION) += ibm.o
obj-$(CONFIG_EFI_PARTITION) += efi.o
+obj-$(CONFIG_NEC98_PARTITION) += nec98.o msdos.o
include $(TOPDIR)/Rules.make
diff -urN linux/fs/partitions/check.c linux98/fs/partitions/check.c
--- linux/fs/partitions/check.c Thu Oct 31 13:23:38 2002
+++ linux98/fs/partitions/check.c Thu Oct 31 16:16:41 2002
@@ -29,6 +29,7 @@
#include "ldm.h"
#include "mac.h"
#include "msdos.h"
+#include "nec98.h"
#include "osf.h"
#include "sgi.h"
#include "sun.h"
@@ -52,6 +53,9 @@
#ifdef CONFIG_LDM_PARTITION
ldm_partition, /* this must come before msdos */
#endif
+#ifdef CONFIG_NEC98_PARTITION
+ nec98_partition, /* must be come before `msdos_partition' */
+#endif
#ifdef CONFIG_MSDOS_PARTITION
msdos_partition,
#endif
diff -urN linux/fs/partitions/msdos.c linux98/fs/partitions/msdos.c
--- linux/fs/partitions/msdos.c Sat Oct 12 13:22:10 2002
+++ linux98/fs/partitions/msdos.c Sun Oct 13 22:23:58 2002
@@ -20,6 +20,11 @@
*/
#include <linux/config.h>
+
+#ifdef CONFIG_NEC98_BSD_DISKLABEL
+# define CONFIG_BSD_DISKLABEL
+#endif
+
#include <linux/buffer_head.h> /* for invalidate_bdev() */
#ifdef CONFIG_BLK_DEV_IDE
@@ -37,6 +42,7 @@
#include "msdos.h"
#include "efi.h"
+#if !defined(CONFIG_PC9800) || defined(CONFIG_MSDOS_PARTITION)
/*
* Many architectures don't like unaligned accesses, which is
* frequently the case with the nr_sects and start_sect partition
@@ -171,6 +177,7 @@
done:
put_dev_sector(sect);
}
+#endif /* !defined(CONFIG_PC9800) || defined(CONFIG_MSDOS_PARTITION) */
/* james@bpgc.com: Solaris has a nasty indicator: 0x82 which also
indicates linux swap. Be careful before believing this is Solaris. */
@@ -179,6 +186,7 @@
parse_solaris_x86(struct parsed_partitions *state, struct block_device *bdev,
u32 offset, u32 size, int origin)
{
+#if !defined(CONFIG_PC9800) || defined(CONFIG_MSDOS_PARTITION)
#ifdef CONFIG_SOLARIS_X86_PARTITION
Sector sect;
struct solaris_x86_vtoc *v;
@@ -212,6 +220,7 @@
put_dev_sector(sect);
printk(" >\n");
#endif
+#endif /* !defined(CONFIG_PC9800) || defined(CONFIG_MSDOS_PARTITION) */
}
#ifdef CONFIG_BSD_DISKLABEL
@@ -219,7 +228,11 @@
* Create devices for BSD partitions listed in a disklabel, under a
* dos-like partition. See parse_extended() for more information.
*/
+#ifndef CONFIG_NEC98_BSD_DISKLABEL
static void
+#else
+void
+#endif
parse_bsd(struct parsed_partitions *state, struct block_device *bdev,
u32 offset, u32 size, int origin, char *flavour,
int max_partitions)
@@ -292,6 +305,7 @@
#endif
}
+#if !defined(CONFIG_PC9800) || defined(CONFIG_MSDOS_PARTITION)
/*
* Create devices for Unixware partitions listed in a disklabel, under a
* dos-like partition. See parse_extended() for more information.
@@ -461,3 +475,4 @@
put_dev_sector(sect);
return 1;
}
+#endif /* !defined(CONFIG_PC9800) || defined(CONFIG_MSDOS_PARTITION) */
diff -urN linux/fs/partitions/nec98.c linux98/fs/partitions/nec98.c
--- linux/fs/partitions/nec98.c Thu Jan 1 09:00:00 1970
+++ linux98/fs/partitions/nec98.c Sat Nov 2 17:12:51 2002
@@ -0,0 +1,277 @@
+/*
+ * NEC PC-9800 series partition supports
+ *
+ * Copyright (C) 1999 Kyoto University Microcomputer Club
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_NEC98_BSD_DISKLABEL
+#define CONFIG_BSD_DISKLABEL
+#endif
+
+#include <linux/fs.h>
+#include <linux/genhd.h>
+#include <linux/kernel.h>
+#include <linux/blk.h>
+#include <linux/major.h>
+
+#include "check.h"
+#include "nec98.h"
+
+/* #ifdef CONFIG_BLK_DEV_IDEDISK */
+#include <linux/ide.h>
+/* #endif */
+
+/* #ifdef CONFIG_BLK_DEV_SD */
+#include "../../drivers/scsi/scsi.h"
+#include "../../drivers/scsi/hosts.h"
+#include <scsi/scsicam.h>
+/* #endif */
+
+struct nec98_partition {
+ __u8 mid; /* 0x80 - active */
+ __u8 sid; /* 0x80 - bootable */
+ __u16 pad1; /* dummy for padding */
+ __u8 ipl_sector; /* IPL sector */
+ __u8 ipl_head; /* IPL head */
+ __u16 ipl_cyl; /* IPL cylinder */
+ __u8 sector; /* starting sector */
+ __u8 head; /* starting head */
+ __u16 cyl; /* starting cylinder */
+ __u8 end_sector; /* end sector */
+ __u8 end_head; /* end head */
+ __u16 end_cyl; /* end cylinder */
+ unsigned char name[16];
+} __attribute__((__packed__));
+
+#define NEC98_BSD_PARTITION_MID 0x14
+#define NEC98_BSD_PARTITION_SID 0x44
+#define MID_SID_16(mid, sid) (((mid) & 0xFF) | (((sid) & 0xFF) << 8))
+#define NEC98_BSD_PARTITION_MID_SID \
+ MID_SID_16(NEC98_BSD_PARTITION_MID, NEC98_BSD_PARTITION_SID)
+#define NEC98_VALID_PTABLE_ENTRY(P) \
+ (!(P)->pad1 && (P)->cyl <= (P)->end_cyl)
+
+static inline int
+is_valid_nec98_partition_table(const struct nec98_partition *ptable,
+ __u8 nsectors, __u8 nheads)
+{
+ int i;
+ int valid = 0;
+
+ for (i = 0; i < 16; i++) {
+ if (!*(__u16 *)&ptable[i])
+ continue; /* empty slot */
+ if (ptable[i].pad1 /* `pad1' contains junk */
+ || ptable[i].ipl_sector >= nsectors
+ || ptable[i].sector >= nsectors
+ || ptable[i].end_sector >= nsectors
+ || ptable[i].ipl_head >= nheads
+ || ptable[i].head >= nheads
+ || ptable[i].end_head >= nheads
+ || ptable[i].cyl > ptable[i].end_cyl)
+ return 0;
+ valid = 1; /* We have a valid partition. */
+ }
+ /* If no valid PC-9800-style partitions found,
+ the disk may have other type of partition table. */
+ return valid;
+}
+
+#ifdef CONFIG_NEC98_BSD_DISKLABEL
+extern void parse_bsd(struct parsed_partitions *state,
+ struct block_device *bdev,
+ u32 offset, u32 size, int origin, char *flavour,
+ int max_partitions);
+#endif
+
+extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *);
+
+int nec98_partition(struct parsed_partitions *state, struct block_device *bdev)
+{
+ unsigned int nr;
+ int g_head, g_sect;
+ Sector sect;
+ const struct nec98_partition *part;
+ unsigned char *data;
+ int sector_size = bdev_hardsect_size(bdev);
+ int major = major(to_kdev_t(bdev->bd_dev));
+ int minor = minor(to_kdev_t(bdev->bd_dev));
+
+ switch (major) {
+#if defined CONFIG_BLK_DEV_HD_ONLY
+ case HD_MAJOR:
+ {
+ extern struct hd_i_struct hd_info[2];
+
+ g_head = hd_info[minor >> 6].head;
+ g_sect = hd_info[minor >> 6].sect;
+ break;
+ }
+#endif /* CONFIG_BLK_DEV_HD_ONLY */
+#if defined CONFIG_BLK_DEV_SD || defined CONFIG_BLK_DEV_SD_MODULE
+ case SCSI_DISK0_MAJOR:
+ case SCSI_DISK1_MAJOR:
+ case SCSI_DISK2_MAJOR:
+ case SCSI_DISK3_MAJOR:
+ case SCSI_DISK4_MAJOR:
+ case SCSI_DISK5_MAJOR:
+ case SCSI_DISK6_MAJOR:
+ case SCSI_DISK7_MAJOR:
+ {
+ int diskinfo[3] = { 0, 0, 0 };
+ sector_t capacity;
+
+ (void)sd_find_params_by_bdev(bdev, NULL, &capacity);
+ scsicam_bios_param(bdev, capacity, diskinfo);
+
+ if ((g_head = diskinfo[0]) <= 0)
+ g_head = 8;
+ if ((g_sect = diskinfo[1]) <= 0)
+ g_sect = 17;
+ break;
+ }
+#endif /* CONFIG_BLK_DEV_SD(_MODULE) */
+#if defined CONFIG_BLK_DEV_IDEDISK || defined CONFIG_BLK_DEV_IDEDISK_MODULE
+ case IDE0_MAJOR:
+ case IDE1_MAJOR:
+ case IDE2_MAJOR:
+ case IDE3_MAJOR:
+ case IDE4_MAJOR:
+ case IDE5_MAJOR:
+ case IDE6_MAJOR:
+ case IDE7_MAJOR:
+ case IDE8_MAJOR:
+ case IDE9_MAJOR:
+ {
+ ide_drive_t *drive;
+ unsigned int h;
+
+ for (h = 0; h < MAX_HWIFS; ++h) {
+ ide_hwif_t *hwif = &ide_hwifs[h];
+ if (hwif->present && major == hwif->major) {
+ unsigned unit = minor >> PARTN_BITS;
+ if (unit < MAX_DRIVES) {
+ drive = &hwif->drives[unit];
+ if (drive->present) {
+ g_head = drive->head;
+ g_sect = drive->sect;
+ goto found;
+ }
+ }
+ break;
+ }
+ }
+ }
+#endif /* CONFIG_BLK_DEV_IDEDISK(_MODULE) */
+ default:
+ printk(" unsupported disk (major = %u)\n", major);
+ return 0;
+ }
+
+ found:
+ data = read_dev_sector(bdev, 0, §);
+ if (!data) {
+ if (warn_no_part)
+ printk(" unable to read partition table\n");
+ return -1;
+ }
+
+ /* magic(?) check */
+ if (*(__u16 *)(data + sector_size - 2) != NEC98_PTABLE_MAGIC) {
+ put_dev_sector(sect);
+ return 0;
+ }
+
+ put_dev_sector(sect);
+ data = read_dev_sector(bdev, 1, §);
+ if (!data) {
+ if (warn_no_part)
+ printk(" unable to read partition table\n");
+ return -1;
+ }
+
+ if (!is_valid_nec98_partition_table((struct nec98_partition *)data,
+ g_sect, g_head)) {
+#if 0
+ if (warn_no_part)
+ printk(" partition table consistency check failed"
+ " (not PC-9800 disk?)\n");
+#endif
+ put_dev_sector(sect);
+ return 0;
+ }
+
+ part = (const struct nec98_partition *)data;
+ for (nr = 0; nr < 16; nr++, part++) {
+ unsigned int start_sect, end_sect;
+
+ if (part->mid == 0 || part->sid == 0)
+ continue;
+
+ if (nr)
+ printk(" ");
+
+ { /* Print partition name. Fdisk98 might put NUL
+ characters in partition name... */
+
+ int j;
+ unsigned char *p;
+ unsigned char buf[sizeof (part->name) * 2 + 1];
+
+ for (p = buf, j = 0; j < sizeof (part->name); j++, p++)
+ if ((*p = part->name[j]) < ' ') {
+ *p++ = '^';
+ *p = part->name[j] + '@';
+ }
+
+ *p = 0;
+ printk(" <%s>", buf);
+ }
+ start_sect = (part->cyl * g_head + part->head) * g_sect
+ + part->sector;
+ end_sect = (part->end_cyl + 1) * g_head * g_sect;
+ if (end_sect <= start_sect) {
+ printk(" (invalid partition info)\n");
+ continue;
+ }
+
+ put_partition(state, nr + 1, start_sect, end_sect - start_sect);
+#ifdef CONFIG_NEC98_BSD_DISKLABEL
+ if ((*(__u16 *)&part->mid & 0x7F7F)
+ == NEC98_BSD_PARTITION_MID_SID) {
+ printk("!");
+ /* NEC98_BSD_PARTITION_MID_SID is not valid SYSIND for
+ IBM PC's MS-DOS partition table, so we simply pass
+ it to bsd_disklabel_partition;
+ it will just print `<bsd: ... >'. */
+ parse_bsd(state, bdev, start_sect,
+ end_sect - start_sect, nr + 1,
+ "bsd98", BSD_MAXPARTITIONS);
+ }
+#endif
+ { /* Pretty size printing. */
+ /* XXX sector size? */
+ unsigned int psize = (end_sect - start_sect) / 2;
+ int unit_char = 'K';
+
+ if (psize > 99999) {
+ psize >>= 10;
+ unit_char = 'M';
+ }
+ printk(" %5d%cB (%5d-%5d)\n",
+ psize, unit_char, part->cyl, part->end_cyl);
+ }
+ }
+
+ put_dev_sector(sect);
+
+ return nr ? 1 : 0;
+}
+\f
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff -urN linux/fs/partitions/nec98.h linux98/fs/partitions/nec98.h
--- linux/fs/partitions/nec98.h Thu Jan 1 09:00:00 1970
+++ linux98/fs/partitions/nec98.h Fri Jul 26 11:10:08 2002
@@ -0,0 +1,10 @@
+/*
+ * NEC PC-9800 series partition supports
+ *
+ * Copyright (C) 1998-2000 Kyoto University Microcomputer Club
+ */
+
+#define NEC98_PTABLE_MAGIC 0xAA55
+
+extern int nec98_partition(struct parsed_partitions *state,
+ struct block_device *bdev);
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 8/17] support PC-9800 against 2.5.45-ac1 (IDE)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (6 preceding siblings ...)
2002-11-06 18:19 ` [PATCHSET 7/17] support PC-9800 against 2.5.45-ac1 (FS) Osamu Tomita
@ 2002-11-06 18:22 ` Osamu Tomita
2002-11-06 18:26 ` [PATCHSET 9/17] support PC-9800 against 2.5.45-ac1 (core#2) Osamu Tomita
` (8 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:22 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 643 bytes --]
This patch adds IDE Hard disk and IDE CD-ROM support for PC-9800.
diffstat:
drivers/ide/Kconfig | 5
drivers/ide/ide-disk.c | 67 +++
drivers/ide/ide-geometry.c | 2
drivers/ide/ide-probe.c | 23 -
drivers/ide/ide-proc.c | 3
drivers/ide/ide.c | 14
drivers/ide/legacy/Makefile | 5
drivers/ide/legacy/hd98.c | 904 ++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/legacy/pc9800.c | 82 +++
include/asm-i386/ide.h | 18
include/linux/hdreg.h | 19
include/linux/ide.h | 2
12 files changed, 1138 insertions(+), 6 deletions(-)
--
Osamu Tomita
[-- Attachment #2: ide.patch --]
[-- Type: text/plain, Size: 37470 bytes --]
diff -urN linux/drivers/ide/Kconfig linux98/drivers/ide/Kconfig
--- linux/drivers/ide/Kconfig Thu Oct 31 13:23:12 2002
+++ linux98/drivers/ide/Kconfig Sat Nov 2 18:23:53 2002
@@ -998,6 +998,11 @@
If unsure, say N.
+config BLK_DEV_IDE_PC9800
+ bool
+ depends on PC9800
+ default y
+
##if [ "$CONFIG_IDE_TASKFILE_IO" = "y" ]; then
## dep_mbool CONFIG_BLK_DEV_TF_DISK $CONFIG_BLK_DEV_IDEDISK
##else
diff -urN linux/drivers/ide/ide-disk.c linux98/drivers/ide/ide-disk.c
--- linux/drivers/ide/ide-disk.c Thu Oct 31 13:23:12 2002
+++ linux98/drivers/ide/ide-disk.c Thu Oct 31 16:45:25 2002
@@ -1596,6 +1596,71 @@
blk_queue_max_sectors(&drive->queue, 2048);
#endif
+#ifdef CONFIG_PC9800
+ /* XXX - need more checks */
+ if (!drive->nobios && !drive->scsi && !drive->removable) {
+ /* PC-9800's BIOS do pack drive numbers to be continuous,
+ so extra work is needed here. */
+
+ /* drive information passed from boot/setup.S */
+ struct drive_info_struct {
+ u16 cyl;
+ u8 sect, head;
+ u16 ssize;
+ } __attribute__ ((packed));
+ extern struct drive_info_struct drive_info[];
+
+ /* this pointer must be advanced only when *DRIVE is
+ really hard disk. */
+ static struct drive_info_struct *info = drive_info;
+
+ if (info < &drive_info[4] && info->cyl) {
+ drive->cyl = drive->bios_cyl = info->cyl;
+ drive->head = drive->bios_head = info->head;
+ drive->sect = drive->bios_sect = info->sect;
+ ++info;
+ }
+ }
+
+ /* =PC98 MEMO=
+ physical capacity =< 65535*8*17 sect. : H/S=8/17 (fixed)
+ physical capacity > 65535*8*17 sect. : use physical geometry
+ (65535*8*17 = 8912760 sectors)
+ */
+ printk("%s: CHS: physical %d/%d/%d, logical %d/%d/%d, BIOS %d/%d/%d\n",
+ drive->name,
+ id->cyls, id->heads, id->sectors,
+ id->cur_cyls, id->cur_heads, id->cur_sectors,
+ drive->bios_cyl, drive->bios_head,drive->bios_sect);
+ if (!drive->cyl || !drive->head || !drive->sect) {
+ drive->cyl = drive->bios_cyl = id->cyls;
+ drive->head = drive->bios_head = id->heads;
+ drive->sect = drive->bios_sect = id->sectors;
+ printk("%s: not BIOS-supported device.\n",drive->name);
+ }
+ /* calculate drive capacity, and select LBA if possible */
+ init_idedisk_capacity(drive);
+
+ /*
+ * if possible, give fdisk access to more of the drive,
+ * by correcting bios_cyls:
+ */
+ capacity = idedisk_capacity(drive);
+ if (capacity < 8912760 &&
+ (drive->head != 8 || drive->sect != 17)) {
+ drive->head = drive->bios_head = 8;
+ drive->sect = drive->bios_sect = 17;
+ drive->cyl = drive->bios_cyl =
+ capacity / (drive->bios_head * drive->bios_sect);
+ printk("%s: Fixing Geometry :: CHS=%d/%d/%d to CHS=%d/%d/%d\n",
+ drive->name,
+ id->cur_cyls,id->cur_heads,id->cur_sectors,
+ drive->bios_cyl,drive->bios_head,drive->bios_sect);
+ id->cur_cyls = drive->bios_cyl;
+ id->cur_heads = drive->bios_head;
+ id->cur_sectors = drive->bios_sect;
+ }
+#else /* !CONFIG_PC9800 */
/* Extract geometry if we did not already have one for the drive */
if (!drive->cyl || !drive->head || !drive->sect) {
drive->cyl = drive->bios_cyl = id->cyls;
@@ -1629,6 +1694,8 @@
if ((capacity >= (drive->bios_cyl * drive->bios_sect * drive->bios_head)) &&
(!drive->forced_geom) && drive->bios_sect && drive->bios_head)
drive->bios_cyl = (capacity / drive->bios_sect) / drive->bios_head;
+#endif /* CONFIG_PC9800 */
+
printk (KERN_INFO "%s: %ld sectors", drive->name, capacity);
/* Give size in megabytes (MB), not mebibytes (MiB). */
diff -urN linux/drivers/ide/ide-geometry.c linux98/drivers/ide/ide-geometry.c
--- linux/drivers/ide/ide-geometry.c Sat Oct 19 13:02:28 2002
+++ linux98/drivers/ide/ide-geometry.c Sat Oct 19 15:08:56 2002
@@ -6,6 +6,7 @@
#include <linux/mc146818rtc.h>
#include <asm/io.h>
+#ifndef CONFIG_PC9800
/*
* We query CMOS about hard disks : it could be that we have a SCSI/ESDI/etc
* controller that is BIOS compatible with ST-506, and thus showing up in our
@@ -81,6 +82,7 @@
}
#endif
}
+#endif /* !CONFIG_PC9800 */
extern unsigned long current_capacity (ide_drive_t *);
diff -urN linux/drivers/ide/ide-probe.c linux98/drivers/ide/ide-probe.c
--- linux/drivers/ide/ide-probe.c Thu Oct 31 13:23:12 2002
+++ linux98/drivers/ide/ide-probe.c Thu Oct 31 16:45:25 2002
@@ -55,6 +55,11 @@
#include <asm/io.h>
/*
+ * Whether PC-9800 architecture or not.
+ */
+extern int pc98;
+
+/*
* CompactFlash cards and their brethern pretend to be removable
* hard disks, except:
* (1) they never have a slave unit, and
@@ -554,7 +559,7 @@
if (hwif->mmio == 2)
return 0;
- addr_errs = hwif_check_region(hwif->io_ports[IDE_DATA_OFFSET], 1);
+ addr_errs = hwif_check_region(hwif->io_ports[IDE_DATA_OFFSET], pc98 ? 2 : 1);
for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET; i++)
addr_errs += hwif_check_region(hwif->io_ports[i], 1);
if (hwif->io_ports[IDE_CONTROL_OFFSET])
@@ -603,7 +608,9 @@
}
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hwif_request_region(hwif->io_ports[i], 1, hwif->name);
+ hwif_request_region(hwif->io_ports[i],
+ (pc98 && i == IDE_DATA_OFFSET) ? 2 : 1,
+ hwif->name);
}
//EXPORT_SYMBOL(hwif_register);
@@ -620,7 +627,7 @@
if (hwif->noprobe)
return;
-#ifdef CONFIG_BLK_DEV_IDE
+#if !defined(CONFIG_PC9800) && defined(CONFIG_BLK_DEV_IDE)
if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA) {
extern void probe_cmos_for_drives(ide_hwif_t *);
probe_cmos_for_drives(hwif);
@@ -631,6 +638,9 @@
#if CONFIG_BLK_DEV_PDC4030
(hwif->chipset != ide_pdc4030 || hwif->channel == 0) &&
#endif /* CONFIG_BLK_DEV_PDC4030 */
+#if CONFIG_BLK_DEV_IDE_PC9800
+ (hwif->chipset != ide_pc9800 || !hwif->mate->present) &&
+#endif
(hwif_check_regions(hwif))) {
u16 msgout = 0;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
@@ -950,7 +960,7 @@
/* all CPUs; safe now that hwif->hwgroup is set up */
spin_unlock_irqrestore(&ide_lock, flags);
-#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
+#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__) && !defined(CONFIG_PC9800)
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
@@ -960,6 +970,11 @@
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
hwif->io_ports[IDE_CONTROL_OFFSET], __irq_itoa(hwif->irq));
+#elif defined(CONFIG_PC9800)
+ printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
+ hwif->io_ports[IDE_DATA_OFFSET],
+ hwif->io_ports[IDE_DATA_OFFSET]+15,
+ hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq);
#else
printk("%s at %x on irq 0x%08x", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
diff -urN linux/drivers/ide/ide-proc.c linux98/drivers/ide/ide-proc.c
--- linux/drivers/ide/ide-proc.c Mon Sep 16 11:18:30 2002
+++ linux98/drivers/ide/ide-proc.c Mon Sep 16 13:53:42 2002
@@ -365,6 +365,9 @@
case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
+#ifdef CONFIG_PC9800
+ case ide_pc9800: name = "pc9800"; break;
+#endif
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
diff -urN linux/drivers/ide/ide.c linux98/drivers/ide/ide.c
--- linux/drivers/ide/ide.c Thu Oct 31 13:23:13 2002
+++ linux98/drivers/ide/ide.c Thu Oct 31 16:45:25 2002
@@ -189,6 +189,11 @@
static int ide_intr_lock;
#endif /* __mc68000__ || CONFIG_APUS */
+/*
+ * Whether PC-9800 architecture or not.
+ */
+extern int pc98;
+
#ifdef CONFIG_IDEDMA_AUTO
int noautodma = 0;
#else
@@ -1657,7 +1662,8 @@
}
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
if (hwif->io_ports[i]) {
- hwif_release_region(hwif->io_ports[i], 1);
+ hwif_release_region(hwif->io_ports[i],
+ (pc98 && i == IDE_DATA_OFFSET) ? 2 : 1);
}
}
}
@@ -3009,6 +3015,12 @@
}
#endif /* CONFIG_BLK_DEV_IDEPCI */
+#ifdef CONFIG_BLK_DEV_IDE_PC9800
+ {
+ extern void ide_probe_for_pc9800(void);
+ ide_probe_for_pc9800();
+ }
+#endif
#ifdef CONFIG_ETRAX_IDE
{
extern void init_e100_ide(void);
diff -urN linux/drivers/ide/legacy/Makefile linux98/drivers/ide/legacy/Makefile
--- linux/drivers/ide/legacy/Makefile Sat Oct 12 13:21:34 2002
+++ linux98/drivers/ide/legacy/Makefile Sun Oct 13 11:07:36 2002
@@ -2,6 +2,7 @@
obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o
obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o
obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
+obj-$(CONFIG_BLK_DEV_IDE_PC9800) += pc9800.o
obj-$(CONFIG_BLK_DEV_PDC4030) += pdc4030.o
obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o
obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
@@ -15,7 +16,11 @@
obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
# Last of all
+ifneq ($(CONFIG_PC9800),y)
obj-$(CONFIG_BLK_DEV_HD) += hd.o
+else
+obj-$(CONFIG_BLK_DEV_HD) += hd98.o
+endif
EXTRA_CFLAGS := -Idrivers/ide
diff -urN linux/drivers/ide/legacy/hd98.c linux98/drivers/ide/legacy/hd98.c
--- linux/drivers/ide/legacy/hd98.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/ide/legacy/hd98.c Sat Oct 26 15:42:09 2002
@@ -0,0 +1,904 @@
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * This is the low-level hd interrupt support. It traverses the
+ * request-list, using interrupts to jump between functions. As
+ * all the functions are called within interrupts, we may not
+ * sleep. Special care is recommended.
+ *
+ * modified by Drew Eckhardt to check nr of hd's from the CMOS.
+ *
+ * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
+ * in the early extended-partition checks and added DM partitions
+ *
+ * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
+ * and general streamlining by Mark Lord.
+ *
+ * Removed 99% of above. Use Mark's ide driver for those options.
+ * This is now a lightweight ST-506 driver. (Paul Gortmaker)
+ *
+ * Modified 1995 Russell King for ARM processor.
+ *
+ * Bugfix: max_sectors must be <= 255 or the wheels tend to come
+ * off in a hurry once you queue things up - Paul G. 02/2001
+ */
+
+/* Uncomment the following if you want verbose error reports. */
+/* #define VERBOSE_ERRORS */
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/mc146818rtc.h> /* CMOS defines */
+#include <linux/init.h>
+#include <linux/blkpg.h>
+#include <linux/hdreg.h>
+
+#define REALLY_SLOW_IO
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MAJOR_NR HD_MAJOR
+#define DEVICE_NR(device) (minor(device)>>6)
+#include <linux/blk.h>
+
+#include "io_ports.h"
+
+#ifdef __arm__
+#undef HD_IRQ
+#endif
+#include <asm/irq.h>
+#ifdef __arm__
+#define HD_IRQ IRQ_HARDDISK
+#endif
+
+/* Hd controller regster ports */
+
+#define HD_DATA 0x640 /* _CTL when writing */
+#define HD_ERROR 0x642 /* see err-bits */
+#define HD_NSECTOR 0x644 /* nr of sectors to read/write */
+#define HD_SECTOR 0x646 /* starting sector */
+#define HD_LCYL 0x648 /* starting cylinder */
+#define HD_HCYL 0x64a /* high byte of starting cyl */
+#define HD_CURRENT 0x64c /* 101dhhhh , d=drive, hhhh=head */
+#define HD_STATUS 0x64e /* see status-bits */
+#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
+#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
+#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
+
+#define HD_CMD 0x74c /* used for resets */
+#define HD_ALTSTATUS 0x74c /* same as HD_STATUS but doesn't clear irq */
+
+/* Bits of HD_STATUS */
+#define ERR_STAT 0x01
+#define INDEX_STAT 0x02
+#define ECC_STAT 0x04 /* Corrected error */
+#define DRQ_STAT 0x08
+#define SEEK_STAT 0x10
+#define SERVICE_STAT SEEK_STAT
+#define WRERR_STAT 0x20
+#define READY_STAT 0x40
+#define BUSY_STAT 0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR 0x01 /* Bad address mark */
+#define TRK0_ERR 0x02 /* couldn't find track 0 */
+#define ABRT_ERR 0x04 /* Command aborted */
+#define MCR_ERR 0x08 /* media change request */
+#define ID_ERR 0x10 /* ID field not found */
+#define MC_ERR 0x20 /* media changed */
+#define ECC_ERR 0x40 /* Uncorrectable ECC error */
+#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
+#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
+
+static spinlock_t hd_lock = SPIN_LOCK_UNLOCKED;
+
+#define TIMEOUT_VALUE (6*HZ)
+#define HD_DELAY 0
+
+#define MAX_ERRORS 16 /* Max read/write errors/sector */
+#define RESET_FREQ 8 /* Reset controller every 8th retry */
+#define RECAL_FREQ 4 /* Recalibrate every 4th retry */
+#define MAX_HD 2
+
+#define STAT_OK (READY_STAT|SEEK_STAT)
+#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK)
+
+static void recal_intr(void);
+static void bad_rw_intr(void);
+
+static char recalibrate[MAX_HD];
+static char special_op[MAX_HD];
+
+static int reset;
+static int hd_error;
+
+#define SUBSECTOR(block) (CURRENT->current_nr_sectors > 0)
+
+/*
+ * This struct defines the HD's and their types.
+ */
+struct hd_i_struct {
+ unsigned int head,sect,cyl,wpcom,lzone,ctl;
+};
+
+#ifdef HD_TYPE
+struct hd_i_struct hd_info[] = { HD_TYPE };
+static int NR_HD = ((sizeof (hd_info))/(sizeof (struct hd_i_struct)));
+#else
+struct hd_i_struct hd_info[MAX_HD];
+static int NR_HD;
+#endif
+
+static struct gendisk *hd_gendisk[MAX_HD];
+
+static struct timer_list device_timer;
+
+#define TIMEOUT_VALUE (6*HZ)
+
+#define SET_TIMER \
+ do { \
+ mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \
+ } while (0)
+
+static void (*do_hd)(void) = NULL;
+#define SET_HANDLER(x) \
+if ((do_hd = (x)) != NULL) \
+ SET_TIMER; \
+else \
+ del_timer(&device_timer);
+
+
+#if (HD_DELAY > 0)
+unsigned long last_req;
+
+unsigned long read_timer(void)
+{
+ extern spinlock_t i8253_lock;
+ unsigned long t, flags;
+ int i;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ t = jiffies * 11932;
+ outb_p(0, PIT_MODE);
+ i = inb_p(PIT_CH0);
+ i |= inb(PIT_CH0) << 8;
+ spin_unlock_irqrestore(&i8253_lock, flags);
+ return(t - i);
+}
+#endif
+
+void __init hd_setup(char *str, int *ints)
+{
+ int hdind = 0;
+
+ if (ints[0] != 3)
+ return;
+ if (hd_info[0].head != 0)
+ hdind=1;
+ hd_info[hdind].head = ints[2];
+ hd_info[hdind].sect = ints[3];
+ hd_info[hdind].cyl = ints[1];
+ hd_info[hdind].wpcom = 0;
+ hd_info[hdind].lzone = ints[1];
+ hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
+ NR_HD = hdind+1;
+}
+
+static void dump_status (const char *msg, unsigned int stat)
+{
+ char devc;
+
+ devc = !blk_queue_empty(QUEUE) ? 'a' + DEVICE_NR(CURRENT->rq_dev) : '?';
+#ifdef VERBOSE_ERRORS
+ printk("hd%c: %s: status=0x%02x { ", devc, msg, stat & 0xff);
+ if (stat & BUSY_STAT) printk("Busy ");
+ if (stat & READY_STAT) printk("DriveReady ");
+ if (stat & WRERR_STAT) printk("WriteFault ");
+ if (stat & SEEK_STAT) printk("SeekComplete ");
+ if (stat & DRQ_STAT) printk("DataRequest ");
+ if (stat & ECC_STAT) printk("CorrectedError ");
+ if (stat & INDEX_STAT) printk("Index ");
+ if (stat & ERR_STAT) printk("Error ");
+ printk("}\n");
+ if ((stat & ERR_STAT) == 0) {
+ hd_error = 0;
+ } else {
+ hd_error = inb(HD_ERROR);
+ printk("hd%c: %s: error=0x%02x { ", devc, msg, hd_error & 0xff);
+ if (hd_error & BBD_ERR) printk("BadSector ");
+ if (hd_error & ECC_ERR) printk("UncorrectableError ");
+ if (hd_error & ID_ERR) printk("SectorIdNotFound ");
+ if (hd_error & ABRT_ERR) printk("DriveStatusError ");
+ if (hd_error & TRK0_ERR) printk("TrackZeroNotFound ");
+ if (hd_error & MARK_ERR) printk("AddrMarkNotFound ");
+ printk("}");
+ if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) {
+ printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
+ inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
+ if (!blk_queue_empty(QUEUE))
+ printk(", sector=%ld", CURRENT->sector);
+ }
+ printk("\n");
+ }
+#else
+ printk("hd%c: %s: status=0x%02x.\n", devc, msg, stat & 0xff);
+ if ((stat & ERR_STAT) == 0) {
+ hd_error = 0;
+ } else {
+ hd_error = inb(HD_ERROR);
+ printk("hd%c: %s: error=0x%02x.\n", devc, msg, hd_error & 0xff);
+ }
+#endif
+}
+
+void check_status(void)
+{
+ int i = inb(HD_STATUS);
+
+ if (!OK_STATUS(i)) {
+ dump_status("check_status", i);
+ bad_rw_intr();
+ }
+}
+
+static int controller_busy(void)
+{
+ int retries = 100000;
+ unsigned char status;
+
+ do {
+ status = inb(HD_STATUS);
+ } while ((status & BUSY_STAT) && --retries);
+ return status;
+}
+
+static int status_ok(void)
+{
+ unsigned char status = inb(HD_STATUS);
+
+ if (status & BUSY_STAT)
+ return 1; /* Ancient, but does it make sense??? */
+ if (status & WRERR_STAT)
+ return 0;
+ if (!(status & READY_STAT))
+ return 0;
+ if (!(status & SEEK_STAT))
+ return 0;
+ return 1;
+}
+
+static int controller_ready(unsigned int drive, unsigned int head)
+{
+ int retry = 100;
+
+ do {
+ if (controller_busy() & BUSY_STAT)
+ return 0;
+ outb(0xA0 | (drive<<4) | head, HD_CURRENT);
+ if (status_ok())
+ return 1;
+ } while (--retry);
+ return 0;
+}
+
+static void hd_out(unsigned int drive,unsigned int nsect,unsigned int sect,
+ unsigned int head,unsigned int cyl,unsigned int cmd,
+ void (*intr_addr)(void))
+{
+ unsigned short port;
+
+#if (HD_DELAY > 0)
+ while (read_timer() - last_req < HD_DELAY)
+ /* nothing */;
+#endif
+ if (reset)
+ return;
+ if (!controller_ready(drive, head)) {
+ reset = 1;
+ return;
+ }
+ SET_HANDLER(intr_addr);
+ outb(hd_info[drive].ctl,HD_CMD);
+ port=HD_DATA + 2;
+ outb(hd_info[drive].wpcom>>2, port); port += 2;
+ outb(nsect, port); port += 2;
+ outb(sect, port); port += 2;
+ outb(cyl, port); port += 2;
+ outb(cyl>>8, port); port += 2;
+ outb(0xA0|(drive<<4)|head, port); port += 2;
+ outb(cmd, port);
+}
+
+static void hd_request (void);
+
+static int drive_busy(void)
+{
+ unsigned int i;
+ unsigned char c;
+
+ for (i = 0; i < 500000 ; i++) {
+ c = inb(HD_STATUS);
+ if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK)
+ return 0;
+ }
+ dump_status("reset timed out", c);
+ return 1;
+}
+
+static void reset_controller(void)
+{
+ int i;
+
+ outb(4,HD_CMD);
+ for(i = 0; i < 1000; i++) barrier();
+ outb(hd_info[0].ctl & 0x0f,HD_CMD);
+ for(i = 0; i < 1000; i++) barrier();
+ if (drive_busy())
+ printk("hd: controller still busy\n");
+ else if ((hd_error = inb(HD_ERROR)) != 1)
+ printk("hd: controller reset failed: %02x\n",hd_error);
+}
+
+static void reset_hd(void)
+{
+ static int i;
+
+repeat:
+ if (reset) {
+ reset = 0;
+ i = -1;
+ reset_controller();
+ } else {
+ check_status();
+ if (reset)
+ goto repeat;
+ }
+ if (++i < NR_HD) {
+ special_op[i] = recalibrate[i] = 1;
+ hd_out(i,hd_info[i].sect,hd_info[i].sect,hd_info[i].head-1,
+ hd_info[i].cyl,WIN_SPECIFY,&reset_hd);
+ if (reset)
+ goto repeat;
+ } else
+ hd_request();
+}
+
+/*
+ * Ok, don't know what to do with the unexpected interrupts: on some machines
+ * doing a reset and a retry seems to result in an eternal loop. Right now I
+ * ignore it, and just set the timeout.
+ *
+ * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the
+ * drive enters "idle", "standby", or "sleep" mode, so if the status looks
+ * "good", we just ignore the interrupt completely.
+ */
+void unexpected_hd_interrupt(void)
+{
+ unsigned int stat = inb(HD_STATUS);
+
+ if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) {
+ dump_status ("unexpected interrupt", stat);
+ SET_TIMER;
+ }
+}
+
+/*
+ * bad_rw_intr() now tries to be a bit smarter and does things
+ * according to the error returned by the controller.
+ * -Mika Liljeberg (liljeber@cs.Helsinki.FI)
+ */
+static void bad_rw_intr(void)
+{
+ int dev;
+
+ if (blk_queue_empty(QUEUE))
+ return;
+ dev = DEVICE_NR(CURRENT->rq_dev);
+ if (++CURRENT->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) {
+ end_request(CURRENT, 0);
+ special_op[dev] = recalibrate[dev] = 1;
+ } else if (CURRENT->errors % RESET_FREQ == 0)
+ reset = 1;
+ else if ((hd_error & TRK0_ERR) || CURRENT->errors % RECAL_FREQ == 0)
+ special_op[dev] = recalibrate[dev] = 1;
+ /* Otherwise just retry */
+}
+
+static inline int wait_DRQ(void)
+{
+ int retries = 100000, stat;
+
+ while (--retries > 0)
+ if ((stat = inb(HD_STATUS)) & DRQ_STAT)
+ return 0;
+ dump_status("wait_DRQ", stat);
+ return -1;
+}
+
+static void read_intr(void)
+{
+ int i, retries = 100000;
+
+ do {
+ i = (unsigned) inb(HD_STATUS);
+ if (i & BUSY_STAT)
+ continue;
+ if (!OK_STATUS(i))
+ break;
+ if (i & DRQ_STAT)
+ goto ok_to_read;
+ } while (--retries > 0);
+ dump_status("read_intr", i);
+ bad_rw_intr();
+ hd_request();
+ return;
+ok_to_read:
+ insw(HD_DATA,CURRENT->buffer,256);
+ CURRENT->sector++;
+ CURRENT->buffer += 512;
+ CURRENT->errors = 0;
+ i = --CURRENT->nr_sectors;
+ --CURRENT->current_nr_sectors;
+#ifdef DEBUG
+ printk("hd%c: read: sector %ld, remaining = %ld, buffer=0x%08lx\n",
+ dev+'a', CURRENT->sector, CURRENT->nr_sectors,
+ (unsigned long) CURRENT->buffer+512);
+#endif
+ if (CURRENT->current_nr_sectors <= 0)
+ end_request(CURRENT, 1);
+ if (i > 0) {
+ SET_HANDLER(&read_intr);
+ return;
+ }
+ (void) inb(HD_STATUS);
+#if (HD_DELAY > 0)
+ last_req = read_timer();
+#endif
+ if (!blk_queue_empty(QUEUE))
+ hd_request();
+ return;
+}
+
+static void write_intr(void)
+{
+ int i;
+ int retries = 100000;
+
+ do {
+ i = (unsigned) inb(HD_STATUS);
+ if (i & BUSY_STAT)
+ continue;
+ if (!OK_STATUS(i))
+ break;
+ if ((CURRENT->nr_sectors <= 1) || (i & DRQ_STAT))
+ goto ok_to_write;
+ } while (--retries > 0);
+ dump_status("write_intr", i);
+ bad_rw_intr();
+ hd_request();
+ return;
+ok_to_write:
+ CURRENT->sector++;
+ i = --CURRENT->nr_sectors;
+ --CURRENT->current_nr_sectors;
+ CURRENT->buffer += 512;
+ if (!i || (CURRENT->bio && !SUBSECTOR(i)))
+ end_request(CURRENT, 1);
+ if (i > 0) {
+ SET_HANDLER(&write_intr);
+ outsw(HD_DATA,CURRENT->buffer,256);
+ local_irq_enable();
+ } else {
+#if (HD_DELAY > 0)
+ last_req = read_timer();
+#endif
+ hd_request();
+ }
+ return;
+}
+
+static void recal_intr(void)
+{
+ check_status();
+#if (HD_DELAY > 0)
+ last_req = read_timer();
+#endif
+ hd_request();
+}
+
+/*
+ * This is another of the error-routines I don't know what to do with. The
+ * best idea seems to just set reset, and start all over again.
+ */
+static void hd_times_out(unsigned long dummy)
+{
+ unsigned int dev;
+
+ do_hd = NULL;
+
+ if (blk_queue_empty(QUEUE))
+ return;
+
+ disable_irq(HD_IRQ);
+ local_irq_enable();
+ reset = 1;
+ dev = DEVICE_NR(CURRENT->rq_dev);
+ printk("hd%c: timeout\n", dev+'a');
+ if (++CURRENT->errors >= MAX_ERRORS) {
+#ifdef DEBUG
+ printk("hd%c: too many errors\n", dev+'a');
+#endif
+ end_request(CURRENT, 0);
+ }
+ local_irq_disable();
+ hd_request();
+ enable_irq(HD_IRQ);
+}
+
+int do_special_op (unsigned int dev)
+{
+ if (recalibrate[dev]) {
+ recalibrate[dev] = 0;
+ hd_out(dev,hd_info[dev].sect,0,0,0,WIN_RESTORE,&recal_intr);
+ return reset;
+ }
+ if (hd_info[dev].head > 16) {
+ printk ("hd%c: cannot handle device with more than 16 heads - giving up\n", dev+'a');
+ end_request(CURRENT, 0);
+ }
+ special_op[dev] = 0;
+ return 1;
+}
+
+/*
+ * The driver enables interrupts as much as possible. In order to do this,
+ * (a) the device-interrupt is disabled before entering hd_request(),
+ * and (b) the timeout-interrupt is disabled before the sti().
+ *
+ * Interrupts are still masked (by default) whenever we are exchanging
+ * data/cmds with a drive, because some drives seem to have very poor
+ * tolerance for latency during I/O. The IDE driver has support to unmask
+ * interrupts for non-broken hardware, so use that driver if required.
+ */
+static void hd_request(void)
+{
+ unsigned int dev, block, nsect, sec, track, head, cyl;
+
+ if (do_hd)
+ return;
+repeat:
+ del_timer(&device_timer);
+ local_irq_enable();
+
+ if (blk_queue_empty(QUEUE)) {
+ do_hd = NULL;
+ return;
+ }
+
+ if (reset) {
+ local_irq_disable();
+ reset_hd();
+ return;
+ }
+ dev = DEVICE_NR(CURRENT->rq_dev);
+ block = CURRENT->sector;
+ nsect = CURRENT->nr_sectors;
+ if (dev >= NR_HD) {
+ printk("hd: bad disk number: %d\n", dev);
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+ if (block >= get_capacity(hd_gendisk[dev]) ||
+ ((block+nsect) > get_capacity(hd_gendisk[dev]))) {
+ printk("%s: bad access: block=%d, count=%d\n",
+ hd_gendisk[dev]->disk_name, block, nsect);
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+
+ if (special_op[dev]) {
+ if (do_special_op(dev))
+ goto repeat;
+ return;
+ }
+ sec = block % hd_info[dev].sect + 1;
+ track = block / hd_info[dev].sect;
+ head = track % hd_info[dev].head;
+ cyl = track / hd_info[dev].head;
+#ifdef DEBUG
+ printk("hd%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx\n",
+ dev+'a', (CURRENT->cmd == READ)?"read":"writ",
+ cyl, head, sec, nsect, (unsigned long) CURRENT->buffer);
+#endif
+ if(CURRENT->flags & REQ_CMD) {
+ switch (rq_data_dir(CURRENT)) {
+ case READ:
+ hd_out(dev,nsect,sec,head,cyl,WIN_READ,&read_intr);
+ if (reset)
+ goto repeat;
+ break;
+ case WRITE:
+ hd_out(dev,nsect,sec,head,cyl,WIN_WRITE,&write_intr);
+ if (reset)
+ goto repeat;
+ if (wait_DRQ()) {
+ bad_rw_intr();
+ goto repeat;
+ }
+ outsw(HD_DATA,CURRENT->buffer,256);
+ break;
+ default:
+ printk("unknown hd-command\n");
+ end_request(CURRENT, 0);
+ break;
+ }
+ }
+}
+
+static void do_hd_request (request_queue_t * q)
+{
+ disable_irq(HD_IRQ);
+ hd_request();
+ enable_irq(HD_IRQ);
+}
+
+static int hd_ioctl(struct inode * inode, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct hd_geometry *loc = (struct hd_geometry *) arg;
+ int dev;
+
+ if ((!inode) || kdev_none(inode->i_rdev))
+ return -EINVAL;
+ dev = DEVICE_NR(inode->i_rdev);
+ if (dev >= NR_HD)
+ return -EINVAL;
+ switch (cmd) {
+ case HDIO_GETGEO:
+ {
+ struct hd_geometry g;
+ if (!loc) return -EINVAL;
+ g.heads = hd_info[dev].head;
+ g.sectors = hd_info[dev].sect;
+ g.cylinders = hd_info[dev].cyl;
+ g.start = get_start_sect(inode->i_bdev);
+ return copy_to_user(loc, &g, sizeof g) ? -EFAULT : 0;
+ }
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int hd_open(struct inode * inode, struct file * filp)
+{
+ int target = DEVICE_NR(inode->i_rdev);
+ if (target >= NR_HD)
+ return -ENODEV;
+ return 0;
+}
+
+/*
+ * Releasing a block device means we sync() it, so that it can safely
+ * be forgotten about...
+ */
+
+extern struct block_device_operations hd_fops;
+
+static void hd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ void (*handler)(void) = do_hd;
+
+ do_hd = NULL;
+ del_timer(&device_timer);
+ if (!handler)
+ handler = unexpected_hd_interrupt;
+ handler();
+ local_irq_enable();
+}
+
+static struct block_device_operations hd_fops = {
+ .open = hd_open,
+ .ioctl = hd_ioctl,
+};
+
+/*
+ * This is the hard disk IRQ description. The SA_INTERRUPT in sa_flags
+ * means we run the IRQ-handler with interrupts disabled: this is bad for
+ * interrupt latency, but anything else has led to problems on some
+ * machines.
+ *
+ * We enable interrupts in some of the routines after making sure it's
+ * safe.
+ */
+
+static int __init hd_init(void)
+{
+ int drive;
+ if (register_blkdev(MAJOR_NR,"hd",&hd_fops)) {
+ printk("hd: unable to get major %d for hard disk\n",MAJOR_NR);
+ return -1;
+ }
+ blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), do_hd_request, &hd_lock);
+ blk_queue_max_sectors(BLK_DEFAULT_QUEUE(MAJOR_NR), 255);
+ init_timer(&device_timer);
+ device_timer.function = hd_times_out;
+ blk_queue_hardsect_size(QUEUE, 512);
+
+#ifdef __i386__
+ if (!NR_HD) {
+ extern struct drive_info drive_info;
+ unsigned char *BIOS = (unsigned char *) &drive_info;
+ unsigned long flags;
+#ifndef CONFIG_PC9800
+ int cmos_disks;
+#endif
+
+ for (drive=0 ; drive<2 ; drive++) {
+ hd_info[drive].cyl = *(unsigned short *) BIOS;
+ hd_info[drive].head = *(3+BIOS);
+ hd_info[drive].sect = *(2+BIOS);
+ hd_info[drive].wpcom = 0;
+ hd_info[drive].ctl = *(3+BIOS) > 8 ? 8 : 0;
+ hd_info[drive].lzone = *(unsigned short *) BIOS;
+ if (hd_info[drive].cyl && NR_HD == drive)
+ NR_HD++;
+ BIOS += 6;
+ }
+
+ }
+#endif /* __i386__ */
+#ifdef __arm__
+ if (!NR_HD) {
+ /* We don't know anything about the drive. This means
+ * that you *MUST* specify the drive parameters to the
+ * kernel yourself.
+ */
+ printk("hd: no drives specified - use hd=cyl,head,sectors"
+ " on kernel command line\n");
+ }
+#endif
+ if (!NR_HD)
+ goto out;
+
+ for (drive=0 ; drive < NR_HD ; drive++) {
+ struct gendisk *disk = alloc_disk();
+ if (!disk)
+ goto Enomem;
+ disk->major = MAJOR_NR;
+ disk->first_minor = drive << 6;
+ disk->minor_shift = 6;
+ disk->fops = &hd_fops;
+ sprintf(disk->disk_name, "hd%c", 'a'+drive);
+ hd_gendisk[drive] = disk;
+ }
+ for (drive=0 ; drive < NR_HD ; drive++) {
+ sector_t size = hd_info[drive].head *
+ hd_info[drive].sect * hd_info[drive].cyl;
+ set_capacity(hd_gendisk[drive], size);
+ printk ("%s: %ldMB, CHS=%d/%d/%d\n",
+ hd_gendisk[drive]->disk_name,
+ size / 2048, hd_info[drive].cyl,
+ hd_info[drive].head, hd_info[drive].sect);
+ }
+
+ if (request_irq(HD_IRQ, hd_interrupt, SA_INTERRUPT, "hd", NULL)) {
+ printk("hd: unable to get IRQ%d for the hard disk driver\n",
+ HD_IRQ);
+ goto out1;
+ }
+
+ if (!request_region(HD_DATA, 2, "hd(data)")) {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ NR_HD = 0;
+ free_irq(HD_IRQ, NULL);
+ return;
+ }
+
+ if (!request_region(HD_DATA + 2, 1, "hd"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ goto out2;
+ }
+
+ if (!request_region(HD_DATA + 4, 1, "hd"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ goto out3;
+ }
+
+ if (!request_region(HD_DATA + 6, 1, "hd"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ goto out4;
+ }
+
+ if (!request_region(HD_DATA + 8, 1, "hd"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ goto out5;
+ }
+
+ if (!request_region(HD_DATA + 10, 1, "hd"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ goto out6;
+ }
+
+ if (!request_region(HD_DATA + 12, 1, "hd"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
+ goto out7;
+ }
+
+ if (!request_region(HD_CMD, 1, "hd(cmd)"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD);
+ goto out8;
+ }
+
+ if (!request_region(HD_CMD + 2, 1, "hd(cmd)"))
+ {
+ printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD);
+ goto out9;
+ }
+
+ for(drive=0; drive < NR_HD; drive++) {
+ struct hd_i_struct *p = hd_info + drive;
+ set_capacity(hd_gendisk[drive], p->head * p->sect * p->cyl);
+ add_disk(hd_gendisk[drive]);
+ }
+ return 0;
+
+out9:
+ release_region(HD_CMD, 1);
+out8:
+ release_region(HD_DATA + 12, 1);
+out7:
+ release_region(HD_DATA + 10, 1);
+out6:
+ release_region(HD_DATA + 8, 1);
+out5:
+ release_region(HD_DATA + 6, 1);
+out4:
+ release_region(HD_DATA + 4, 1);
+out3:
+ release_region(HD_DATA + 2, 1);
+out2:
+ release_region(HD_DATA, 2);
+ free_irq(HD_IRQ, NULL);
+out1:
+ for (drive = 0; drive < NR_HD; drive++)
+ put_disk(hd_gendisk[drive]);
+ NR_HD = 0;
+out:
+ del_timer(&device_timer);
+ unregister_blkdev(MAJOR_NR,"hd");
+ blk_cleanup_queue(BLK_DEFAULT_QUEUE(MAJOR_NR));
+ return -1;
+Enomem:
+ while (drive--)
+ put_disk(hd_gendisk[drive]);
+ goto out;
+}
+
+static int parse_hd_setup (char *line) {
+ int ints[6];
+
+ (void) get_options(line, ARRAY_SIZE(ints), ints);
+ hd_setup(NULL, ints);
+
+ return 1;
+}
+__setup("hd=", parse_hd_setup);
+
+module_init(hd_init);
diff -urN linux/drivers/ide/legacy/pc9800.c linux98/drivers/ide/legacy/pc9800.c
--- linux/drivers/ide/legacy/pc9800.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/ide/legacy/pc9800.c Tue Oct 8 17:06:39 2002
@@ -0,0 +1,82 @@
+/*
+ * ide_pc9800.c
+ *
+ * Copyright (C) 1997-2000 Linux/98 project,
+ * Kyoto University Microcomputer Club.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/pc9800.h>
+
+#define PC9800_IDE_BANKSELECT 0x432
+
+#define DEBUG
+
+static void
+pc9800_select(ide_drive_t *drive)
+{
+#ifdef DEBUG
+ byte old;
+
+ /* Too noisy: */
+ /* printk(KERN_DEBUG "pc9800_select(%s)\n", drive->name); */
+
+ outb(0x80, PC9800_IDE_BANKSELECT);
+ old = inb(PC9800_IDE_BANKSELECT);
+ if (old != HWIF(drive)->index)
+ printk(KERN_DEBUG "ide-pc9800: switching bank #%d -> #%d\n",
+ old, HWIF(drive)->index);
+#endif
+ outb(HWIF(drive)->index, PC9800_IDE_BANKSELECT);
+}
+
+void __init
+ide_probe_for_pc9800(void)
+{
+ byte tmp;
+
+ if (!PC9800_9821_P() /* || !PC9821_IDEIF_DOUBLE_P() */)
+ return;
+
+ if (check_region(PC9800_IDE_BANKSELECT, 1)) {
+ printk(KERN_ERR
+ "ide: bank select port (%#x) is already occupied!\n",
+ PC9800_IDE_BANKSELECT);
+ return;
+ }
+
+ /* Do actual probing. */
+ if ((tmp = inb(PC9800_IDE_BANKSELECT)) == (byte) ~0
+ || (outb(tmp ^ 1, PC9800_IDE_BANKSELECT),
+ /* Next outb is dummy for reading status. */
+ outb(0x80, PC9800_IDE_BANKSELECT),
+ inb(PC9800_IDE_BANKSELECT) != (tmp ^ 1))) {
+ printk(KERN_INFO
+ "ide: pc9800 type bank selecting port not found\n");
+ return;
+ }
+ /* Restore original value, just in case. */
+ outb(tmp, PC9800_IDE_BANKSELECT);
+
+ request_region(PC9800_IDE_BANKSELECT, 1, "ide0/1 bank");
+
+ /* These ports are probably used by IDE I/F. */
+ request_region(0x430, 1, "ide");
+ request_region(0x435, 1, "ide");
+
+ if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET] == HD_DATA
+ && ide_hwifs[1].io_ports[IDE_DATA_OFFSET] == HD_DATA) {
+ ide_hwifs[0].chipset = ide_pc9800;
+ ide_hwifs[0].mate = &ide_hwifs[1];
+ ide_hwifs[0].selectproc = pc9800_select;
+ ide_hwifs[1].chipset = ide_pc9800;
+ ide_hwifs[1].mate = &ide_hwifs[0];
+ ide_hwifs[1].selectproc = pc9800_select;
+ }
+}
diff -urN linux/include/asm-i386/ide.h linux98/include/asm-i386/ide.h
--- linux/include/asm-i386/ide.h Sat Oct 12 13:21:31 2002
+++ linux98/include/asm-i386/ide.h Sun Oct 13 23:17:54 2002
@@ -26,6 +26,9 @@
static __inline__ int ide_default_irq(ide_ioreg_t base)
{
switch (base) {
+#ifdef CONFIG_PC9800
+ case 0x640: return 9;
+#endif /* CONFIG_PC9800 */
case 0x1f0: return 14;
case 0x170: return 15;
case 0x1e8: return 11;
@@ -39,7 +42,11 @@
static __inline__ ide_ioreg_t ide_default_io_base(int index)
{
+#ifndef CONFIG_PC9800
static unsigned long ata_io_base[MAX_HWIFS] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+#else /* CONFIG_PC9800 */
+ static unsigned long ata_io_base[MAX_HWIFS] = { 0x640, 0x640, 0, 0, 0, 0 };
+#endif /* !CONFIG_PC9800 */
return ata_io_base[index];
}
@@ -48,13 +55,24 @@
{
ide_ioreg_t reg = data_port;
int i;
+#ifdef CONFIG_PC9800
+ ide_ioreg_t increment = data_port == 0x640 ? 2 : 1;
+#endif
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hw->io_ports[i] = reg;
+#ifndef CONFIG_PC9800
reg += 1;
+#else
+ reg += increment;
+#endif
}
if (ctrl_port) {
hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+#ifdef CONFIG_PC9800
+ } else if (data_port == 0x640) {
+ hw->io_ports[IDE_CONTROL_OFFSET] = 0x74c;
+#endif
} else {
hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206;
}
diff -urN linux/include/linux/hdreg.h linux98/include/linux/hdreg.h
--- linux/include/linux/hdreg.h Sat Oct 12 13:22:07 2002
+++ linux98/include/linux/hdreg.h Sat Oct 12 19:38:02 2002
@@ -5,11 +5,13 @@
* This file contains some defines for the AT-hd-controller.
* Various sources.
*/
+#include <linux/config.h>
/* ide.c has its own port definitions in "ide.h" */
#define HD_IRQ 14
+#ifndef CONFIG_PC9800
/* Hd controller regs. Ref: IBM AT Bios-listing */
#define HD_DATA 0x1f0 /* _CTL when writing */
#define HD_ERROR 0x1f1 /* see err-bits */
@@ -25,6 +27,23 @@
#define HD_CMD 0x3f6 /* used for resets */
#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
+#else /* CONFIG_PC9800 */
+/* Hd controller regs. for NEC PC-9800 */
+#define HD_DATA 0x640 /* _CTL when writing */
+#define HD_ERROR 0x642 /* see err-bits */
+#define HD_NSECTOR 0x644 /* nr of sectors to read/write */
+#define HD_SECTOR 0x646 /* starting sector */
+#define HD_LCYL 0x648 /* starting cylinder */
+#define HD_HCYL 0x64a /* high byte of starting cyl */
+#define HD_CURRENT 0x64c /* 101dhhhh , d=drive, hhhh=head */
+#define HD_STATUS 0x64e /* see status-bits */
+#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
+#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
+#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
+
+#define HD_CMD 0x74c /* used for resets */
+#define HD_ALTSTATUS 0x74c /* same as HD_STATUS but doesn't clear irq */
+#endif /* CONFIG_PC9800 */
/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
diff -urN linux/include/linux/ide.h linux98/include/linux/ide.h
--- linux/include/linux/ide.h Sat Oct 12 13:21:41 2002
+++ linux98/include/linux/ide.h Sat Oct 12 14:18:54 2002
@@ -286,7 +286,7 @@
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_pdc4030, ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
- ide_pmac, ide_etrax100, ide_acorn
+ ide_pmac, ide_etrax100, ide_acorn, ide_pc9800
} hwif_chipset_t;
typedef struct ide_io_ops_s {
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 9/17] support PC-9800 against 2.5.45-ac1 (core#2)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (7 preceding siblings ...)
2002-11-06 18:22 ` [PATCHSET 8/17] support PC-9800 against 2.5.45-ac1 (IDE) Osamu Tomita
@ 2002-11-06 18:26 ` Osamu Tomita
2002-11-06 18:31 ` [PATCHSET 10/17] support PC-9800 against 2.5.45-ac1 (input) Osamu Tomita
` (7 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:26 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 478 bytes --]
This patch includes include/asm-i386/* files.
diffstat:
include/asm-i386/dma.h | 7 +
include/asm-i386/io.h | 6 +
include/asm-i386/irq.h | 4
include/asm-i386/pc9800.h | 27 ++++
include/asm-i386/pc9800_dma.h | 238 +++++++++++++++++++++++++++++++++++++++++ include/asm-i386/pgtable.h | 4
include/asm-i386/scatterlist.h | 6 +
include/asm-i386/timex.h | 4
8 files changed, 296 insertions(+)
--
Osamu Tomita
[-- Attachment #2: include-asm.patch --]
[-- Type: text/plain, Size: 12875 bytes --]
diff -urN linux/include/asm-i386/dma.h linux98/include/asm-i386/dma.h
--- linux/include/asm-i386/dma.h Sat Jul 21 04:52:59 2001
+++ linux98/include/asm-i386/dma.h Fri Aug 17 22:15:06 2001
@@ -10,6 +10,9 @@
#include <linux/config.h>
#include <linux/spinlock.h> /* And spinlocks */
+#ifdef CONFIG_PC9800
+#include <asm/pc9800_dma.h>
+#else /* !CONFIG_PC9800 */
#include <asm/io.h> /* need byte IO */
#include <linux/delay.h>
@@ -72,8 +75,10 @@
#define MAX_DMA_CHANNELS 8
+#ifndef CONFIG_PC9800
/* The maximum address that we can perform a DMA transfer to on this platform */
#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
+#endif
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
@@ -295,4 +300,6 @@
#define isa_dma_bridge_buggy (0)
#endif
+#endif /* CONFIG_PC9800 */
+
#endif /* _ASM_DMA_H */
diff -urN linux/include/asm-i386/io.h linux98/include/asm-i386/io.h
--- linux/include/asm-i386/io.h Sat Oct 12 13:22:45 2002
+++ linux98/include/asm-i386/io.h Sat Oct 12 19:25:19 2002
@@ -27,6 +27,8 @@
* Linus
*/
+#include <linux/config.h>
+
/*
* Bit simplified and optimized by Jan Hubicka
* Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
@@ -288,7 +290,11 @@
#ifdef SLOW_IO_BY_JUMPING
#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:"
#else
+#ifndef CONFIG_PC9800
#define __SLOW_DOWN_IO "outb %%al,$0x80;"
+#else
+#define __SLOW_DOWN_IO "outb %%al,$0x5f;"
+#endif
#endif
static inline void slow_down_io(void) {
diff -urN linux/include/asm-i386/irq.h linux98/include/asm-i386/irq.h
--- linux/include/asm-i386/irq.h Sat Sep 21 00:20:16 2002
+++ linux98/include/asm-i386/irq.h Sat Sep 21 07:17:56 2002
@@ -17,7 +17,11 @@
static __inline__ int irq_cannonicalize(int irq)
{
+#ifndef CONFIG_PC9800
return ((irq == 2) ? 9 : irq);
+#else
+ return ((irq == 7) ? 11 : irq);
+#endif
}
extern void disable_irq(unsigned int);
diff -urN linux/include/asm-i386/pc9800.h linux98/include/asm-i386/pc9800.h
--- linux/include/asm-i386/pc9800.h Thu Jan 1 09:00:00 1970
+++ linux98/include/asm-i386/pc9800.h Fri Aug 17 21:50:18 2001
@@ -0,0 +1,27 @@
+/*
+ * PC-9800 machine types.
+ *
+ * Copyright (C) 1999 TAKAI Kosuke <tak@kmc.kyoto-u.ac.jp>
+ * (Linux/98 Project)
+ */
+
+#ifndef _ASM_PC9800_H_
+#define _ASM_PC9800_H_
+
+#include <asm/pc9800_sca.h>
+#include <asm/types.h>
+
+#define __PC9800SCA(type, pa) (*(type *) phys_to_virt(pa))
+#define __PC9800SCA_TEST_BIT(pa, n) \
+ ((__PC9800SCA(u8, pa) & (1U << (n))) != 0)
+
+#define PC9800_HIGHRESO_P() __PC9800SCA_TEST_BIT(PC9800SCA_BIOS_FLAG, 3)
+#define PC9800_8MHz_P() __PC9800SCA_TEST_BIT(PC9800SCA_BIOS_FLAG, 7)
+
+ /* 0x2198 is 98 21 on memory... */
+#define PC9800_9821_P() (__PC9800SCA(u16, PC9821SCA_ROM_ID) == 0x2198)
+
+/* Note PC9821_...() are valid only when PC9800_9821_P() was true. */
+#define PC9821_IDEIF_DOUBLE_P() __PC9800SCA_TEST_BIT(PC9821SCA_ROM_FLAG4, 4)
+
+#endif
diff -urN linux/include/asm-i386/pc9800_dma.h linux98/include/asm-i386/pc9800_dma.h
--- linux/include/asm-i386/pc9800_dma.h Thu Jan 1 09:00:00 1970
+++ linux98/include/asm-i386/pc9800_dma.h Fri Aug 17 22:15:01 2001
@@ -0,0 +1,238 @@
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_PC9800_DMA_H
+#define _ASM_PC9800_DMA_H
+
+#include <linux/config.h>
+#include <asm/io.h> /* need byte IO */
+#include <linux/delay.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb outb_p
+#else
+#define dma_outb outb
+#endif
+
+#define dma_inb inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ * controller 1: channels 0-3, byte operations, ports 00-1F
+ * controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ * - ALL registers are 8 bits only, regardless of transfer size
+ * - channel 4 is not used - cascades 1 into 2.
+ * - channels 0-3 are byte - addresses/counts are for physical bytes
+ * - channels 5-7 are word - addresses/counts are for physical words
+ * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ * - transfer count loaded to registers is 1 less than actual count
+ * - controller 2 offsets are all even (2x offsets for controller 1)
+ * - page registers for 5-7 don't use data bit 0, represent 128K pages
+ * - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ * Address mapping for channels 0-3:
+ *
+ * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * P7 ... P0 A7 ... A0 A7 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Address mapping for channels 5-7:
+ *
+ * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
+ * | ... | \ \ ... \ \ \ ... \ \
+ * | ... | \ \ ... \ \ \ ... \ (not used)
+ * | ... | \ \ ... \ \ \ ... \
+ * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS 4
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS (~0UL)
+
+/* 8237 DMA controllers */
+#define IO_DMA_BASE 0x01
+
+/* DMA controller registers */
+#define DMA_CMD_REG ((IO_DMA_BASE)+0x10) /* command register (w) */
+#define DMA_STAT_REG ((IO_DMA_BASE)+0x10) /* status register (r) */
+#define DMA_REQ_REG ((IO_DMA_BASE)+0x12) /* request register (w) */
+#define DMA_MASK_REG ((IO_DMA_BASE)+0x14) /* single-channel mask (w) */
+#define DMA_MODE_REG ((IO_DMA_BASE)+0x16) /* mode register (w) */
+#define DMA_CLEAR_FF_REG ((IO_DMA_BASE)+0x18) /* clear pointer flip-flop (w) */
+#define DMA_TEMP_REG ((IO_DMA_BASE)+0x1A) /* Temporary Register (r) */
+#define DMA_RESET_REG ((IO_DMA_BASE)+0x1A) /* Master Clear (w) */
+#define DMA_CLR_MASK_REG ((IO_DMA_BASE)+0x1C) /* Clear Mask */
+#define DMA_MASK_ALL_REG ((IO_DMA_BASE)+0x1E) /* all-channels mask (w) */
+
+#define DMA_PAGE_0 0x27 /* DMA page registers */
+#define DMA_PAGE_1 0x21
+#define DMA_PAGE_2 0x23
+#define DMA_PAGE_3 0x25
+
+#define DMA_Ex_PAGE_0 0xe05 /* DMA Extended page reg base */
+#define DMA_Ex_PAGE_1 0xe07
+#define DMA_Ex_PAGE_2 0xe09
+#define DMA_Ex_PAGE_3 0xe0b
+
+#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_AUTOINIT 0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ dma_outb(dmanr, DMA_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ dma_outb(dmanr | 4, DMA_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+ dma_outb(0, DMA_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+ dma_outb(mode | dmanr, DMA_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
+{
+ unsigned char low=pagenr&0xff;
+ unsigned char hi=pagenr>>8;
+
+ switch(dmanr) {
+ case 0:
+ dma_outb(low, DMA_PAGE_0);
+ dma_outb(hi, DMA_Ex_PAGE_0);
+ break;
+ case 1:
+ dma_outb(low, DMA_PAGE_1);
+ dma_outb(hi, DMA_Ex_PAGE_1);
+ break;
+ case 2:
+ dma_outb(low, DMA_PAGE_2);
+ dma_outb(hi, DMA_Ex_PAGE_2);
+ break;
+ case 3:
+ dma_outb(low, DMA_PAGE_3);
+ dma_outb(hi, DMA_Ex_PAGE_3);
+ break;
+ }
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ set_dma_page(dmanr, a>>16);
+ dma_outb( a & 0xff, ((dmanr&3)<<2) + IO_DMA_BASE );
+ dma_outb( (a>>8) & 0xff, ((dmanr&3)<<2) + IO_DMA_BASE );
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ count--;
+ dma_outb( count & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA_BASE );
+ dma_outb( (count>>8) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA_BASE );
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ /* using short to get 16-bit wrap around */
+ unsigned short count;
+
+ count = 1 + dma_inb(((dmanr&3)<<2) + 2 + IO_DMA_BASE);
+ count += dma_inb(((dmanr&3)<<2) + 2 + IO_DMA_BASE) << 8;
+
+ return count;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_PC9800_DMA_H */
diff -urN linux/include/asm-i386/pgtable.h linux98/include/asm-i386/pgtable.h
--- linux/include/asm-i386/pgtable.h Mon Apr 15 04:18:55 2002
+++ linux98/include/asm-i386/pgtable.h Wed Apr 17 10:37:22 2002
@@ -58,7 +58,11 @@
#endif
#endif
+#ifndef CONFIG_PC9800
#define __beep() asm("movb $0x3,%al; outb %al,$0x61")
+#else
+#define __beep() asm("movb $0x6,%al; outb %al,$0x37")
+#endif
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
diff -urN linux/include/asm-i386/scatterlist.h linux98/include/asm-i386/scatterlist.h
--- linux/include/asm-i386/scatterlist.h Mon Apr 15 04:18:52 2002
+++ linux98/include/asm-i386/scatterlist.h Wed Apr 17 10:37:22 2002
@@ -1,6 +1,8 @@
#ifndef _I386_SCATTERLIST_H
#define _I386_SCATTERLIST_H
+#include <linux/config.h>
+
struct scatterlist {
struct page *page;
unsigned int offset;
@@ -8,6 +10,10 @@
unsigned int length;
};
+#ifdef CONFIG_PC9800
+#define ISA_DMA_THRESHOLD (0xffffffff)
+#else
#define ISA_DMA_THRESHOLD (0x00ffffff)
+#endif
#endif /* !(_I386_SCATTERLIST_H) */
diff -urN linux/include/asm-i386/timex.h linux98/include/asm-i386/timex.h
--- linux/include/asm-i386/timex.h Thu Feb 14 18:09:15 2002
+++ linux98/include/asm-i386/timex.h Thu Feb 14 23:58:57 2002
@@ -9,11 +9,15 @@
#include <linux/config.h>
#include <asm/msr.h>
+#ifdef CONFIG_PC9800
+ extern int CLOCK_TICK_RATE;
+#else
#ifdef CONFIG_MELAN
# define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
#else
# define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
#endif
+#endif
#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 10/17] support PC-9800 against 2.5.45-ac1 (input)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (8 preceding siblings ...)
2002-11-06 18:26 ` [PATCHSET 9/17] support PC-9800 against 2.5.45-ac1 (core#2) Osamu Tomita
@ 2002-11-06 18:31 ` Osamu Tomita
2002-11-08 22:24 ` Osamu Tomita
2002-11-06 18:36 ` [PATCHSET 11/17] support PC-9800 against 2.5.45-ac1 (kernel) Osamu Tomita
` (6 subsequent siblings)
16 siblings, 1 reply; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:31 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML, Vojtech Pavlik
[-- Attachment #1: Type: text/plain, Size: 822 bytes --]
This patch adds support for standard keyboard and mouse of PC-9800.
diffstat:
drivers/char/keyboard.c | 4
drivers/input/keyboard/98kbd.c | 356 +++++++++++++++++++++++++++++++++++++++ drivers/input/keyboard/Kconfig | 12 +
drivers/input/keyboard/Makefile | 1
drivers/input/misc/pcspkr.c | 24 ++
drivers/input/mouse/98busmouse.c | 201 ++++++++++++++++++++++
drivers/input/mouse/Kconfig | 12 +
drivers/input/mouse/Makefile | 1
drivers/input/serio/98kbd-io.c | 181 +++++++++++++++++++
drivers/input/serio/Kconfig | 12 +
drivers/input/serio/Makefile | 1
include/linux/kbd_kern.h | 5
include/linux/keyboard.h | 1
include/linux/serio.h | 1
14 files changed, 810 insertions(+), 2 deletions(-)
--
Osamu Tomita
[-- Attachment #2: input.patch --]
[-- Type: text/plain, Size: 26871 bytes --]
diff -urN linux/drivers/input/keyboard/Kconfig linux98/drivers/input/keyboard/Kconfig
--- linux/drivers/input/keyboard/Kconfig Thu Oct 31 13:23:13 2002
+++ linux98/drivers/input/keyboard/Kconfig Thu Oct 31 17:16:37 2002
@@ -88,3 +88,15 @@
The module will be called amikbd.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
+config KEYBOARD_98KBD
+ tristate "NEC PC-9800 Keyboard support"
+ depends on PC9800 && INPUT && INPUT_KEYBOARD && SERIO
+ help
+ Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
+ compatible) on your system.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called xtkbd.o. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux/drivers/input/keyboard/Makefile linux98/drivers/input/keyboard/Makefile
--- linux/drivers/input/keyboard/Makefile Sat Oct 12 13:21:42 2002
+++ linux98/drivers/input/keyboard/Makefile Sun Oct 13 11:27:15 2002
@@ -10,6 +10,7 @@
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
+obj-$(CONFIG_KEYBOARD_98KBD) += 98kbd.o
# The global Rules.make.
diff -urN linux/drivers/input/keyboard/98kbd.c linux98/drivers/input/keyboard/98kbd.c
--- linux/drivers/input/keyboard/98kbd.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/keyboard/98kbd.c Sun Oct 27 07:45:43 2002
@@ -0,0 +1,356 @@
+/*
+ * drivers/input/keyboard/98kbd.c
+ *
+ * PC-9801 keyboard driver for Linux
+ *
+ * Based on atkbd.c and xtkbd.c written by Vojtech Pavlik
+ *
+ * Copyright (c) 2002 Osamu Tomita
+ * Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+#include <asm/io.h>
+#include <asm/pc9800.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("PC-9801 keyboard driver");
+MODULE_LICENSE("GPL");
+
+#define KBD98_KEY 0x7f
+#define KBD98_RELEASE 0x80
+
+static unsigned char kbd98_keycode[256] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 43, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 41, 26, 28, 30, 31, 32,
+ 33, 34, 35, 36, 37, 38, 39, 40, 27, 44, 45, 46, 47, 48, 49, 50,
+ 51, 52, 53, 12, 57,184,109,104,110,111,103,105,106,108,102,107,
+ 74, 98, 71, 72, 73, 55, 75, 76, 77, 78, 79, 80, 81,117, 82,124,
+ 83,185, 87, 88, 85, 89, 90, 0, 0, 0, 0, 0, 0, 0,102, 0,
+ 99,133, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 0, 0, 0, 0,
+ 54, 58, 42, 56, 29
+};
+
+struct jis_kbd_conv {
+ unsigned char scancode;
+ struct {
+ unsigned char shift;
+ unsigned char keycode;
+ } emul[2];
+};
+
+static struct jis_kbd_conv kbd98_jis[] = {
+ {0x02, {{0, 3}, {1, 40}}},
+ {0x06, {{0, 7}, {1, 8}}},
+ {0x07, {{0, 8}, {0, 40}}},
+ {0x08, {{0, 9}, {1, 10}}},
+ {0x09, {{0, 10}, {1, 11}}},
+ {0x0a, {{0, 11}, {1, 255}}},
+ {0x0b, {{0, 12}, {0, 13}}},
+ {0x0c, {{1, 7}, {0, 41}}},
+ {0x1a, {{1, 3}, {1, 41}}},
+ {0x26, {{0, 39}, {1, 13}}},
+ {0x27, {{1, 39}, {1, 9}}},
+ {0x33, {{0, 255}, {1, 12}}},
+ {0xff, {{0, 255}, {1, 255}}} /* terminater */
+};
+
+#define KBD98_CMD_SETEXKEY 0x1095 /* Enable/Disable Windows, Appli key */
+#define KBD98_CMD_SETRATE 0x109c /* Set typematic rate */
+#define KBD98_CMD_SETLEDS 0x109d /* Set keyboard leds */
+#define KBD98_CMD_GETLEDS 0x119d /* Get keyboard leds */
+#define KBD98_CMD_GETID 0x019f
+
+#define KBD98_RET_ACK 0xfa
+#define KBD98_RET_NAK 0xfc /* Command NACK, send the cmd again */
+
+#define KBD98_KEY_JIS_EMUL 254
+#define KBD98_KEY_NULL 255
+
+static char *kbd98_name = "PC-9801 Keyboard";
+
+struct kbd98 {
+ unsigned char keycode[256];
+ struct input_dev dev;
+ struct serio *serio;
+ char phys[32];
+ unsigned char cmdbuf[4];
+ unsigned char cmdcnt;
+ signed char ack;
+ unsigned char shift;
+ struct jis_kbd_conv jis[16];
+};
+
+void kbd98_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+ struct kbd98 *kbd98 = serio->private;
+ unsigned char scancode, keycode;
+ int press, i;
+
+ switch (data) {
+ case KBD98_RET_ACK:
+ kbd98->ack = 1;
+ return;
+ case KBD98_RET_NAK:
+ kbd98->ack = -1;
+ return;
+ }
+
+ if (kbd98->cmdcnt) {
+ kbd98->cmdbuf[--kbd98->cmdcnt] = data;
+ return;
+ }
+
+ scancode = data & KBD98_KEY;
+ keycode = kbd98->keycode[scancode];
+ press = !(data & KBD98_RELEASE);
+ if (keycode == KEY_RIGHTSHIFT)
+ kbd98->shift = press;
+
+ switch (keycode) {
+ case KEY_2:
+ case KEY_6:
+ case KEY_7:
+ case KEY_8:
+ case KEY_9:
+ case KEY_0:
+ case KEY_MINUS:
+ case KEY_EQUAL:
+ case KEY_GRAVE:
+ case KEY_SEMICOLON:
+ case KEY_APOSTROPHE:
+ /* emulation: JIS keyboard to US101 keyboard */
+ i = 0;
+ while (kbd98->jis[i].scancode != 0xff) {
+ if (scancode == kbd98->jis[i].scancode)
+ break;
+ i ++;
+ }
+
+ keycode = kbd98->jis[i].emul[kbd98->shift].keycode;
+ if (keycode == KBD98_KEY_NULL)
+ return;
+
+ if (kbd98->jis[i].emul[kbd98->shift].shift != kbd98->shift && press) {
+ input_report_key(&kbd98->dev, KEY_RIGHTSHIFT, !(kbd98->shift));
+ }
+
+ input_report_key(&kbd98->dev, keycode, press);
+ if (kbd98->jis[i].emul[kbd98->shift].shift != kbd98->shift && !press) {
+ input_report_key(&kbd98->dev, KEY_RIGHTSHIFT, kbd98->shift);
+ }
+
+ input_sync(&kbd98->dev);
+ return;
+
+ case KBD98_KEY_NULL:
+ return;
+
+ case 0:
+ printk(KERN_WARNING "kbd98.c: Unknown key (scancode %#x) %s.\n",
+ data & KBD98_KEY, data & KBD98_RELEASE ? "released" : "pressed");
+ return;
+
+ default:
+ input_report_key(&kbd98->dev, keycode, press);
+ input_sync(&kbd98->dev);
+ }
+}
+
+/*
+ * kbd98_sendbyte() sends a byte to the keyboard, and waits for
+ * acknowledge. It doesn't handle resends according to the keyboard
+ * protocol specs, because if these are needed, the keyboard needs
+ * replacement anyway, and they only make a mess in the protocol.
+ */
+
+static int kbd98_sendbyte(struct kbd98 *kbd98, unsigned char byte)
+{
+ int timeout = 10000; /* 100 msec */
+ kbd98->ack = 0;
+
+ if (serio_write(kbd98->serio, byte))
+ return -1;
+
+ while (!kbd98->ack && timeout--) udelay(10);
+
+ return -(kbd98->ack <= 0);
+}
+
+/*
+ * kbd98_command() sends a command, and its parameters to the keyboard,
+ * then waits for the response and puts it in the param array.
+ */
+
+static int kbd98_command(struct kbd98 *kbd98, unsigned char *param, int command)
+{
+ int timeout = 50000; /* 500 msec */
+ int send = (command >> 12) & 0xf;
+ int receive = (command >> 8) & 0xf;
+ int i;
+
+ kbd98->cmdcnt = receive;
+
+ if (command & 0xff)
+ if (kbd98_sendbyte(kbd98, command & 0xff))
+ return (kbd98->cmdcnt = 0) - 1;
+
+ for (i = 0; i < send; i++)
+ if (kbd98_sendbyte(kbd98, param[i]))
+ return (kbd98->cmdcnt = 0) - 1;
+
+ while (kbd98->cmdcnt && timeout--) udelay(10);
+
+ if (param)
+ for (i = 0; i < receive; i++)
+ param[i] = kbd98->cmdbuf[(receive - 1) - i];
+
+ if (kbd98->cmdcnt)
+ return (kbd98->cmdcnt = 0) - 1;
+
+ return 0;
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here.
+ */
+
+static int kbd98_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ struct kbd98 *kbd98 = dev->private;
+ char param[2];
+
+ switch (type) {
+
+ case EV_LED:
+
+ if (__PC9800SCA_TEST_BIT(0x481, 3)) {
+ /* 98note with Num Lock key */
+ /* keep Num Lock status */
+ *param = 0x60;
+ if (kbd98_command(kbd98, param,
+ KBD98_CMD_GETLEDS))
+ printk(KERN_DEBUG
+ "kbd98: Get keyboard LED"
+ " status Error\n");
+
+ *param &= 1;
+ } else {
+ /* desktop PC-9801 */
+ *param = 1; /* Allways set Num Lock */
+ }
+
+ *param |= 0x70
+ | (test_bit(LED_CAPSL, dev->led) ? 4 : 0)
+ | (test_bit(LED_KANA, dev->led) ? 8 : 0);
+ kbd98_command(kbd98, param, KBD98_CMD_SETLEDS);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+void kbd98_connect(struct serio *serio, struct serio_dev *dev)
+{
+ struct kbd98 *kbd98;
+ int i;
+
+ if ((serio->type & SERIO_TYPE) != SERIO_PC9800)
+ return;
+
+ if (!(kbd98 = kmalloc(sizeof(struct kbd98), GFP_KERNEL)))
+ return;
+
+ memset(kbd98, 0, sizeof(struct kbd98));
+
+ kbd98->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ kbd98->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_KANA);
+
+ kbd98->serio = serio;
+
+ init_input_dev(&kbd98->dev);
+ kbd98->dev.keycode = kbd98->keycode;
+ kbd98->dev.keycodesize = sizeof(unsigned char);
+ kbd98->dev.keycodemax = ARRAY_SIZE(kbd98_keycode);
+ kbd98->dev.event = kbd98_event;
+ kbd98->dev.private = kbd98;
+
+ serio->private = kbd98;
+
+ if (serio_open(serio, dev)) {
+ kfree(kbd98);
+ return;
+ }
+
+ memcpy(kbd98->jis, kbd98_jis, sizeof(kbd98_jis));
+ memcpy(kbd98->keycode, kbd98_keycode, sizeof(kbd98->keycode));
+ for (i = 0; i < 255; i++)
+ set_bit(kbd98->keycode[i], kbd98->dev.keybit);
+ clear_bit(0, kbd98->dev.keybit);
+
+ sprintf(kbd98->phys, "%s/input0", serio->phys);
+
+ kbd98->dev.name = kbd98_name;
+ kbd98->dev.phys = kbd98->phys;
+ kbd98->dev.id.bustype = BUS_XTKBD;
+ kbd98->dev.id.vendor = 0x0002;
+ kbd98->dev.id.product = 0x0001;
+ kbd98->dev.id.version = 0x0100;
+
+ input_register_device(&kbd98->dev);
+
+ printk(KERN_INFO "input: %s on %s\n", kbd98_name, serio->phys);
+}
+
+void kbd98_disconnect(struct serio *serio)
+{
+ struct kbd98 *kbd98 = serio->private;
+ input_unregister_device(&kbd98->dev);
+ serio_close(serio);
+ kfree(kbd98);
+}
+
+struct serio_dev kbd98_dev = {
+ .interrupt = kbd98_interrupt,
+ .connect = kbd98_connect,
+ .disconnect = kbd98_disconnect
+};
+
+int __init kbd98_init(void)
+{
+ serio_register_device(&kbd98_dev);
+ return 0;
+}
+
+void __exit kbd98_exit(void)
+{
+ serio_unregister_device(&kbd98_dev);
+}
+
+module_init(kbd98_init);
+module_exit(kbd98_exit);
diff -urN linux/drivers/input/misc/pcspkr.c linux98/drivers/input/misc/pcspkr.c
--- linux/drivers/input/misc/pcspkr.c Mon Sep 16 11:18:31 2002
+++ linux98/drivers/input/misc/pcspkr.c Mon Sep 16 16:04:05 2002
@@ -12,6 +12,7 @@
* the Free Software Foundation
*/
+#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -23,7 +24,11 @@
MODULE_LICENSE("GPL");
static char pcspkr_name[] = "PC Speaker";
+#ifndef CONFIG_PC9800
static char pcspkr_phys[] = "isa0061/input0";
+#else
+static char pcspkr_phys[] = "isa3fdb/input0";
+#endif
static struct input_dev pcspkr_dev;
spinlock_t i8253_beep_lock = SPIN_LOCK_UNLOCKED;
@@ -43,11 +48,16 @@
}
if (value > 20 && value < 32767)
+#ifndef CONFIG_PC9800
count = 1193182 / value;
+#else
+ count = CLOCK_TICK_RATE / value;
+#endif
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
+#ifndef CONFIG_PC9800
/* enable counter 2 */
outb_p(inb_p(0x61) | 3, 0x61);
/* set command for counter 2, 2 byte write */
@@ -55,9 +65,23 @@
/* select desired HZ */
outb_p(count & 0xff, 0x42);
outb((count >> 8) & 0xff, 0x42);
+#else /* CONFIG_PC9800 */
+ outb(0x76, 0x3fdf);
+ outb(0, 0x5f);
+ outb(count & 0xff, 0x3fdb);
+ outb(0, 0x5f);
+ outb((count >> 8) & 0xff, 0x3fdb);
+ /* beep on */
+ outb(6, 0x37);
+#endif /* !CONFIG_PC9800 */
} else {
/* disable counter 2 */
+#ifndef CONFIG_PC9800
outb(inb_p(0x61) & 0xFC, 0x61);
+#else
+ /* beep off */
+ outb(7, 0x37);
+#endif
}
spin_unlock_irqrestore(&i8253_beep_lock, flags);
diff -urN linux/drivers/input/mouse/98busmouse.c linux98/drivers/input/mouse/98busmouse.c
--- linux/drivers/input/mouse/98busmouse.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/mouse/98busmouse.c Sat Oct 26 18:36:15 2002
@@ -0,0 +1,201 @@
+/*
+ *
+ * Copyright (c) 2002 Osamu Tomita
+ *
+ * Based on the work of:
+ * James Banks Matthew Dillon
+ * David Giller Nathan Laredo
+ * Linus Torvalds Johan Myreen
+ * Cliff Matthews Philip Blundell
+ * Russell King Vojtech Pavlik
+ */
+
+/*
+ * NEC PC-9801 Bus Mouse Driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/input.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("PC-9801 busmouse driver");
+MODULE_LICENSE("GPL");
+
+#define PC98BM_BASE 0x7fd9
+#define PC98BM_DATA_PORT PC98BM_BASE + 0
+/* PC98BM_SIGNATURE_PORT does not exist */
+#define PC98BM_CONTROL_PORT PC98BM_BASE + 4
+/* PC98BM_INTERRUPT_PORT does not exist */
+#define PC98BM_CONFIG_PORT PC98BM_BASE + 6
+
+#define PC98BM_ENABLE_IRQ 0x00
+#define PC98BM_DISABLE_IRQ 0x10
+#define PC98BM_READ_X_LOW 0x80
+#define PC98BM_READ_X_HIGH 0xa0
+#define PC98BM_READ_Y_LOW 0xc0
+#define PC98BM_READ_Y_HIGH 0xe0
+
+#define PC98BM_DEFAULT_MODE 0x93
+/* PC98BM_CONFIG_BYTE is not used */
+/* PC98BM_SIGNATURE_BYTE is not used */
+
+#define PC98BM_TIMER_PORT 0xbfdb
+#define PC98BM_DEFAULT_TIMER_VAL 0x00
+
+#define PC98BM_IRQ 13
+
+MODULE_PARM(pc98bm_irq, "i");
+
+static int pc98bm_irq = PC98BM_IRQ;
+static int pc98bm_used = 0;
+
+static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static int pc98bm_open(struct input_dev *dev)
+{
+ if (pc98bm_used++)
+ return 0;
+ if (request_irq(pc98bm_irq, pc98bm_interrupt, 0, "98busmouse", NULL)) {
+ pc98bm_used--;
+ printk(KERN_ERR "98busmouse.c: Can't allocate irq %d\n", pc98bm_irq);
+ return -EBUSY;
+ }
+ outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT);
+ return 0;
+}
+
+static void pc98bm_close(struct input_dev *dev)
+{
+ if (--pc98bm_used)
+ return;
+ outb(PC98BM_DISABLE_IRQ, PC98BM_CONTROL_PORT);
+ free_irq(pc98bm_irq, NULL);
+}
+
+static struct input_dev pc98bm_dev = {
+ .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
+ .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
+ .relbit = { BIT(REL_X) | BIT(REL_Y) },
+ .open = pc98bm_open,
+ .close = pc98bm_close,
+ .name = "PC-9801 bus mouse",
+ .phys = "isa7fd9/input0",
+ .id = {
+ .bustype = BUS_ISA,
+ .vendor = 0x0004,
+ .product = 0x0001,
+ .version = 0x0100,
+ },
+};
+
+static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ char dx, dy;
+ unsigned char buttons;
+
+ outb(PC98BM_READ_X_LOW, PC98BM_CONTROL_PORT);
+ dx = (inb(PC98BM_DATA_PORT) & 0xf);
+ outb(PC98BM_READ_X_HIGH, PC98BM_CONTROL_PORT);
+ dx |= (inb(PC98BM_DATA_PORT) & 0xf) << 4;
+ outb(PC98BM_READ_Y_LOW, PC98BM_CONTROL_PORT);
+ dy = (inb(PC98BM_DATA_PORT) & 0xf);
+ outb(PC98BM_READ_Y_HIGH, PC98BM_CONTROL_PORT);
+ buttons = inb(PC98BM_DATA_PORT);
+ dy |= (buttons & 0xf) << 4;
+ buttons = ~buttons >> 5;
+
+ input_report_rel(&pc98bm_dev, REL_X, dx);
+ input_report_rel(&pc98bm_dev, REL_Y, dy);
+ input_report_key(&pc98bm_dev, BTN_RIGHT, buttons & 1);
+ input_report_key(&pc98bm_dev, BTN_MIDDLE, buttons & 2);
+ input_report_key(&pc98bm_dev, BTN_LEFT, buttons & 4);
+ input_sync(&pc98bm_dev);
+
+ outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT);
+}
+
+#ifndef MODULE
+static int __init pc98bm_setup(char *str)
+{
+ int ints[4];
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+ if (ints[0] > 0) pc98bm_irq = ints[1];
+ return 1;
+}
+__setup("pc98bm_irq=", pc98bm_setup);
+#endif
+
+static int __init pc98bm_init(void)
+{
+ int i;
+
+ for (i = 0; i <= 6; i += 2) {
+ if (!request_region(PC98BM_BASE + i, 1, "98busmouse")) {
+ printk(KERN_ERR "98busmouse.c: Can't allocate ports at %#x\n", PC98BM_BASE + i);
+ while (i > 0) {
+ i -= 2;
+ release_region(PC98BM_BASE + i, 1);
+ }
+
+ return -EBUSY;
+ }
+
+ }
+
+ if (!request_region(PC98BM_TIMER_PORT, 1, "98busmouse")) {
+ printk(KERN_ERR "98busmouse.c: Can't allocate ports at %#x\n", PC98BM_TIMER_PORT);
+ for (i = 0; i <= 6; i += 2)
+ release_region(PC98BM_BASE + i, 1);
+
+ return -EBUSY;
+ }
+
+ outb(PC98BM_DEFAULT_MODE, PC98BM_CONFIG_PORT);
+ outb(PC98BM_DISABLE_IRQ, PC98BM_CONTROL_PORT);
+
+ outb(PC98BM_DEFAULT_TIMER_VAL, PC98BM_TIMER_PORT);
+
+ input_register_device(&pc98bm_dev);
+
+ printk(KERN_INFO "input: PC-9801 bus mouse at %#x irq %d\n", PC98BM_BASE, pc98bm_irq);
+
+ return 0;
+}
+
+static void __exit pc98bm_exit(void)
+{
+ int i;
+
+ input_unregister_device(&pc98bm_dev);
+ for (i = 0; i <= 6; i += 2)
+ release_region(PC98BM_BASE + i, 1);
+
+ release_region(PC98BM_TIMER_PORT, 1);
+}
+
+module_init(pc98bm_init);
+module_exit(pc98bm_exit);
diff -urN linux/drivers/input/mouse/Kconfig linux98/drivers/input/mouse/Kconfig
--- linux/drivers/input/mouse/Kconfig Thu Oct 31 13:23:13 2002
+++ linux98/drivers/input/mouse/Kconfig Thu Oct 31 17:24:14 2002
@@ -119,3 +119,15 @@
The module will be called rpcmouse.o. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
+config MOUSE_PC9800
+ tristate "NEC PC-9800 busmouse"
+ depends on PC9800 && INPUT && INPUT_MOUSE && ISA
+ help
+ Say Y here if you have NEC PC-9801/PC-9821 computer and want its
+ native mouse supported.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called logibm.o. If you want to compile it as a
+ module, say M here and read <file.:Documentation/modules.txt>.
+
diff -urN linux/drivers/input/mouse/Makefile linux98/drivers/input/mouse/Makefile
--- linux/drivers/input/mouse/Makefile Sat Oct 19 13:01:17 2002
+++ linux98/drivers/input/mouse/Makefile Thu Oct 31 17:25:12 2002
@@ -10,6 +10,7 @@
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
+obj-$(CONFIG_MOUSE_PC9800) += 98busmouse.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
diff -urN linux/drivers/input/serio/Kconfig linux98/drivers/input/serio/Kconfig
--- linux/drivers/input/serio/Kconfig Thu Oct 31 13:23:13 2002
+++ linux98/drivers/input/serio/Kconfig Thu Oct 31 17:34:00 2002
@@ -103,3 +103,15 @@
tristate "Intel SA1111 keyboard controller"
depends on SA1111 && SERIO
+config SERIO_98KBD
+ tristate "NEC PC-9800 keyboard controller"
+ depends on PC9800 && SERIO
+ help
+ Say Y here if you have the NEC PC-9801/PC-9821 and want to use its
+ standard keyboard connected to its keyboard controller.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called rpckbd.o. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux/drivers/input/serio/Makefile linux98/drivers/input/serio/Makefile
--- linux/drivers/input/serio/Makefile Sat Oct 19 13:01:09 2002
+++ linux98/drivers/input/serio/Makefile Thu Oct 24 15:50:55 2002
@@ -17,6 +17,7 @@
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
+obj-$(CONFIG_SERIO_98KBD) += 98kbd-io.o
# The global Rules.make.
diff -urN linux/drivers/input/serio/98kbd-io.c linux98/drivers/input/serio/98kbd-io.c
--- linux/drivers/input/serio/98kbd-io.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/serio/98kbd-io.c Thu Oct 24 16:29:57 2002
@@ -0,0 +1,181 @@
+/*
+ * NEC PC-9801 keyboard controller driver for Linux
+ *
+ * Copyright (c) 1999-2002 Osamu Tomita <tomita@cinet.co.jp>
+ * Based on i8042.c written by Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/sched.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("NEC PC-9801 keyboard controller driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Names.
+ */
+
+#define KBD98_PHYS_DESC "isa0041/serio0"
+
+/*
+ * IRQs.
+ */
+
+#define KBD98_IRQ 1
+
+/*
+ * Register numbers.
+ */
+
+#define KBD98_COMMAND_REG 0x43
+#define KBD98_STATUS_REG 0x43
+#define KBD98_DATA_REG 0x41
+
+spinlock_t kbd98io_lock = SPIN_LOCK_UNLOCKED;
+
+static struct serio kbd98_port;
+extern struct pt_regs *kbd_pt_regs;
+
+static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/*
+ * kbd98_flush() flushes all data that may be in the keyboard buffers
+ */
+
+static int kbd98_flush(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&kbd98io_lock, flags);
+
+ while (inb(KBD98_STATUS_REG) & 0x02) /* RxRDY */
+ inb(KBD98_DATA_REG);
+
+ if (inb(KBD98_STATUS_REG) & 0x38)
+ printk("98kbd-io: Keyboard error!\n");
+
+ spin_unlock_irqrestore(&kbd98io_lock, flags);
+
+ return 0;
+}
+
+/*
+ * kbd98_write() sends a byte out through the keyboard interface.
+ */
+
+static int kbd98_write(struct serio *port, unsigned char c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&kbd98io_lock, flags);
+
+ outb(0, 0x5f); /* wait */
+ outb(0x17, KBD98_COMMAND_REG); /* enable send command */
+ outb(0, 0x5f); /* wait */
+ outb(c, KBD98_DATA_REG);
+ outb(0, 0x5f); /* wait */
+ outb(0x16, KBD98_COMMAND_REG); /* disable send command */
+ outb(0, 0x5f); /* wait */
+
+ spin_unlock_irqrestore(&kbd98io_lock, flags);
+
+ return 0;
+}
+
+/*
+ * kbd98_open() is called when a port is open by the higher layer.
+ * It allocates the interrupt and enables in in the chip.
+ */
+
+static int kbd98_open(struct serio *port)
+{
+ kbd98_flush();
+
+ if (request_irq(KBD98_IRQ, kbd98io_interrupt, 0, "kbd98", NULL)) {
+ printk(KERN_ERR "98kbd-io.c: Can't get irq %d for %s, unregistering the port.\n", KBD98_IRQ, "KBD");
+ serio_unregister_port(port);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void kbd98_close(struct serio *port)
+{
+ free_irq(KBD98_IRQ, NULL);
+
+ kbd98_flush();
+}
+
+/*
+ * Structures for registering the devices in the serio.c module.
+ */
+
+static struct serio kbd98_port =
+{
+ .type = SERIO_PC9800,
+ .write = kbd98_write,
+ .open = kbd98_open,
+ .close = kbd98_close,
+ .driver = NULL,
+ .name = "PC-9801 Kbd Port",
+ .phys = KBD98_PHYS_DESC,
+};
+
+/*
+ * kbd98io_interrupt() is the most important function in this driver -
+ * it handles the interrupts from keyboard, and sends incoming bytes
+ * to the upper layers.
+ */
+
+static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+ unsigned char data;
+
+#ifdef CONFIG_VT
+ kbd_pt_regs = regs;
+#endif
+
+ spin_lock_irqsave(&kbd98io_lock, flags);
+
+ data = inb(KBD98_DATA_REG);
+ spin_unlock_irqrestore(&kbd98io_lock, flags);
+ serio_interrupt(&kbd98_port, data, 0);
+
+}
+
+int __init kbd98io_init(void)
+{
+ serio_register_port(&kbd98_port);
+
+ printk(KERN_INFO "serio: PC-9801 %s port at %#lx,%#lx irq %d\n",
+ "KBD",
+ (unsigned long) KBD98_DATA_REG,
+ (unsigned long) KBD98_COMMAND_REG,
+ KBD98_IRQ);
+
+ return 0;
+}
+
+void __exit kbd98io_exit(void)
+{
+ serio_unregister_port(&kbd98_port);
+}
+
+module_init(kbd98io_init);
+module_exit(kbd98io_exit);
diff -urN linux/drivers/char/keyboard.c linux98/drivers/char/keyboard.c
--- linux/drivers/char/keyboard.c Sat Oct 19 13:01:49 2002
+++ linux98/drivers/char/keyboard.c Sun Oct 27 09:12:29 2002
@@ -58,7 +58,11 @@
* Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
* This seems a good reason to start with NumLock off.
*/
+#ifndef CONFIG_PC9800
#define KBD_DEFLEDS 0
+#else
+#define KBD_DEFLEDS (1 << VC_NUMLOCK)
+#endif
#endif
#ifndef KBD_DEFLOCK
diff -urN linux/include/linux/kbd_kern.h linux98/include/linux/kbd_kern.h
--- linux/include/linux/kbd_kern.h Sat Oct 19 13:02:28 2002
+++ linux98/include/linux/kbd_kern.h Sun Oct 27 10:23:23 2002
@@ -43,11 +43,12 @@
#define LED_SHOW_IOCTL 1 /* only change leds upon ioctl */
#define LED_SHOW_MEM 2 /* `heartbeat': peek into memory */
- unsigned char ledflagstate:3; /* flags, not lights */
- unsigned char default_ledflagstate:3;
+ unsigned char ledflagstate:4; /* flags, not lights */
+ unsigned char default_ledflagstate:4;
#define VC_SCROLLOCK 0 /* scroll-lock mode */
#define VC_NUMLOCK 1 /* numeric lock mode */
#define VC_CAPSLOCK 2 /* capslock mode */
+#define VC_KANALOCK 3 /* kanalock mode */
unsigned char kbdmode:2; /* one 2-bit value */
#define VC_XLATE 0 /* translate keycodes using keymap */
diff -urN linux/include/linux/keyboard.h linux98/include/linux/keyboard.h
--- linux/include/linux/keyboard.h Sat Oct 19 13:01:13 2002
+++ linux98/include/linux/keyboard.h Mon Oct 21 15:59:48 2002
@@ -9,6 +9,7 @@
#define KG_ALT 3
#define KG_ALTGR 1
#define KG_SHIFTL 4
+#define KG_KANASHIFT 4
#define KG_SHIFTR 5
#define KG_CTRLL 6
#define KG_CTRLR 7
diff -urN linux/include/linux/serio.h linux98/include/linux/serio.h
--- linux/include/linux/serio.h Sat Oct 19 13:01:58 2002
+++ linux98/include/linux/serio.h Thu Oct 24 09:39:09 2002
@@ -97,6 +97,7 @@
#define SERIO_8042 0x01000000UL
#define SERIO_RS232 0x02000000UL
#define SERIO_HIL_MLC 0x03000000UL
+#define SERIO_PC9800 0x04000000UL
#define SERIO_PROTO 0xFFUL
#define SERIO_MSC 0x01
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCHSET 10/17] support PC-9800 against 2.5.45-ac1 (input)
2002-11-06 18:31 ` [PATCHSET 10/17] support PC-9800 against 2.5.45-ac1 (input) Osamu Tomita
@ 2002-11-08 22:24 ` Osamu Tomita
0 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-08 22:24 UTC (permalink / raw)
To: LKML; +Cc: Alan Cox, Vojtech Pavlik
[-- Attachment #1: Type: text/plain, Size: 298 bytes --]
I've updated input driver for PC-9800. And tested by some japanese
users, mainly Linux98-usrs mailing list members.
This improve translation from japanese keyboard to us keyboard.
Please apply.
Here are whole input.patch against 2.5.45-ac1 and 98kbd.c diffs
from previous version.
Regards,
Osamu
[-- Attachment #2: input.patch --]
[-- Type: text/plain, Size: 26871 bytes --]
diff -urN linux/drivers/input/keyboard/Kconfig linux98/drivers/input/keyboard/Kconfig
--- linux/drivers/input/keyboard/Kconfig Thu Oct 31 13:23:13 2002
+++ linux98/drivers/input/keyboard/Kconfig Thu Oct 31 17:16:37 2002
@@ -88,3 +88,15 @@
The module will be called amikbd.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
+config KEYBOARD_98KBD
+ tristate "NEC PC-9800 Keyboard support"
+ depends on PC9800 && INPUT && INPUT_KEYBOARD && SERIO
+ help
+ Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
+ compatible) on your system.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called xtkbd.o. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux/drivers/input/keyboard/Makefile linux98/drivers/input/keyboard/Makefile
--- linux/drivers/input/keyboard/Makefile Sat Oct 12 13:21:42 2002
+++ linux98/drivers/input/keyboard/Makefile Sun Oct 13 11:27:15 2002
@@ -10,6 +10,7 @@
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
+obj-$(CONFIG_KEYBOARD_98KBD) += 98kbd.o
# The global Rules.make.
diff -urN linux/drivers/input/keyboard/98kbd.c linux98/drivers/input/keyboard/98kbd.c
--- linux/drivers/input/keyboard/98kbd.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/keyboard/98kbd.c Sun Oct 27 07:45:43 2002
@@ -0,0 +1,356 @@
+/*
+ * drivers/input/keyboard/98kbd.c
+ *
+ * PC-9801 keyboard driver for Linux
+ *
+ * Based on atkbd.c and xtkbd.c written by Vojtech Pavlik
+ *
+ * Copyright (c) 2002 Osamu Tomita
+ * Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+#include <asm/io.h>
+#include <asm/pc9800.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("PC-9801 keyboard driver");
+MODULE_LICENSE("GPL");
+
+#define KBD98_KEY 0x7f
+#define KBD98_RELEASE 0x80
+
+static unsigned char kbd98_keycode[256] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 43, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 41, 26, 28, 30, 31, 32,
+ 33, 34, 35, 36, 37, 38, 39, 40, 27, 44, 45, 46, 47, 48, 49, 50,
+ 51, 52, 53, 12, 57,184,109,104,110,111,103,105,106,108,102,107,
+ 74, 98, 71, 72, 73, 55, 75, 76, 77, 78, 79, 80, 81,117, 82,124,
+ 83,185, 87, 88, 85, 89, 90, 0, 0, 0, 0, 0, 0, 0,102, 0,
+ 99,133, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 0, 0, 0, 0,
+ 54, 58, 42, 56, 29
+};
+
+struct jis_kbd_conv {
+ unsigned char scancode;
+ struct {
+ unsigned char shift;
+ unsigned char keycode;
+ } emul[2];
+};
+
+static struct jis_kbd_conv kbd98_jis[] = {
+ {0x02, {{0, 3}, {1, 40}}},
+ {0x06, {{0, 7}, {1, 8}}},
+ {0x07, {{0, 8}, {0, 40}}},
+ {0x08, {{0, 9}, {1, 10}}},
+ {0x09, {{0, 10}, {1, 11}}},
+ {0x0a, {{0, 11}, {1, 255}}},
+ {0x0b, {{0, 12}, {0, 13}}},
+ {0x0c, {{1, 7}, {0, 41}}},
+ {0x1a, {{1, 3}, {1, 41}}},
+ {0x26, {{0, 39}, {1, 13}}},
+ {0x27, {{1, 39}, {1, 9}}},
+ {0x33, {{0, 255}, {1, 12}}},
+ {0xff, {{0, 255}, {1, 255}}} /* terminater */
+};
+
+#define KBD98_CMD_SETEXKEY 0x1095 /* Enable/Disable Windows, Appli key */
+#define KBD98_CMD_SETRATE 0x109c /* Set typematic rate */
+#define KBD98_CMD_SETLEDS 0x109d /* Set keyboard leds */
+#define KBD98_CMD_GETLEDS 0x119d /* Get keyboard leds */
+#define KBD98_CMD_GETID 0x019f
+
+#define KBD98_RET_ACK 0xfa
+#define KBD98_RET_NAK 0xfc /* Command NACK, send the cmd again */
+
+#define KBD98_KEY_JIS_EMUL 254
+#define KBD98_KEY_NULL 255
+
+static char *kbd98_name = "PC-9801 Keyboard";
+
+struct kbd98 {
+ unsigned char keycode[256];
+ struct input_dev dev;
+ struct serio *serio;
+ char phys[32];
+ unsigned char cmdbuf[4];
+ unsigned char cmdcnt;
+ signed char ack;
+ unsigned char shift;
+ struct jis_kbd_conv jis[16];
+};
+
+void kbd98_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+ struct kbd98 *kbd98 = serio->private;
+ unsigned char scancode, keycode;
+ int press, i;
+
+ switch (data) {
+ case KBD98_RET_ACK:
+ kbd98->ack = 1;
+ return;
+ case KBD98_RET_NAK:
+ kbd98->ack = -1;
+ return;
+ }
+
+ if (kbd98->cmdcnt) {
+ kbd98->cmdbuf[--kbd98->cmdcnt] = data;
+ return;
+ }
+
+ scancode = data & KBD98_KEY;
+ keycode = kbd98->keycode[scancode];
+ press = !(data & KBD98_RELEASE);
+ if (keycode == KEY_RIGHTSHIFT)
+ kbd98->shift = press;
+
+ switch (keycode) {
+ case KEY_2:
+ case KEY_6:
+ case KEY_7:
+ case KEY_8:
+ case KEY_9:
+ case KEY_0:
+ case KEY_MINUS:
+ case KEY_EQUAL:
+ case KEY_GRAVE:
+ case KEY_SEMICOLON:
+ case KEY_APOSTROPHE:
+ /* emulation: JIS keyboard to US101 keyboard */
+ i = 0;
+ while (kbd98->jis[i].scancode != 0xff) {
+ if (scancode == kbd98->jis[i].scancode)
+ break;
+ i ++;
+ }
+
+ keycode = kbd98->jis[i].emul[kbd98->shift].keycode;
+ if (keycode == KBD98_KEY_NULL)
+ return;
+
+ if (kbd98->jis[i].emul[kbd98->shift].shift != kbd98->shift && press) {
+ input_report_key(&kbd98->dev, KEY_RIGHTSHIFT, !(kbd98->shift));
+ }
+
+ input_report_key(&kbd98->dev, keycode, press);
+ if (kbd98->jis[i].emul[kbd98->shift].shift != kbd98->shift && !press) {
+ input_report_key(&kbd98->dev, KEY_RIGHTSHIFT, kbd98->shift);
+ }
+
+ input_sync(&kbd98->dev);
+ return;
+
+ case KBD98_KEY_NULL:
+ return;
+
+ case 0:
+ printk(KERN_WARNING "kbd98.c: Unknown key (scancode %#x) %s.\n",
+ data & KBD98_KEY, data & KBD98_RELEASE ? "released" : "pressed");
+ return;
+
+ default:
+ input_report_key(&kbd98->dev, keycode, press);
+ input_sync(&kbd98->dev);
+ }
+}
+
+/*
+ * kbd98_sendbyte() sends a byte to the keyboard, and waits for
+ * acknowledge. It doesn't handle resends according to the keyboard
+ * protocol specs, because if these are needed, the keyboard needs
+ * replacement anyway, and they only make a mess in the protocol.
+ */
+
+static int kbd98_sendbyte(struct kbd98 *kbd98, unsigned char byte)
+{
+ int timeout = 10000; /* 100 msec */
+ kbd98->ack = 0;
+
+ if (serio_write(kbd98->serio, byte))
+ return -1;
+
+ while (!kbd98->ack && timeout--) udelay(10);
+
+ return -(kbd98->ack <= 0);
+}
+
+/*
+ * kbd98_command() sends a command, and its parameters to the keyboard,
+ * then waits for the response and puts it in the param array.
+ */
+
+static int kbd98_command(struct kbd98 *kbd98, unsigned char *param, int command)
+{
+ int timeout = 50000; /* 500 msec */
+ int send = (command >> 12) & 0xf;
+ int receive = (command >> 8) & 0xf;
+ int i;
+
+ kbd98->cmdcnt = receive;
+
+ if (command & 0xff)
+ if (kbd98_sendbyte(kbd98, command & 0xff))
+ return (kbd98->cmdcnt = 0) - 1;
+
+ for (i = 0; i < send; i++)
+ if (kbd98_sendbyte(kbd98, param[i]))
+ return (kbd98->cmdcnt = 0) - 1;
+
+ while (kbd98->cmdcnt && timeout--) udelay(10);
+
+ if (param)
+ for (i = 0; i < receive; i++)
+ param[i] = kbd98->cmdbuf[(receive - 1) - i];
+
+ if (kbd98->cmdcnt)
+ return (kbd98->cmdcnt = 0) - 1;
+
+ return 0;
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here.
+ */
+
+static int kbd98_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ struct kbd98 *kbd98 = dev->private;
+ char param[2];
+
+ switch (type) {
+
+ case EV_LED:
+
+ if (__PC9800SCA_TEST_BIT(0x481, 3)) {
+ /* 98note with Num Lock key */
+ /* keep Num Lock status */
+ *param = 0x60;
+ if (kbd98_command(kbd98, param,
+ KBD98_CMD_GETLEDS))
+ printk(KERN_DEBUG
+ "kbd98: Get keyboard LED"
+ " status Error\n");
+
+ *param &= 1;
+ } else {
+ /* desktop PC-9801 */
+ *param = 1; /* Allways set Num Lock */
+ }
+
+ *param |= 0x70
+ | (test_bit(LED_CAPSL, dev->led) ? 4 : 0)
+ | (test_bit(LED_KANA, dev->led) ? 8 : 0);
+ kbd98_command(kbd98, param, KBD98_CMD_SETLEDS);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+void kbd98_connect(struct serio *serio, struct serio_dev *dev)
+{
+ struct kbd98 *kbd98;
+ int i;
+
+ if ((serio->type & SERIO_TYPE) != SERIO_PC9800)
+ return;
+
+ if (!(kbd98 = kmalloc(sizeof(struct kbd98), GFP_KERNEL)))
+ return;
+
+ memset(kbd98, 0, sizeof(struct kbd98));
+
+ kbd98->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ kbd98->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_KANA);
+
+ kbd98->serio = serio;
+
+ init_input_dev(&kbd98->dev);
+ kbd98->dev.keycode = kbd98->keycode;
+ kbd98->dev.keycodesize = sizeof(unsigned char);
+ kbd98->dev.keycodemax = ARRAY_SIZE(kbd98_keycode);
+ kbd98->dev.event = kbd98_event;
+ kbd98->dev.private = kbd98;
+
+ serio->private = kbd98;
+
+ if (serio_open(serio, dev)) {
+ kfree(kbd98);
+ return;
+ }
+
+ memcpy(kbd98->jis, kbd98_jis, sizeof(kbd98_jis));
+ memcpy(kbd98->keycode, kbd98_keycode, sizeof(kbd98->keycode));
+ for (i = 0; i < 255; i++)
+ set_bit(kbd98->keycode[i], kbd98->dev.keybit);
+ clear_bit(0, kbd98->dev.keybit);
+
+ sprintf(kbd98->phys, "%s/input0", serio->phys);
+
+ kbd98->dev.name = kbd98_name;
+ kbd98->dev.phys = kbd98->phys;
+ kbd98->dev.id.bustype = BUS_XTKBD;
+ kbd98->dev.id.vendor = 0x0002;
+ kbd98->dev.id.product = 0x0001;
+ kbd98->dev.id.version = 0x0100;
+
+ input_register_device(&kbd98->dev);
+
+ printk(KERN_INFO "input: %s on %s\n", kbd98_name, serio->phys);
+}
+
+void kbd98_disconnect(struct serio *serio)
+{
+ struct kbd98 *kbd98 = serio->private;
+ input_unregister_device(&kbd98->dev);
+ serio_close(serio);
+ kfree(kbd98);
+}
+
+struct serio_dev kbd98_dev = {
+ .interrupt = kbd98_interrupt,
+ .connect = kbd98_connect,
+ .disconnect = kbd98_disconnect
+};
+
+int __init kbd98_init(void)
+{
+ serio_register_device(&kbd98_dev);
+ return 0;
+}
+
+void __exit kbd98_exit(void)
+{
+ serio_unregister_device(&kbd98_dev);
+}
+
+module_init(kbd98_init);
+module_exit(kbd98_exit);
diff -urN linux/drivers/input/misc/pcspkr.c linux98/drivers/input/misc/pcspkr.c
--- linux/drivers/input/misc/pcspkr.c Mon Sep 16 11:18:31 2002
+++ linux98/drivers/input/misc/pcspkr.c Mon Sep 16 16:04:05 2002
@@ -12,6 +12,7 @@
* the Free Software Foundation
*/
+#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -23,7 +24,11 @@
MODULE_LICENSE("GPL");
static char pcspkr_name[] = "PC Speaker";
+#ifndef CONFIG_PC9800
static char pcspkr_phys[] = "isa0061/input0";
+#else
+static char pcspkr_phys[] = "isa3fdb/input0";
+#endif
static struct input_dev pcspkr_dev;
spinlock_t i8253_beep_lock = SPIN_LOCK_UNLOCKED;
@@ -43,11 +48,16 @@
}
if (value > 20 && value < 32767)
+#ifndef CONFIG_PC9800
count = 1193182 / value;
+#else
+ count = CLOCK_TICK_RATE / value;
+#endif
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
+#ifndef CONFIG_PC9800
/* enable counter 2 */
outb_p(inb_p(0x61) | 3, 0x61);
/* set command for counter 2, 2 byte write */
@@ -55,9 +65,23 @@
/* select desired HZ */
outb_p(count & 0xff, 0x42);
outb((count >> 8) & 0xff, 0x42);
+#else /* CONFIG_PC9800 */
+ outb(0x76, 0x3fdf);
+ outb(0, 0x5f);
+ outb(count & 0xff, 0x3fdb);
+ outb(0, 0x5f);
+ outb((count >> 8) & 0xff, 0x3fdb);
+ /* beep on */
+ outb(6, 0x37);
+#endif /* !CONFIG_PC9800 */
} else {
/* disable counter 2 */
+#ifndef CONFIG_PC9800
outb(inb_p(0x61) & 0xFC, 0x61);
+#else
+ /* beep off */
+ outb(7, 0x37);
+#endif
}
spin_unlock_irqrestore(&i8253_beep_lock, flags);
diff -urN linux/drivers/input/mouse/98busmouse.c linux98/drivers/input/mouse/98busmouse.c
--- linux/drivers/input/mouse/98busmouse.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/mouse/98busmouse.c Sat Oct 26 18:36:15 2002
@@ -0,0 +1,201 @@
+/*
+ *
+ * Copyright (c) 2002 Osamu Tomita
+ *
+ * Based on the work of:
+ * James Banks Matthew Dillon
+ * David Giller Nathan Laredo
+ * Linus Torvalds Johan Myreen
+ * Cliff Matthews Philip Blundell
+ * Russell King Vojtech Pavlik
+ */
+
+/*
+ * NEC PC-9801 Bus Mouse Driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/input.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("PC-9801 busmouse driver");
+MODULE_LICENSE("GPL");
+
+#define PC98BM_BASE 0x7fd9
+#define PC98BM_DATA_PORT PC98BM_BASE + 0
+/* PC98BM_SIGNATURE_PORT does not exist */
+#define PC98BM_CONTROL_PORT PC98BM_BASE + 4
+/* PC98BM_INTERRUPT_PORT does not exist */
+#define PC98BM_CONFIG_PORT PC98BM_BASE + 6
+
+#define PC98BM_ENABLE_IRQ 0x00
+#define PC98BM_DISABLE_IRQ 0x10
+#define PC98BM_READ_X_LOW 0x80
+#define PC98BM_READ_X_HIGH 0xa0
+#define PC98BM_READ_Y_LOW 0xc0
+#define PC98BM_READ_Y_HIGH 0xe0
+
+#define PC98BM_DEFAULT_MODE 0x93
+/* PC98BM_CONFIG_BYTE is not used */
+/* PC98BM_SIGNATURE_BYTE is not used */
+
+#define PC98BM_TIMER_PORT 0xbfdb
+#define PC98BM_DEFAULT_TIMER_VAL 0x00
+
+#define PC98BM_IRQ 13
+
+MODULE_PARM(pc98bm_irq, "i");
+
+static int pc98bm_irq = PC98BM_IRQ;
+static int pc98bm_used = 0;
+
+static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static int pc98bm_open(struct input_dev *dev)
+{
+ if (pc98bm_used++)
+ return 0;
+ if (request_irq(pc98bm_irq, pc98bm_interrupt, 0, "98busmouse", NULL)) {
+ pc98bm_used--;
+ printk(KERN_ERR "98busmouse.c: Can't allocate irq %d\n", pc98bm_irq);
+ return -EBUSY;
+ }
+ outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT);
+ return 0;
+}
+
+static void pc98bm_close(struct input_dev *dev)
+{
+ if (--pc98bm_used)
+ return;
+ outb(PC98BM_DISABLE_IRQ, PC98BM_CONTROL_PORT);
+ free_irq(pc98bm_irq, NULL);
+}
+
+static struct input_dev pc98bm_dev = {
+ .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
+ .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
+ .relbit = { BIT(REL_X) | BIT(REL_Y) },
+ .open = pc98bm_open,
+ .close = pc98bm_close,
+ .name = "PC-9801 bus mouse",
+ .phys = "isa7fd9/input0",
+ .id = {
+ .bustype = BUS_ISA,
+ .vendor = 0x0004,
+ .product = 0x0001,
+ .version = 0x0100,
+ },
+};
+
+static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ char dx, dy;
+ unsigned char buttons;
+
+ outb(PC98BM_READ_X_LOW, PC98BM_CONTROL_PORT);
+ dx = (inb(PC98BM_DATA_PORT) & 0xf);
+ outb(PC98BM_READ_X_HIGH, PC98BM_CONTROL_PORT);
+ dx |= (inb(PC98BM_DATA_PORT) & 0xf) << 4;
+ outb(PC98BM_READ_Y_LOW, PC98BM_CONTROL_PORT);
+ dy = (inb(PC98BM_DATA_PORT) & 0xf);
+ outb(PC98BM_READ_Y_HIGH, PC98BM_CONTROL_PORT);
+ buttons = inb(PC98BM_DATA_PORT);
+ dy |= (buttons & 0xf) << 4;
+ buttons = ~buttons >> 5;
+
+ input_report_rel(&pc98bm_dev, REL_X, dx);
+ input_report_rel(&pc98bm_dev, REL_Y, dy);
+ input_report_key(&pc98bm_dev, BTN_RIGHT, buttons & 1);
+ input_report_key(&pc98bm_dev, BTN_MIDDLE, buttons & 2);
+ input_report_key(&pc98bm_dev, BTN_LEFT, buttons & 4);
+ input_sync(&pc98bm_dev);
+
+ outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT);
+}
+
+#ifndef MODULE
+static int __init pc98bm_setup(char *str)
+{
+ int ints[4];
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+ if (ints[0] > 0) pc98bm_irq = ints[1];
+ return 1;
+}
+__setup("pc98bm_irq=", pc98bm_setup);
+#endif
+
+static int __init pc98bm_init(void)
+{
+ int i;
+
+ for (i = 0; i <= 6; i += 2) {
+ if (!request_region(PC98BM_BASE + i, 1, "98busmouse")) {
+ printk(KERN_ERR "98busmouse.c: Can't allocate ports at %#x\n", PC98BM_BASE + i);
+ while (i > 0) {
+ i -= 2;
+ release_region(PC98BM_BASE + i, 1);
+ }
+
+ return -EBUSY;
+ }
+
+ }
+
+ if (!request_region(PC98BM_TIMER_PORT, 1, "98busmouse")) {
+ printk(KERN_ERR "98busmouse.c: Can't allocate ports at %#x\n", PC98BM_TIMER_PORT);
+ for (i = 0; i <= 6; i += 2)
+ release_region(PC98BM_BASE + i, 1);
+
+ return -EBUSY;
+ }
+
+ outb(PC98BM_DEFAULT_MODE, PC98BM_CONFIG_PORT);
+ outb(PC98BM_DISABLE_IRQ, PC98BM_CONTROL_PORT);
+
+ outb(PC98BM_DEFAULT_TIMER_VAL, PC98BM_TIMER_PORT);
+
+ input_register_device(&pc98bm_dev);
+
+ printk(KERN_INFO "input: PC-9801 bus mouse at %#x irq %d\n", PC98BM_BASE, pc98bm_irq);
+
+ return 0;
+}
+
+static void __exit pc98bm_exit(void)
+{
+ int i;
+
+ input_unregister_device(&pc98bm_dev);
+ for (i = 0; i <= 6; i += 2)
+ release_region(PC98BM_BASE + i, 1);
+
+ release_region(PC98BM_TIMER_PORT, 1);
+}
+
+module_init(pc98bm_init);
+module_exit(pc98bm_exit);
diff -urN linux/drivers/input/mouse/Kconfig linux98/drivers/input/mouse/Kconfig
--- linux/drivers/input/mouse/Kconfig Thu Oct 31 13:23:13 2002
+++ linux98/drivers/input/mouse/Kconfig Thu Oct 31 17:24:14 2002
@@ -119,3 +119,15 @@
The module will be called rpcmouse.o. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
+config MOUSE_PC9800
+ tristate "NEC PC-9800 busmouse"
+ depends on PC9800 && INPUT && INPUT_MOUSE && ISA
+ help
+ Say Y here if you have NEC PC-9801/PC-9821 computer and want its
+ native mouse supported.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called logibm.o. If you want to compile it as a
+ module, say M here and read <file.:Documentation/modules.txt>.
+
diff -urN linux/drivers/input/mouse/Makefile linux98/drivers/input/mouse/Makefile
--- linux/drivers/input/mouse/Makefile Sat Oct 19 13:01:17 2002
+++ linux98/drivers/input/mouse/Makefile Thu Oct 31 17:25:12 2002
@@ -10,6 +10,7 @@
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
+obj-$(CONFIG_MOUSE_PC9800) += 98busmouse.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
diff -urN linux/drivers/input/serio/Kconfig linux98/drivers/input/serio/Kconfig
--- linux/drivers/input/serio/Kconfig Thu Oct 31 13:23:13 2002
+++ linux98/drivers/input/serio/Kconfig Thu Oct 31 17:34:00 2002
@@ -103,3 +103,15 @@
tristate "Intel SA1111 keyboard controller"
depends on SA1111 && SERIO
+config SERIO_98KBD
+ tristate "NEC PC-9800 keyboard controller"
+ depends on PC9800 && SERIO
+ help
+ Say Y here if you have the NEC PC-9801/PC-9821 and want to use its
+ standard keyboard connected to its keyboard controller.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called rpckbd.o. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux/drivers/input/serio/Makefile linux98/drivers/input/serio/Makefile
--- linux/drivers/input/serio/Makefile Sat Oct 19 13:01:09 2002
+++ linux98/drivers/input/serio/Makefile Thu Oct 24 15:50:55 2002
@@ -17,6 +17,7 @@
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
+obj-$(CONFIG_SERIO_98KBD) += 98kbd-io.o
# The global Rules.make.
diff -urN linux/drivers/input/serio/98kbd-io.c linux98/drivers/input/serio/98kbd-io.c
--- linux/drivers/input/serio/98kbd-io.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/serio/98kbd-io.c Thu Oct 24 16:29:57 2002
@@ -0,0 +1,181 @@
+/*
+ * NEC PC-9801 keyboard controller driver for Linux
+ *
+ * Copyright (c) 1999-2002 Osamu Tomita <tomita@cinet.co.jp>
+ * Based on i8042.c written by Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/sched.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("NEC PC-9801 keyboard controller driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Names.
+ */
+
+#define KBD98_PHYS_DESC "isa0041/serio0"
+
+/*
+ * IRQs.
+ */
+
+#define KBD98_IRQ 1
+
+/*
+ * Register numbers.
+ */
+
+#define KBD98_COMMAND_REG 0x43
+#define KBD98_STATUS_REG 0x43
+#define KBD98_DATA_REG 0x41
+
+spinlock_t kbd98io_lock = SPIN_LOCK_UNLOCKED;
+
+static struct serio kbd98_port;
+extern struct pt_regs *kbd_pt_regs;
+
+static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/*
+ * kbd98_flush() flushes all data that may be in the keyboard buffers
+ */
+
+static int kbd98_flush(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&kbd98io_lock, flags);
+
+ while (inb(KBD98_STATUS_REG) & 0x02) /* RxRDY */
+ inb(KBD98_DATA_REG);
+
+ if (inb(KBD98_STATUS_REG) & 0x38)
+ printk("98kbd-io: Keyboard error!\n");
+
+ spin_unlock_irqrestore(&kbd98io_lock, flags);
+
+ return 0;
+}
+
+/*
+ * kbd98_write() sends a byte out through the keyboard interface.
+ */
+
+static int kbd98_write(struct serio *port, unsigned char c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&kbd98io_lock, flags);
+
+ outb(0, 0x5f); /* wait */
+ outb(0x17, KBD98_COMMAND_REG); /* enable send command */
+ outb(0, 0x5f); /* wait */
+ outb(c, KBD98_DATA_REG);
+ outb(0, 0x5f); /* wait */
+ outb(0x16, KBD98_COMMAND_REG); /* disable send command */
+ outb(0, 0x5f); /* wait */
+
+ spin_unlock_irqrestore(&kbd98io_lock, flags);
+
+ return 0;
+}
+
+/*
+ * kbd98_open() is called when a port is open by the higher layer.
+ * It allocates the interrupt and enables in in the chip.
+ */
+
+static int kbd98_open(struct serio *port)
+{
+ kbd98_flush();
+
+ if (request_irq(KBD98_IRQ, kbd98io_interrupt, 0, "kbd98", NULL)) {
+ printk(KERN_ERR "98kbd-io.c: Can't get irq %d for %s, unregistering the port.\n", KBD98_IRQ, "KBD");
+ serio_unregister_port(port);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void kbd98_close(struct serio *port)
+{
+ free_irq(KBD98_IRQ, NULL);
+
+ kbd98_flush();
+}
+
+/*
+ * Structures for registering the devices in the serio.c module.
+ */
+
+static struct serio kbd98_port =
+{
+ .type = SERIO_PC9800,
+ .write = kbd98_write,
+ .open = kbd98_open,
+ .close = kbd98_close,
+ .driver = NULL,
+ .name = "PC-9801 Kbd Port",
+ .phys = KBD98_PHYS_DESC,
+};
+
+/*
+ * kbd98io_interrupt() is the most important function in this driver -
+ * it handles the interrupts from keyboard, and sends incoming bytes
+ * to the upper layers.
+ */
+
+static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+ unsigned char data;
+
+#ifdef CONFIG_VT
+ kbd_pt_regs = regs;
+#endif
+
+ spin_lock_irqsave(&kbd98io_lock, flags);
+
+ data = inb(KBD98_DATA_REG);
+ spin_unlock_irqrestore(&kbd98io_lock, flags);
+ serio_interrupt(&kbd98_port, data, 0);
+
+}
+
+int __init kbd98io_init(void)
+{
+ serio_register_port(&kbd98_port);
+
+ printk(KERN_INFO "serio: PC-9801 %s port at %#lx,%#lx irq %d\n",
+ "KBD",
+ (unsigned long) KBD98_DATA_REG,
+ (unsigned long) KBD98_COMMAND_REG,
+ KBD98_IRQ);
+
+ return 0;
+}
+
+void __exit kbd98io_exit(void)
+{
+ serio_unregister_port(&kbd98_port);
+}
+
+module_init(kbd98io_init);
+module_exit(kbd98io_exit);
diff -urN linux/drivers/char/keyboard.c linux98/drivers/char/keyboard.c
--- linux/drivers/char/keyboard.c Sat Oct 19 13:01:49 2002
+++ linux98/drivers/char/keyboard.c Sun Oct 27 09:12:29 2002
@@ -58,7 +58,11 @@
* Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
* This seems a good reason to start with NumLock off.
*/
+#ifndef CONFIG_PC9800
#define KBD_DEFLEDS 0
+#else
+#define KBD_DEFLEDS (1 << VC_NUMLOCK)
+#endif
#endif
#ifndef KBD_DEFLOCK
diff -urN linux/include/linux/kbd_kern.h linux98/include/linux/kbd_kern.h
--- linux/include/linux/kbd_kern.h Sat Oct 19 13:02:28 2002
+++ linux98/include/linux/kbd_kern.h Sun Oct 27 10:23:23 2002
@@ -43,11 +43,12 @@
#define LED_SHOW_IOCTL 1 /* only change leds upon ioctl */
#define LED_SHOW_MEM 2 /* `heartbeat': peek into memory */
- unsigned char ledflagstate:3; /* flags, not lights */
- unsigned char default_ledflagstate:3;
+ unsigned char ledflagstate:4; /* flags, not lights */
+ unsigned char default_ledflagstate:4;
#define VC_SCROLLOCK 0 /* scroll-lock mode */
#define VC_NUMLOCK 1 /* numeric lock mode */
#define VC_CAPSLOCK 2 /* capslock mode */
+#define VC_KANALOCK 3 /* kanalock mode */
unsigned char kbdmode:2; /* one 2-bit value */
#define VC_XLATE 0 /* translate keycodes using keymap */
diff -urN linux/include/linux/keyboard.h linux98/include/linux/keyboard.h
--- linux/include/linux/keyboard.h Sat Oct 19 13:01:13 2002
+++ linux98/include/linux/keyboard.h Mon Oct 21 15:59:48 2002
@@ -9,6 +9,7 @@
#define KG_ALT 3
#define KG_ALTGR 1
#define KG_SHIFTL 4
+#define KG_KANASHIFT 4
#define KG_SHIFTR 5
#define KG_CTRLL 6
#define KG_CTRLR 7
diff -urN linux/include/linux/serio.h linux98/include/linux/serio.h
--- linux/include/linux/serio.h Sat Oct 19 13:01:58 2002
+++ linux98/include/linux/serio.h Thu Oct 24 09:39:09 2002
@@ -97,6 +97,7 @@
#define SERIO_8042 0x01000000UL
#define SERIO_RS232 0x02000000UL
#define SERIO_HIL_MLC 0x03000000UL
+#define SERIO_PC9800 0x04000000UL
#define SERIO_PROTO 0xFFUL
#define SERIO_MSC 0x01
[-- Attachment #3: 98kbd.patch --]
[-- Type: text/plain, Size: 2220 bytes --]
--- linux98-2.5.45-ac1/drivers/input/keyboard/98kbd.c Sun Oct 27 07:45:43 2002
+++ linux98-2.5.45-ac1/drivers/input/keyboard/98kbd.c Thu Nov 7 13:52:11 2002
@@ -87,7 +87,8 @@
#define KBD98_RET_ACK 0xfa
#define KBD98_RET_NAK 0xfc /* Command NACK, send the cmd again */
-#define KBD98_KEY_JIS_EMUL 254
+#define KBD98_KEY_JIS_EMUL 253
+#define KBD98_KEY_UNKNOWN 254
#define KBD98_KEY_NULL 255
static char *kbd98_name = "PC-9801 Keyboard";
@@ -101,6 +102,10 @@
unsigned char cmdcnt;
signed char ack;
unsigned char shift;
+ struct {
+ unsigned char scancode;
+ unsigned char keycode;
+ } emul;
struct jis_kbd_conv jis[16];
};
@@ -127,6 +132,12 @@
scancode = data & KBD98_KEY;
keycode = kbd98->keycode[scancode];
press = !(data & KBD98_RELEASE);
+ if (kbd98->emul.scancode != KBD98_KEY_UNKNOWN
+ && scancode != kbd98->emul.scancode) {
+ input_report_key(&kbd98->dev, kbd98->emul.keycode, 0);
+ kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
+ }
+
if (keycode == KEY_RIGHTSHIFT)
kbd98->shift = press;
@@ -154,13 +165,24 @@
if (keycode == KBD98_KEY_NULL)
return;
- if (kbd98->jis[i].emul[kbd98->shift].shift != kbd98->shift && press) {
- input_report_key(&kbd98->dev, KEY_RIGHTSHIFT, !(kbd98->shift));
+ if (press) {
+ kbd98->emul.scancode = scancode;
+ kbd98->emul.keycode = keycode;
+ if (kbd98->jis[i].emul[kbd98->shift].shift
+ != kbd98->shift)
+ input_report_key(&kbd98->dev,
+ KEY_RIGHTSHIFT,
+ !(kbd98->shift));
}
input_report_key(&kbd98->dev, keycode, press);
- if (kbd98->jis[i].emul[kbd98->shift].shift != kbd98->shift && !press) {
- input_report_key(&kbd98->dev, KEY_RIGHTSHIFT, kbd98->shift);
+ if (!press) {
+ if (kbd98->jis[i].emul[kbd98->shift].shift
+ != kbd98->shift)
+ input_report_key(&kbd98->dev,
+ KEY_RIGHTSHIFT,
+ kbd98->shift);
+ kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
}
input_sync(&kbd98->dev);
@@ -287,6 +309,7 @@
return;
memset(kbd98, 0, sizeof(struct kbd98));
+ kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
kbd98->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
kbd98->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_KANA);
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCHSET 11/17] support PC-9800 against 2.5.45-ac1 (kernel)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (9 preceding siblings ...)
2002-11-06 18:31 ` [PATCHSET 10/17] support PC-9800 against 2.5.45-ac1 (input) Osamu Tomita
@ 2002-11-06 18:36 ` Osamu Tomita
2002-11-06 18:42 ` [PATCHSET 12/17] support PC-9800 against 2.5.45-ac1 (parport) Osamu Tomita
` (5 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:36 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 197 bytes --]
This patch includes linux/kernel/* files changes.
diffstat:
kernel/dma.c | 3 +++
kernel/ksyms.c | 4 ++++
kernel/timer.c | 5 +++++
3 files changed, 12 insertions(+)
--
Osamu Tomita
[-- Attachment #2: kernel.patch --]
[-- Type: text/plain, Size: 1526 bytes --]
diff -urN linux/kernel/dma.c linux98/kernel/dma.c
--- linux/kernel/dma.c Sun Aug 11 10:41:22 2002
+++ linux98/kernel/dma.c Wed Aug 21 09:53:59 2002
@@ -9,6 +9,7 @@
* [It also happened to remove the sizeof(char *) == sizeof(int)
* assumption introduced because of those /proc/dma patches. -- Hennus]
*/
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -62,10 +63,12 @@
{ 0, 0 },
{ 0, 0 },
{ 0, 0 },
+#ifndef CONFIG_PC9800
{ 1, "cascade" },
{ 0, 0 },
{ 0, 0 },
{ 0, 0 }
+#endif
};
diff -urN linux/kernel/ksyms.c linux98/kernel/ksyms.c
--- linux/kernel/ksyms.c Tue Nov 5 10:16:25 2002
+++ linux98/kernel/ksyms.c Wed Nov 6 10:02:10 2002
@@ -602,5 +602,9 @@
EXPORT_SYMBOL(__per_cpu_offset);
#endif
+/* Whether PC-9800 architecture or not No:0 Yes:1 */
+int pc98 = 0;
+EXPORT_SYMBOL(pc98);
+
/* debug */
EXPORT_SYMBOL(dump_stack);
diff -urN linux/kernel/timer.c linux98/kernel/timer.c
--- linux/kernel/timer.c Thu Oct 31 13:23:44 2002
+++ linux98/kernel/timer.c Thu Oct 31 17:36:24 2002
@@ -400,8 +400,13 @@
/*
* Timekeeping variables
*/
+#ifndef CONFIG_PC9800
unsigned long tick_usec = TICK_USEC; /* ACTHZ period (usec) */
unsigned long tick_nsec = TICK_NSEC(TICK_USEC); /* USER_HZ period (nsec) */
+#else
+extern unsigned long tick_usec; /* ACTHZ period (usec) */
+extern unsigned long tick_nsec; /* USER_HZ period (nsec) */
+#endif
/* The current time */
struct timespec xtime __attribute__ ((aligned (16)));
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 12/17] support PC-9800 against 2.5.45-ac1 (parport)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (10 preceding siblings ...)
2002-11-06 18:36 ` [PATCHSET 11/17] support PC-9800 against 2.5.45-ac1 (kernel) Osamu Tomita
@ 2002-11-06 18:42 ` Osamu Tomita
2002-11-06 18:48 ` [PATCHSET 13/17] support PC-9800 against 2.5.45-ac1 (PCI) Osamu Tomita
` (4 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:42 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 345 bytes --]
This patch adds support for stardard parallel port for PC-9800.
diffstat:
drivers/char/Kconfig | 21 +
drivers/char/lp_old98.c | 577 +++++++++++++++++++++++++++++++++++++++++++ drivers/parport/parport_pc.c | 68 ++++-
include/linux/parport_pc.h | 10
4 files changed, 671 insertions(+), 5 deletions(-)
--
Osamu Tomita
[-- Attachment #2: parport.patch --]
[-- Type: text/plain, Size: 20312 bytes --]
diff -urN linux/drivers/parport/parport_pc.c linux98/drivers/parport/parport_pc.c
--- linux/drivers/parport/parport_pc.c Sat Oct 19 13:01:52 2002
+++ linux98/drivers/parport/parport_pc.c Sat Oct 26 17:01:09 2002
@@ -85,6 +85,8 @@
#define DPRINTK(stuff...)
#endif
+/* Indicates PC-9800 architecture No:0 Yes:1 */
+extern int pc98;
#define NR_SUPERIOS 3
static struct superio_struct { /* For Super-IO chips autodetection */
@@ -332,7 +334,10 @@
unsigned char parport_pc_read_status(struct parport *p)
{
- return inb (STATUS (p));
+ if (pc98 && p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+ return inb (STATUS (p));
}
void parport_pc_disable_irq(struct parport *p)
@@ -1644,6 +1649,8 @@
{
unsigned char r, w;
+ if (pc98 && pb->base == 0x40)
+ return PARPORT_MODE_PCSPP;
/*
* first clear an eventually pending EPP timeout
* I (sailer@ife.ee.ethz.ch) have an SMSC chipset
@@ -1777,6 +1784,9 @@
{
int ok = 0;
+ if (pc98 && pb->base == 0x40)
+ return 0; /* never support */
+
clear_epp_timeout(pb);
/* try to tri-state the buffer */
@@ -1908,6 +1918,9 @@
config & 0x80 ? "Level" : "Pulses");
configb = inb (CONFIGB (pb));
+ if (pc98 && (CONFIGB(pb) == 0x14d) && ((configb & 0x38) == 0x30))
+ configb = (configb & ~0x38) | 0x28; /* IRQ 14 */
+
printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
pb->base, config, configb);
printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
@@ -2048,6 +2061,9 @@
ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ if (pc98 && (CONFIGB(pb) == 0x14d) && (intrLine == 6))
+ intrLine = 5; /* IRQ 14 */
+
irq = lookup[intrLine];
ECR_WRITE (pb, oecr);
@@ -2212,7 +2228,14 @@
struct parport tmp;
struct parport *p = &tmp;
int probedirq = PARPORT_IRQ_NONE;
- if (check_region(base, 3)) return NULL;
+ if (pc98 && base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ if (check_region(base + i, 1)) return NULL;
+ } else {
+ if (check_region(base, 3)) return NULL;
+ }
+
priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
if (!priv) {
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
@@ -2245,7 +2268,7 @@
if (base_hi && !check_region(base_hi,3))
parport_ECR_present(p);
- if (base != 0x3bc) {
+ if (!pc98 && base != 0x3bc) {
if (!check_region(base+0x3, 5)) {
if (!parport_EPP_supported(p))
parport_ECPEPP_supported(p);
@@ -2343,7 +2366,12 @@
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
parport_proc_register(p);
- request_region (p->base, 3, p->name);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ request_region(p->base + i, 1, p->name);
+ } else
+ request_region (p->base, 3, p->name);
if (p->size > 3)
request_region (p->base + 3, p->size - 3, p->name);
if (p->modes & PARPORT_MODE_ECP)
@@ -2413,7 +2441,13 @@
free_dma(p->dma);
if (p->irq != PARPORT_IRQ_NONE)
free_irq(p->irq, p);
- release_region(p->base, 3);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ release_region(p->base + i, 1);
+ } else
+ release_region(p->base, 3);
+
if (p->size > 3)
release_region(p->base + 3, p->size - 3);
if (p->modes & PARPORT_MODE_ECP)
@@ -2994,6 +3028,30 @@
{
int count = 0;
+ if (pc98) {
+ /* Set default resource settings for old style parport */
+ int base = 0x40;
+ int base_hi = 0;
+ int irq = PARPORT_IRQ_NONE;
+ int dma = PARPORT_DMA_NONE;
+
+ /* Check PC9800 old style parport */
+ outb(inb(0x149) & ~0x10, 0x149); /* disable IEEE1284 */
+ if (!(inb(0x149) & 0x10)) { /* IEEE1284 disabled ? */
+ outb(inb(0x149) | 0x10, 0x149); /* enable IEEE1284 */
+ if (inb(0x149) & 0x10) { /* IEEE1284 enabled ? */
+ /* Set default settings for IEEE1284 parport */
+ base = 0x140;
+ base_hi = 0x14c;
+ irq = 14;
+ /* dma = PARPORT_DMA_NONE; */
+ }
+ }
+
+ if (parport_pc_probe_port(base, base_hi, irq, dma, NULL))
+ count++;
+ }
+
if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
count++;
if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
diff -urN linux/include/linux/parport_pc.h linux98/include/linux/parport_pc.h
--- linux/include/linux/parport_pc.h Tue Jun 12 11:15:27 2001
+++ linux98/include/linux/parport_pc.h Sun Aug 19 14:13:09 2001
@@ -119,6 +119,11 @@
#endif
ctr = (ctr & ~mask) ^ val;
ctr &= priv->ctr_writable; /* only write writable bits. */
+#ifdef CONFIG_PC9800
+ if (p->base == 0x40 && ((priv->ctr) ^ ctr) & 0x01)
+ outb(0x0e | ((ctr & 0x01) ^ 0x01), 0x46);
+ else
+#endif /* CONFIG_PC9800 */
outb (ctr, CONTROL (p));
priv->ctr = ctr; /* Update soft copy */
return ctr;
@@ -191,6 +196,11 @@
extern __inline__ unsigned char parport_pc_read_status(struct parport *p)
{
+#ifdef CONFIG_PC9800
+ if (p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+#endif /* CONFIG_PC9800 */
return inb(STATUS(p));
}
diff -urN linux/drivers/char/Kconfig linux98/drivers/char/Kconfig
--- linux/drivers/char/Kconfig Thu Oct 31 13:23:11 2002
+++ linux98/drivers/char/Kconfig Thu Oct 31 19:17:02 2002
@@ -574,6 +574,17 @@
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
+config PC9800_OLDLP
+ tristate "NEC PC-9800 old-style printer port support"
+ depends on PC9800 && !PARPORT
+ ---help---
+ If you intend to attach a printer to the parallel port of NEC PC-9801
+ /PC-9821 with OLD compatibility mode, Say Y.
+
+config PC9800_OLDLP_CONSOLE
+ bool "Support for console on line printer"
+ depends on PC9800_OLDLP
+
source "drivers/i2c/Kconfig"
@@ -1053,6 +1064,7 @@
config RTC
tristate "Enhanced Real Time Clock Support"
+ depends on !PC9800
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -1111,6 +1123,15 @@
bool "EFI Real Time Clock Services"
depends on IA64
+config RTC98
+ tristate "NEC PC-9800 Real Time Clock Support"
+ depends on PC9800
+ default y
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+
config H8
bool "Tadpole ANA H8 Support (OBSOLETE)"
depends on OBSOLETE && ALPHA_BOOK1
diff -urN linux/drivers/char/lp_old98.c linux98/drivers/char/lp_old98.c
--- linux/drivers/char/lp_old98.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/lp_old98.c Sat Oct 26 17:13:23 2002
@@ -0,0 +1,577 @@
+/*
+ * linux/drivers/char/lp_old98.c
+ *
+ * printer port driver for ancient PC-9800s with no bidirectional port support
+ *
+ * Copyright (C) 1998,99 Kousuke Takai <tak@kmc.kyoto-u.ac.jp>,
+ * Kyoto University Microcomputer Club
+ *
+ * This driver is based on and has compatibility with `lp.c',
+ * generic PC printer port driver.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/malloc.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/version.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#if !defined(CONFIG_PC9800) && !defined(CONFIG_PC98)
+#error This driver works only for NEC PC-9800 series
+#endif
+
+#if LINUX_VERSION_CODE < 0x20200
+# define LP_STATS
+#endif
+
+#if LINUX_VERSION_CODE >= 0x2030b
+# define CONFIG_RESOURCE98
+#endif
+
+#include <linux/lp.h>
+
+/*
+ * I/O port numbers
+ */
+#define LP_PORT_DATA 0x40
+#define LP_PORT_STATUS (LP_PORT_DATA+2)
+#define LP_PORT_STROBE (LP_PORT_DATA+4)
+#define LP_PORT_CONTROL (LP_PORT_DATA+6)
+
+#define LP_PORT_H98MODE 0x0448
+#define LP_PORT_EXTMODE 0x0149
+
+/*
+ * bit mask for I/O
+ */
+#define LP_MASK_nBUSY (1 << 2)
+#define LP_MASK_nSTROBE (1 << 7)
+
+#define LP_CONTROL_ASSERT_STROBE (0x0e)
+#define LP_CONTROL_NEGATE_STROBE (0x0f)
+
+/*
+ * Acceptable maximum value for non-privileged user for LPCHARS ioctl.
+ */
+#define LP_CHARS_NOPRIV_MAX 65535
+
+#define DC1 '\x11'
+#define DC3 '\x13'
+
+/* PC-9800s have at least and at most one old-style printer port. */
+static struct lp_struct lp = {
+ /* Following `TAG: INITIALIZER' notations are GNU CC extension. */
+ flags: LP_EXIST | LP_ABORTOPEN,
+ chars: LP_INIT_CHAR,
+ time: LP_INIT_TIME,
+ wait: LP_INIT_WAIT,
+};
+
+static int dc1_check = 1000;
+
+#undef LP_OLD98_DEBUG
+
+#ifndef __udelay_val
+# define __udelay_val current_cpu_data.loops_per_sec
+#endif
+
+static inline void nanodelay(unsigned long nanosecs) /* Evil ? */
+{
+ if( nanosecs ) {
+ nanosecs *= (unsigned long)((1ULL << 40) / 1000000000ULL);
+ __asm__("mul%L2 %2"
+ : "=d"(nanosecs) : "a"(nanosecs), "g"(__udelay_val));
+ __delay(nanosecs >> 8);
+ }
+}
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+static struct console lp_old98_console; /* defined later */
+static __typeof__(lp_old98_console.flags) saved_console_flags;
+#endif
+
+static DECLARE_WAIT_QUEUE_HEAD (lp_old98_waitq);
+
+static void lp_old98_timer_function(unsigned long data);
+
+static void lp_old98_timer_function(unsigned long data)
+{
+ if (inb(LP_PORT_STATUS) & LP_MASK_nBUSY)
+ wake_up_interruptible(&lp_old98_waitq);
+ else {
+ struct timer_list *t = (struct timer_list *) data;
+
+ t->expires = jiffies + 1;
+ add_timer(t);
+ }
+}
+
+static inline int
+lp_old98_wait_ready(void)
+{
+ struct timer_list timer;
+
+ init_timer(&timer);
+ timer.function = lp_old98_timer_function;
+ timer.expires = jiffies + 1;
+ timer.data = (unsigned long) &timer;
+ add_timer(&timer);
+ interruptible_sleep_on(&lp_old98_waitq);
+ del_timer(&timer);
+ return signal_pending(current);
+}
+
+static inline int lp_old98_char(char lpchar)
+{
+ unsigned long count = 0;
+#ifdef LP_STATS
+ int tmp;
+#endif
+
+ while( !(inb(LP_PORT_STATUS) & LP_MASK_nBUSY) ) {
+ count++;
+ if (count >= lp.chars)
+ return 0;
+ }
+
+ outb(lpchar, LP_PORT_DATA);
+
+#ifdef LP_STATS
+ /*
+ * Update lp statsistics here (and between next two outb()'s).
+ * Time to compute it is part of storobe delay.
+ */
+ if( count > lp.stats.maxwait ) {
+#ifdef LP_OLD98_DEBUG
+ printk(KERN_DEBUG "lp_old98: success after %d counts.\n",
+ count);
+#endif
+ lp.stats.maxwait = count;
+ }
+ count *= 256;
+ tmp = count - lp.stats.meanwait;
+ if( tmp < 0 )
+ tmp = -tmp;
+#endif
+ nanodelay(lp.wait);
+
+ /* negate PSTB# (activate strobe) */
+ outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+
+#ifdef LP_STATS
+ lp.stats.meanwait = (255 * lp.stats.meanwait + count + 128) / 256;
+ lp.stats.mdev = (127 * lp.stats.mdev + tmp + 64) / 128;
+ lp.stats.chars++;
+#endif
+
+ nanodelay(lp.wait);
+
+ /* assert PSTB# (deactivate strobe) */
+ outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+
+ return 1;
+}
+
+#if LINUX_VERSION_CODE < 0x20200
+static long lp_old98_write(struct inode * inode, struct file * file,
+ const char * buf, unsigned long count)
+#else
+static ssize_t lp_old98_write(struct file * file,
+ const char * buf, size_t count,
+ loff_t *dummy)
+#endif
+{
+ unsigned long total_bytes_written = 0;
+
+ if (!access_ok(VERIFY_READ, buf, count))
+ return -EFAULT;
+
+#ifdef LP_STATS
+ if( jiffies - lp.lastcall > lp.time )
+ lp.runchars = 0;
+ lp.lastcall = jiffies;
+#endif
+
+ do {
+ unsigned long bytes_written = 0;
+ unsigned long copy_size
+ = (count < LP_BUFFER_SIZE ? count : LP_BUFFER_SIZE);
+
+ if (__copy_from_user(lp.lp_buffer, buf, copy_size))
+ return -EFAULT;
+
+ while( bytes_written < copy_size ) {
+ if( lp_old98_char(lp.lp_buffer[bytes_written]) )
+ bytes_written++;
+ else {
+#ifdef LP_STATS
+ int rc = lp.runchars + bytes_written;
+
+ if( rc > lp.stats.maxrun )
+ lp.stats.maxrun = rc;
+
+ lp.stats.sleeps++;
+#endif
+#ifdef LP_OLD98_DEBUG
+ printk(KERN_DEBUG
+ "lp_old98: sleeping at %d characters"
+ " for %d jiffies\n",
+ lp.runchars, lp.time);
+ lp.runchars = 0;
+#endif
+ if (lp_old98_wait_ready())
+ return ((total_bytes_written
+ + bytes_written)
+ ? : -EINTR);
+ }
+ }
+ total_bytes_written += bytes_written;
+ buf += bytes_written;
+#ifdef LP_STATS
+ lp.runchars += bytes_written;
+#endif
+ count -= bytes_written;
+ } while( count > 0 );
+
+ return total_bytes_written;
+}
+
+static long long lp_old98_llseek(struct file * file,
+ long long offset, int whence)
+{
+ return -ESPIPE; /* cannot seek like pipe */
+}
+
+static int lp_old98_open(struct inode * inode, struct file * file)
+{
+ if( MINOR(inode->i_rdev) != 0 )
+ return -ENXIO;
+ if( lp.flags & LP_BUSY )
+ return -EBUSY;
+
+ if ((lp.lp_buffer = kmalloc(LP_BUFFER_SIZE, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ if (dc1_check && (lp.flags & LP_ABORTOPEN)
+ && !(file->f_flags & O_NONBLOCK) ) {
+ /*
+ * Check whether printer is on-line.
+ * PC-9800's old style port have only BUSY# as status input,
+ * so that it is impossible to distinguish that the printer is
+ * ready and that the printer is off-line or not connected
+ * (in both case BUSY# is in the same state). So:
+ *
+ * (1) output DC1 (0x11) to printer port and do strobe.
+ * (2) watch BUSY# line for a while. If BUSY# is pulled
+ * down, the printer will be ready. Otherwise,
+ * it will be off-line (or not connected, or power-off,
+ * ...).
+ *
+ * The source of this procedure:
+ * Terumasa KODAKA, Kazufumi SHIMIZU, Yu HAYAMI:
+ * `PC-9801 Super Technique', Ascii, 1992.
+ */
+ int count;
+ unsigned long eflags;
+
+ save_flags(eflags);
+ cli(); /* interrupts while check is fairly bad */
+
+ if (!lp_old98_char(DC1)) {
+ restore_flags(eflags);
+ return -EBUSY;
+ }
+ count = (unsigned int)dc1_check > 10000 ? 10000 : dc1_check;
+ while( inb(LP_PORT_STATUS) & LP_MASK_nBUSY )
+ if( --count == 0 ) {
+ restore_flags(eflags);
+ return -ENODEV;
+ }
+ restore_flags(eflags);
+ }
+
+ lp.flags |= LP_BUSY;
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ saved_console_flags = lp_old98_console.flags;
+ lp_old98_console.flags &= ~CON_ENABLED;
+#endif
+
+ MOD_INC_USE_COUNT;
+ return 0;
+}
+
+static int lp_old98_release(struct inode * inode, struct file * file)
+{
+ kfree(lp.lp_buffer);
+ lp.lp_buffer = NULL;
+ lp.flags &= ~LP_BUSY;
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ lp_old98_console.flags = saved_console_flags;
+#endif
+ MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+static int lp_old98_init_device(void)
+{
+ unsigned char data;
+
+ if( (data = inb(LP_PORT_EXTMODE)) != 0xFF && (data & 0x10) ) {
+ printk(KERN_INFO
+ "lp_old98: shutting down extended parallel port mode...\n");
+ outb(data & ~0x10, LP_PORT_EXTMODE);
+ }
+#ifdef PC98_HW_H98
+ if( (pc98_hw_flags & PC98_HW_H98)
+ && ((data = inb(LP_PORT_H98MODE)) & 0x01) ) {
+ printk(KERN_INFO
+ "lp_old98: shutting down H98 full centronics mode...\n");
+ outb(data & ~0x01, LP_PORT_H98MODE);
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Many use of `put_user' macro enlarge code size...
+ */
+static /* not inline */ int lp_old98_put_user(int val, int *addr)
+{
+ return put_user(val, addr);
+}
+
+static int lp_old98_ioctl(struct inode *inode, struct file *file,
+ unsigned int command, unsigned long arg)
+{
+ int retval = 0;
+
+ switch ( command ) {
+ case LPTIME:
+ lp.time = arg * HZ/100;
+ break;
+ case LPCHAR:
+ lp.chars = arg;
+ break;
+ case LPABORT:
+ if( arg )
+ lp.flags |= LP_ABORT;
+ else
+ lp.flags &= ~LP_ABORT;
+ break;
+ case LPABORTOPEN:
+ if( arg )
+ lp.flags |= LP_ABORTOPEN;
+ else
+ lp.flags &= ~LP_ABORTOPEN;
+ break;
+ case LPCAREFUL:
+ /* do nothing */
+ break;
+ case LPWAIT:
+ lp.wait = arg;
+ break;
+ case LPGETIRQ:
+ retval = lp_old98_put_user(0, (int *)arg);
+ break;
+ case LPGETSTATUS:
+ /*
+ * convert PC-9800's status to IBM PC's one, so that tunelp(8)
+ * works in the same way on this driver.
+ */
+ retval = lp_old98_put_user((inb(LP_PORT_STATUS)
+ & LP_MASK_nBUSY)
+ ? (LP_PBUSY | LP_PERRORP)
+ : LP_PERRORP,
+ (int *)arg);
+ break;
+ case LPRESET:
+ retval = lp_old98_init_device();
+ break;
+#ifdef LP_STATS
+ case LPGETSTATS:
+ if( copy_to_user((struct lp_stats *)arg, &lp.stats,
+ sizeof(struct lp_stats)) )
+ retval = -EFAULT;
+ else if (suser())
+ memset(&lp.stats, 0, sizeof(struct lp_stats));
+ break;
+#endif
+ case LPGETFLAGS:
+ retval = lp_old98_put_user(lp.flags, (int *)arg);
+ break;
+ case LPSETIRQ:
+ default:
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+static struct file_operations lp_old98_fops = {
+ owner: THIS_MODULE,
+ llseek: lp_old98_llseek,
+ read: NULL,
+ write: lp_old98_write,
+ ioctl: lp_old98_ioctl,
+ open: lp_old98_open,
+ release:lp_old98_release,
+};
+\f
+/*
+ * Support for console on lp_old98
+ */
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+
+static inline void io_delay(void)
+{
+ unsigned char dummy; /* actually not output */
+
+ asm volatile ("out%B0 %0,%1" : "=a"(dummy) : "N"(0x5f));
+}
+
+static void lp_old98_console_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ int i;
+ static unsigned int timeout_run = 0;
+
+ while (count) {
+ /* wait approx 1.2 seconds */
+ for (i = 2000000;
+ !(inb(LP_PORT_STATUS) & LP_MASK_nBUSY);
+ io_delay())
+ if (!--i) {
+ if (++timeout_run >= 10)
+ /* disable forever... */
+ console->flags &= ~CON_ENABLED;
+ return;
+ }
+
+ timeout_run = 0;
+
+ if (*s == '\n') {
+ outb('\r', LP_PORT_DATA);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+ for (i = 1000000;
+ !(inb(LP_PORT_STATUS) & LP_MASK_nBUSY);
+ io_delay())
+ if (!--i)
+ return;
+ }
+
+ outb(*s++, LP_PORT_DATA);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+
+ --count;
+ }
+}
+
+static kdev_t lp_old98_console_device(struct console *console)
+{
+ return MKDEV(LP_MAJOR, 0);
+}
+
+static struct console lp_old98_console = {
+ name: "lp_old98",
+ write: lp_old98_console_write,
+ device: lp_old98_console_device,
+ flags: CON_PRINTBUFFER,
+ index: -1,
+};
+
+#endif /* console on lp_old98 */
+\f
+#ifdef MODULE
+#define lp_old98_init init_module
+#endif
+
+int __init lp_old98_init(void)
+{
+ if (check_region(LP_PORT_DATA, 1) || check_region(LP_PORT_STATUS, 1)
+ || check_region(LP_PORT_STROBE, 1)
+#ifdef PC98_HW_H98
+ || ((pc98_hw_flags & PC98_HW_H98)
+ && check_region(LP_PORT_H98MODE, 1))
+#endif
+ || check_region(LP_PORT_EXTMODE, 1)) {
+ printk(KERN_ERR
+ "lp_old98: I/O ports already occupied, giving up.\n");
+ return -EBUSY;
+ }
+ if (register_chrdev(LP_MAJOR, "lp", &lp_old98_fops)) {
+ printk(KERN_ERR "lp_old98: unable to get major %d\n",
+ LP_MAJOR);
+ return -EBUSY;
+ }
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ register_console(&lp_old98_console);
+ printk(KERN_INFO "lp_old98: console ready\n");
+#endif
+
+ request_region(LP_PORT_DATA, 1, "lp_old98");
+ request_region(LP_PORT_STATUS, 1, "lp_old98");
+ request_region(LP_PORT_STROBE, 1, "lp_old98");
+
+ /*
+ * rest are not needed by this driver,
+ * but for locking out other printer drivers...
+ */
+#ifdef PC98_HW_H98
+ if( pc98_hw_flags & PC98_HW_H98 )
+ request_region(LP_PORT_H98MODE, 1, "lp_old98");
+#endif
+ request_region(LP_PORT_EXTMODE, 1, "lp_old98");
+ lp_old98_init_device();
+
+ return 0;
+}
+
+#ifdef MODULE
+void cleanup_module(void)
+{
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ unregister_console(&lp_old98_console);
+#endif
+ unregister_chrdev(LP_MAJOR, "lp");
+
+ release_region(LP_PORT_DATA, 1);
+ release_region(LP_PORT_STATUS, 1);
+ release_region(LP_PORT_STROBE, 1);
+#ifdef PC98_HW_H98
+ if( pc98_hw_flags & PC98_HW_H98 )
+ release_region(LP_PORT_H98MODE, 1);
+#endif
+ release_region(LP_PORT_EXTMODE, 1);
+}
+
+MODULE_PARM(dc1_check, "1i");
+MODULE_AUTHOR("Kousuke Takai <tak@kmc.kyoto-u.ac.jp>");
+
+#endif
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 13/17] support PC-9800 against 2.5.45-ac1 (PCI)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (11 preceding siblings ...)
2002-11-06 18:42 ` [PATCHSET 12/17] support PC-9800 against 2.5.45-ac1 (parport) Osamu Tomita
@ 2002-11-06 18:48 ` Osamu Tomita
2002-11-06 18:50 ` [PATCHSET 14/17] support PC-9800 against 2.5.45-ac1 (PNP) Osamu Tomita
` (3 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:48 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 274 bytes --]
This patch includes PCI related files.
diffstat:
arch/i386/pci/irq.c | 27 +++++++++++++++++++++++++++
drivers/pci/quirks.c | 7 +++++++
drivers/pcmcia/yenta.c | 6 ++++++
include/asm-i386/pci.h | 4 ++++
4 files changed, 44 insertions(+)
--
Osamu Tomita
[-- Attachment #2: pci.patch --]
[-- Type: text/plain, Size: 3980 bytes --]
diff -urN linux/arch/i386/pci/irq.c linux98/arch/i386/pci/irq.c
--- linux/arch/i386/pci/irq.c Sat Oct 12 13:22:46 2002
+++ linux98/arch/i386/pci/irq.c Sat Oct 12 14:18:52 2002
@@ -5,6 +5,7 @@
*/
#include <linux/config.h>
+#include <linux/pci_ids.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -25,6 +26,7 @@
static struct irq_routing_table *pirq_table;
+#ifndef CONFIG_PC9800
/*
* Never use: 0, 1, 2 (timer, keyboard, and cascade)
* Avoid using: 13, 14 and 15 (FP error and IDE).
@@ -36,6 +38,20 @@
1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000,
0, 0, 0, 0, 1000, 100000, 100000, 100000
};
+#else
+/*
+ * Never use: 0, 1, 2, 7 (timer, keyboard, CRT VSYNC and cascade)
+ * Avoid using: 8, 9 and 15 (FP error and IDE).
+ * Penalize: 4, 5, 11, 12, 13, 14 (known ISA uses: serial, floppy, sound, mouse
+ * and parallel)
+ */
+unsigned int pcibios_irq_mask = 0xff78;
+
+static int pirq_penalty[16] = {
+ 1000000, 1000000, 1000000, 0, 1000, 1000, 0, 1000000,
+ 100000, 100000, 0, 1000, 1000, 1000, 1000, 100000
+};
+#endif
struct irq_router {
char *name;
@@ -612,6 +628,17 @@
r->set(pirq_router_dev, dev, pirq, 11);
}
+#ifdef CONFIG_PC9800
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
+ if (pci_find_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82439TX, NULL) != NULL) {
+ if (mask & 0x0040) {
+ mask &= 0x0040; /* assign IRQ 6 only */
+ printk("pci-irq: Use IRQ6 for CardBus controller\n");
+ }
+ }
+ }
+#endif
/*
* Find the best IRQ to assign: use the one
* reported by the device if possible.
diff -urN linux/drivers/pcmcia/yenta.c linux98/drivers/pcmcia/yenta.c
--- linux/drivers/pcmcia/yenta.c Sat Oct 12 13:22:10 2002
+++ linux98/drivers/pcmcia/yenta.c Sun Oct 13 17:29:24 2002
@@ -3,6 +3,7 @@
*
* (C) Copyright 1999, 2000 Linus Torvalds
*/
+#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/sched.h>
@@ -505,6 +506,7 @@
add_timer(&socket->poll_timer);
}
+#ifndef CONFIG_PC9800
/*
* Only probe "regular" interrupts, don't
* touch dangerous spots like the mouse irq,
@@ -515,6 +517,10 @@
* Default to 11, 10, 9, 7, 6, 5, 4, 3.
*/
static u32 isa_interrupts = 0x0ef8;
+#else
+/* Default to 12, 10, 6, 5, 3. */
+static u32 isa_interrupts = 0x1468;
+#endif
static unsigned int yenta_probe_irq(pci_socket_t *socket, u32 isa_irq_mask)
{
diff -urN linux/drivers/pci/quirks.c linux98/drivers/pci/quirks.c
--- linux/drivers/pci/quirks.c Tue Sep 10 02:35:00 2002
+++ linux98/drivers/pci/quirks.c Tue Sep 10 09:07:50 2002
@@ -54,7 +54,11 @@
{
if (!isa_dma_bridge_buggy) {
isa_dma_bridge_buggy=1;
+#ifndef CONFIG_PC9800
printk(KERN_INFO "Activating ISA DMA hang workarounds.\n");
+#else
+ printk(KERN_INFO "Activating C-bus DMA hang workarounds.\n");
+#endif
}
}
@@ -491,6 +495,9 @@
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs },
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs },
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs },
+#ifdef CONFIG_PC9800
+ { PCI_FIXUP_FINAL, PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs },
+#endif
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M },
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton },
diff -urN linux/include/asm-i386/pci.h linux98/include/asm-i386/pci.h
--- linux/include/asm-i386/pci.h Sun Jun 9 14:29:24 2002
+++ linux98/include/asm-i386/pci.h Mon Jun 10 20:49:15 2002
@@ -17,7 +17,11 @@
#endif
extern unsigned long pci_mem_start;
+#ifndef CONFIG_PC9800
#define PCIBIOS_MIN_IO 0x1000
+#else
+#define PCIBIOS_MIN_IO 0x4000
+#endif
#define PCIBIOS_MIN_MEM (pci_mem_start)
void pcibios_config_init(void);
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 14/17] support PC-9800 against 2.5.45-ac1 (PNP)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (12 preceding siblings ...)
2002-11-06 18:48 ` [PATCHSET 13/17] support PC-9800 against 2.5.45-ac1 (PCI) Osamu Tomita
@ 2002-11-06 18:50 ` Osamu Tomita
2002-11-06 18:53 ` [PATCHSET 15/17] support PC-9800 against 2.5.45-ac1 (SCSI) Osamu Tomita
` (2 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:50 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 154 bytes --]
This patch adds legacy bus PNP support for PC-9800.
diffstat:
drivers/pnp/isapnp/core.c | 5 +++++
1 files changed, 5 insertions(+)
--
Osamu Tomita
[-- Attachment #2: pnp.patch --]
[-- Type: text/plain, Size: 494 bytes --]
diff -urN linux/drivers/pnp/isapnp/core.c linux98/drivers/pnp/isapnp/core.c
--- linux/drivers/pnp/isapnp/core.c Sat Oct 19 13:01:56 2002
+++ linux98/drivers/pnp/isapnp/core.c Sat Oct 19 15:37:24 2002
@@ -75,8 +75,13 @@
MODULE_PARM_DESC(isapnp_verbose, "ISA Plug & Play verbose mode");
MODULE_LICENSE("GPL");
+#ifndef CONFIG_PC9800
#define _PIDXR 0x279
#define _PNPWRP 0xa79
+#else
+#define _PIDXR 0x259
+#define _PNPWRP 0xa59
+#endif
/* short tags */
#define _STAG_PNPVERNO 0x01
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 15/17] support PC-9800 against 2.5.45-ac1 (SCSI)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (13 preceding siblings ...)
2002-11-06 18:50 ` [PATCHSET 14/17] support PC-9800 against 2.5.45-ac1 (PNP) Osamu Tomita
@ 2002-11-06 18:53 ` Osamu Tomita
2002-11-06 18:56 ` [PATCHSET 16/17] support PC-9800 against 2.5.45-ac1 (serial) Osamu Tomita
2002-11-06 18:58 ` [PATCHSET 17/17] support PC-9800 against 2.5.45-ac1 (SMP) Osamu Tomita
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:53 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 62 bytes --]
This patch adds SCSI HA support for PC-9800.
--
Osamu Tomita
[-- Attachment #2: scsi.patch --]
[-- Type: text/plain, Size: 23352 bytes --]
diff -urN linux/drivers/scsi/Kconfig linux98/drivers/scsi/Kconfig
--- linux/drivers/scsi/Kconfig Thu Oct 31 13:23:25 2002
+++ linux98/drivers/scsi/Kconfig Thu Oct 31 19:29:18 2002
@@ -1746,6 +1746,13 @@
see the picture at
<http://amiga.multigraph.com/photos/oktagon.html>.
+config SCSI_PC980155
+ tristate "NEC PC-9801-55 SCSI support"
+ depends on PC9800 && SCSI
+ help
+ If you have the NEC PC-9801-55 SCSI interface card or compatibles
+ for NEC PC-9801/PC-9821, say Y.
+
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
endmenu
diff -urN linux/drivers/scsi/Makefile linux98/drivers/scsi/Makefile
--- linux/drivers/scsi/Makefile Sat Oct 19 13:02:28 2002
+++ linux98/drivers/scsi/Makefile Tue Oct 29 15:45:44 2002
@@ -18,7 +18,7 @@
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
-export-objs := scsi_syms.o 53c700.o
+export-objs := scsi_syms.o 53c700.o wd33c93.o
subdir-$(CONFIG_PCMCIA) += pcmcia
@@ -31,6 +31,7 @@
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
+obj-$(CONFIG_SCSI_PC980155) += pc980155.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
diff -urN linux/drivers/scsi/pc980155.c linux98/drivers/scsi/pc980155.c
--- linux/drivers/scsi/pc980155.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/scsi/pc980155.c Sun Feb 3 12:08:14 2002
@@ -0,0 +1,262 @@
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/blk.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/module.h>
+
+#include "scsi.h"
+#include "hosts.h"
+#include "wd33c93.h"
+#include "pc980155.h"
+#include "pc980155regs.h"
+
+#define DEBUG
+
+#include<linux/stat.h>
+
+static inline void __print_debug_info(unsigned int);
+static inline void __print_debug_info(unsigned int a){}
+#define print_debug_info() __print_debug_info(base_io);
+
+#define NR_BASE_IOS 4
+static int nr_base_ios = NR_BASE_IOS;
+static unsigned int base_ios[NR_BASE_IOS] = {0xcc0, 0xcd0, 0xce0, 0xcf0};
+static unsigned int SASR;
+static unsigned int SCMD;
+static wd33c93_regs regs = {&SASR, &SCMD};
+
+static struct Scsi_Host *pc980155_host = NULL;
+
+static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp);
+
+inline void pc980155_dma_enable(unsigned int base_io){
+ outb(0x01, REG_CWRITE);
+ WAIT();
+}
+inline void pc980155_dma_disable(unsigned int base_io){
+ outb(0x02, REG_CWRITE);
+ WAIT();
+}
+
+
+static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp)
+{
+ wd33c93_intr(pc980155_host);
+}
+
+static int dma_setup(Scsi_Cmnd *sc, int dir_in){
+ /*
+ * sc->SCp.this_residual : transfer count
+ * sc->SCp.ptr : distination address (virtual address)
+ * dir_in : data direction (DATA_OUT_DIR:0 or DATA_IN_DIR:1)
+ *
+ * if success return 0
+ */
+
+ /*
+ * DMA WRITE MODE
+ * bit 7,6 01b single mode (this mode only)
+ * bit 5 inc/dec (default:0 = inc)
+ * bit 4 auto initialize (normaly:0 = off)
+ * bit 3,2 01b memory -> io
+ * 10b io -> memory
+ * 00b verify
+ * bit 1,0 channel
+ */
+ disable_dma(sc->host->dma_channel);
+ set_dma_mode(sc->host->dma_channel, 0x40 | (dir_in ? 0x04 : 0x08));
+ clear_dma_ff(sc->host->dma_channel);
+ set_dma_addr(sc->host->dma_channel, virt_to_phys(sc->SCp.ptr));
+ set_dma_count(sc->host->dma_channel, sc->SCp.this_residual);
+#if 0
+#ifdef DEBUG
+ printk("D%d(%x)D", sc->SCp.this_residual);
+#endif
+#endif
+ enable_dma(sc->host->dma_channel);
+
+ pc980155_dma_enable(sc->host->io_port);
+
+ return 0;
+}
+
+static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *sc, int status){
+ /*
+ * instance: Hostadapter's instance
+ * sc: scsi command
+ * status: True if success
+ */
+
+ pc980155_dma_disable(sc->host->io_port);
+
+ disable_dma(sc->host->dma_channel);
+}
+
+/* return non-zero on detection */
+static inline int pc980155_test_port(wd33c93_regs regs)
+{
+ /* Quick and dirty test for presence of the card. */
+ if (READ_AUX_STAT() == 0xff)
+ return 0;
+ return 1;
+}
+
+static inline int
+pc980155_getconfig(unsigned int base_io, wd33c93_regs regs,
+ unsigned char* irq, unsigned char* dma,
+ unsigned char* scsi_id)
+{
+ static unsigned char irqs[] = { 3, 5, 6, 9, 12, 13 };
+ unsigned char result;
+
+ printk(KERN_DEBUG "PC-9801-55: base_io=%x SASR=%x SCMD=%x\n",
+ base_io, *regs.SASR, *regs.SCMD);
+ result = read_wd33c93(regs, WD_RESETINT);
+ printk(KERN_DEBUG "PC-9801-55: getting config (%x)\n", result);
+ *scsi_id = result & 0x07;
+ *irq = (result >> 3) & 0x07;
+ if (*irq > 5) {
+ printk(KERN_ERR "PC-9801-55 (base %#x): impossible IRQ (%d)"
+ " - other device here?\n", base_io, *irq);
+ return 0;
+ }
+
+ *irq = irqs[*irq];
+ result = inb(REG_STATRD);
+ WAIT();
+ *dma = result & 0x03;
+ if (*dma == 1) {
+ printk(KERN_ERR
+ "PC-9801-55 (base %#x): impossible DMA channl (%d)"
+ " - other device here?\n", base_io, *dma);
+ return 0;
+ }
+#ifdef DEBUG
+ printk("PC-9801-55: end of getconfig\n");
+#endif
+ return 1;
+}
+
+/* return non-zero on detection */
+int scsi_pc980155_detect(Scsi_Host_Template* tpnt)
+{
+ unsigned int base_io;
+ unsigned char irq, dma, scsi_id;
+ int i;
+#ifdef DEBUG
+ unsigned char debug;
+#endif
+
+ for (i = 0; i < nr_base_ios; i++) {
+ base_io = base_ios[i];
+ SASR = REG_ADDRST;
+ SCMD = REG_CONTRL;
+
+ /* printk("PC-9801-55: SASR(%x = %x)\n", SASR, REG_ADDRST); */
+ if (check_region(base_io, 6))
+ continue;
+ if (! pc980155_test_port(regs))
+ continue;
+
+ if (!pc980155_getconfig(base_io, regs, &irq, &dma, &scsi_id))
+ continue;
+#ifdef DEBUG
+ printk("PC-9801-55: config: base io = %x, irq = %d, dma channel = %d, scsi id = %d\n",
+ base_io, irq, dma, scsi_id);
+#endif
+ if (request_irq(irq, pc980155_intr_handle, 0, "PC-9801-55",
+ NULL)) {
+ printk(KERN_ERR
+ "PC-9801-55: unable to allocate IRQ %d\n",
+ irq);
+ continue;
+ }
+ if (request_dma(dma, "PC-9801-55")) {
+ printk(KERN_ERR "PC-9801-55: "
+ "unable to allocate DMA channel %d\n", dma);
+ free_irq(irq, NULL);
+ continue;
+ }
+
+ request_region(base_io, 6, "PC-9801-55");
+ pc980155_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
+ pc980155_host->this_id = scsi_id;
+ pc980155_host->io_port = base_io;
+ pc980155_host->n_io_port = 6;
+ pc980155_host->irq = irq;
+ pc980155_host->dma_channel = dma;
+
+#ifdef DEBUG
+ printk("PC-9801-55: scsi host found at %x irq = %d, use dma channel %d.\n", base_io, irq, dma);
+ debug = read_aux_stat(regs);
+ printk("PC-9801-55: aux: %x ", debug);
+ debug = read_wd33c93(regs, 0x17);
+ printk("status: %x\n", debug);
+#endif
+
+ pc980155_int_enable(regs);
+
+ wd33c93_init(pc980155_host, regs, dma_setup, dma_stop,
+ WD33C93_FS_12_15);
+
+ return 1;
+ }
+
+ printk("PC-9801-55: not found\n");
+ return 0;
+}
+
+int pc980155_proc_info(char *buf, char **start, off_t off, int len,
+ int hostno, int in)
+{
+ /* NOT SUPPORTED YET! */
+
+ if (in) {
+ return -EPERM;
+ }
+ *start = buf;
+ return sprintf(buf, "Sorry, not supported yet.\n");
+}
+
+int pc980155_setup(char *str)
+{
+next:
+ if (!strncmp(str, "io:", 3)){
+ base_ios[0] = simple_strtoul(str+3,NULL,0);
+ nr_base_ios = 1;
+ while (*str > ' ' && *str != ',')
+ str++;
+ if (*str == ','){
+ str++;
+ goto next;
+ }
+ }
+ return 0;
+}
+
+int scsi_pc980155_release(struct Scsi_Host *pc980155_host)
+{
+#ifdef MODULE
+ pc980155_int_disable(regs);
+ release_region(pc980155_host->io_port, pc980155_host->n_io_port);
+ free_irq(pc980155_host->irq, NULL);
+ free_dma(pc980155_host->dma_channel);
+ wd33c93_release();
+#endif
+ return 1;
+}
+
+__setup("pc980155=", pc980155_setup);
+
+Scsi_Host_Template driver_template = SCSI_PC980155;
+
+#include "scsi_module.c"
diff -urN linux/drivers/scsi/pc980155.h linux98/drivers/scsi/pc980155.h
--- linux/drivers/scsi/pc980155.h Thu Jan 1 09:00:00 1970
+++ linux98/drivers/scsi/pc980155.h Sat Nov 2 17:51:18 2002
@@ -0,0 +1,47 @@
+/*
+ * PC-9801-55 SCSI host adapter driver
+ *
+ * Copyright (C) 1997-2000 Kyoto University Microcomputer Club
+ * (Linux/98 project)
+ */
+
+#ifndef _SCSI_PC9801_55_H
+#define _SCSI_PC9801_55_H
+
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <scsi/scsicam.h>
+
+int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+int wd33c93_abort(Scsi_Cmnd *);
+int wd33c93_reset(Scsi_Cmnd *, unsigned int);
+int scsi_pc980155_detect(Scsi_Host_Template *);
+int scsi_pc980155_release(struct Scsi_Host *);
+int pc980155_proc_info(char *, char **, off_t, int, int, int);
+
+#ifndef CMD_PER_LUN
+#define CMD_PER_LUN 2
+#endif
+
+#ifndef CAN_QUEUE
+#define CAN_QUEUE 16
+#endif
+
+#define SCSI_PC980155 { .proc_name = "PC-9801-55", \
+ .name = "SCSI PC-9801-55", \
+ .proc_info = pc980155_proc_info, \
+ .detect = scsi_pc980155_detect, \
+ .release = scsi_pc980155_release, \
+ /* command: use queue command */ \
+ .queuecommand = wd33c93_queuecommand, \
+ /* .abort = wd33c93_abort, */ \
+ /* .reset = wd33c93_reset, */ \
+ .bios_param = pc9800_scsi_bios_param, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN, /* dont use link command */ \
+ .unchecked_isa_dma = 1, /* use dma **XXXX***/ \
+ .use_clustering = ENABLE_CLUSTERING }
+
+#endif /* _SCSI_PC9801_55_H */
diff -urN linux/drivers/scsi/pc980155regs.h linux98/drivers/scsi/pc980155regs.h
--- linux/drivers/scsi/pc980155regs.h Thu Jan 1 09:00:00 1970
+++ linux98/drivers/scsi/pc980155regs.h Mon Dec 3 18:44:10 2001
@@ -0,0 +1,89 @@
+#ifndef __PC980155REGS_H
+#define __PC980155REGS_H
+
+#include "wd33c93.h"
+
+#define REG_ADDRST (base_io+0)
+#define REG_CONTRL (base_io+2)
+#define REG_CWRITE (base_io+4)
+#define REG_STATRD (base_io+4)
+
+#define WD_MEMORYBANK 0x30
+#define WD_RESETINT 0x33
+
+#if 0
+#define WAIT() outb(0x00,0x5f)
+#else
+#define WAIT() do{}while(0)
+#endif
+
+static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num)
+{
+ uchar data;
+ outb(reg_num, *regs.SASR);
+ WAIT();
+ data = inb(*regs.SCMD);
+ WAIT();
+ return data;
+}
+
+static inline uchar read_aux_stat(const wd33c93_regs regs)
+{
+ uchar result;
+ result = inb(*regs.SASR);
+ WAIT();
+ /* printk("PC-9801-55: regp->SASR(%x) = %x\n", regp->SASR, result); */
+ return result;
+}
+#define READ_AUX_STAT() read_aux_stat(regs)
+
+static inline void write_wd33c93(const wd33c93_regs regs, uchar reg_num,
+ uchar value)
+{
+ outb(reg_num, *regs.SASR);
+ WAIT();
+ outb(value, *regs.SCMD);
+ WAIT();
+}
+
+
+#define write_wd33c93_cmd(regs,cmd) write_wd33c93(regs,WD_COMMAND,cmd)
+
+static inline void write_wd33c93_count(const wd33c93_regs regs,
+ unsigned long value)
+{
+ outb(WD_TRANSFER_COUNT_MSB, *regs.SASR);
+ WAIT();
+ outb((value >> 16) & 0xff, *regs.SCMD);
+ WAIT();
+ outb((value >> 8) & 0xff, *regs.SCMD);
+ WAIT();
+ outb( value & 0xff, *regs.SCMD);
+ WAIT();
+}
+
+
+static inline unsigned long read_wd33c93_count(const wd33c93_regs regs)
+{
+unsigned long value;
+
+ outb(WD_TRANSFER_COUNT_MSB, *regs.SASR);
+ value = inb(*regs.SCMD) << 16;
+ value |= inb(*regs.SCMD) << 8;
+ value |= inb(*regs.SCMD);
+ return value;
+}
+
+static inline void write_wd33c93_cdb(const wd33c93_regs regs, unsigned int len,
+ unsigned char cmnd[])
+{
+ int i;
+ outb(WD_CDB_1, *regs.SASR);
+ for (i=0; i<len; i++)
+ outb(cmnd[i], *regs.SCMD);
+}
+
+#define pc980155_int_enable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) | 0x04)
+#define pc980155_int_disable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) & ~0x04)
+
+#endif
diff -urN linux/drivers/scsi/scsi_scan.c linux98/drivers/scsi/scsi_scan.c
--- linux/drivers/scsi/scsi_scan.c Wed Aug 28 09:52:26 2002
+++ linux98/drivers/scsi/scsi_scan.c Wed Aug 28 13:09:39 2002
@@ -131,6 +131,7 @@
{"MITSUMI", "CD-R CR-2201CS", "6119", BLIST_NOLUN}, /* locks up */
{"RELISYS", "Scorpio", NULL, BLIST_NOLUN}, /* responds to all lun */
{"MICROTEK", "ScanMaker II", "5.61", BLIST_NOLUN}, /* responds to all lun */
+ {"NEC", "D3856", "0009", BLIST_NOLUN},
/*
* Other types of devices that have special flags.
diff -urN linux/drivers/scsi/scsi_syms.c linux98/drivers/scsi/scsi_syms.c
--- linux/drivers/scsi/scsi_syms.c Thu Oct 31 13:23:30 2002
+++ linux98/drivers/scsi/scsi_syms.c Sat Nov 2 17:10:31 2002
@@ -95,6 +95,11 @@
EXPORT_SYMBOL(scsi_devicelist);
EXPORT_SYMBOL(scsi_device_types);
+/* For PC-9800 architecture support */
+EXPORT_SYMBOL(pc9800_scsi_bios_param);
+extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *);
+EXPORT_SYMBOL(sd_find_params_by_bdev);
+
/*
* Externalize timers so that HBAs can safely start/restart commands.
*/
diff -urN linux/drivers/scsi/scsicam.c linux98/drivers/scsi/scsicam.c
--- linux/drivers/scsi/scsicam.c Thu Oct 31 09:43:00 2002
+++ linux98/drivers/scsi/scsicam.c Sat Nov 2 22:19:46 2002
@@ -57,6 +57,11 @@
{
unsigned char *p;
int ret;
+ extern int pc98; /* whether PC-9800 or not. */
+
+ if (pc98)
+ if (!pc9800_scsi_bios_param(bdev, capacity, ip))
+ return 0;
p = scsi_bios_ptable(bdev);
if (!p)
@@ -240,3 +245,66 @@
*hds = (unsigned int) heads;
return (rv);
}
+
+#include <asm/pc9800.h>
+
+/* XXX - For now, we assume the first (i.e. having the least host_no)
+ real (i.e. non-emulated) host adapter shall be BIOS-controlled one.
+ We *SHOULD* invent another way. */
+
+static inline struct Scsi_Host *first_real_host(void)
+{
+ struct Scsi_Host *h = NULL;
+
+ while ((h = scsi_host_get_next(h)))
+ if (!h->hostt->emulated)
+ break;
+
+ return h;
+}
+
+extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *);
+
+int pc9800_scsi_bios_param(struct block_device *bdev, sector_t capacity, int *ip)
+{
+ char *name;
+ struct scsi_device *device = sd_find_params_by_bdev(bdev, &name, NULL);
+
+ if (device && first_real_host() == device->host && device->id < 7
+ && __PC9800SCA_TEST_BIT(PC9800SCA_DISK_EQUIPS, device->id))
+ {
+ const u8 *p = (&__PC9800SCA(u8, PC9800SCA_SCSI_PARAMS)
+ + device->id * 4);
+
+ ip[0] = p[1]; /* # of heads */
+ ip[1] = p[0]; /* # of sectors/track */
+ ip[2] = *(u16 *)&p[2] & 0x0FFF; /* # of cylinders */
+ if (p[3] & (1 << 6)) { /* #-of-cylinders is 16-bit */
+ ip[2] |= (ip[0] & 0xF0) << 8;
+ ip[0] &= 0x0F;
+ }
+ printk(KERN_INFO "%s: "
+ "BIOS parameters CHS:%d/%d/%d, %u bytes %s sector\n",
+ name, ip[2], ip[0], ip[1], 256 << ((p[3] >> 4) & 3),
+ p[3] & 0x80 ? "hard" : "soft");
+ return 0;
+ }
+
+ /* Assume PC-9801-92 compatible parameters for HAs without BIOS. */
+ ip[0] = 8;
+ ip[1] = 32;
+ ip[2] = capacity / (8 * 32);
+ if (ip[2] > 65535) { /* if capacity >= 8GB */
+ /* Recent on-board adapters seem to use this parameter. */
+ ip[1] = 128;
+ ip[2] = capacity / (8 * 128);
+ if (ip[2] > 65535) { /* if capacity >= 32GB */
+ /* Clip the number of cylinders. Currently this
+ is the limit that we deal with. */
+ ip[2] = 65535;
+ }
+ }
+ printk(KERN_INFO "%s: BIOS parameters CHS:%d/%d/%d (assumed)\n",
+ name, ip[2], ip[0], ip[1]);
+ return 0;
+}
diff -urN linux/drivers/scsi/sd.c linux98/drivers/scsi/sd.c
--- linux/drivers/scsi/sd.c Thu Oct 31 13:23:30 2002
+++ linux98/drivers/scsi/sd.c Sat Nov 2 17:08:40 2002
@@ -193,6 +193,7 @@
case HDIO_GETGEO: /* Return BIOS disk parameters */
{
struct hd_geometry *loc = (struct hd_geometry *)arg;
+ extern int pc98;
if (!loc)
return -EINVAL;
@@ -208,7 +209,7 @@
/* override with calculated, extended default,
or driver values */
- if (host->hostt->bios_param) {
+ if (!pc98 && host->hostt->bios_param) {
host->hostt->bios_param(sdp, bdev,
capacity, diskinfo);
} else
@@ -1315,6 +1316,27 @@
kfree(sdkp);
}
+struct scsi_device *sd_find_params_by_bdev(struct block_device *bdev, char **disk_name, sector_t *capacity)
+{
+ struct scsi_disk *sdkp;
+ int major = major(to_kdev_t(bdev->bd_dev));
+
+ spin_lock(&sd_devlist_lock);
+ list_for_each_entry(sdkp, &sd_devlist, list) {
+ if (sdkp->disk->major == major) {
+ if (capacity)
+ *capacity = sdkp->capacity;
+ if (disk_name)
+ *disk_name = sdkp->disk->disk_name;
+ spin_unlock(&sd_devlist_lock);
+ return sdkp->device;
+ }
+ }
+
+ spin_unlock(&sd_devlist_lock);
+ return NULL;
+}
+
/**
* init_sd - entry point for this driver (both when built in or when
* a module).
diff -urN linux/drivers/scsi/wd33c93.c linux98/drivers/scsi/wd33c93.c
--- linux/drivers/scsi/wd33c93.c Sat Oct 19 13:02:24 2002
+++ linux98/drivers/scsi/wd33c93.c Tue Oct 29 15:44:15 2002
@@ -84,6 +84,7 @@
#include <linux/init.h>
#include <asm/irq.h>
#include <linux/blk.h>
+#include <linux/spinlock.h>
#include "scsi.h"
#include "hosts.h"
@@ -173,7 +174,11 @@
MODULE_PARM(setup_strings, "s");
#endif
+static spinlock_t wd_lock = SPIN_LOCK_UNLOCKED;
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+#include "pc980155regs.h"
+#else /* !CONFIG_SCSI_PC980155 */
static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num)
{
@@ -203,6 +208,7 @@
*regs.SCMD = cmd;
mb();
}
+#endif /* CONFIG_SCSI_PC980155 */
static inline uchar read_1_byte(const wd33c93_regs regs)
@@ -220,6 +226,7 @@
return x;
}
+#if !defined(CONFIG_SCSI_PC980155) && !defined(CONFIG_SCSI_PC980155_MODULE)
static void write_wd33c93_count(const wd33c93_regs regs, unsigned long value)
{
@@ -244,6 +251,7 @@
mb();
return value;
}
+#endif /* !CONFIG_SCSI_PC980155 */
/* The 33c93 needs to be told which direction a command transfers its
@@ -385,8 +393,7 @@
* sense data is not lost before REQUEST_SENSE executes.
*/
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&wd_lock, flags);
if (!(hostdata->input_Q) || (cmd->cmnd[0] == REQUEST_SENSE)) {
cmd->host_scribble = (uchar *)hostdata->input_Q;
@@ -407,7 +414,7 @@
DB(DB_QUEUE_COMMAND,printk(")Q-%ld ",cmd->pid))
- restore_flags(flags);
+ spin_unlock_irqrestore(&wd_lock, flags);
return 0;
}
@@ -428,7 +435,6 @@
struct WD33C93_hostdata *hostdata = (struct WD33C93_hostdata *)instance->hostdata;
const wd33c93_regs regs = hostdata->regs;
Scsi_Cmnd *cmd, *prev;
-int i;
DB(DB_EXECUTE,printk("EX("))
@@ -591,9 +597,16 @@
* (take advantage of auto-incrementing)
*/
- *regs.SASR = WD_CDB_1;
- for (i=0; i<cmd->cmd_len; i++)
- *regs.SCMD = cmd->cmnd[i];
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+ write_wd33c93_cdb(regs, cmd->cmd_len, cmd->cmnd);
+#else /* !CONFIG_SCSI_PC980155 */
+ {
+ int i;
+ *regs.SASR = WD_CDB_1;
+ for (i = 0; i < cmd->cmd_len; i++)
+ *regs.SCMD = cmd->cmnd[i];
+ }
+#endif /* CONFIG_SCSI_PC980155 */
/* The wd33c93 only knows about Group 0, 1, and 5 commands when
* it's doing a 'select-and-transfer'. To be safe, we write the
@@ -765,7 +778,7 @@
if (!(asr & ASR_INT) || (asr & ASR_BSY))
return;
- save_flags(flags);
+ local_save_flags(flags);
#ifdef PROC_STATISTICS
hostdata->int_cnt++;
@@ -831,7 +844,7 @@
* is here...
*/
- restore_flags(flags);
+ local_irq_restore(flags);
/* We are not connected to a target - check to see if there
* are commands waiting to be executed.
@@ -1085,7 +1098,7 @@
write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
hostdata->state = S_CONNECTED;
}
- restore_flags(flags);
+ local_irq_restore(flags);
break;
@@ -1117,7 +1130,7 @@
/* We are no longer connected to a target - check to see if
* there are commands waiting to be executed.
*/
- restore_flags(flags);
+ local_irq_restore(flags);
wd33c93_execute(instance);
}
else {
@@ -1200,7 +1213,7 @@
* there are commands waiting to be executed.
*/
/* look above for comments on scsi_done() */
- restore_flags(flags);
+ local_irq_restore(flags);
wd33c93_execute(instance);
break;
@@ -1228,7 +1241,7 @@
else
cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
cmd->scsi_done(cmd);
- restore_flags(flags);
+ local_irq_restore(flags);
break;
case S_PRE_TMP_DISC:
case S_RUNNING_LEVEL2:
@@ -1693,7 +1706,7 @@
return 1;
}
-__setup("wd33c93", wd33c93_setup);
+__setup("wd33c93=", wd33c93_setup);
/* check_setup_args() returns index if key found, 0 if not
@@ -1831,10 +1844,9 @@
{ unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&wd_lock, flags);
reset_wd33c93(instance);
- restore_flags(flags);
+ spin_unlock_irqrestore(&wd_lock, flags);
}
printk("wd33c93-%d: chip=%s/%d no_sync=0x%x no_dma=%d",instance->host_no,
@@ -1929,8 +1941,7 @@
return len;
}
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&wd_lock, flags);
bp = buf;
*bp = '\0';
if (hd->proc & PR_VERSION) {
@@ -2005,7 +2016,7 @@
}
}
strcat(bp,"\n");
- restore_flags(flags);
+ spin_unlock_irqrestore(&wd_lock, flags);
*start = buf;
if (stop) {
stop = 0;
@@ -2034,4 +2045,10 @@
MOD_DEC_USE_COUNT;
}
+EXPORT_SYMBOL(wd33c93_reset);
+EXPORT_SYMBOL(wd33c93_init);
+EXPORT_SYMBOL(wd33c93_release);
+EXPORT_SYMBOL(wd33c93_abort);
+EXPORT_SYMBOL(wd33c93_queuecommand);
+EXPORT_SYMBOL(wd33c93_intr);
MODULE_LICENSE("GPL");
diff -urN linux/drivers/scsi/wd33c93.h linux98/drivers/scsi/wd33c93.h
--- linux/drivers/scsi/wd33c93.h Sat Oct 12 13:21:35 2002
+++ linux98/drivers/scsi/wd33c93.h Sat Oct 12 14:18:53 2002
@@ -186,8 +186,13 @@
/* This is what the 3393 chip looks like to us */
typedef struct {
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+ volatile unsigned int *SASR;
+ volatile unsigned int *SCMD;
+#else
volatile unsigned char *SASR;
volatile unsigned char *SCMD;
+#endif
} wd33c93_regs;
diff -urN linux/include/scsi/scsicam.h linux98/include/scsi/scsicam.h
--- linux/include/scsi/scsicam.h Thu Oct 31 13:23:43 2002
+++ linux98/include/scsi/scsicam.h Fri Nov 1 14:37:33 2002
@@ -16,4 +16,6 @@
extern int scsi_partsize(unsigned char *buf, unsigned long capacity,
unsigned int *cyls, unsigned int *hds, unsigned int *secs);
extern unsigned char *scsi_bios_ptable(struct block_device *bdev);
+extern int pc9800_scsi_bios_param(struct block_device *bdev, sector_t capacity,
+ int *ip);
#endif /* def SCSICAM_H */
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 16/17] support PC-9800 against 2.5.45-ac1 (serial)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (14 preceding siblings ...)
2002-11-06 18:53 ` [PATCHSET 15/17] support PC-9800 against 2.5.45-ac1 (SCSI) Osamu Tomita
@ 2002-11-06 18:56 ` Osamu Tomita
2002-11-06 18:58 ` [PATCHSET 17/17] support PC-9800 against 2.5.45-ac1 (SMP) Osamu Tomita
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:56 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 206 bytes --]
This patch adds serial and modem card support for PC-9800.
diffstat:
drivers/serial/8250_pnp.c | 7 +++++++
include/asm-i386/serial.h | 7 +++++++
2 files changed, 14 insertions(+)
--
Osamu Tomita
[-- Attachment #2: serial.patch --]
[-- Type: text/plain, Size: 1625 bytes --]
diff -urN linux/drivers/serial/8250_pnp.c linux98/drivers/serial/8250_pnp.c
--- linux/drivers/serial/8250_pnp.c Sat Oct 19 13:01:08 2002
+++ linux98/drivers/serial/8250_pnp.c Sat Oct 19 16:20:53 2002
@@ -193,6 +193,8 @@
{ "MVX00A1", 0 },
/* PC Rider K56 Phone System PnP */
{ "MVX00F2", 0 },
+ /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
+ { "nEC8241", 0 },
/* Pace 56 Voice Internal Plug & Play Modem */
{ "PMC2430", 0 },
/* Generic */
@@ -376,7 +378,12 @@
((port->min == 0x2f8) ||
(port->min == 0x3f8) ||
(port->min == 0x2e8) ||
+#ifndef CONFIG_PC9800
(port->min == 0x3e8)))
+#else
+ (port->min == 0x3e8) ||
+ (port->min == 0x8b0)))
+#endif
return 0;
}
diff -urN linux/include/asm-i386/serial.h linux98/include/asm-i386/serial.h
--- linux/include/asm-i386/serial.h Wed Oct 16 12:27:56 2002
+++ linux98/include/asm-i386/serial.h Fri Oct 18 10:12:09 2002
@@ -50,12 +50,19 @@
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+#ifndef CONFIG_PC9800
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
+#else
+#define STD_SERIAL_PORT_DEFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x30, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x238, 5, STD_COM_FLAGS }, /* ttyS1 */
+#endif /* CONFIG_PC9800 */
#ifdef CONFIG_SERIAL_MANY_PORTS
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCHSET 17/17] support PC-9800 against 2.5.45-ac1 (SMP)
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
` (15 preceding siblings ...)
2002-11-06 18:56 ` [PATCHSET 16/17] support PC-9800 against 2.5.45-ac1 (serial) Osamu Tomita
@ 2002-11-06 18:58 ` Osamu Tomita
16 siblings, 0 replies; 21+ messages in thread
From: Osamu Tomita @ 2002-11-06 18:58 UTC (permalink / raw)
To: Alan Cox; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 439 bytes --]
This patch adds SMP support for PC-9800.
diffstat:
arch/i386/kernel/apic.c | 16 +++++++++++++---
arch/i386/kernel/io_apic.c | 25 +++++++++++++++++++++++--
arch/i386/kernel/mpparse.c | 35 ++++++++++++++++++++++++++++++++++-
arch/i386/kernel/smpboot.c | 14 ++++++++++++++
include/asm-i386/mpspec.h | 4 +++-
include/asm-i386/smpboot.h | 9 +++++++++
6 files changed, 96 insertions(+), 7 deletions(-)
--
Osamu Tomita
[-- Attachment #2: smp.patch --]
[-- Type: text/plain, Size: 8370 bytes --]
diff -urN linux/arch/i386/kernel/apic.c linux98/arch/i386/kernel/apic.c
--- linux/arch/i386/kernel/apic.c Wed Oct 16 13:20:29 2002
+++ linux98/arch/i386/kernel/apic.c Wed Oct 16 15:40:20 2002
@@ -33,6 +33,8 @@
#include <asm/arch_hooks.h>
#include "mach_apic.h"
+#include "io_ports.h"
+
void __init apic_intr_init(void)
{
#ifdef CONFIG_SMP
@@ -135,9 +137,13 @@
* PIC mode, enable APIC mode in the IMCR, i.e.
* connect BSP's local APIC to INT and NMI lines.
*/
+#ifndef CONFIG_PC9800
printk("leaving PIC mode, enabling APIC mode.\n");
outb(0x70, 0x22);
outb(0x01, 0x23);
+#else
+ printk("On NEC98, Changing mode from PIC to APIC isNOT supported yet.\n");
+#endif
}
}
@@ -150,9 +156,13 @@
* interrupts, including IPIs, won't work beyond
* this point! The only exception are INIT IPIs.
*/
+#ifndef CONFIG_PC9800
printk("disabling APIC mode, entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
+#else
+ printk("On NEC98, Changing mode from APIC to PIC isNOT supported yet.\n");
+#endif
}
}
@@ -759,9 +769,9 @@
spin_lock_irqsave(&i8253_lock, flags);
- outb_p(0x00, 0x43);
- count = inb_p(0x40);
- count |= inb_p(0x40) << 8;
+ outb_p(0x00, PIT_MODE);
+ count = inb_p(PIT_CH0);
+ count |= inb_p(PIT_CH0) << 8;
spin_unlock_irqrestore(&i8253_lock, flags);
diff -urN linux/arch/i386/kernel/io_apic.c linux98/arch/i386/kernel/io_apic.c
--- linux/arch/i386/kernel/io_apic.c Sat Oct 19 13:01:22 2002
+++ linux98/arch/i386/kernel/io_apic.c Sat Oct 19 16:22:51 2002
@@ -37,6 +37,8 @@
#include <asm/desc.h>
#include "mach_apic.h"
+#include "io_ports.h"
+
#undef APIC_LOCKUP_DEBUG
#define APIC_LOCKUP_DEBUG
@@ -354,7 +356,9 @@
if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+ mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+ ) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
@@ -448,6 +452,12 @@
#define default_MCA_trigger(idx) (1)
#define default_MCA_polarity(idx) (0)
+/* NEC98 interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_NEC98_trigger(idx) (0)
+#define default_NEC98_polarity(idx) (0)
+
static int __init MPBIOS_polarity(int idx)
{
int bus = mp_irqs[idx].mpc_srcbus;
@@ -482,6 +492,11 @@
polarity = default_MCA_polarity(idx);
break;
}
+ case MP_BUS_NEC98: /* NEC 98 pin */
+ {
+ polarity = default_NEC98_polarity(idx);
+ break;
+ }
default:
{
printk(KERN_WARNING "broken BIOS!!\n");
@@ -551,6 +566,11 @@
trigger = default_MCA_trigger(idx);
break;
}
+ case MP_BUS_NEC98: /* NEC 98 pin */
+ {
+ trigger = default_NEC98_trigger(idx);
+ break;
+ }
default:
{
printk(KERN_WARNING "broken BIOS!!\n");
@@ -612,6 +632,7 @@
case MP_BUS_ISA: /* ISA pin */
case MP_BUS_EISA:
case MP_BUS_MCA:
+ case MP_BUS_NEC98:
{
irq = mp_irqs[idx].mpc_srcbusirq;
break;
@@ -1718,7 +1739,7 @@
* Additionally, something is definitely wrong with irq9
* on PIIX4 boards.
*/
-#define PIC_IRQS (1<<2)
+#define PIC_IRQS (1 << PIC_CASCADE_IR)
void __init setup_IO_APIC(void)
{
diff -urN linux/arch/i386/kernel/mpparse.c linux98/arch/i386/kernel/mpparse.c
--- linux/arch/i386/kernel/mpparse.c Wed Oct 16 13:20:29 2002
+++ linux98/arch/i386/kernel/mpparse.c Wed Oct 16 15:40:20 2002
@@ -236,6 +236,8 @@
mp_current_pci_id++;
} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
+ } else if (strncmp(str, BUSTYPE_NEC98, sizeof(BUSTYPE_NEC98)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_NEC98;
} else {
printk("Unknown bustype %s - ignoring\n", str);
}
@@ -681,7 +683,12 @@
* Read the physical hardware table. Anything here will
* override the defaults.
*/
- if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+#ifndef CONFIG_PC9800
+ if (!smp_read_mpc((void *)mpf->mpf_physptr))
+#else
+ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr)))
+#endif
+ {
smp_found_config = 0;
printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
@@ -735,8 +742,30 @@
printk("found SMP MP-table at %08lx\n",
virt_to_phys(mpf));
reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
+#ifndef CONFIG_PC9800
if (mpf->mpf_physptr)
reserve_bootmem(mpf->mpf_physptr, PAGE_SIZE);
+#else
+ /*
+ * PC-9800's MPC table places on the very last of
+ * physical memory; so that simply reserving PAGE_SIZE
+ * from mpg->mpf_physptr yields BUG() in
+ * reserve_bootmem.
+ */
+ if (mpf->mpf_physptr) {
+ /*
+ * We cannot access to MPC table to compute
+ * table size yet, as only few megabytes from
+ * the bottom is mapped now.
+ */
+ unsigned long size = PAGE_SIZE;
+ unsigned long end = max_low_pfn * PAGE_SIZE;
+ if (mpf->mpf_physptr + size > end)
+ size = end - mpf->mpf_physptr;
+ reserve_bootmem(mpf->mpf_physptr, size);
+ }
+#endif
+
mpf_found = mpf;
return 1;
}
@@ -748,7 +777,9 @@
void __init find_smp_config (void)
{
+#ifndef CONFIG_PC9800
unsigned int address;
+#endif
/*
* FIXME: Linux assumes you have 640K of base ram..
@@ -762,6 +793,7 @@
smp_scan_config(639*0x400,0x400) ||
smp_scan_config(0xF0000,0x10000))
return;
+#ifndef CONFIG_PC9800 /* PC-9800 has no EBDA area? */
/*
* If it is an SMP machine we should know now, unless the
* configuration is in an EISA/MCA bus machine with an
@@ -784,6 +816,7 @@
smp_scan_config(address, 0x400);
if (smp_found_config)
printk(KERN_WARNING "WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!\n");
+#endif
}
diff -urN linux/arch/i386/kernel/smpboot.c linux98/arch/i386/kernel/smpboot.c
--- linux/arch/i386/kernel/smpboot.c Tue Nov 5 10:16:18 2002
+++ linux98/arch/i386/kernel/smpboot.c Wed Nov 6 11:00:03 2002
@@ -856,13 +856,27 @@
nmi_low = *((volatile unsigned short *) TRAMPOLINE_LOW);
}
+#ifndef CONFIG_PC9800
CMOS_WRITE(0xa, 0xf);
+#else
+ /* reset code is stored in 8255 on PC-9800. */
+ outb(0x0e, 0x37); /* SHUT0 = 0 */
+#endif
local_flush_tlb();
Dprintk("1.\n");
*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
Dprintk("2.\n");
*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
Dprintk("3.\n");
+#ifdef CONFIG_PC9800
+ /*
+ * On PC-9800, continuation on warm reset is done by loading
+ * %ss:%sp from 0x0000:0404 and executing 'lret', so:
+ */
+ /* 0x3f0 is on unused interrupt vector and should be safe... */
+ *((volatile unsigned long *) phys_to_virt(0x404)) = 0x000003f0;
+ Dprintk("4.\n");
+#endif
/*
* Be paranoid about clearing APIC errors.
diff -urN linux/include/asm-i386/mpspec.h linux98/include/asm-i386/mpspec.h
--- linux/include/asm-i386/mpspec.h Fri Apr 12 13:58:13 2002
+++ linux98/include/asm-i386/mpspec.h Fri Apr 12 14:02:42 2002
@@ -105,6 +105,7 @@
#define BUSTYPE_TC "TC"
#define BUSTYPE_VME "VME"
#define BUSTYPE_XPRESS "XPRESS"
+#define BUSTYPE_NEC98 "NEC98"
struct mpc_config_ioapic
{
@@ -195,7 +196,8 @@
MP_BUS_ISA = 1,
MP_BUS_EISA,
MP_BUS_PCI,
- MP_BUS_MCA
+ MP_BUS_MCA,
+ MP_BUS_NEC98
};
extern int mp_bus_id_to_type [MAX_MP_BUSSES];
extern int mp_bus_id_to_node [MAX_MP_BUSSES];
diff -urN linux/include/asm-i386/smpboot.h linux98/include/asm-i386/smpboot.h
--- linux/include/asm-i386/smpboot.h Sat Oct 12 13:22:19 2002
+++ linux98/include/asm-i386/smpboot.h Sat Oct 12 19:33:46 2002
@@ -13,8 +13,17 @@
#define TRAMPOLINE_LOW phys_to_virt(0x8)
#define TRAMPOLINE_HIGH phys_to_virt(0xa)
#else /* !CONFIG_CLUSTERED_APIC */
+ #ifndef CONFIG_PC9800
#define TRAMPOLINE_LOW phys_to_virt(0x467)
#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+ #else /* CONFIG_PC9800 */
+ /*
+ * On PC-9800, continuation on warm reset is done by loading
+ * %ss:%sp from 0x0000:0404 and executing 'lret', so:
+ */
+ #define TRAMPOLINE_LOW phys_to_virt(0x4fa)
+ #define TRAMPOLINE_HIGH phys_to_virt(0x4fc)
+ #endif /* !CONFIG_PC9800 */
#endif /* CONFIG_CLUSTERED_APIC */
#ifdef CONFIG_CLUSTERED_APIC
^ permalink raw reply [flat|nested] 21+ messages in thread