Problem with USB]

Problem with USB]

[Gustavo Puche Rodríguez]

    I have a 2.4.18 kernel and a motherboar EliteGroup K76SA, in the 
boot messages apear a failure with the USB. This failure can be seen below:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe08b7000, IRQ 9
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
usb-ohci.c: USB OHCI at membase 0xe08b9000, IRQ 5
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
usb.c: registered new driver usblp
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
 
Can anybody tell me if there is a fix of the BIOS or same other help?

ThanKs!!!

    Gus.

Re: Problem with USB]

[Greg KH]

On Mon, Nov 18, 2002 at 12:35:30AM +0100, Gustavo Puche Rodríguez wrote:
> 
> 
>    I have a 2.4.18 kernel and a motherboar EliteGroup K76SA, in the 
> boot messages apear a failure with the USB. This failure can be seen below:

Please see the FAQ at http://www.linux-usb.org/ for more info on this
problem (in short, it's a interrupt routing problem, not a USB one.)

thanks,

greg k-h